- 04 11月, 2017 1 次提交
-
-
由 Dawid Zamirski 提交于
The optional values are 'piix3', 'piix4' or 'ich6'. Those will be needed to allow setting IDE controller model in VirtualBox driver.
-
- 03 11月, 2017 1 次提交
-
-
由 Andrea Bolognani 提交于
Right-aligning backslashes when defining macros or using complex commands in Makefiles looks cute, but as soon as any changes is required to the code you end up with either distractingly broken alignment or unnecessarily big diffs where most of the changes are just pushing all backslashes a few characters to one side. Generated using $ git grep -El '[[:blank:]][[:blank:]]\\$' | \ grep -E '*\.([chx]|am|mk)$$' | \ while read f; do \ sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \ done Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
-
- 23 10月, 2017 2 次提交
-
-
由 Michal Privoznik 提交于
We need to format alias even for inactive XMLs since that's the way how users are going to identify their devices. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
They have to be unique within the domain. As usual, backwards compatibility takes its price. In this particular situation we have a device that is represented twice in a domain and so is its alias. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 22 10月, 2017 1 次提交
-
-
由 Michal Privoznik 提交于
If driver that is calling the parse supports user supplied aliases, they can be parsed even for inactive XMLs. However, to avoid any clashes with aliases that libvirt generates, the user ones have to have "ua-" prefix. Note, that some drivers don't have notion of device aliases at all. Also, in order to support user supplied aliases some extra checks need to be done (e.g. during hotplug). Therefore we can't just enable this feature for all the drivers. Thus we need a flag that drivers set to tell parsing code that they can handle user supplied device aliases. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 20 10月, 2017 2 次提交
-
-
由 John Ferlan 提交于
Since the virStorageEncryptionPtr encryption; is a member of _virStorageSource it really should be allowed to be a subelement of the disk <source> for various disk formats: Source{File|Dir|Block|Volume} SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP} NB: Simple includes sheepdog, ftp, ftps, tftp That way we can set up to allow the <encryption> element to be formatted within the disk source, but we still need to be wary from whence the element was read - see keep track and when it comes to format the data, ensure it's written in the correct place. Modify the qemuxml2argvtest to add a parse failure when there is an <encryption> as a child of <disk> *and* an <encryption> as a child of <source>. The virschematest will read the new test files and validate from a RNG viewpoint things are fine.
-
由 John Ferlan 提交于
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource it really should be allowed to be a subelement of the disk <source> for the RBD and iSCSI prototcols. That way we can set up to allow the <auth> element to be formatted within the disk source. Since we've allowed the <auth> to be a child of <disk>, we'll need to keep track of how it was read so that when writing out we'll know whether to format as child of <disk> or <source>. For the argv2xml parsing, let's format under <source> as a preference. Do not allow <auth> to be both a child of <disk> and <source>. Modify the qemuxml2argvtest to add a parse failure when there is an <auth> as a child of <disk> *and* an <auth> as a child of <source>. Add tests to validate that if the <auth> was found in <source>, then the resulting xml2xml and xml2arg works just fine. The two new .args file are exact copies of the non "-source" version of the file. The virschematest will read the new test files and validate from a RNG viewpoint things are fine Update the virstoragefile, virstoragetest, and args2xml file to show the "preference" to place <auth> as a child of <source>.
-
- 19 10月, 2017 8 次提交
-
-
由 Michal Privoznik 提交于
This function is going to make decisions based on the features set per each driver. For that we need the virDomainXMLOption object. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
It looks like the error message was copied from virsh, because that's where we have @ctl. Nevertheless, it's @flags which is invalid, not @ctl. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
-
由 Pavel Hrdina 提交于
There is one limitation for using this API, when the guest is started with all actions set to "destroy" we put "-no-reboot" on the QEMU command line. That cannot be changed while QEMU is running and the QEMU process is always terminated no matter what is configured for any action. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1460677Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
There is no need to have two different enums where one has the same values as the other one with some additions. Currently for on_poweroff and on_reboot we allow only subset of actions that are allowed for on_crash. This was covered in parse time using two different enums. Now to make sure that we don't allow setting actions that are not supported we need to check it while validating domain config. Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
Reviewed-by: NJohn Ferlan <jferlan@redhat.com> Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 18 10月, 2017 1 次提交
-
-
由 Nikolay Shirokovskiy 提交于
If same boot order is specified twice (or more) in domain xml we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML and SIGABRT (or similar) as a result.
-
- 17 10月, 2017 4 次提交
-
-
由 Peter Krempa 提交于
Express a properly terminated backing chain by putting a virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly used helpers simplify this greatly. The change fixes a bug as formatting an incomplete backing chain and parsing it back would end up in expressing a terminated chain since src->backingStoreRaw was not populated. By relying on the terminator object this can be now processed appropriately.
-
由 Peter Krempa 提交于
Add helpers that will simplify checking if a backing file is valid or whether it has backing store. The helper virStorageSourceIsBacking returns true if the given virStorageSource is a valid backing store member. virStorageSourceHasBacking returns true if the virStorageSource has a backing store child. Adding these functions creates a central points for further refactors.
-
由 Peter Krempa 提交于
The backing store indexes were not bound to the storage sources in any way. To allow us to bind a given alias to a given storage source we need to save the index in virStorageSource. The backing store ids are now generated when detecting the backing chain. Since we don't re-detect the backing chain after snapshots, the numbering needs to be fixed there.
-
由 Peter Krempa 提交于
Use VIR_STEAL_PTR to remove conditional cleanup.
-
- 14 10月, 2017 3 次提交
-
-
由 Michal Privoznik 提交于
Currently, if parsing of device info fails info->alias is freed. It doesn't make much sense to leave the rest of the struct behind. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
There's one 'return' in the middle of the function body. It's very easy to miss and so it makes adding new code harder. Also the function doesn't follow our style 100%. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
Every caller reports the error themselves. Might as well move it into the function and thus unify it. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 05 10月, 2017 2 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1497410 The comment in virNetDevTapInterfaceStats() implementation for Linux states that packets transmitted by domain are received by the host and vice versa. Well, this is true but not for all types of interfaces. For instance, for macvtaps when TAP device is hooked right onto a physical device any packet that domain sends looks also like a packet sent to the host. Therefore, we should allow caller to chose if the stats returned should be straight copy or swapped. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
由 Michal Privoznik 提交于
Small wrapper to lookup interface in domain definition by its name. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
-
- 04 10月, 2017 3 次提交
-
-
由 Lin Ma 提交于
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059). This patch introduces a new attribute "queues". An example of the XML: <disk type='file' device='disk'> <driver name='qemu' type='qcow2' queues='4'/> The corresponding QEMU command line: -device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0 Signed-off-by: NLin Ma <lma@suse.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Michal Privoznik 提交于
When detaching an <interface/> from a domain, the MAC address is parsed and if not present one is generated. If no corresponding interface is found in the domain, the following error is reported: error: operation failed: no device matching mac address 52:54:00:75:32:5b found where the MAC address is the auto generated one. This might be very confusing. Solution to this is to ignore auto generated MAC address when looking up the device. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com> Reviewed-by: NErik Skultety <eskultet@redhat.com>
-
由 Peter Krempa 提交于
virDomainDiskSourceParse got to the point of being an ugly spaghetti mess by adding more and more stuff into it. Split out parsing of network disk information into a separate function so that it stays contained.
-
- 28 9月, 2017 1 次提交
-
-
由 Ashish Mittal 提交于
Add an optional virTristateBool haveTLS to virStorageSource to manage whether a storage source will be using TLS. Sample XML for a VxHS disk: <disk type='network' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'> <host name='192.168.0.1' port='9999'/> </source> <target dev='vda' bus='virtio'/> </disk> Additionally add a tlsFromConfig boolean to control whether the TLS setting was due to domain configuration or qemu.conf global setting in order to decide whether to Format the haveTLS setting for either a live or saved domain configuration file. Update the qemuxml2xmltest in order to add a test to show the proper parsing. Also update the docs to describe the tls attribute. Signed-off-by: NAshish Mittal <Ashish.Mittal@veritas.com> Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
-
- 27 9月, 2017 1 次提交
-
-
由 Pavel Hrdina 提交于
This reverts commit edaf4ebe. This uses "reconnect" as attribute for <source> element, but we already have a <reconnect> element for <source> element for chardev devices. Since this is the same feature for different device it should be presented in XML the same way. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 26 9月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
It is possible (although possibly not very useful) to leave out the service attribute when using <source mode='bind'/> Fix the formatter bug introduced by commit 4a0da345 and format the host when its present (checked for non-NULL inside virBufferEscapeString) instead of basing it on the presence of the service attribute. https://bugzilla.redhat.com/show_bug.cgi?id=1455825
-
- 22 9月, 2017 1 次提交
-
-
由 John Ferlan 提交于
Move the virSecretUsageType into the util.
-
- 21 9月, 2017 2 次提交
-
-
由 Jiri Denemark 提交于
The only real usage of this flag was removed by "cpu_conf: Drop updateCPU from virCPUDefFormat". Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
In the past we updated host-model CPUs with host CPU data by adding a model and features, but keeping the host-model mode. And since the CPU model is not normally formatted for host-model CPU defs, we had to pass the updateCPU flag to the formatting code to be able to properly output updated host-model CPUs. Libvirt doesn't do this anymore, host-model CPUs are turned into custom mode CPUs once updated with host CPU data and thus there's no reason for keeping the hacks inside CPU XML formatters. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 20 9月, 2017 1 次提交
-
-
由 ZhiPeng Lu 提交于
For vhost-user ports, Open vSwitch acts as the server and QEMU the client. When OVS crashed or restart, QEMU shoule be reconnect to OVS. Signed-off-by: NZhiPeng Lu <lu.zhipeng@zte.com.cn> Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 15 9月, 2017 3 次提交
-
-
由 John Ferlan 提交于
Commit id 'e02ff020' neglected to use the attrBuf and childBuf in the virDomainDiskSourceFormatNetwork call. So make the necessary alterations to allow usage.
-
由 John Ferlan 提交于
Rather than checking during XML processing, move the check for valid <encryption> into virDomainDiskDefParseValidate and alter the text of the message slightly to be a bit more correct.
-
由 John Ferlan 提交于
Rather than checking during XML processing, move the checks for correct and valid auth into virDomainDiskDefParseValidate. This will introduce virDomainDiskSourceDefParseAuthValidate to validate that the authdef stored for the virStorageSource is valid. This can then be expanded to service backingStore sources as well. Alter the message text slightly as well to distinguish between an unknown name and an incorrectly used name. Since type is not a mandatory field, add the NULLSTR() around the output of the unknown error. NB, a config using unknown formatting would fail virschematest since it only accepts 'iscsi' and 'ceph' as "valid" types.
-
- 12 9月, 2017 1 次提交
-
-
由 John Ferlan 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1477880 If the "/#" is missing from the provided iSCSI path, then we need to provide the default LUN of /0; otherwise, QEMU will fail to parse the URL causing a failure to either create the guest or hotplug attach the storage. During post parse, for any iSCSI disk or hostdev, scan the source path looking for the presence of '/', if found, then we can assume the LUN is provided. If not found, alter the input XML to add the "/0". This will cause the generated XML to have the generated value when the domain config is saved after post parse.
-
- 11 9月, 2017 1 次提交
-
-
由 Ján Tomko 提交于
This option requires: <ioapic driver='qemu'/> Report an error in case someone tries to combine it with different ioapic setting. Setting 'eim' on without enabling 'intremap' does not make sense. https://bugzilla.redhat.com/show_bug.cgi?id=1457610
-