- 05 8月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
This configuration knob lets user to set the length of queue of connection requests waiting to be accept()-ed by the daemon. IOW, it just controls the @backlog passed to listen: int listen(int sockfd, int backlog);
-
- 24 6月, 2013 2 次提交
-
-
由 Daniel P. Berrange 提交于
Add an access control driver that uses the pkcheck command to check authorization requests. This is fairly inefficient, particularly for cases where an API returns a list of objects and needs to check permission for each object. It would be desirable to use the polkit API but this links to glib with abort-on-OOM behaviour, so can't be used. The other alternative is to speak to dbus directly Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add a new 'access_drivers' config parameter to the libvirtd.conf configuration file. This allows admins to setup the default access control drivers to use for API authorization. The same driver is to be used by all internal drivers & APIs Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 12 10月, 2012 1 次提交
-
-
由 Ján Tomko 提交于
-
- 18 8月, 2012 1 次提交
-
-
由 Jiri Denemark 提交于
Also make sure documentation in libvirtd.conf matches the one from logging.html.
-
- 28 5月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Instead of doing # example_config use #example_config so it is possible to programatically uncomment example config options, as distinct from their comment/descriptions Also delete rogue trailing comma not allowed by lens Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 27 3月, 2012 1 次提交
-
-
由 Stef Walter 提交于
* Don't advertise information on the network without consent of the user, either through manual configuration, or a user interface that drives this option. * Since libvirtd must be configured for network access anyway (for all but ssh), this setting was not useful "out of the box", so changing this default setting does not remove "out of the box" functionality.
-
- 02 12月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Many of these were mentioned by Yuri Chornoivan in: https://bugzilla.redhat.com/show_bug.cgi?id=669506 * src/esx/esx_vi.c (esxVI_WaitForTaskCompletion): Fix spelling. * src/conf/netdev_vport_profile_conf.c (virNetDevVPortProfileParse): Likewise. * src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags): Likewise. * src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): Likewise. * src/esx/esx_util.c (esxUtil_ResolveHostname): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendFileSystemBuild): Likewise. * daemon/libvirtd.conf: Likewise. * src/util/logging.c (virLogMessage): Likewise. * src/uml/uml_conf.c (umlBuildCommandLineNet): Likewise. * src/vmx/vmx.c (virVMXFormatEthernet): Likewise.
-
- 24 11月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 06 9月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
This patch annotates APIs with low or high priority. In low set MUST be all APIs which might eventually access monitor (and thus block indefinitely). Other APIs may be marked as high priority. However, some must be (e.g. domainDestroy). For high priority calls (HPC), there are some high priority workers (HPW) created in the pool. HPW can execute only HPC, although normal worker can process any call regardless priority. Therefore, only those APIs which are guaranteed to end in reasonable small amount of time can be marked as HPC. The size of this HPC pool is static, because HPC are expected to end quickly, therefore jobs assigned to this pool will be served quickly. It can be configured in libvirtd.conf via prio_workers variable. Default is set to 5. To mark API with low or high priority, append priority:{low|high} to it's comment in src/remote/remote_protocol.x. This is similar to autogen|skipgen. If not marked, the generator assumes low as default.
-
- 22 7月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
When libvirtd starts it it will sanity check its own certs, and before libvirt clients connect to a remote server they will sanity check their own certs. This patch allows such sanity checking to be skipped. There is no strong reason to need to do this, other than to bypass possible libvirt bugs in sanity checking, or for testing purposes. libvirt.conf gains tls_no_sanity_certificate parameter to go along with tls_no_verify_certificate. The remote driver client URIs gain a no_sanity URI parameter * daemon/test_libvirtd.aug, daemon/libvirtd.conf, daemon/libvirtd.c, daemon/libvirtd.aug: Add parameter to allow cert sanity checks to be skipped * src/remote/remote_driver.c: Add no_sanity parameter to skip cert checks * src/rpc/virnettlscontext.c, src/rpc/virnettlscontext.h: Add new parameter for skipping sanity checks independantly of skipping session cert validation checks
-
- 15 3月, 2011 1 次提交
-
-
由 Daniel Veillard 提交于
This is the part allowing to dynamically resize the debug log buffer from it's default 64kB size. The buffer is now dynamically allocated. It adds a new API virLogSetBufferSize() which resizes the buffer If passed a zero size, the buffer is deallocated and we do the small optimization of not formatting messages which are not output anymore. On the daemon side, it just adds a new option log_buffer_size to libvirtd.conf and call virLogSetBufferSize() if needed * src/util/logging.h src/util/logging.c src/libvirt_private.syms: make buffer dynamic and add virLogSetBufferSize() internal API * daemon/libvirtd.conf: document the new log_buffer_size option * daemon/libvirtd.c: read and use the new log_buffer_size option
-
- 20 10月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Integrate with libaudit.so for auditing of important operations. libvirtd gains a couple of config entries for auditing. By default it will enable auditing, if its enabled on the host. It can be configured to force exit if auditing is disabled on the host. It will can also send audit messages via libvirt internal logging API Places requiring audit reporting can use the VIR_AUDIT macro to report data. This is a no-op unless auditing is enabled * autobuild.sh, mingw32-libvirt.spec.in: Disable audit on mingw * configure.ac: Add check for libaudit * daemon/libvirtd.aug, daemon/libvirtd.conf, daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config options to enable auditing * include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_AUDIT source * libvirt.spec.in: Enable audit * src/util/virtaudit.h, src/util/virtaudit.c: Simple internal API for auditing messages
-
- 26 5月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
Allow for a host UUID in the capabilities XML. Local drivers will initialize this from the SMBIOS data. If a sanity check shows SMBIOS uuid is invalid, allow an override from the libvirtd.conf configuration file * daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid configuration option * docs/schemas/capability.rng: Add optional host uuid field * src/conf/capabilities.c, src/conf/capabilities.h: Include host UUID in XML * src/libvirt_private.syms: Export new uuid.h functions * src/lxc/lxc_conf.c, src/qemu/qemu_driver.c, src/uml/uml_conf.c: Set host UUID in capabilities * src/util/uuid.c, src/util/uuid.h: Support for host UUIDs * src/node_device/node_device_udev.c: Use the host UUID functions * tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add new host_uuid config option to test
-
- 21 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* qemud/: Rename to daemon/ * Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c, tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed
-
- 01 7月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c src/logging.[ch]: cleanup the logging code and docs to remove all references to log level 0, cleanup hardcoded values and add a default VIR_LOG_DEFAULT value, patch by Amy Griffis daniel
-
- 10 2月, 2009 1 次提交
-
-
由 Jim Meyering 提交于
Before this change, the unix socket directory was hard-coded to be e.g., /var/run/libvirt for euid==0 and ~/.libvirt otherwise. With this change, you may now specify that directory in libvirtd's config file via a line like this: unix_sock_dir = "/var/run/libvirt". This is essential for running tests that do not impinge on any existing libvirtd process, and in running tests in parallel. * qemud/libvirtd.conf (unix_sock_dir): Add comment and example. * qemud/qemud.h (struct qemud_server) [logDir]: Change type from char[PATH_MAX] to char*. * qemud/qemud.c (unix_sock_dir): New global (remoteReadConfigFile): Set the global. (qemudInitPaths): Use the global, unix_sock_dir, if non-NULL. One minor improvement: unlink both sockets or none, never just one of them. (qemudCleanup): Free logDir. (main): Use the new global rather than hard-coding "/run/libvirt". * qemud/libvirtd.aug (sock_acl_entry): Add "unix_sock_dir".
-
- 21 1月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 22 12月, 2008 1 次提交
-
-
由 Daniel Veillard 提交于
* qemud/libvirtd.aug qemud/libvirtd.conf: document the new options in the config file and augment the Augeas description daniel
-
- 05 12月, 2008 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 01 12月, 2008 1 次提交
-
-
由 Jim Meyering 提交于
This test would hang when failing to perturb the soon-to-be- added numeric (and non-boolean) valued parameters, max_clients, max_workers, min_workers. * tests/daemon-conf: Require that all commented-out settings in libvirtd.conf have the same form. Before, two parameters were not being tested, since a space had snuck between the leading "#" and the "param = value" parts. Apply each RHS-value-perturbing transformation separately, not in series. Let VERBOSE=yes turn on debugging. Be more verbose by default, since this is a relatively long-running test. * qemud/libvirtd.conf: Normalize the spacing around each setting that is to be perturbed by tests/daemon-conf.
-
- 15 5月, 2008 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 29 2月, 2008 1 次提交
-
-
由 Richard W.M. Jones 提交于
-
- 06 12月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 05 12月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 13 10月, 2007 1 次提交
-
-
由 Daniel P. Berrange 提交于
-