- 25 7月, 2009 3 次提交
-
-
由 Guido Günther 提交于
-
由 Daniel P. Berrange 提交于
* autobuild.sh: Disable esx/phyp build on mingw32 * configure.in: Fix handling of --without-phyp so it actually works * libvirt.spec.in: Add missing interface.rng * mingw32-libvirt.spec.in: Disable phyp/esx drivers * src/phyp/phyp_driver.c: Fix missing i18n of error messages
-
由 Pritesh Kothari 提交于
* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the 3.0 driver * src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for VirtualBox 3.0 * src/vbox/vbox_tmpl.c: handle the new driver and add event support * src/Makefile.am: plug in the new module
-
- 24 7月, 2009 13 次提交
-
-
由 Daniel P. Berrange 提交于
* src/cgroup.c: Fix cast to uint64 from unsigned long long
-
由 Daniel Veillard 提交于
-
由 Eduardo Otubo 提交于
Features supported: - Connects to HMC/VIOS or IVM systems. - Life cycle commands (resume and shutdown). - dumpxml - 'list' and 'list --all' What is being implemented: - better and centralized control for UUID - definexml - CPU management commands * src/domain_conf.c src/domain_conf.h: first version of the driver * configure.in src/Makefile.am include/libvirt/virterror.h src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver in the general framework
-
由 Jim Meyering 提交于
* docs/downloads.html.in: but will remain for sake of old links.
-
由 Daniel Veillard 提交于
-
由 Matthias Bolte 提交于
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client to talk to the VI services on ESX nodes. * configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h src/libvirt.c src/virterror.c: glue in the new driver
-
由 Daniel P. Berrange 提交于
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl' parameters * src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params for cgroups * src/qemu_driver.c: Only use cgroups controllers that are activated, and use configured device whitelist instead of default, if set.
-
由 Daniel P. Berrange 提交于
* src/qemu_driver.c: Set a restrictive block device whitelist for all QEMU guests. Update whitelist when hotplugging disks. * src/cgroup.h, src/cgroup.c: Add some more convenience methods for dealing with block device whitelists.
-
由 Daniel P. Berrange 提交于
* src/qemu_driver.c: Add driver methods qemuGetSchedulerType, qemuGetSchedulerParameters, qemuSetSchedulerParameters * src/lxc_driver.c: Fix to use unsigned long long consistently for schedular parameters * src/cgroup.h, src/cgroup.c: Fix cpu_shares to take unsigned long long * src/util.c, src/util.h, src/libvirt_private.syms: Add a virStrToDouble helper * src/virsh.c: Fix handling of --set arg to schedinfo command to honour the designated data type of each schedular tunable as declared by the driver
-
由 Daniel P. Berrange 提交于
* src/qemu_driver.c: Place guest in cgroup upon startup. Remove cgroup upon shutdown
-
由 Daniel P. Berrange 提交于
Allow the driver level cgroup to be managed explicitly by the hypervisor drivers, in order to detect whether to enable or disable cgroup support for domains. Provides better error reporting of failures. Also allow for creation of cgroups for unprivileged drivers if controller is accessible by the user. * src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup * src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c: Obtain a driver cgroup at startup and use that instead of re-creating everytime. * src/util.c, src/util.h, src/libvirt_private.syms: Add a virGetUserName() helper
-
由 Daniel P. Berrange 提交于
* src/cgroup.c: Detect the mount location of every controller at time a virCgroupPtr is created. Detect current process' placement within group to avoid assuming it is in the root. Pass controller ID into SetValueStr/GetValueStr to enable much duplicated code to be eliminated
-
由 Laine Stump 提交于
* src/datatypes.c src/domain_conf.c src/interface_conf.c src/lxc_driver.c src/qemu_driver.c src/storage_backend.c src/virsh.c: add bare %s format string to printf-derivatives called with no format string
-
- 23 7月, 2009 9 次提交
-
-
由 Daniel P. Berrange 提交于
* src/security_selinux.c: Skip relabelling of shared/readonly disks upon shutdown, since this breaks other VMs still active using those disks
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
* src/lxc_driver.c: Implement support for domain autostart
-
由 Daniel P. Berrange 提交于
* src/lxc_conf.h: Add queue for dispatch of domain events * src/lxc_driver.c: Trigger domain events upon important lifecycle transitions
-
由 Daniel P. Berrange 提交于
GCC >= 4.4 assumes the 'printf' attribute refers to the native runtime libraries format specifiers. Thanks to gnulib, libvirt has GNU format specifiers everywhere. This means we need to use 'gnu_printf' with GCC >= 4.4 to get correct compiler checking of printf format specifiers. * HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF * autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula driver on mingw32 builds * qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h, src/logging.h, src/security.h, src/sexpr.h, src/util.h, src/virterror_internal.h, src/xend_internal.c: Change over to ATTRIBUTE_FMT_PRINTF. * src/virsh.c: Disable 'cd' and 'pwd' commands on Win32 since they don't compile * src/threads-win32.c: Add missing return value check
-
由 Jim Paris 提交于
If the qemu binary supports "-no-kvm" and/or "-no-kqemu", they should always be added for plain "qemu" domains. Previously, we omitted them whenever the host and guest architectures implied that they would be disabled automatically, but that logic was flawed in some cases (such as i686 and x86_64). * src/qemu_conf.c: fix the conditions for adding "-no-kvm" and/or "-no-kqemu"
-
由 Laine Stump 提交于
* src/datatypes.c: more cleanup, where lock must be released before calling error handling which tries to get it.
-
由 Laine Stump 提交于
* qemud/remote.c src/interface_conf.[ch] src/veth.[ch]: more renaming from interface to iface
-
- 22 7月, 2009 15 次提交
-
-
由 Nguyen Anh Quynh 提交于
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek * src/libvirt.c: update the front-end checking * src/qemu_driver.c: extend the QEmu driver
-
由 Jim Meyering 提交于
* docs/schemas/Makefile.am (schema_DATA): Add interface.rng.
-
由 Jim Meyering 提交于
* tests/Makefile.am (EXTRA_DIST): Add interfaceschemadata.
-
由 Laine Stump 提交于
* src/datatypes.c: fix a lock problem on error handling, as the error report takes the lock, it must be released before, fixes the problem but just for Interface objects
-
由 Laine Stump 提交于
* src/datatypes.c: handle the nasty case where an interface mac address change, while it's already in use
-
由 Laine Stump 提交于
* virsh.c: fix a number of leaks of virDomain, virStoragePool, virNodeDevice, etc.
-
由 Daniel P. Berrange 提交于
-
由 Mark McLoughlin 提交于
qemu network devices are hot-unplugged in two stages - first the PCI NIC is removed using 'pci_del <pci_addr>' and then the backend is removed using 'host_net_remove <vlan> <name>'. In order to perform these operations we need to have retained the PCI address, backend name and vlan number. * src/qemu_driver.c: add qemudDomainDetachNetDevice()
-
由 Mark McLoughlin 提交于
When we pci_add a NIC, we need to retain the PCI address assigned by qemu for using during detach. * src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI address from the pci_add reply * src/domain_conf.c: handle storing and parsing the PCI address in the domain state XML file
-
由 Mark McLoughlin 提交于
The current code for parsing pci_add replies ignores the the domain and bus numbers. Re-write the code to rectify that. Also, since pci_add is used for NIC hotplug as well ask disk hotplug, re-factor the code into a separate function. * src/qemu_driver.c: add qemudParsePciAddReply() function which can handle parsing domain and bus numbers
-
由 Mark McLoughlin 提交于
If we fail to pci_add a NIC, we should remove the network backend and leave things the way we found them. To do that, we pre-allocate a host_net_remove monitor command and issue that if the pci_add fails. If the remove fails, we just log a warning. We can only do this if we have a name for the network backend and we know the vlan number its associated with. * src/qemu_driver.c: host_net_remove the network backend if the pci_add fails
-
由 Mark McLoughlin 提交于
Implement basic NIC hotplug support using the 'host_net_add' and 'pci_add' qemu monitor commands. For now, we don't support 'bridge' or 'network' types. Also, if pci_add fails, we currently fail to remove the backend which we added. Finally, NIC hot-unplug support is missing. * src/qemu_driver.c: add qemudDomainAttachNetDevice() * src/qemu_conf.[ch]: export qemuBuildNicStr(), qemuBuildHostNetStr() and qemuAssignNames() * src/libvirt_private.syms: export virDomainNetTypeToString()
-
由 Mark McLoughlin 提交于
qemudDomainChangeEjectableMedia() currently extracts the qemu command line flags, but other device attaching code might need it, so move the qemudExtractVersionInfo() call up a frame. * src/qemu_driver.c: move the qemudExtractVersionInfo() call from qemudDomainChangeEjectableMedia() to qemudDomainAttachDevice()
-
由 Mark McLoughlin 提交于
Currently, an interface's vlan number corresponds to its index in the table of network interfaces. That is no longer true when we allow devices to be removed. To fix this, we store the vlan number in the domain's state XML so that it survives libvirtd restarts. * src/domain_conf.h: add vlan number to virDomainNetDef * src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting to -1 if this is state saved by a previous version of libvirt * src/qemu_conf.c: assign vlan numbers before starting qemu
-
由 Mark McLoughlin 提交于
The qemu driver needs to assign and keep track of identifiers for network devices so that it can remove them. We need to keep this state across libvirtd restarts, but it's not configuration that needs to be kept across guest restarts. * src/domain_conf.c: parse and format <state nic="foo" hostnet="bar"/>
-