The global functions virNetDevReplaceMacAddress(),
virNetDevReplaceNetConfig(), virNetDevRestoreMacAddress(), and
virNetDevRestoreNetConfig() are no longer used, as their functionality
has been replaced by virNetDev(Save|Read|Set)NetConfig().

The static functions virNetDevReplaceVfConfig() and
virNetDevRestoreVfConfig() were only used by the above-named global
functions that were removed.

These three functions are destined to replace
virNetDev(Replace|Restore)NetConfig() and
virNetDev(Replace|Restore)MacAddress(), which both do the save and set
together as a single step. We need to separate the save, read, and set
steps because there will be situations where we need to do something
else in between (in particular, we will need to rebind a VF's driver
after save but before set).

This patch creates the new functions, but doesn't call them - that
will come in a subsequent patch. Note that the new functions to
read/write the file that stores the original network config now uses
JSON rather than plaintext (it still recognizes the old format as well
though, so it won't get confused during an upgrade).

Given an SRIOV PF netdev name (e.g. "enp2s0f0") and VF#, this new
function returns the netdev name of the referenced VF device
(e.g. "enp2s11f6"), or NULL if the device isn't bound to a net driver.

The 'ifindex' argument is not a pointer, so no need for NONNULL in prototype

This function provides the bridge/bond device that the given network
device is attached to. The return value is 0 or -1, and the master
device is a char** argument to the function - this is needed in order
to allow for a "success" return from a device that has no master.

Add a function getting the name of a network interface out of its index.

Proposed formal coding conventions encourage defining typedefs for
vir[Blah] and vir[Blah]Ptr separately from the associated struct named
_vir[Blah]:

    typedef struct _virBlah virBlah;
    typedef virBlah *virBlahPtr;
    struct _virBlah {
    ...
    };

At some point in the past, I had submitted several patches using a
more compact style that I prefer, and they were accepted:

    typedef struct _virBlah {
        ...
    } virBlah, *virBlahPtr;

Since these are by far a minority among all struct definitions, this
patch changes all those definitions to reflect the style prefered by
the proposal so that there is 100% consistency.

Commit cf0568b0 moved a bunch of functions from virNetDev
to the more specific virNetDevIP; however, not all of the
existing uses were moved properly, causing build failures on
FreeBSD.

Complete the transition to the new names and drop the
obsolete declarations from the header file while at it.

These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.

This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.

The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")

virNetDevLinkDump should have been in virnetlink.c, but that file
didn't exist yet when the function was created. It didn't really
matter until now - I found that having virnetlink.h included by
virnetdev.h caused build problems when trying to #include virnetdev.h
in a .c file in src/conf (due to missing directory in -I). Rather than
fix that to further institutionalize the incorrect placement of this
one function, this patch moves the function.

SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.

This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.

This is just a wrapper for virCommand that takes two strings
and runs them.

Move it to virnetdev.c for easier mocking.

Signed-off-by: NVasiliy Tolstov <v.tolstov@selfip.ru>

A PCI device may have the capability to setup virtual functions (VFs)
but have them currently all disabled. Prior to this patch, if that was
the case the the node device XML for the device wouldn't report any
virtual_functions capability.

With this patch, if a file called "sriov_totalvfs" is found in the
device's sysfs directory, its contents will be interpreted as a
decimal number, and that value will be reported as "maxCount" in a
capability element of the device's XML, e.g.:

   <capability type='virtual_functions' maxCount='7'/>

This will be reported regardless of whether or not any VFs are
currently enabled for the device.

NB: sriov_numvfs (the number of VFs currently active) is also
available in sysfs, but that value is implied by the number of items
in the list that is inside the capability element, so there is no
reason to explicitly provide it as an attribute.

sriov_totalvfs and sriov_numvfs are available in kernels at least as far
back as the 2.6.32 that is in RHEL6.7, but in the case that they
simply aren't there, libvirt will behave as it did prior to this patch
- no maxCount will be displayed, and the virtual_functions capability
will be absent from the device's XML when 0 VFs are enabled.

Commit id '0f7436ca' added virNetDevWaitDadFinish using ATTRIBUTE_NONNULL
for both arguments, although one is a non-null argument. A Coverity build
balks at that.

commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.

This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.

These functions were made static as a part of commit cbfe38c since
they were no longer called from outside virnetdev.c. We once again
need to call them from another file, so this patch makes them once
again public.

Adding functionality to libvirt that will allow
it query the interface for the availability of RDMA and
tx-udp_tnl-segmentation Offloading NIC capabilities

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <feature name='rdma'/>
    <feature name='txudptnl'/>
    <capability type='80203'/>
  </capability>
</device>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1113474

When we set the MAC address of a network device as a part of setting
up macvtap "passthrough" mode (where the domain has an emulated netdev
connected to a host macvtap device that has exclusive use of the
physical device, and sets the device MAC address to match its own,
i.e. "<interface type='direct'> <source mode='passthrough' .../>"), we
use ioctl(SIOCSIFHWADDR) giving it the name of that device. This is
true even if it is an SRIOV Virtual Function (VF).

But, when we are setting the MAC address / vlan ID of a VF in
preparation for "hostdev network" passthrough (this is where we set
the MAC address and vlan id of the VF after detaching the host net
driver and before assigning the device to the domain with PCI
passthrough, i.e. "<interface type='hostdev'>", we do the setting via
a netlink RTM_SETLINK message for that VF's Physical Function (PF),
telling it the VF# we want to change. This sets an "administratively
changed MAC" flag for that VF in the PF's driver, and from that point
on (until the PF driver is reloaded, *not* merely the VF driver) that
VF's MAC address can't be changed using ioctl(SIOCSIFHWADDR) - the
only way to change it is via the PF with RTM_SETLINK.

This means that if a VF is used for hostdev passthrough, it will have
the admin flag set, and future attempts to use that VF for macvtap
passthrough will fail.

The solution to this problem is to check if the device being used for
macvtap passthrough is actually a VF; if so, we use the netlink
RTM_SETLINK message to the PF to set the VF's mac address instead of
ioctl(SIOCSIFHWADDR) directly to the VF; if not, behavior does not
change from previously.

There are three pieces to making this work:

1) virNetDevMacVLan(Create|Delete)WithVPortProfile() now call
   virNetDev(Replace|Restore)NetConfig() rather than
   virNetDev(Replace|Restore)MacAddress() (simply passing -1 for VF#
   and vlanid).

2) virNetDev(Replace|Restore)NetConfig() check to see if the device is
   a VF. If so, they find the PF's name and VF#, allowing them to call
   virNetDev(Replace|Restore)VfConfig().

3) To prevent mixups when detaching a macvtap passthrough device that
   had been attached while running an older version of libvirt,
   virNetDevRestoreVfConfig() is potentially given the preserved name
   of the VF, and if the proper statefile for a VF can't be found in
   the stateDir (${stateDir}/${pfname}_vf${vfid}),
   virNetDevRestoreMacAddress() is called instead (which will look in
   the file named ${stateDir}/${vfname}).

This problem has existed in every version of libvirt that has both
macvtap passthrough and interface type='hostdev'. Fortunately people
seem to use one or the other though, so it hasn't caused any real
world problem reports.

Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:

1) use virNetDevSysfsFile() wherever possible

2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
   the rest of places which can't go with 1)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is yet another test for check of basic functionality of our
NIC state handling code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Last commit unconditionally included a linux-specific header.

Do not do that.

Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit e562a61a introduced new function to get/set interface state but
there was misuse of ATTRIBUTE_NONNULL on non-pointer attributes and also
we need to wrap that functions by #ifdef to not break mingw build.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

e562a61a added these two new helper functions and only used them
within virnetdev.c, but declared them in the .h file. If some
currently unsupported interface flags need to be accessed in the
future, it will make more sense to write the appropriate higher level
function rather than require us to artificially define IFF_* on some
mythical platform that doesn't have SIOC[SG]IFFLAGS (and therefore
doesn't have IFF_*) just so we can call virNetDevSetIFFFlags() to
return an error.

To help someone in not going down the wrong road, this patch makes the
two helper functions static, hopefully making it less likely that
someone will want to use them outside of virnetdev.c.

This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:

* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Network interfaces devices and host devices with net capabilities can
now have IPv4 and/or an IPv6 routes configured.

Make clear that virNetDevClearIPv4Address can also handle IPv6
addresses by changing the name

Renamed virNetDevSetIPv4Address as it also handles IPv6 addresses.

This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:

* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NLaine Stump <laine@laine.org>

virNetDevLinkDump() gets a message from netlink into "resp", then
calls nlmsg_parse() to fill the table "tb" with pointers into resp. It
then returns tb to its caller, but not before freeing the buffer at
resp. That means that all the callers of virNetDevLinkDump() are
examining memory that has already been freed. This can be verified by
filling the buffer at resp with garbage prior to freeing it (or, I
suppose, just running libvirtd under valgrind) then performing some
operation that calls virNetDevLinkDump().

The code has been like this ever since virNetDevLinkDump() was written
- the original author didn't notice it, and neither did later
additional users of the function. It has only been pure luck (or maybe
a lack of heavy load, and/or maybe an allocation algorithm in malloc()
that delays re-use of just-freed memory) that has kept this from
causing errors, for example when configuring a PCI passthrough or
macvtap passthrough network interface.

The solution taken in this patch is the simplest - just return resp to
the caller along with tb, then have the caller free it after they are
finished using the data (pointers) in tb. I alternately could have
made a cleaner interface by creating a new struct that put tb and resp
together along with a vir*Free() function for it, but this function is
only used in a couple places, and I'm not sure there will be
additional new uses of virNetDevLinkDump(), so the value of adding a
new type, extra APIs, etc. is dubious.

This same structure will be used to retrieve RX filter info for
interfaces on the host via netlink messages, and RX filter info for
interfaces on the guest via the qemu "query-rx-filter" command.

The purpose of this function is to fetch link state
and link speed for given NIC name from the SYSFS.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This is a prerequisite to the fix for the fix to:

  https://bugzilla.redhat.com/show_bug.cgi?id=1025397

num_virtual_functions needs to be size_t in order to use the
VIR_APPEND_ELEMENT macro.

'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up remaining offenders in src/util.

* src/util/virnetdev.h (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Use intended type.
* src/util/virnetdevbandwidth.h (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.h (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.h (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.h (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.h (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.h
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate): Likewise.
* src/util/virnetlink.h (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
* src/util/virnetdev.c (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix fallout.
* src/util/virnetdevbandwidth.c (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.c (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.c (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.c (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate)
(virNetDevVPortProfileOpSetLink, virNetDevVPortProfileOpCommon)
(virNetDevVPortProfileOp8021Qbg, virNetDevVPortProfileOp8021Qbh):
Likewise.
* src/util/virnetlink.c (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit b9c6b073 dropped the version of virNetDevSetupControl
that didn't check for NULL arguments, but we call it like that
in virNetDevBridgeDelete.

This method is useful not only in virnetdev.c.

Commit ccff335f added ATTRIBUTE_NONNULL for an attribute which is not
a pointer and made files including virnetdev.h not compilable, so fix
that.