Our code is not bug free. The refcounting I introduced will
almost certainly not work in some use cases. Provide a script
that will remove all the XATTRs set by libvirt so that it can
start cleanly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are setting label on kernel, initrd, dtb and slic_table files.
But we never restored it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It helps whe trying to match calls with virSecuritySELinuxSetAllLabel
if the order in which devices are set/restored is the same in
both functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When iterating over list of paths/disk sources to relabel it may
happen that the process fails at some point. In that case, for
the sake of keeping seclabel refcount (stored in XATTRs) in sync
with reality we have to perform rollback. However, if that fails
too the only thing we can do is warn user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's important to keep XATTRs untouched (well, in the same state
they were in when entering the function). Otherwise our
refcounting would be messed up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Similarly to what I did in DAC driver, this also requires the
same SELinux label to be used for shared paths. If a path is
already in use by a domain (or domains) then and the domain we
are starting now wants to access the path it has to have the same
SELinux label. This might look too restrictive as the new label
can still guarantee access to already running domains but in
reality it is very unlikely and usually an admin mistake.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It is going to be important to know if the current transaction we
are running is a restore operation or set label operation so that
we know whether to call virSecurityGetRememberedLabel() or
virSecuritySetRememberedLabel(). That is, whether we are in a
restore and therefore have to fetch the remembered label, or we
are in set operation and therefore have to store the original
label.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that we have seclabel remembering we can safely restore
labels for shared and RO disks. In fact we need to do that to
keep seclabel refcount stored in XATTRs in sync with reality.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This also requires the same DAC label to be used for shared
paths. If a path is already in use by a domain (or domains) then
and the domain we are starting now wants to access the path it
has to have the same DAC label. This might look too restrictive
as the new label can still guarantee access to already running
domains but in reality it is very unlikely and usually an admin
mistake.

This requirement also simplifies seclabel remembering, because we
can store only one seclabel and have a refcounter for how many
times the path is in use. If we were to allow different labels
and store them in some sort of array the algorithm to match
labels to domains would be needlessly complicated.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Because the implementation that will be used for label
remembering/recall is not atomic we have to give callers a chance
to enable or disable it. That is, enable it if and only if
metadata locking is enabled. Otherwise the feature MUST be turned
off.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are setting label on kernel, initrd, dtb and slic_table files.
But we never restored it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It helps whe trying to match calls with virSecurityDACSetAllLabel
if the order in which devices are set/restored is the same in
both functions.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When iterating over list of paths/disk sources to relabel it may
happen that the process fails at some point. In that case, for
the sake of keeping seclabel refcount (stored in XATTRs) in sync
with reality we have to perform rollback. However, if that fails
too the only thing we can do is warn user.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It's important to keep XATTRs untouched (well, in the same state
they were in when entering the function). Otherwise our
refcounting would be messed up.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This file implements wrappers over XATTR getter/setter. It
ensures the proper XATTR namespace is used.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

For consistency, handle the @data "char **" (or remote_string)
assignments and processing similarly between various APIs
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Using a combination of VIR_ALLOC and VIR_STRDUP into a local
variable and then jumping to error on the VIR_STRDUP before
assiging it into the @data would cause a memory leak. Let's
just avoid that by assiging directly into @data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Add guards to avoid calling strchr when @err_noinfo == NULL or
calling virErrorTestMsgFormatInfoOne when @err_info == NULL as
both would fail with a NULL deref.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

The virtualization driver has two connections to the virtlogd daemon,
one pipe fd for writing to the log file, and one socket fd for making
RPC calls. The typical sequence is to write some data to the pipe fd and
then make an RPC call to determine the current log file offset.

Unfortunately these two operations are not guaranteed to be handling in
order by virtlogd. The event loop for virtlogd may identify an incoming
event on both the pipe fd and socket fd in the same iteration of the
event loop. It is then entirely possible that it will process the socket
fd RPC call before reading the pending log data from the pipe fd.

As a result the virtualization driver will get an outdated log file
offset reported back.

This can be seen with the QEMU driver where, when a guest fails to
start, it will randomly include too much data in the error message it
has fetched from the log file.

The solution is to ensure we have drained all pending data from the pipe
fd before reporting the log file offset. The pipe fd is always in
blocking mode, so cares needs to be taken to avoid blocking. When
draining this is taken care of by using poll(). The extra complication
is that they might already be an event loop dispatch pending on the pipe
fd. If we have just drained the pipe this pending event will be invalid
so must be discarded.

See also https://bugzilla.redhat.com/show_bug.cgi?id=1356108Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

If an editor has an XML file open, it may create a temporary . file. The
existance of this file will cause the virschematest to fail, so just
skip these editor temp files.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

/domain/memtune/hard_limit provides a way to cap the memory a VM process
can use, including the amount of memory the process can lock. When memory
locking of a VM is requested, <hard_limit> can be used to prevent the
potential host DoS issue mentioned in /domain/memoryBacking/locked
description.

This patch improves the <hard_limit> text by clarifying it can be used
to prevent "host crashing" when VM memory is locked.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>

The arguments to the N_() macro must only ever be a literal string. It
is not possible to use macro arguments, or use macro string
concatenation in this context. The N_() macro is a no-op whose only
purpose is to act as a marker for xgettext when it extracts translatable
strings from the source code. Anything other than a literal string will
be silently ignored by xgettext.

Unfortunately this means that the clever MSG, MSG2 & MSG_EXISTS macros
used for building up error message strings have prevented any of the
error messages getting marked for translation. We must sadly, revert to
a more explicit listing of strings for now.
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The autostart under session daemon might not behave as you'd
expect it to behave. This patch is inspired by latest
libvirt-users discussion:

https://www.redhat.com/archives/libvirt-users/2018-December/msg00047.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

QEMU commit v3.1.0-4-g0e89165829
KVM patch: https://lore.kernel.org/lkml/20181205191956.31480-1-ehabkost@redhat.com/Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.

An example log file entry now looks like this:

  2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
  LC_ALL=C \
  PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
  HOME=/home/berrange \
  USER=berrange \
  LOGNAME=berrange \
  QEMU_AUDIO_DRV=none \
  /usr/bin/qemu-system-ppc64 \
  -name guest=guest,debug-threads=on \
  -S \
  -object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
  -machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
  -m 1024 \
  -realtime mlock=off \
  -smp 1,sockets=1,cores=1,threads=1 \
  -uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
  -display none \
  -no-user-config \
  -nodefaults \
  -chardev socket,id=charmonitor,fd=23,server,nowait \
  -mon chardev=charmonitor,id=monitor,mode=control \
  -rtc base=utc \
  -no-shutdown \
  -boot strict=on \
  -device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
  -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
  -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
  -msg timestamp=on
  2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The virCommand APIs do not expect to be given a NULL value for an arg
name or value. Such a mistake can lead to execution of the wrong
command, as the NULL may prematurely terminate the list of args.
Detect this and report suitable error messages.

This identified a flaw in the storage test which was passing a NULL
instead of the volume path. This flaw was then validated by an incorrect
set of qemu-img args as expected data.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

There is a limit on the number of lines in the /proc/<pid>/{g,u}id_map
files. In Linux 4.14 and earlier, this limit was (arbitrarily) set at
5 lines. Since Linux 4.15, which was released on 28 Jan 2018, the limit
is 340 lines.

This change is documented in user_namespaces(7).

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6397fac4915ab3002dc15aae751455da1a852f25Signed-off-by: NRadostin Stoyanov <rstoyanov1@gmail.com>

A missing $(AM_V_GEN) meant the raw command was printed by
mistake.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

We must do a substring match, not an exact match since
there can be an arbitrary virtual path prepended.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Simplify adding of new errors by just adding them to the array of
messages rather than having to add conversion code.

Additionally most of the messages add the format string part as a suffix
so we can avoid some of the duplication by using a macro which adds the
suffix to the original string. This way most messages fit into the 80
column limit and only 3 exceed 100 colums.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Erik Skultety <eskultet@redhat.com>

Clarify how @info is used and what the returned values look like.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Make sure that we don't add any broken error message strings any more.

This ensures that both the version with and without additional info is
populated, the version without info does not have any formatting
modifiers and the version with info has exactly one.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Simplify wording of the error string for VIR_ERR_OPEN_FAILED and
VIR_ERR_CALL_FAILED. The error codes itself are currently unused so it
will not impact any client.

This will simplify upcomming patch which refactors how we convert these.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Few error codes were missing the version of the message with additional
info. In case of the modified messages it's not very likely they'll ever
report any additional data, but for the sake of consistency we should
provide them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>