This fixes a leak described in

   https://bugzilla.redhat.com/show_bug.cgi?id=590073

xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.

This was found by Paolo Bonzini <pbonzini@redhat.com>.

When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment.  The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host.  So the
current logic will reset host devices.

Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.

* src/util/pci.h: change signature of pciResetDevice to add an
  inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
  functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes

Add the library entry point for the new virDomainQemuMonitorCommand()
entry point.  Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.

Changes since v1:
 - Go back to using the virDriver table for qemuDomainMonitorCommand, due to
   linking issues
 - Added versioning information to the libvirt-qemu.so

Changes since v2:
 - None

Changes since v3:
 - Add LGPL header to libvirt-qemu.c
 - Make virLibConnError and virLibDomainError macros instead of function calls

Changes since v4:
 - Move exported symbols to libvirt_qemu.syms
Signed-off-by: NChris Lalancette <clalance@redhat.com>

In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach.  This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands.  Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/esx/esx_driver.c (esxDomainCreate): Move guts...
(esxDomainCreateWithFlags): ...to new function.
(esxDriver): Trivially support the new API.
* src/lxc/lxc_driver.c (lxcDomainStart, lxcDomainStartWithFlags)
(lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDomainStart)
(oneDomainStartWithFlags, oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDomainCreate)
(openvzDomainCreateWithFlags, openvzDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainStart)
(qemudDomainStartWithFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testDomainCreate)
(testDomainCreateWithFlags, testDriver): Likewise.
* src/uml/uml_driver.c (umlDomainStart, umlDomainStartWithFlags)
(umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainCreate)
(vboxDomainCreateWithFlags, Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainCreate)
(xenUnifiedDomainCreateWithFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainCreate)
(xenapiDomainCreateWithFlags, xenapiDriver): Likewise.

Persistent domain creation needs the same features as transient
domains, but virDomainCreate lacks the flags argument present in
virDomainCreateXML.  virDomainCreateFlags is already claimed as
a public enum, so we have to break convention and expose
virDomainCreateWithFlags.

* include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add.
* src/driver.h (virDrvDomainCreateWithFlags): Internal API.
* src/libvirt.c (virDomainCreateWithFlags): Glue public API to
driver API.
* src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

This defines the internal driver API and stubs out each driver

* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver

The defined __sun is there, because inside_daemon is used in xenUnifiedOpen
if __sun is defined.

git grep found 12 of the former but 100 of the latter in src/.

* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.

and domainIsPersistent.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.

* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
  adds the new entry points virDomainManagedSave(),
  virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
  src/opennebula/one_driver.c  src/openvz/openvz_driver.c
  src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/xen/xen_driver.c: add corresponding new internal drivers entry
  points

To allow the new virDomainUpdateDeviceFlags() API to be universally
used with all drivers, this patch adds an impl to all the current
drivers which support CDROM or Floppy disk media change via the
current virDomainAttachDeviceFlags API

* src/qemu/qemu_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/proxy_internal.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c: Implement media change via the
  virDomainUpdateDeviceFlags API
* src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
  src/xen/xen_inotify.c, src/xen/xm_internal.c,
  src/xen/xs_internal.c: Stubs for Xen driver entry points

The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.

* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
  driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
  stubs for new driver entry point

The libvirtd daemon impl will need to switch over to using the
new event APIs. To make this simpler, ensure all drivers currently
providing events support both the new APIs and old APIs.

* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c, src/test/test_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Implement the new
  virConnectDomainEvent(Dereg|Reg)isterAny driver entry points

The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.

 * The signature of virDomainEventDispatchFunc changes to use
   virConnectDomainEventGenericCallback instead of the lifecycle
   event specific virConnectDomainEventCallback
 * Every registered callback gains a unique ID to allow its
   removal based on ID, instead of function pointer
 * Every registered callback gains an 'eventID' to allow callbacks
   for different types of events to be distinguished
 * virDomainEventDispatch is adapted to filter out callbacks
   whose eventID does not match the eventID of the event being
   dispatched
 * virDomainEventDispatch is adapted to filter based on the
   domain name and uuid, if this filter is set for a callback.
 * virDomainEvent type/detail fields are moved into a union to
   allow different data fields for other types of events to be
   added later

* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
  to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/xen/xen_driver.c: Change dispatch function signature
  to use virConnectDomainEventGenericCallback

The current API for domain events has a number of problems

 - Only allows for domain lifecycle change events
 - Does not allow the same callback to be registered multiple times
 - Does not allow filtering of events to a specific domain

This introduces a new more general purpose domain events API

  typedef enum {
     VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0,       /* virConnectDomainEventCallback */
      ...more events later..
  }

  int virConnectDomainEventRegisterAny(virConnectPtr conn,
                                       virDomainPtr dom, /* Optional, to filter */
                                       int eventID,
                                       virConnectDomainEventGenericCallback cb,
                                       void *opaque,
                                       virFreeCallback freecb);

  int virConnectDomainEventDeregisterAny(virConnectPtr conn,
                                         int callbackID);

Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature

eg

  int myDomainEventCallback(virConnectPtr conn,
                            virDomainPtr dom,
                            int event,
                            int detail,
                            void *opaque)
  {
    ...
  }

  virConnectDomainEventRegisterAny(conn, NULL,
                                   VIR_DOMAIN_EVENT_ID_LIFECYCLE,
                                   VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
                                   NULL, NULL);

The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature

* include/libvirt/libvirt.h.in: Define new APIs for registering
  domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
  src/xenapi/xenapi_driver.c: Stub out new API entries

* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done

Prior to this patch, there was an inconsistent mix between GNU and C99.

For consistency, and potential portability to other compilers, stick
with the C99 vararg macro syntax.

* src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/conf/domain_conf.c (virDomainReportError): Likewise.
* src/conf/domain_event.c (eventReportError): Likewise.
* src/conf/interface_conf.c (virInterfaceReportError): Likewise.
* src/conf/network_conf.c (virNetworkReportError): Likewise.
* src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise.
* src/conf/secret_conf.h (virSecretReportError): Likewise.
* src/conf/storage_conf.h (virStorageReportError): Likewise.
* src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than
  GNU vararg macro syntax.
* src/esx/esx_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_interface_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_network_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_secret_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_storage_driver.c (ESX_ERROR): Likewise.
* src/esx/esx_util.c (ESX_ERROR): Likewise.
* src/esx/esx_vi.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise.
* src/esx/esx_vmx.c (ESX_ERROR): Likewise.
* src/util/hostusb.c (usbReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/util/json.c (virJSONError): Likewise.
* src/util/macvtap.c (ReportError): Likewise.
* src/util/pci.c (pciReportError): Likewise.
* src/util/stats_linux.c (virStatsError): Likewise.
* src/util/util.c (virUtilError): Likewise.
* src/util/xml.c (virXMLError): Likewise.
* src/xen/proxy_internal.c (virProxyError): Use C99 rather than
  GNU vararg macro syntax.
* src/xen/sexpr.c (virSexprError): Likewise.
* src/xen/xen_driver.c (xenUnifiedError): Likewise.
* src/xen/xen_hypervisor.c (virXenError): Likewise.
* src/xen/xen_inotify.c (virXenInotifyError): Likewise.
* src/xen/xend_internal.c (virXendError): Likewise.
* src/xen/xm_internal.c (xenXMError): Likewise.
* src/xen/xs_internal.c (virXenStoreError): Likewise.
* src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU
  vararg macro syntax.
* src/datatypes.c (virLibConnError): Likewise.
* src/interface/netcf_driver.c (interfaceReportError): Likewise.
* src/libvirt.c (virLibStreamError): Likewise.
* src/lxc/lxc_conf.h (lxcError): Likewise.
* src/network/bridge_driver.c (networkReportError): Likewise.
* src/nodeinfo.c (nodeReportError): Likewise.
* src/opennebula/one_conf.h (oneError): Likewise.
* src/openvz/openvz_conf.h (openvzError): Likewise.
* src/phyp/phyp_driver.c (PHYP_ERROR): Likewise.
* src/qemu/qemu_conf.h (qemuReportError): Likewise.
* src/remote/remote_driver.c (errorf): Likewise.
* src/security/security_driver.h (virSecurityReportError): Likewise.
* src/test/test_driver.c (testError): Likewise.
* src/uml/uml_conf.h (umlReportError): Likewise.
* src/vbox/vbox_driver.c (vboxError): Likewise.
* src/vbox/vbox_tmpl.c (vboxError): Likewise.

This provides the internal glue for the driver API

* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
  to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub out entry points

The internal glue layer for the new pubic API

* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
  API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Stub new entry point

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

It was used for error reporting only.

Implementation of domain{Attach,Detach}DeviceFlags handlers
in the drivers.

* src/xen/xen_driver.c (xenUnifiedDomainXMLFromNative): Also
free "conf" before returning.

Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition.  Because of static initializers, update
every driver and set the new field to NULL.

* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
  entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
  implemented later

* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
  src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
  src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
  src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
  all drivers

There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.

* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
  VIR_ERR_MIGRATE_PERSIST_FAILED

The xenUnifiedNumOfDomains and xenUnifiedListDomains methods work
together as a pair, so it is critical they both apply the same
logic. With the current mis-matched logic it is possible to sometimes
get into a state when you miss certain active guests.

* src/xen/xen_driver.c: Change xenUnifiedNumOfDomains ordering to
  match xenUnifiedListDomains.

This implements the virConnectIsSecure, virConnectIsEncrypted,
virDomainIsPersistent, virDomainIsActive, virNetworkIsActive,
virNetworkIsPersistent, virStoragePoolIsActive,
virStoragePoolIsPersistent, virInterfaceIsActive APIs in
(nearly) all drivers. Exceptions are:

 phyp: missing domainIsActive/Persistent
 esx: missing domainIsPersistent
 opennebula: missing domainIsActive/Persistent

* src/remote/remote_protocol.x: Define remote wire ABI for newly
  added APIs.
* daemon/remote_dispatch*.h: Re-generated from remote_protocol.x
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_conf.c,
  src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
  src/remote/remote_driver.c, src/storage/storage_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xen/xen_driver.h, src/xen/xen_inotify.c,
  src/xen/xen_inotify.h: Implement all the new APIs where possible

Introduce a number of new APIs to  expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.

 * virDomainIsActive: Checking virDomainGetID is not reliable
   since it is not possible to distinguish between error condition
   and inactive domain for ID of -1.
 * virDomainIsPersistent: Check whether a persistent config exists
   for the domain

 * virNetworkIsActive: Check whether the network is active
 * virNetworkIsPersistent: Check whether a persistent config exists
   for the network

 * virStoragePoolIsActive: Check whether the storage pool is active
 * virStoragePoolIsPersistent: Check whether a persistent config exists
   for the storage pool

 * virInterfaceIsActive: Check whether the host interface is active

 * virConnectIsSecure: whether the communication channel to the
   hypervisor is secure
 * virConnectIsEncrypted: whether any network based commnunication
   channels are encrypted

NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.

 * include/libvirt/libvirt.h.in: Define public API
 * src/driver.h: Define internal driver API
 * src/libvirt.c: Implement public API entry point
 * src/libvirt_public.syms: Export API symbols
 * src/esx/esx_driver.c, src/lxc/lxc_driver.c,
   src/interface/netcf_driver.c, src/network/bridge_driver.c,
   src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
   src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
   src/remote/remote_driver.c, src/test/test_driver.c,
   src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
   src/xen/xen_driver.c: Stub out driver tables

All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.

Changes from v1:
  Drop the driver wrappers around virGetHostname. This means we still need
  to keep the new conn argument to virGetHostname, but I think it's worth
  it.