Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Cirrus VGA model is not supported on ppc64 currently.
It needs to set std VGA model as the default model.
Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com>

When parsing the arch from domain XML, the result was only
saved to a local variable, not the virDomainDefPtr
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

We can use VIR_REALLOC_N with NULL pointer, which behaves the same way
as VIR_ALLOC_N in that case, so no need for a condition that's
checking if some data are allocated already.

---

I tried to find other parts of the code similar to this, so I can do a
full cleanup for the whole repository, so I used this (excuse the long
line, but that's how I was writing it):

git grep -nHC 5 -e VIR_REALLOC_N -e VIR_ALLOC_N | while read line; do if [[ "$line" == "--" ]]; then if [[ ${#tmpbuf} -gt 10 && "$REALLOC_N" == "true" && "$ALLOC_N" == "true" ]]; then echo $line; while [[ ${#tmpbuf[*]} -gt 0 ]]; do echo "${tmpbuf[0]}"; tmpbuf=( "${tmpbuf[@]:1:${#tmpbuf[*]}}" ); done; fi; unset tmpbuf REALLOC_N ALLOC_N; else if [[ "$ALLOC_N" != "true" && "${line/VIR_ALLOC_N//}" != "${line}" ]]; then ALLOC_N="true"; fi; if [[ "$REALLOC_N" != "true" && "${line/VIR_REALLOC_N//}" != "${line}" ]]; then REALLOC_N="true"; fi; tmpbuf[${#tmpbuf[*]}]="$line"; fi; done | less

And reviewed the output just to find out this was the only occurrence of
the inconsistency.

On few places there are too many levels of indentation when some of
them can be fixed with negating the option they are in or omitting
useless condition altogether.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.

The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.

    <hostdev mode='capabilities' type='storage'>
      <source>
        <block>/dev/sdf1</block>
      </source>
    </hostdev>

The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.

    <hostdev mode='capabilities' type='misc'>
      <source>
        <char>/dev/input/event3</char>
      </source>
    </hostdev>

The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch simplifies the code that parses the fallback and vendor_id
attributes from the domain xml cpu definition.

Changes done:
- free temp variables in the cleanup section instead of local use
- remove checking for presence of the attribute to directly getting the
value (saving call to virXPathBoolean)
- replace loop used to check for ',' in the vendor_id string with strchr

The field was not freed from the cpu definition.

This patch fixes a problem that vendor_id attribute can not be defined
when fallback attribute is not defined.

If I define domain xml like below:
<domain>
  <cpu>
    <model vendor_id='aaaabbbbcccc'>core2duo</model>
  </cpu>
</domain>

In dumpxml, vendor_id is not reflected:
<domain>
  <cpu mode='custom' match='exact'>
    <model fallback='allow'>core2duo</model>
  </cpu>
</domain>

The expected output is:
<domain>
  <cpu mode='custom' match='exact'>
    <model fallback='allow' vendor_id='aaaabbbbcccc'>core2duo</model>
  </cpu>
</domain>

If the fallback attribute and vendor_id attribute is defined at the same
time, it's reflected as expected.
Signed-off-by: NKen ICHIKAWA <ichikawa.ken@jp.fujitsu.com>

If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.

We always put the primary video device into the first position of
video device structure array after parsing.

Move the code for matching hostdev instances out of virDomainHostdevFind
and into virDomainHostdevMatch method, which in turn calls out to other
helper methods depending on the type of hostdev.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename virDomainHostdevPartsParse to virDomainHostdevDefParseSubsys
to reflect the fact that it only deals with hostdevs uing the
traditional mode=subsystem, and not mode=capabilities

Rename virDomainHostSourceFormat to virDomainHostdevDefFormatSubsys
for the same reason.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Interfaces keeps a class_id, which is an ID from which bridge
part of QoS settings is derived. We need to store class_id
in domain status file, so we can later pass it to
virNetDevBandwidthUnplug.

Currently, we are only keeping a inactive XML configuration
in status dir. This is no longer enough as we need to keep
this class_id attribute so we don't overwrite old entries
when the daemon restarts. However, since there has already
been release which has just <network/> as root element,
and we want to keep things compatible, detect that loaded
status file is older one, and don't scream about it.

Network should be notified if we plug in or unplug an
interface, so it can perform some action, e.g. set/unset
network part of QoS. However, we are doing this in very
early stage, so iface->ifname isn't filled in yet. So
whenever we want to report an error, we must use a different
identifier, e.g. the MAC address.

This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.

From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.

The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface.  This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.

Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.

With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)

Documentation and the network schema has been updated
to reflect the new support.

virNetworkDefUpdateForward requires separate functions to parse and
clear a virNetworkForwardDef by itself, but they were previously just
inlined in the virNetworkDef parse and free functions. This patch
makes them into separate functions.

The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.

This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".

The other clear functions in network_conf.c that clear out arrays of
sub-objects do so by using the n[itemname]s value as a counter going
down to 0. Make this one consistent. There's no functional value, just
makes the style more consistent with the rest of the file.

This makes some function names and arg lists for consistent with other
parse functions in network_conf.c. While modifying
virNetworkIPParseXML(), also change its "error" label to "cleanup",
since the code at that label is executed on success as well as
failure.

These three functions are very similar - none allow a MODIFY
operation; you can only add or delete.

The biggest difference between them (other than the data itself) is in
the criteria for determining a match, and whether or not multiple
matches are possible:

1) for HOST records, it's considered a match if the IP address or any
of the hostnames of an existing record matches.

2) for SRV records, it's a match if all of
domain+service+protocol+target *which have been specified* are
matched.

3) for TXT records, there is only a single field to match - name
(value can be the same for multiple records, and isn't considered a
search term), so by definition there can be no ambiguous matches.

In all three cases, if any matches are found, ADD will fail; if
multiple matches are found, it means the search term was ambiguous,
and a DELETE will fail.

The upper level code in bridge_driver.c is already implemented for
these functions - appropriate conf files will be re-written, and
dnsmasq will be SIGHUPed or restarted as appropriate.

Since there is only a single virNetworkDNSDef for any virNetworkDef,
and it's trivial to determine whether or not it contains any real
data, it's much simpler (and fits more uniformly with the parse
function calling sequence of the parsers for many other objects that
are subordinates of virNetworkDef) if virNetworkDef *contains* an
virNetworkDNSDef rather than pointing to one.

Since it is now just a part of another object rather than its own
object, it no longer makes sense to have a *Free() function, so that
is changed to a *Clear() function.

More importantly though, ParseXML and Clear functions are needed for
the individual items contained in a virNetworkDNSDef (srv, txt, and
host records), but none of them have a *Clear(), and only two of the
three had *ParseXML() functions (both of which used a non-uniform
arglist). Those problems are cleared up by this patch - it splits the
higher-level Clear function into separate functions for each of the
three, creates a parse for txt records, and cleans up the srv and host
parsers, so we now have all the utility functions necessary to
implement virNetworkDefUpdateDNS(Host|Srv|Txt).

This shortens the name of the structs for srv and txt, and their
instances in virNetworkDNSDef, to be more compact and uniform with the
naming of the dns host array. It also changes the type of ntxts, etc
from unsigned int to size_t, so that they can be used directly as args
to VIR_*_ELEMENT.

The already-written backend functions for virNetworkUpdate that add
and delete items into lists within the a network were already debugged
to work properly, but future such functions will use
VIR_(INSERT|DELETE)_ELEMENT instead, so these are changed for
uniformity.

QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=767057

It was possible to define a network with <forward mode='bridge'> that
had both a bridge device and a forward device defined. These two are
mutually exclusive by definition (if you are using a bridge device,
then this is a host bridge, and if you have a forward dev defined,
this is using macvtap). It was also possible to put <ip>, <dns>, and
<domain> elements in this definition, although those aren't supported
by the current driver (although it's conceivable that some other
driver might support that).

The items that are invalid by definition, are now checked in the XML
parser (since they will definitely *always* be wrong), and the others
are checked in networkValidate() in the network driver (since, as
mentioned, it's possible that some other network driver, or even this
one, could some day support setting those).

This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified.  This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).

This patch adds a new attribute "ipv6" at the toplevel of a <network>
object.  If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.

Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:

   net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1

This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.

To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.

Documentation related to this patch has been updated.
The network schema has also been updated.

Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.

This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.

To detect if an interface's nwfilter has changed, we need to also
compare the filterparams, which is a hashtable of virNWFilterVarValue.
virHashEqual can do this nicely, but requires a pointer to a function
that will compare two of the items being stored in the hashes.

This resolves:

   https://bugzilla.redhat.com/show_bug.cgi?id=881480

These three functions:

  virDomainNetGetActualBridgeName
  virDomainNetGetActualDirectDev
  virDomainNetGetActualDirectMode

return attributes that are in a union whose contents are interpreted
differently depending on the actual->type and so they should only
return non-0 when actual->type is 'bridge' (in the first case) or
'direct' (in the other two cases, but I had neglected to do that, so
...DirectDev() was returning bridge.brname (which happens to share the
same spot in the union with direct.linkdev) if actual->type was
'bridge', and ...BridgeName was returning direct.linkdev when
actual->type was 'direct'.

How does this involve Bug 881480 (which was about the inability to
switch between two networks that both have "<forward mode='bridge'/>
<bridge name='xxx'/>"? Whenever the return value of
virDomainNetGetActualDirectDev() for the new and old network
definitions doesn't match, qemuDomainChangeNet() requires a "complete
reconnect" of the device, which qemu currently doesn't
support. ...DirectDev() *should* have been returning NULL for old and
new, but was instead returning the old and new bridge names, which
differ.

(The other two functions weren't causing any behavioral problems in
virDomainChangeNet(), but their problem and fix was identical, so I
included them in this same patch).

Fix the null pointer access when UUID is not specified.
Introduce a bool 'uuidUsable' to virStoragePoolAuthCephx that indicates
if uuid was specified or not and use it instead of the pointless
comparison of the static UUID array to NULL.
Add an error message if both uuid and usage are specified.

Fixes:
Error: FORWARD_NULL (CWE-476):
libvirt-0.10.2/src/conf/storage_conf.c:461: var_deref_model: Passing
    null pointer "uuid" to function "virUUIDParse(char const *, unsigned
    char *)", which dereferences it. (The dereference is assumed on the
    basis of the 'nonnull' parameter attribute.)
Error: NO_EFFECT (CWE-398):
    libvirt-0.10.2/src/conf/storage_conf.c:979: array_null: Comparing an
    array to null is not useful: "src->auth.cephx.secret.uuid != NULL".

If allocation of names fails, list is uninitialized.