- 13 4月, 2013 1 次提交
-
-
由 Stefan Berger 提交于
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Tested-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
-
- 08 4月, 2013 1 次提交
-
-
由 Osier Yang 提交于
With this patch, one can specify the disk source using libvirt storage like: <disk type='volume' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source pool='default' volume='fc18.img'/> <target dev='vdb' bus='virtio'/> </disk> "seclabels" and "startupPolicy" are not supported for this new disk type ("volume"). They will be supported in later patches. docs/formatdomain.html.in: * Add documents for new XMLs docs/schemas/domaincommon.rng: * Add rng for new XMLs; src/conf/domain_conf.h: * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef) * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType src/conf/domain_conf.c: * New helper virDomainDiskSourcePoolDefParse to parse the 'volume' type disk source. * New helper virDomainDiskSourcePoolDefFree to free the source def if 'volume' type disk. tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml: tests/qemuxml2xmltest.c: * New test
-
- 06 4月, 2013 1 次提交
-
-
由 Osier Yang 提交于
This introduce a new attribute "num_queues" (same with the good name QEMU uses) for virtio-scsi controller. An example of the XML: <controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/> The corresponding QEMU command line: -device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
-
- 05 4月, 2013 3 次提交
-
-
由 Peter Krempa 提交于
This patch removes the defaultDiskDriverName from the virCaps structure. This particular default value is used only in the qemu driver so this patch uses the recently added callback to fill the driver name if it's needed instead of propagating it through virCaps.
-
由 Peter Krempa 提交于
Move the xmlopt and caps arguments to the end of the argument list.
-
由 Peter Krempa 提交于
This patch is the result of running: for i in $(git ls-files | grep -v html | grep -v \.po$ ); do sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i done and a few manual tweaks.
-
- 22 3月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
This does nothing more than adding the new device and capability. The device is present since QEMU 1.2.0. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 21 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
This plumbs in the XML description of iSCSI shares. The next patches will add support for the libiscsi userspace initiator. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 3月, 2013 4 次提交
-
-
由 Paolo Bonzini 提交于
QEMU 1.3 and newer support an alternative URI-based syntax to specify the location of an NBD server. Libvirt can keep on using the old syntax in general, but only the URI syntax supports IPv6 addresses. The URI syntax also supports relative paths to Unix sockets. These should never be used but aren't explicitly blocked either by the parser, so support it just in case. The URI syntax is intentionally compatible with Gluster's, and the code can be reused. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Paolo Bonzini 提交于
This reuses the XML format that was introduced for Gluster. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Paolo Bonzini 提交于
These are supported by nbd-server and by the NBD server that QEMU embeds for live image access. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Paolo Bonzini 提交于
Enable more testing of NBD parsing, to ensure rewrites work. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 13 3月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
The virCaps structure gathered a ton of irrelevant data over time that. The original reason is that it was propagated to the XML parser functions. This patch aims to create a new data structure virDomainXMLConf that will contain immutable data that are used by the XML parser. This will allow two things we need: 1) Get rid of the stuff from virCaps 2) Allow us to add callbacks to check and add driver specific stuff after domain XML is parsed. This first attempt removes pointers to private data allocation functions to this new structure and update all callers and function that require them.
-
- 25 2月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Adds XML parsing and qemu commandline tests for the VirtIO RNG device support.
-
- 08 2月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
To enable virCapabilities instances to be reference counted, turn it into a virObject. All cases of virCapabilitiesFree turn into virObjectUnref Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 07 1月, 2013 1 次提交
-
-
由 Osier Yang 提交于
Like "rawio", "sgio" is only allowed for block disk of device type "lun". It doesn't default disk->sgio to "filtered" when parsing, as it won't be able to distinguish explicitly requested "filtered" and a default "filtered" in driver then. We have to error out for explicit request when the kernel doesn't support the new sysfs knob "unpriv_sgio", however, for defaulted "filtered", we can just ignore it if the kernel doesn't support "unpriv_sgio".
-
- 07 12月, 2012 1 次提交
-
-
由 Osier Yang 提交于
QEMU supports setting vendor and product strings for disk since 1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch exposes it with new XML elements <vendor> and <product> of disk device.
-
- 29 11月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Remove the obsolete 'qemud' naming prefix and underscore based type name. Introduce virQEMUDriverPtr as the replacement, in common with LXC driver naming style
-
- 18 10月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds QEMU support for the "relaxed" feature implemented by previous patch.
-
- 20 9月, 2012 2 次提交
-
-
由 Martin Kletzander 提交于
-
由 Martin Kletzander 提交于
-
- 14 9月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
This patch adds full support for EOI setting for domains. Because this is CPU feature (flag), the model needs to be added even when it's not specified. Fortunately this problem was already solved with kvmclock, so this patch simply abuses that. And due to the size of the patch (17 lines) I dared to include the tests.
-
- 03 9月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Few tests were added which are checking whether the parsing of the xml and command-line arguments is working and compatible with each other.
-
- 16 8月, 2012 1 次提交
-
-
由 Laine Stump 提交于
The following config elements now support a <vlan> subelements: within a domain: <interface>, and the <actual> subelement of <interface> within a network: the toplevel, as well as any <portgroup> Each vlan element must have one or more <tag id='n'/> subelements. If there is more than one tag, it is assumed that vlan trunking is being requested. If trunking is required with only a single tag, the attribute "trunk='yes'" should be added to the toplevel <vlan> element. Some examples: <interface type='hostdev'/> <vlan> <tag id='42'/> </vlan> <mac address='52:54:00:12:34:56'/> ... </interface> <network> <name>vlan-net</name> <vlan trunk='yes'> <tag id='30'/> </vlan> <virtualport type='openvswitch'/> </network> <interface type='network'/> <source network='vlan-net'/> ... </interface> <network> <name>trunk-vlan</name> <vlan> <tag id='42'/> <tag id='43'/> </vlan> ... </network> <network> <name>multi</name> ... <portgroup name='production'/> <vlan> <tag id='42'/> </vlan> </portgroup> <portgroup name='test'/> <vlan> <tag id='666'/> </vlan> </portgroup> </network> <interface type='network'/> <source network='multi' portgroup='test'/> ... </interface> IMPORTANT NOTE: As of this patch there is no backend support for the vlan element for *any* network device type. When support is added in later patches, it will only be for those select network types that support setting up a vlan on the host side, without the guest's involvement. (For example, it will be possible to configure a vlan for a guest connected to an openvswitch bridge, but it won't be possible to do that for one that is connected to a standard Linux host bridge.)
-
- 18 5月, 2012 1 次提交
-
-
由 Marc-André Lureau 提交于
Test new codec type element.
-
- 16 5月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Currently each USB2 companion controller gets put on a separate PCI slot. Not only is this wasteful of PCI slots, but it is not in compliance with the spec for USB2 controllers. The master echi1 and all companion controllers should be in the same slot, with echi1 in function 7, and uhci1-3 in functions 0-2 respectively. * src/qemu/qemu_command.c: Special case handling of USB2 controllers to apply correct pci slot assignment * tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.args, tests/qemuxml2argvdata/qemuxml2argv-usb-ich9-ehci-addr.xml: Expand test to cover automatic slot assignment
-
- 09 5月, 2012 2 次提交
-
-
由 Osier Yang 提交于
With this patch, one can also fully drive numad by: <vcpu>2</vcpu> <numatune> <memory placement='auto'/> </numatune> New tests are added.
-
由 Osier Yang 提交于
Though numad will manage the memory allocation of task dynamically, it wants management application (libvirt) to pre-set the memory policy according to the advisory nodeset returned from querying numad, (just like pre-bind CPU nodeset for domain process), and thus the performance could benefit much more from it. This patch introduces new XML tag 'placement', value 'auto' indicates whether to set the memory policy with the advisory nodeset from numad, and its value defaults to the value of <vcpu> placement, or 'static' if 'nodeset' is specified. Example of the new XML tag's usage: <numatune> <memory placement='auto' mode='interleave'/> </numatune> Just like what current "numatune" does, the 'auto' numa memory policy setting uses libnuma's API too. If <vcpu> "placement" is "auto", and <numatune> is not specified explicitly, a default <numatume> will be added with "placement" set as "auto", and "mode" set as "strict". The following XML can now fully drive numad: 1) <vcpu> placement is 'auto', no <numatune> is specified. <vcpu placement='auto'>10</vcpu> 2) <vcpu> placement is 'auto', no 'placement' is specified for <numatune>. <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='interleave'/> </numatune> And it's also able to control the CPU placement and memory policy independently. e.g. 1) <vcpu> placement is 'auto', and <numatune> placement is 'static' <vcpu placement='auto'>10</vcpu> <numatune> <memory mode='strict' nodeset='0-10,^7'/> </numatune> 2) <vcpu> placement is 'static', and <numatune> placement is 'auto' <vcpu placement='static' cpuset='0-24,^12'>10</vcpu> <numatune> <memory mode='interleave' placement='auto'/> </numatume> A follow up patch will change the XML formatting codes to always output 'placement' for <vcpu>, even it's 'static'.
-
- 23 4月, 2012 1 次提交
-
-
由 Eric Blake 提交于
In order to track a block copy job across libvirtd restarts, we need to save internal XML that tracks the name of the file holding the mirror. Displaying this name in dumpxml might also be useful to the user, even if we don't yet have a way to (re-) start a domain with mirroring enabled up front. This is done with a new <mirror> sub-element to <disk>, as in: <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/original.img'/> <mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/> ... </disk> For now, the element is output-only, in live domains; it is ignored when defining a domain or hot-plugging a disk (since those contexts use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears when libvirt knows that the job has changed from the initial pulling phase over to the mirroring phase, although absence of the attribute is not a sure indicator of the current phase. If we come up with a way to make qemu start with mirroring enabled, we can relax the xml restriction, and allow <mirror> (but not attribute 'ready') on input. Testing active-only XML meant tweaking the testsuite slightly, but it was worth it. * docs/schemas/domaincommon.rng (diskspec): Add diskMirror. * docs/formatdomain.html.in (elementsDisks): Document it. * src/conf/domain_conf.h (_virDomainDiskDef): New members. * src/conf/domain_conf.c (virDomainDiskDefFree): Clean them. (virDomainDiskDefParseXML): Parse them, but only internally. (virDomainDiskDefFormat): Output them. * tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file. * tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise. * tests/qemuxml2xmltest.c (testInfo): Alter members. (testCompareXMLToXMLHelper): Allow more test control. (mymain): Run new test.
-
- 27 3月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Return statements with parameter enclosed in parentheses were modified and parentheses were removed. The whole change was scripted, here is how: List of files was obtained using this command: git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \ grep -e '\.[ch]$' -e '\.py$' Found files were modified with this command: sed -i -e \ 's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \ -e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_' Then checked for nonsense. The whole command looks like this: git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \ grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \ 's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \ -e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
-
- 08 3月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Output is still in kibibytes, but input can now be in different scales for ease of typing. * src/conf/domain_conf.c (virDomainParseMemory): New helper. (virDomainDefParseXML): Use it when parsing. * docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement to memoryElement and update callers. * docs/formatdomain.html.in (elementsMemoryAllocation): Document scaling. * tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test. * tests/qemuxml2xmltest.c: Likewise. * tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
-
- 06 3月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This is the new interface type that sets up an SR-IOV PCI network device to be assigned to the guest with PCI passthrough after initializing some network device-specific things from the config (e.g. MAC address, virtualport profile parameters). Here is an example of the syntax: <interface type='hostdev' managed='yes'> <source> <address type='pci' domain='0' bus='0' slot='4' function='3'/> </source> <mac address='00:11:22:33:44:55'/> <address type='pci' domain='0' bus='0' slot='7' function='0'/> </interface> This would assign the PCI card from bus 0 slot 4 function 3 on the host, to bus 0 slot 7 function 0 on the guest, but would first set the MAC address of the card to 00:11:22:33:44:55. NB: The parser and formatter don't care if the PCI card being specified is a standard single function network adapter, or a virtual function (VF) of an SR-IOV capable network adapter, but the upcoming code that implements the back end of this config will work *only* with SR-IOV VFs. This is because modifying the mac address of a standard network adapter prior to assigning it to a guest is pointless - part of the device reset that occurs during that process will reset the MAC address to the value programmed into the card's firmware. Although it's not supported by any of libvirt's hypervisor drivers, usb network hostdevs are also supported in the parser and formatter for completeness and consistency. <source> syntax is identical to that for plain <hostdev> devices, except that the <address> element should have "type='usb'" added if bus/device are specified: <interface type='hostdev'> <source> <address type='usb' bus='0' device='4'/> </source> <mac address='00:11:22:33:44:55'/> </interface> If the vendor/product form of usb specification is used, type='usb' is implied: <interface type='hostdev'> <source> <vendor id='0x0012'/> <product id='0x24dd'/> </source> <mac address='00:11:22:33:44:55'/> </interface> Again, the upcoming patch to fill in the backend of this functionality will log an error and fail with "Unsupported Config" if you actually try to assign a USB network adapter to a guest using <interface type='hostdev'> - just use a standard <hostdev> entry in that case (and also for single-port PCI adapters).
-
- 28 2月, 2012 1 次提交
-
-
由 Osier Yang 提交于
-
- 13 2月, 2012 2 次提交
-
-
由 Daniel Veillard 提交于
This reverts commit 7b345b69. Conflicts: tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-vscsi.xml
-
由 Daniel Veillard 提交于
This reverts commit c9abfadf. Conflicts: tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-virtio-scsi.xml
-
- 07 2月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Commit b170eb99 introduced a bug: domains that had an explicit <seclabel type='none'/> when started would not be reparsed if libvirtd restarted. It turns out that our testsuite was not exercising this because it never tried anything but inactive parsing. Additionally, the live XML for such a domain failed to re-validate. Applying just the tests/ portion of this patch will expose the bugs that are fixed by the other two files. * docs/schemas/domaincommon.rng (seclabel): Allow relabel under type='none'. * src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG, presence of <seclabel> with no type implies dynamic. Don't require sub-elements for type='none'. * tests/qemuxml2xmltest.c (mymain): Add test. * tests/qemuxml2argvtest.c (mymain): Likewise. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file. * tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file. Reported by Ansis Atteka.
-
- 04 2月, 2012 1 次提交
-
-
由 Eric Blake 提交于
The bulk of this patch was done with: sed -i 's/\(\bfree *(/VIR_FREE(/g' tests/*.c followed by fixing the few compile errors that resulted. * cfg.mk (exclude_file_name_regexp--sc_prohibit_raw_allocation): Remove tests from exemption. * tests/testutils.h: Add common header. * tests/commandhelper.c: Fix offenders. * tests/cputest.c: Likewise. * tests/domainsnapshotxml2xmltest.c: Likewise. * tests/interfacexml2xmltest.c: Likewise. * tests/networkxml2argvtest.c: Likewise. * tests/networkxml2xmltest.c: Likewise. * tests/nodedevxml2xmltest.c: Likewise. * tests/nodeinfotest.c: Likewise. * tests/nwfilterxml2xmltest.c: Likewise. * tests/qemuargv2xmltest.c: Likewise. * tests/qemuxml2argvtest.c: Likewise. * tests/qemuxml2xmltest.c: Likewise. * tests/qemuxmlnstest.c: Likewise. * tests/qparamtest.c: Likewise. * tests/sexpr2xmltest.c: Likewise. * tests/storagepoolxml2xmltest.c: Likewise. * tests/storagevolxml2xmltest.c: Likewise. * tests/testutils.c: Likewise. * tests/virshtest.c: Likewise. * tests/xencapstest.c: Likewise. * tests/xmconfigtest.c: Likewise. * tests/xml2sexprtest.c: Likewise.
-
- 31 1月, 2012 1 次提交
-
-
由 Laine Stump 提交于
When support for the rombar option was added, it was only added for PCI passthrough devices, configured with <hostdev>. The same option is available for any network device that is attached to the guest's PCI bus. This patch allows setting rombar for any PCI network device type. After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*, I decided to rename those files (to qemuxml2argv-pci-rom.*) to more accurately reflect the additional tests, and also noticed that up to now we've only been performing a domainschematest for that case, so I added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in the process found some bugs whose fixes I squashed into previous commits of this series).
-
- 27 1月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
QEMU supports a bunch of CPUID features that are tied to the kvm CPUID nodes rather than the processor's. They are "kvmclock", "kvm_nopiodelay", "kvm_mmu", "kvm_asyncpf". These are not known to libvirt and their CPUID leaf might move if (for example) the Hyper-V extensions are enabled. Hence their handling would anyway require some special-casing. However, among these the most useful is kvmclock; an additional "property" of this feature is that a <timer> element is a better model than a CPUID feature. Although, creating part of the -cpu command-line from something other than the <cpu> XML element introduces some ugliness. Reviewed-by: NJiri Denemark <jdenemar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-