We still default to bhyveloader(1) if no explicit bootloader
configuration is supplied in the domain.

If the /domain/bootloader looks like grub-bhyve and the user doesn't
supply /domain/bootloader_args, we make an intelligent guess and try
chainloading the first partition on the disk (or a CD if one exists,
under the assumption that for a VM a CD is likely an install source).

Caveat: Assumes the HDD boots from the msdos1 partition. I think this is
a pretty reasonable assumption for a VM. (DrvBhyve with Bhyveload
already assumes that the first disk should be booted.)

I've tested both HDD and CD boot and they seem to work.

Pass the user-specified tun path down when creating tap device
when called from the qemu driver.

Also honor the vhost device path specified by user.

Update bhyveBuildDiskArgStr to support volumes:

 - Make virBhyveProcessBuildBhyveCmd and
   virBhyveProcessBuildLoadCmd take virConnectPtr as the
   first argument instead of bhyveConnPtr as virConnectPtr is
   needed for virStorageTranslateDiskSourcePool,
 - Add virStorageTranslateDiskSourcePool call to
   virBhyveProcessBuildBhyveCmd and
   virBhyveProcessBuildLoadCmd,
 - Allow disks of type VIR_STORAGE_TYPE_VOLUME

Add support for CDROM devices for bhyve driver using
bhyve(8)'s 'ahci-cd' device type.

As bhyve currently does not support media insertion at runtime,
disallow to start a domain with an empty source path for cdrom
devices.

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

bhyveBuildNetArgStr() calls virNetDevTapCreateInBridgePort() and
passes tapfd = NULL, but tapfdSize = 1. That is wrong, because
if virNetDevTapCreateInBridgePort() crashes after successfully
creating a TAP device, it'll jump to 'error' label, that
loops over tapfd and calls VIR_FORCE_CLOSE:

   for (i = 0; i < tapfdSize && tapfd[i] >= 0; i++)

In that case we get a segfault.

As the bhyve code doesn't use tapfd, pass NULL and set tapfdSize to 0.

Automatically allocate PCI addresses for devices instead
of hardcoding them in the driver code. The current
allocation schema is to dedicate an entire slot for each devices.

Also, allow having arbitrary number of devices.

* bhyve_command.c (bhyveBuildNetArgStr, virBhyveProcessBuildBhyveCmd):
  add dryRun mode which doesn't create any devices when enabled
* bhyve_command.c (virBhyveProcessBuildBhyveCmd,
  virBhyveProcessBuildDestroyCmd, virBhyveProcessBuildLoadCmd): accept
  virDomainDefPtr instead of virDomainObjPtr.

nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.

This patch adds new 'nmdm' character device type. Its definition
looks this way:

<serial type='nmdm'>
  <source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>

Master is passed to the hypervisior and slave is used for client
connection.

Also implement domainOpenConsole() for bhyve driver based on that.

A continuation of the migration of disk details to virstoragefile.
This patch moves a single enum, but converting the name has quite
a bit of fallout.

* src/conf/domain_conf.h (virDomainDiskType): Move...
* src/util/virstoragefile.h (virStorageType): ...and rename.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Update clients.
* src/conf/domain_conf.c (virDomainDiskSourceDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefFormat, virDomainDiskGetActualType)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Likewise.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDiskDefFormat):
Likewise.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Likewise.
* src/locking/domain_lock.c (virDomainLockManagerAddDisk):
Likewise.
* src/lxc/lxc_controller.c
(virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/parallels/parallels_driver.c (parallelsGetHddInfo):
Likewise.
* src/phyp/phyp_driver.c (phypDiskType): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuTranslateDiskSourcePool)
(qemuTranslateSnapshotDiskSourcePool): Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDetermineDiskChain): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalBackingActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/security/security_apparmor.c
(AppArmorRestoreSecurityImageLabel)
(AppArmorSetSecurityImageLabel): Likewise.
* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
* src/storage/storage_backend.c (virStorageFileBackendForType):
Likewise.
* src/storage/storage_backend_fs.c (virStorageFileBackendFile)
(virStorageFileBackendBlock): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageFileBackendGluster): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives)
(vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Likewise.
* src/vmware/vmware_conf.c (vmwareVmxPath): Likewise.
* src/vmx/vmx.c (virVMXParseDisk, virVMXFormatDisk)
(virVMXFormatFloppy): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr)
(xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: NEric Blake <eblake@redhat.com>

To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().

We use virBhyveTapGetRealDeviceName() to map network interface name
to a real device path, trying to open possible devices and getting
names by ioctl.

Make it skip devices that fail to open with EBUSY because they're
most likely already used by other VMs.

Part of a series of cleanups to use new accessor methods.

* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Use accessors.
Signed-off-by: NEric Blake <eblake@redhat.com>

Add support for MAC address configuration on network bridge
interface.

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Addition of the hostbridge device was mistakenly placed to
bhyveBuildNetArgStr(). This could result in hostbridge device not being
added to the commandline if there are no network devices specified, but
hostbridge device should be added unconditionally.

Fix by placing it to virBhyveProcessBuildBhyveCmd().

Some of these are leftovers from renaming the files, others
are just typos.

Also introduce an ugly awk script to enforce this.

At this point it has a limited functionality and is highly
experimental. Supported domain operations are:

  * define
  * start
  * destroy
  * dumpxml
  * dominfo

It's only possible to have only one disk device and only one
network, which should be of type bridge.