Use only one switch case selecting job type and decide what's successful
outcome on a case-by-case basis.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce qemuMonitorTransactionBitmapMergeSourceAddBitmap which adds
the appropriate entry into a virJSONValue array to be used with
qemuMonitorTransactionBitmapMerge. Bitmap merging supports two possible
formats and this new helper implements the more universal one specifying
also the source node name.

In addition use the new helper in the testQemuMonitorJSONTransaction
test.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Extract the linking and saving bits of checkpoint creation into
qemuCheckpointCreateFinalize so that qemuCheckpointCreateXML is a bit
simpler and also makes it reusable in the backup code.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Separate out individual steps of creating a checkpoint from
qemuCheckpointCreateXML into separate functions. This makes the function
more readable and understandable and also some of the new functions will
be reusable when we will be creating a checkpoint along with a backup
in the upcoming patches.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Prevent insane configurations by enforcing that disk bitmap for a
checkpoint must match the name of the checkpoint.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If we are updating the current checkpoint when redefining by mentioning
the current checkpoint as a parent of the newly redefined one we don't
have to clear it first.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's no point in clearing the current checkpoint when we are just
changing the definition of the current checkpoint as by the virtue of the
'update_current' flag the same checkpoint would become current in
qemuCheckpointCreateXML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The 'other' variable was used to store the parent of the redefined
checkpoint and then the existing version of the currently redefined
checkpoint. Make it less confusing by adding a 'parent' variable for the
first case.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The variable is unused so we can drop it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There's no point in clearing the current snapshot when we are just
changing the definition of the current snapshot as by the virtue of the
'update_current' flag the same snapshot would become current in
qemuDomainSnapshotCreateXML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

doTestQemuInternal and doTestQemu are used only when WITH_QEMU is
enabled.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Now that the only data we need for fully testing a QEMU binary is
the (version, arch) combo, we can stop providing that information
ourselves and instead rely on testQemuCapsIterate() automatically
picking up new input files as they are added to the repository,
the same way the qemucapabilities and qemucaps2xml tests already
behave.

Unsurprisingly, this change results in a bunch of extra output
files being created, significantly expanding our test coverage.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

For each QEMU version there are usually several different,
architecture-dependedn scenarios that we're interested in testing;
however, since the test matrix has to be explicitly created by
calling DO_TEST_QEMU() multiple times with different arguments, we
end up with spotty coverage.

Fix this by implementing the arch-specific rules in code, which
result in the full coverage for a (version, arch) combo being
automatically achieved with a single call to DO_TEST_QEMU().

Unsurprisingly, this change results in a bunch of extra output
files being created.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The full name of the test case, as well as the name of the QEMU
binary and corresponding capabilities file, can all be derived
from other information passed to the test, so there's no point in
asking the user to provide them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Macros become less and less appealing the more work you perform
inside them: DO_TEST_QEMU() has arguably already crossed that
threshold, and we're going to add even more code later on.

While factoring the code out of the macro, convert it to use the
GLib string manipulation functions and take advantage of autofree.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Requiring the user to provide the final string themselves will
make subsequent changes easier to implement.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

The usual convention is to use ${foo}test.c for the test program
itself and either ${foo}data/ or ${foo}outdata/, depending on
whether it contains both input and output files or only the latter,
for the corresponding data directory.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.

This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Right now users need to hardcode the suffix, which is not a big
deal since they're the ones who passed it to testQemuCapsIterate()
in the first place; however, since we're already passing most of
the information to the callback and we're going to add more later
on, it makes sense to be consistent and pass the suffix too.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

We're going to depend on the fact that the suffix starts with a
dot later on, so we better ensure that it does.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

If files whose name doesn't follow the expected format are added
to the repository, it's better to make the test suite fail than to
silently ignore them.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

We'll need this later.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Libtool gets a wrong order of arguments of libraries to install and it
fails when installing libvirt-admin.so that libvirt.so is not yet
installed.  Caused by commit <3097282d>.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

In few places we have the following code pattern:

  int ret;
  ... /* @ret is not accessed here */
  ret = f(...);
  return ret;

This pattern can be written less verbose:

  ...
  return f(...);

This patch was generated with following coccinelle spatch:

  @@
  type T;
  constant C;
  expression f;
  identifier ret;
  @@
  -T ret = C;
   ... when != ret
  -ret = f;
  -return ret;
  +return f;

Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

In v5.8.0-332-g3097282d the libvirt-admin.so was moved into
src/admin/ directory. However, corresponding .gitignore change
was left out.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These two functions have pattern that's preventing us from
simpler virAsprintf() -> g_strdup_printf() transition. Modify
their logic a bit.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In a few places our code relies on the fact that virAsprintf()
not only prints to allocated string but also that it returns the
length of that string. Fortunately, only few such places were
identified:

  https://www.redhat.com/archives/libvir-list/2019-September/msg01382.html

In case of virNWFilterSnoopLeaseFileWrite() and virFilePrintf()
we can use strlen() right after virAsprintf() to calculate the
length. In case of virDoubleToStr() it's only caller checks for
error case only, so we can limit the set of returned values to
just [-1, 0].
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Historically we did not support VPATH builds and everything was
generated into source directory.  The introduction of VPATH builds did
not changed the way how our documentation is handled.

This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is no need to keep old compatibility code around as it it will
never be used in our current source tree.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commit <124f0653> moved remote related
build rules into separate makefile but forgot to move this part as well.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is no need to have the libvirt-admin.so library definition in the
src directory.  In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Follow the same pattern as for other sub-directories where we create a
static library that is linked into libvirt.so.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This version is available on all supported OSes and includes the
transaction APIs.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All supported OSes have libnl-3.0 and netcf uses it so there is no need
to keep libnl-1.0 compatibility code.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In domain_conf.c we have virDomainSCSIDriveAddressIsUsed()
function which returns true or false if given drive address is
already in use for given domain config or not. However, it also
takes a shortcut and returns true (meaning address in use) if the
unit number equals 7. This is because for some controllers this
is reserved address. The limitation comes mostly from vmware and
applies to lsilogic, buslogic, spapr-vscsi and vmpvscsi models.
On the other hand, we were not checking for the maximum unit
number (aka LUN number) which is also relevant and differs from
model to model.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>