Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.

It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically we have used a bare lxc:/// URI for connecting to LXC. This
is different from our practice with QEMU, UML, Parallels, Libxl, BHyve
and VirtualBox drivers, which all use a path of '/system' or '/session'
or both.

By making LXC allow '/system', we have fully standardized on the use of
either '/system' or '/session' for all the stateful drivers that run
inside libvirtd.

Support for lxc:/// is of course maintained for back-compat.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.

This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.

Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Now that we assume QEMU_CAPS_NETDEV, the only thing left to check
is whether we need to use the legacy -net syntax because of
a non-conforming armchitecture.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Now that we assume -netdev support, we no longer set the VLAN
or need the hostPlugged bool.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Supported since QEMU 0.13, but we require QEMU 1.5.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Unused as of commit <1e9a0837>.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

In 2ada9ef1 we've tried to turn virDomainChrSourceDef into
virObject. Well, this requires 'virObject' member to be stored on
the first position of the struct. This adjustment is missing in
the original commit leading to all sorts of funny memleaks and
data corruptions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Due to mediation of socket and signal activity currently qemu:///session
connections calling qemu_bridge_helper fail.

We need the profile for libvirtd itself and the subprofile for
qemu-bridge-helper to be able to talk/notify to each other via unix socket and
signals.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1754871Signed-off-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

This is a global variable, but it isn't accessible from outside
of the file its declared in.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

All Xen PV and HVM with PV driver support a memory balloon device,
which cannot be disabled through the toolstack. Model the device
in the libxl driver, similar to the recently removed xend-based
driver.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

For openvzDomObjFromDomainLocked and openvzDomainLookupByID
let's return a locked and referenced @vm object so that callers
can then use the common and more consistent virDomainObjEndAPI
in order to handle cleanup rather than needing to know that the
returned object is locked and calling virObjectUnlock.

The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

If openvzDomainLookupByID or openvzDomainLookupByName fails
to find a vm, let's be a bit more descriptive by providing
the failing id or name in the error message.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Rather than repeat code throughout, create and use a couple of
accessors in order to lookup by UUID.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

The virDomainObjListRemove will return an unlocked
@vm after calling with a reffed object, thus prior
to calling virDomainObjEndAPI we should relock.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

In error paths, if we call virDomainObjListRemove we will leak
the @vm because we have called with a reffed and locked @vm.
So rather than set it to NULL, relock the @vm and allow the
virDomainObjEndAPI to perform the magic of Unlock/Unref.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

For bhyveDomObjFromDomain, bhyveDomainLookupByUUID, and
bhyveDomainLookupByID let's return a locked and referenced
@vm object so that callers can then use the common and more
consistent virDomainObjEndAPI in order to handle cleanup rather
than needing to know that the returned object is locked and
calling virObjectUnlock.

The LookupByName already returns the ref counted and locked object,
so this will make things more consistent.

For bhyveDomainUndefine and bhyveDomainDestroy since the
virDomainObjListRemove will return an unlocked object, we need to
relock before making the EndAPI call.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Up until now we have only formatted non-default GIC versions on
the command line, in order to maintain compatibility with older
QEMU versions that didn't implement the gic-version option to
begin with; however, doing so is entirely unnecessary for newer
QEMU versions, where the option is available. Moreover, having
the GIC version formatted on the command line at all times
ensures that QEMU changing its own defaults doesn't affect the
ABI of libvirt guests.

A few test cases are removed to avoid extra churn. It doesn't
matter for coverage, as those scenarios are already covered by
other parts of the test suite.

This patch is better viewed with 'git show -w'.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This is the responsability of the caller to apply the correct lock
before using these functions. Moreover, the use of a simple boolean
was still racy: two threads may check the boolean and "lock" it
simultaneously.

Users of functions from src/util/virhash.c have to be checked for
correctness. Lookups and iteration should hold a RO
lock. Modifications should hold a RW lock.

Most important uses seem to be covered. Callers have now a greater
responsability, notably the ability to execute some operations while
iterating were reliably forbidden before are now accepted.
Signed-off-by: NVincent Bernat <vincent@bernat.im>

For patches pushed upstream we want builds run on master branch, but
don't want them run on the -maint branches, as we are not keeping the
.travis.yml file on stable branches updated wrt latest needs of travis
CI platforms.

We can't just whitelist 'master' though, because that will prevent
developers triggering their own private travis builds. So we just
blacklist *-maint, since developers will typically use named feature
branches for any work.
Reviewed-by: NPavel Hrdina <phrdina@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This patch adds support to qcow2 formatted filesystem object storage by
instructing qemu-img to build them with preallocation=falloc whenever the
XML described storage <allocation> matches its <capacity>.  For all other
cases the filesystem stored objects are built with preallocation=metadata.
Signed-off-by: NWim ten Have <wim.ten.have@oracle.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

According to the policy described on https://libvirt.org/platforms.html
the QEMU versions in the oldest relevant releses are:

  SLES 12: 2.0.0
  RHEL 7: 1.5.3
  Ubuntu 14.04: 2.0.0

Set the minimum to 1.5.0 and drop support for RHEL 6.

This will let us assume lots of capabilities.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Remove the qmpOnly argument of virQEMUCapsNewForBinaryInternal
and instead always assume it's true.

This effectively sets the minimum QEMU version to 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Because we allow a QEMU_JOB_DESTROY to occur while we're starting
up and we drop the @vm lock prior to qemuMonitorOpen, it's possible
that a domain destroy operation "wins" the race, calls qemuProcessStop
which will free and reinitialize priv->monConfig. Depending on the
exact timing either qemuMonitorOpen will be passed a NULL @config
variable or it will be using free'd (and possibly reclaimed) memory
as the @config parameter - neither of which is good.

Resolve this by localizing the @monConfig, taking an extra reference,
and then once we get the @vm lock again removing our reference since
we are done with it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Let's use object referencing to handle the ChrSourceDef. A subsequent
patch then can allow the monConfig to take an extra reference before
dropping the domain lock to then ensure nothing free's the memory that
needs to be used.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Rather than VIR_ALLOC, use the New function for allocation. We
already use the Free function anyway.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Rather than using VIR_ALLOC, use the New API since we already
use the virDomainChrSourceDefFree function when done.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

The array of strings we are building is indeed array of const
strings. We are not STRDUP()-ing them nor FREE()-ing them.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

We test the same XML for a type='kvm' domain twice, once with
QEMU_CAPS_KVM (expecting success), once without (expecting failure).

The failure case relies on QEMU_CAPS_MACHINE_OPT not being set,
failing in qemuBuildObsoleteAccelArg.

Checking a domain-type error message in a cpu test is strange.
Delete the negative test to allow assuming QEMU_CAPS_MACHINE_OPT by
default.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Use QEMU_CAPS_MACHINE_OPT and QEMU_CAPS_MACHINE_VMPORT_OPT
since it specifies <vmport state=off/>.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Since virCloseCallbacksRun was ignoring the value anyway, let's
just change it to be a void function.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Upon entry from virCloseCallbacksRun, the @dom will have a
Ref and Lock from virDomainObjListFindByUUIDRef, so there's
no need to take an extra reference nor should the code call
virDomainObjEndAPI when done since that both Unref's and
Unlock's the @dom which means the callers call to EndAPI
would be unlocking an unlocked object. At least the Ref
saved the code from referencing something already freed.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>

Now that the old Xen driver is removed, update the drvxen
page with current information on the libxl drvier and remove
all the old cruft.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>