- 27 5月, 2011 2 次提交
-
-
由 Matthias Bolte 提交于
Before commit 145d6cb0 (in August 2010) absolute file names in VMX and domain XML configs were handled correctly. But this got lost during the refactoring. The test cases didn't highlight this problem because they have their own set of file name handling functions. The actual ones require a real connection to an ESX server. Also the test case functions always worked correctly. Fix the regression and add a new in-the-wild VMX file that contains such a problematic absolute path. Even though this test case won't protect against new regressions. Reported by lofic (IRC nick)
-
由 Matthias Bolte 提交于
This testcase passes before the regression is added in f0443765, fails after that commit and passes again after the regression was fixed.
-
- 26 5月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 24 5月, 2011 4 次提交
-
-
由 Laine Stump 提交于
NB: the enum that uses the string vnet-host (now changed to vhost-net) is used in XML, but fortunately that hasn't been in an official release yet, so it can still be fixed.
-
由 Daniel P. Berrange 提交于
Since -vnc uses ':' to separate the address from the port, raw IPv6 addresses need to be escaped like [addr]:port * src/qemu/qemu_command.c: Escape raw IPv6 addresses with [] * tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args, tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak to test Ipv6 escaping * docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames in <graphics> listen attributes
-
由 Alon Levy 提交于
This adds a streaming-video=filter|all|off attribute. It is used to change the behavior of video stream detection in spice, the default is filter (the default for libvirt is not to specify it - the actual default is defined in libspice-server.so). Usage: <graphics type='spice' autoport='yes'> <streaming mode='off'/> </graphics> Tested with the above and with tests/qemuxml2argvtest. Signed-off-by: NAlon Levy <alevy@redhat.com>
-
由 Stefan Berger 提交于
This patch enables filtering of gratuitous ARP packets using the following XML: <rule action='accept' direction='in' priority='425'> <arp gratuitous='true'/> </rule>
-
- 17 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* src/remote/rpcgen_fix.pl: Add executable bit. * tests/oomtrace.pl: Likewise.
-
- 14 5月, 2011 1 次提交
-
-
由 Wen Congyang 提交于
Steps to reproduce this problem: 1. # ./autogen.sh --without-libvirtd 2. # make dist 3. # rpmbuild --nodeps --define "_sourcedir `pwd`" -ba libvirt.spec ... make check-TESTS make[1]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests' make[1]: *** No rule to make target `test_conf.sh', needed by `check-TESTS'. Stop. make[1]: Leaving directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.1/tests' make: *** [check-am] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.7Rb9PV (%check)
-
- 11 5月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Running ./autobuild.sh failed when gcov is installed, because commandtest ended up crashing during gcov's getenv() call after exit() had already started. I traced this nasty bug back to a scoping issue present since the test introduction. * tests/commandtest.c (mymain): Move newenv... (newenv): ...to a scope that is still useful during exit().
-
由 Paolo Bonzini 提交于
Recent versions of Xen disable the virtual HPET by default. This is usually more precise because tick policies are not implemented for the HPET in Xen. However, there may be several reasons to control the HPET manually: 1) to test the emulation; 2) because distros may provide the knob while leaving the default to "enabled" for compatibility reasons. This patch provides support for the hpet item in both sexpr and xm formats, and translates it to a <timer> element. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 06 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have virAsprintf, so picking a similar name helps for seeing a similar purpose. Furthermore, the prefix V before printf generally implies 'va_list', even though this variant was '...', and the old name got in the way of adding a new va_list version. global rename performed with: $ git grep -l virBufferVSprintf \ | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g' then revert the changes in ChangeLog-old.
-
- 04 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Unlikely to hit in real life, but clang noticed it. * tests/commandtest.c (checkoutput, test4, test18): Avoid unlink(NULL) on OOM.
-
- 03 5月, 2011 2 次提交
-
-
由 Eric Blake 提交于
* tests/.valgrind.supp: Consolidate bash suppressions. Ignore more libnl issues.
-
由 Eric Blake 提交于
../../tests/xmconfigtest.c: In function 'testCompareParseXML': ../../tests/xmconfigtest.c:49:19: error: 'conn' may be used uninitialized in this function [-Wuninitialized] * tests/xmconfigtest.c (testCompareParseXML): Initialize variable.
-
- 01 5月, 2011 2 次提交
-
-
由 Matthias Bolte 提交于
Make virtTestLoadFile allocate the buffer to read the file into. Fix logic error in virtTestLoadFile, stop reading on the first empty line. Use virFileReadLimFD in virtTestCaptureProgramOutput to avoid manual buffer handling.
-
由 Matthias Bolte 提交于
-
- 30 4月, 2011 3 次提交
-
-
由 Eric Blake 提交于
Commit 1671d1dc introduced a memory leak in virHashFree, and wholesale table corruption in virHashRemoveSet (elements not requested to be freed are lost). * src/util/hash.c (virHashFree): Free bucket array. (virHashRemoveSet): Don't lose elements. * tests/hashtest.c (testHashCheckForEachCount): New method. (testHashCheckCount): Expose the bug.
-
由 Eric Blake 提交于
* bootstrap.conf (gnulib_modules): Add getcwd-lgpl. * tests/commandtest.c (checkoutput): Drop unused cwd. * tests/commandhelper.c (main): Let getcwd malloc. * tests/testutils.c (virTestMain): Likewise. * tools/virsh.c (cmdPwd): Likewise. (virshCmds): Expose cmdPwd and cmdCd on mingw.
-
由 Eric Blake 提交于
A few of the tests were missing basic sanity checks, while most of them were doing copy-and-paste initialization (in fact, some of them pasted the argc > 1 check more than once!). It's much nicer to do things in one common place, and minimizes the size of the next patch that fixes getcwd usage. * tests/testutils.h (EXIT_AM_HARDFAIL): New define. (progname, abs_srcdir): Define for all tests. (VIRT_TEST_MAIN): Change callback signature. * tests/testutils.c (virtTestMain): Do more common init. * tests/commandtest.c (mymain): Simplify. * tests/cputest.c (mymain): Likewise. * tests/esxutilstest.c (mymain): Likewise. * tests/eventtest.c (mymain): Likewise. * tests/hashtest.c (mymain): Likewise. * tests/networkxml2xmltest.c (mymain): Likewise. * tests/nodedevxml2xmltest.c (myname): Likewise. * tests/nodeinfotest.c (mymain): Likewise. * tests/nwfilterxml2xmltest.c (mymain): Likewise. * tests/qemuargv2xmltest.c (mymain): Likewise. * tests/qemuhelptest.c (mymain): Likewise. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2xmltest.c (mymain): Likewise. * tests/qparamtest.c (mymain): Likewise. * tests/sexpr2xmltest.c (mymain): Likewise. * tests/sockettest.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * tests/storagepoolxml2xmltest.c (mymain): Likewise. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/virbuftest.c (mymain): Likewise. * tests/virshtest.c (mymain): Likewise. * tests/vmx2xmltest.c (mymain): Likewise. * tests/xencapstest.c (mymain): Likewise. * tests/xmconfigtest.c (mymain): Likewise. * tests/xml2sexprtest.c (mymain): Likewise. * tests/xml2vmxtest.c (mymain): Likewise.
-
- 28 4月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Same fix as commit 1fc288e1. * tests/hashtest.c (testHashRemoveForEach): Use correct format.
-
- 27 4月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
This adds several tests for remaining hash APIs (custom hasher/comparator functions are not covered yet, though). All tests pass both before and after the "Simplify hash implementation".
-
- 21 4月, 2011 1 次提交
-
-
由 Eric Blake 提交于
ARRAY_CARDINALITY is typed as size_t, not long; this matters on 32-bit platforms: hashtest.c: In function 'testHashRemoveForEach': hashtest.c:114: error: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [-Wformat] * tests/hashtest.c (testHashRemoveForEach): Use correct format.
-
- 16 4月, 2011 2 次提交
-
-
由 Jiri Denemark 提交于
This is a basic set of tests for testing removals of hash entries during iteration.
-
由 Eric Blake 提交于
* tests/virsh-optparse: New file. * tests/Makefile.am (test_scripts): Use it.
-
- 15 4月, 2011 2 次提交
-
-
由 Michal Novotny 提交于
Make: passed Make check: passed Make syntax-check: passed this is the commit to introduce the function to create new character device definition for the domain as advised by Cole Robinson <crobinso@redhat.com>. The function is used on the relevant places and also new tests has been added. Signed-off-by: NMichal Novotny <minovotn@redhat.com>
-
由 Michal Privoznik 提交于
This extends the SPICE XML to allow variable compression settings for audio, images and streaming: <graphics type='spice' port='5901' tlsPort='-1' autoport='yes'> <image compression='auto_glz'/> <jpeg compression='auto'/> <zlib compression='auto'/> <playback compression='on'/> </graphics> All new elements are optional.
-
- 08 4月, 2011 1 次提交
-
-
由 Stefan Berger 提交于
This patch adds support for the evaluation of TCP flags in nwfilters. It adds documentation to the web page and extends the tests as well. Also, the nwfilter schema is extended. The following are some example for rules using the tcp flags: <rule action='accept' direction='in'> <tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/> </rule> <rule action='drop' direction='in'> <tcp state='NONE' flags='SYN/ALL'/> </rule>
-
- 07 4月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Reflect reserved VGA port change.
-
- 05 4月, 2011 4 次提交
-
-
由 Daniel P. Berrange 提交于
A couple of functions were declared using the old style foo() for no-parameters, instead of foo(void) * src/xen/xen_hypervisor.c, tests/testutils.c: Replace () with (void) in some function declarations * m4/virt-compile-warnings.m4: Enable -Wold-style-definition
-
由 Daniel P. Berrange 提交于
* src/internal.h: Define a ATTRIBUTE_NO_RETURN annotation * src/lxc/lxc_container.c: Annotate lxcContainerDummyChild with ATTRIBUTE_NO_RETURN * tests/eventtest.c: Mark async thread as ATTRIBUTE_NO_RETURN * m4/virt-compile-warnings.m4: Enable -Wmissing-noreturn
-
由 Daniel P. Berrange 提交于
Add a couple of missing ATTRIBUTE_FMT_PRINTF annotations * tools/virsh.c, tests/testutils.c: Add printf format attribute * m4/virt-compile-warnings.m4: Enable -Wmissing-format-attribute
-
由 Matthias Bolte 提交于
-
- 29 3月, 2011 2 次提交
-
-
由 Osier Yang 提交于
v1 - v2: * Add missed tests/qemuxml2argvdata/qemuxml2argv-cputune.args
-
由 Eric Blake 提交于
Latent bug introduced in commit 2d6a5819 (Aug 2009), but not exposed until commit 1859939a (Jan 2011). Basically, when virExec creates a pipe, it always marks libvirt's side as cloexec. If libvirt then wants to hand that pipe to another child process, things work great if the fd is dup2()'d onto stdin or stdout (as with stdin: or exec: migration), but if the pipe is instead used as-is (such as with fd: migration) then qemu sees EBADF because the fd was closed at exec(). This is a minimal fix for the problem at hand; it is slightly racy, but no more racy than the rest of libvirt fd handling, including the case of uncompressed save images. A more invasive fix, but ultimately safer at avoiding leaking unintended fds, would be to _always and atomically_ open all fds as cloexec in libvirt (thanks to primitives like open(O_CLOEXEC), pipe2(), accept4(), ...), then teach virExec to clear that bit for all fds explicitly marked to be handed to the child only after forking. * src/qemu/qemu_command.c (qemuBuildCommandLine): Clear cloexec flag. * tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Tweak test.
-
- 28 3月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Diego reported a bug where virsh tries to initialize a readline history directory during 'make check' run as root, but fails because /root was read-only. It turns out that I could reproduce this as non-root, by using: mv ~/.virsh{,.bak} chmod a-w ~ make check -C tests TESTS=int-overflow chmod u+w ~ mv ~/.virsh{.bak,} * tests/int-overflow: Don't trigger interactive mode. Reported by Diego Elio Pettenò.
-
- 25 3月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Sometimes, an asynchronous helper is started (such as a compressor or iohelper program), but a later error means that we want to abort that child. Make this easier. Note that since daemons and virCommandRunAsync can't mix, the only time virCommandFree can reap a process is if someone did virCommandRunAsync for a non-daemon and didn't stash the pid. * src/util/command.h (virCommandAbort): New prototype. * src/util/command.c (_virCommand): Add new field. (virCommandRunAsync, virCommandWait): Track whether pid was used. (virCommandFree): Reap child if caller did not request pid. (virCommandAbort): New function. * src/libvirt_private.syms (command.h): Export it. * tests/commandtest.c (test19): New test.
-
- 07 3月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The event loop implementation is used by more than just the daemon, so move it into the shared area. * daemon/event.c, src/util/event_poll.c: Renamed * daemon/event.h, src/util/event_poll.h: Renamed * tools/Makefile.am, tools/console.c, tools/virsh.c: Update to use new virEventPoll APIs * daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update to use new virEventPoll APIs
-
- 06 3月, 2011 1 次提交
-
-
由 Osier Yang 提交于
For qemu names the primary vga as "qxl-vga": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE,... 2) if vram is not specified for 2nd qxl device, (use the default set by global): -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... For qemu names all qxl devices as "qxl": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE ... 2) if vram is not specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... "-global" is the only way to define vram_size for the primary qxl device, regardless of how qemu names it, (It's not good a good way, as original idea of "-global" is to set a global default for a driver property, but to specify vram for first qxl device, we have to use it). For other qxl devices, as they are represented by "-device", could specify it directly and seperately for each, and it overrides the default set by "-global" if specified. v1 - v2: * modify "virDomainVideoDefaultRAM" so that it returns 16M as the default vram_size for qxl device. * vram_size * 1024 (qemu accepts bytes for vram_size). * apply default vram_size for qxl device for which vram_size is not specified. * modify "graphics-spice" tests (more sensiable vram_size) * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr, to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr). v2 - v3: * Modify default video memory size for qxl device from 16M to 24M * Update codes to be consistent with changes on qemu_capabilities.*
-
- 03 3月, 2011 1 次提交
-
-
由 Eric Blake 提交于
* tests/xml2sexprdata/*.sexpr: Add backslash-newlines. * tests/sexpr2xmldata/*.sexpr: Likewise. * tests/qemuxml2argvdata/qemuxml2argv-disk-aio.args: Likewise.
-