- 09 10月, 2009 4 次提交
-
-
由 Daniel P. Berrange 提交于
Simplify the doTunnelMigrate() method by pulling out the code which opens/closes the virConnectPtr object into a parent method * qemu/qemu_driver.c: Add doPeer2PeerMigrate which then calls doTunnelMigrate with dconn & dom_xml
-
由 Daniel P. Berrange 提交于
virStreamAbort is needed when the caller wishes to terminate the stream early, not when virStreamSend fails. * qemu/qemu_driver.c: Fix calling of virStreamAbort during tunnelled migration
-
由 Daniel P. Berrange 提交于
The code for tunnelled migration was added in a dedicated method, but the native migration code is still inline in the top level qemudDomainMigratePerform() API. Move the native code out into a dedicated method too to make things more maintainable. * src/qemu/qemu_driver.c: Pull code for performing a native QEMU migration out into separate method
-
由 Daniel P. Berrange 提交于
Since virMigratePrepareTunnel() is used for migration over the native libvirt connection, there is never any need to pass the target URI to this method. * daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/remote/remote_protocol.c, src/remote/remote_protocol.h, src/remote/remote_protocol.x: Remove 'uri_in' parameter from virMigratePrepareTunnel() method
-
- 07 10月, 2009 2 次提交
-
-
由 Ryota Ozaki 提交于
* src/qemu/qemu_driver.c: The positive return value of qemuMonitorSetBalloon should be handled as a success
-
由 Jamie Strandboge 提交于
When James Morris originally submitted his sVirt patches (as seen in libvirt 0.6.1), he did not require on disk labelling for virSecurityDomainRestoreImageLabel. A later commit[2] changed this behavior to assume on disk labelling, which halts implementations for path-based MAC systems such as AppArmor and TOMOYO where vm->def->seclabel is required to obtain the label. * src/security/security_driver.h src/qemu/qemu_driver.c src/security/security_selinux.c: adds the 'virDomainObjPtr vm' argument back to *RestoreImageLabel
-
- 02 10月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Implementation of tunnelled migration, using a Unix Domain Socket on the qemu backend. Note that this requires very new versions of qemu (0.10.7 at least) in order to get the appropriate bugfixes. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 01 10月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
The upcoming tunnelled migration needs to be able to set a migration in progress in the background, as well as be able to cancel a migration when a problem has happened. This patch allows for both of these to properly work. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 29 9月, 2009 25 次提交
-
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Fix crash in scenario where XML parsing of hotplugged device failed & thus 'dev' is NULL
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new qemuMonitorRemoveHostNetwork() command for removing host networks * src/qemu/qemu_driver.c: Convert NIC hotplug methods over to use qemuMonitorRemoveHostNetwork()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg from qemuBuildHostNetStr which is no longer required * src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork() API for adding host network * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddHostNetwork() method for adding host networks
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr() args, and remove hardcoded 'nic' prefix. Leave it upto callers instead * src/qemu/qemu_driver.c: Switch over to using the new qemuMonitorAddPCINetwork() method for NIC hotplug * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddPCINetwork API for PCI network device hotplug
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle APIs for processing file handles * src/qemu/qemu_driver.c: Convert NIC hotplug method over to use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorAddPCIDisk() * src/qemu/qemu_driver.c: Convert over to using the new qemuMonitorAddPCIDisk() method, and remove now obsolete qemudEscape() method
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorRemovePCIDevice() for removing PCI device * src/qemu/qemu_driver.c: Convert all places removing PCI devices over to new qemuMonitorRemovePCIDevice() API
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorAddPCIHostDevice() * src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice() for PCI host device hotplug
-
由 Daniel P. Berrange 提交于
One API adds an exact device based on bus+dev, the other adds any device matching vendor+product * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch() commands. * src/qemu/qemu_driver.c: Switch over to using the new qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorAddUSBDisk() API * src/qemu/qemu_driver.c: Switch USB disk hotplug to the new src/qemu/qemu_driver.c API.
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorMigrateToCommand() API * src/qemu/qemu_driver.c: Switch over to using the qemuMonitorMigrateToCommand() API for core dumps and save to file APIs
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API qemuMonitorMigrateToHost() for doing TCP migration * src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost(). Also handle proper URIs (tcp:// as well as tcp:)
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorGetMigrationStatus() command. * src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus() command to check completion status.
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed() API during migration * src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new qemuMonitorSetMigrationSpeed() API
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new qemuMonitorGetBlockStatsInfo() command * src/qemu/qemu_driver.c: Remove directly use of blockstats in favour of calling qemuMonitorGetBlockStatsInfo()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory() * src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory() APIs
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code for qemudEscape * src/qemu/qemu_driver.c: Remove code that directly issues 'eject' and 'change' commands in favour of API calls.
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new qemuMonitorSetBalloon() based on existing code in qemudDomainSetMemoryBalloon * src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon() in favour of qemuMonitorSetBalloon(). Fix error code when balloon is not supported
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old qemudDomainGetMemoryBalloon() code into a new method called qemuMonitorGetBalloonInfo() * src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo() and remove qemudDomainGetMemoryBalloon().
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_driver.c: Remove use of 'system_powerdown' * src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new qemuMonitorSystemPowerdown() api call
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new qemuMonitorStopCPUs() API * src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop' with qemuMonitorStopCPUs()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename Rename qemudMonitorSendCont to qemuMonitorStartCPUs * src/qemu/qemu_driver.c: Update callers for new name
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new qemuMonitorSetVNCPassword() API * src/qemu/qemu_driver.c: Refactor qemudInitPasswords to call qemuMonitorSetVNCPassword()
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new qemuMonitorGetCPUInfo() command * src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to use qemuMonitorGetCPUInfo()
-
由 Daniel P. Berrange 提交于
Pull out all the QEMU monitor interaction code to a separate file. This will make life easier when we need to drop in a new implementation for the forthcoming QMP machine friendly monitor support. Next step is to add formal APIs for each monitor command, and remove direct commands for sending/receiving generic data. * src/Makefile.am: Add qemu_monitor.c to build * src/qemu/qemu_driver.c: Remove code for monitor interaction * src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New file for monitor interaction * po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
-
- 24 9月, 2009 1 次提交
-
-
由 Charles Duffy 提交于
* src/qemu/qemu_driver.c: initialize detach var
-
- 23 9月, 2009 1 次提交
-
-
由 Chris Lalancette 提交于
Add the virStrncpy function, which takes a dst string, source string, the number of bytes to copy and the number of bytes available in the dest string. If the source string is too large to fit into the destination string, including the \0 byte, then no data is copied and the function returns NULL. Otherwise, this function copies n bytes from source into dst, including the \0, and returns a pointer to the dst string. This function is intended to replace all unsafe uses of strncpy in the code base, since strncpy does *not* guarantee that the buffer terminates with a \0. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 22 9月, 2009 1 次提交
-
-
由 Charles Duffy 提交于
This was prevent virDomainSave from working properly by default, which is a bad thing. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 21 9月, 2009 4 次提交
-
-
由 Daniel P. Berrange 提交于
* src/Makefile.am, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c, tests/seclabeltest.c: Adapt for changed paths * src/security.c: Rename to src/security/security_driver.c * src/security.h: Rename to src/security/security_driver.h * src/security_selinux.c, src/security_selinux.h: Move to src/security/
-
由 Daniel P. Berrange 提交于
* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c, src/qemu_driver.h: Move to src/qemu/ * daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Adapt for changed paths
-
由 Daniel P. Berrange 提交于
* src/Makefile.am, src/proxy_internal.c, src/proxy_internal.h src/sexpr.c, src/sexpr.h, src/xen_unified.c, src/xen_unified.h, src/xen_internal.c, src/xen_internal.h, src/xen_inotify.c, src/xen_inotify.h, src/xend_internal.c, src/xend_internal.h, src/xm_internal.c, src/xm_internal.h, src/xs_internal.c, src/xs_internal.h: Move to src/xen/ directory * proxy/Makefile.am, proxy/libvirt_proxy.c, src/Makefile.am, src/libvirt.c, tests/sexpr2xmltest.c, tests/statstest.c, tests/xencapstest.c, tests/xmconfigtest.c, tests/xml2sexprtest.c: Adapt to changed xen location * src/stats_linux.h, src/stats_linux.c: Remove xen specific block stats APIs * src/qemu_driver.c, src/uml_driver.c: Add missing sys/un.h include uncovered after change to stats_linux.h * src/xen/block_stats.h, src/xen/block_stats.c: Add xen specific block stats APIs
-
由 Mark McLoughlin 提交于
* src/qemu_driver.c: sync the hostdev hot-unplug code with the disk/net code.
-