This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr

An upcoming patch will add a <virtualport> element to interfaces of
type='bridge', so it makes sense to give this function a more generic
name.

The auto-generated WWN comply with the new addressing schema of WWN:

<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>

We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.

Rename the src/util/netlink files to src/util/virnetlink to
better fit the naming scheme. Also rename nlComm to virNetlinkCommand.
Signed-off-by: ND. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

This was forgotten when the function was originally written (not
noticed because it wasn't used at the time). It's required for
proper compilation with modules enabled after applying the recent
virStorageVolResize patches.

This was forgotten when the function was initially written (not
noticed because it wasn't used at the time). It's required for proper
compilation with modules enabled after applying the recent rawio
patches.

The virEmitXMLWarning function should always have been in
the xml.[hc] files, and should use virXML as its name
prefix

* src/util/util.c, src/util/util.h: Remove virEmitXMLWarning
* src/util/xml.c, src/util/xml.h: Add virXMLEmitWarning

Move the virMacAddrXXX functions out of util.[ch] and into a
new dedicate file virmacaddr.[ch]

Rename virFormatMacAddr, virGenerateMacAddr and virParseMacAddr
to virMacAddrFormat, virMacAddrGenerate and virMacAddrParse
respectively

Introduce a function that rebuilds all running VMs' filters. Call
this function when reloading the nwfilter driver.

This addresses a problem introduced by the 2nd patch that typically
causes no filters to be reinstantiate anymore upon driver reload
since their XML has not changed. Yet the current behavior is that
upon a SIGHUP all filters get reinstantiated.

The old virRandom() API was not generating good random numbers.
Replace it with a new API virRandomBits which instead of being
told the upper limit, gets told the number of bits of randomness
required.

* src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits,
  and move virRandomInitialize
* src/util/util.h, src/util/util.c: Delete virRandom and
  virRandomInitialize
* src/libvirt.c, src/security/security_selinux.c,
  src/test/test_driver.c, src/util/iohelper.c: Update for
  changes from virRandom to virRandomBits
* src/storage/storage_backend_iscsi.c: Remove bogus call
  to virRandomInitialize & convert to virRandomBits

Add a virFileTouch API which ensures that a file will always
exist, even if zero length

* src/util/virfile.c, src/util/virfile.h,
  src/libvirt_private.syms: Introduce virFileTouch

While we still don't want to enable gcc's new -Wformat-literal
warning, I found a rather easy case where the warning could be
reduced, by getting rid of obsolete error-reporting practices.
This is the last place where we were passing the (unused) net
and conn arguments for constructing an error.

* src/util/virterror_internal.h (virErrorMsg): Delete prototype.
(virReportError): Delete macro.
* src/util/virterror.c (virErrorMsg): Make static.
* src/libvirt_private.syms (virterror_internal.h): Drop export.
* src/util/conf.c (virConfError): Convert to macro.
(virConfErrorHelper): New function, and adjust error calls.
* src/xen/xen_hypervisor.c (virXenErrorFunc): Delete.
(xenHypervisorGetSchedulerType)
(xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters)
(xenHypervisorDomainBlockStats)
(xenHypervisorDomainInterfaceStats)
(xenHypervisorDomainGetOSType)
(xenHypervisorNodeGetCellsFreeMemory, xenHypervisorGetVcpus):
Update callers.

Preparation for another patch that refactors common patterns
into the new file for fewer lines of code overall.

* src/util/util.h (virTypedParameterArrayClear): Move...
* src/util/virtypedparam.h: ...to new file.
(virTypedParameterArrayValidate, virTypedParameterAssign): New
prototypes.
* src/util/util.c (virTypedParameterArrayClear): Likewise.
* src/util/virtypedparam.c: New file.
* po/POTFILES.in: Mark file for translation.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms (util.h): Split...
(virtypedparam.h): to new section.
(virkeycode.h): Sort.
* daemon/remote.c: Adjust callers.
* tools/virsh.c: Likewise.

To avoid a namespace clash with forthcoming identity APIs,
rename the virNet*GetLocalIdentity() APIs to have the form
virNet*GetUNIXIdentity()

* daemon/remote.c, src/libvirt_private.syms: Update
  for renamed APIs
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h,
  src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: s/LocalIdentity/UNIXIdentity/

Given an LXC guest with a root filesystem path of

  /export/lxc/roots/helloworld/root

During startup, we will pivot the root filesystem to end up
at

  /.oldroot/export/lxc/roots/helloworld/root

We then try to open

  /.oldroot/export/lxc/roots/helloworld/root/dev/pts

Now consider if '/export/lxc' is an absolute symlink pointing
to '/media/lxc'. The kernel will try to open

  /media/lxc/roots/helloworld/root/dev/pts

whereas it should be trying to open

  /.oldroot//media/lxc/roots/helloworld/root/dev/pts

To deal with the fact that the root filesystem can be moved,
we need to resolve symlinks in *any* part of the filesystem
source path.

* src/libvirt_private.syms, src/util/util.c,
  src/util/util.h: Add virFileResolveAllLinks to resolve
  all symlinks in a path
* src/lxc/lxc_container.c: Resolve all symlinks in filesystem
  paths during startup

This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.

When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.

Usage:
<filesystem type='mount' accessmode='passthrough'>
  <driver type='path' wrpolicy='immediate'/>
  <source dir='/export/to/guest'/>
  <target dir='mount_tag'/>
</filesystem>

Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: NDeepak C Shetty <deepakcs@linux.vnet.ibm.com>

This adds support for host-model and host-passthrough CPU modes to qemu
driver. The host-passthrough mode is mapped to -cpu host.

VIR_DOMAIN_XML_UPDATE_CPU flag for virDomainGetXMLDesc may be used to
get updated custom mode guest CPU definition in case it depends on host
CPU. This patch implements the same behavior for host-model and
host-passthrough CPU modes.

This avoids a linking error.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The new introduced optional attribute "copy_on_read</code> controls
whether to copy read backing file into the image file. The value can
be either "on" or "off". Copy-on-read avoids accessing the same backing
file sectors repeatedly and is useful when the backing file is over a
slow network. By default copy-on-read is off.

Address side effect of accessing a variable via an index: Filters
accessing a variable where an element is accessed that is beyond the
size of the list (for example $TEST[10] and only 2 elements are available)
cannot instantiate that filter. Test for this and report proper error
to user.

This patch introduces the capability to use a different iterator per
variable.

The currently supported notation of variables in a filtering rule like

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A' srcportstart='$B'/>
  </rule>

processes the two lists 'A' and 'B' in parallel. This means that A and B
must have the same number of 'N' elements and that 'N' rules will be 
instantiated (assuming all tuples from A and B are unique).

In this patch we now introduce the assignment of variables to different
iterators. Therefore a rule like

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A[@1]' srcportstart='$B[@2]'/>
  </rule>

will now create every combination of elements in A with elements in B since
A has been assigned to an iterator with Id '1' and B has been assigned to an
iterator with Id '2', thus processing their value independently.

The first rule has an equivalent notation of

  <rule action='accept' direction='out'>
     <tcp  srcipaddr='$A[@0]' srcportstart='$B[@0]'/>
  </rule>

Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.

* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.

Add a util function virDomainNetFind to find a domain's net def.

In order to avoid situation where a USB device is
in use by two domains, we must keep a list of already
attached devices like we do for PCI.

Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers

Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.

* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
  dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Remove all timer dispatch functions

The virDomainEventCallbackList and virDomainEventQueue APIs are
now solely helpers used internally by virDomainEventState APIs.
Remove their decls from domain_event.h since no driver code should
need to use them any more.

* src/conf/domain_event.c: Make virDomainEventCallbackList and
  virDomainEventQueue APIs static & remove some unused APIs
* src/conf/domain_event.h, src/libvirt_private.syms: Remove
  virDomainEventCallbackList and virDomainEventQueue APIs

While virDomainEventState has APIs for managing removal of callbacks,
while locked, adding callbacks in the first place requires direct
access to the virDomainEventCallbackList structure. This is not
threadsafe since it is bypassing the virDomainEventState locks

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Add APIs for managing callbacks
  via virDomainEventState.

When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Return count of callbacks when
  registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
  for change in APIs

This chunk of code below repeated in several functions, factor it into
a helper method virDomainLiveConfigHelperMethod to eliminate duplicated code
based on Eric and Adam's suggestion. I have tested it for all the
relevant APIs changed.
Signed-off-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLei Li <lilei@linux.vnet.ibm.com>

On RHEL 5, with libxml2-2.6.26, the build failed with:
virsh.c: In function 'vshNodeIsSuperset':
virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount'

(or if warnings aren't errors, a link failure later on).

* src/util/xml.h (virXMLChildElementCount): New prototype.
* src/util/xml.c (virXMLChildElementCount): New function.
* src/libvirt_private.syms (xml.h): Export it.
* tools/virsh.c (vshNodeIsSuperset): Use it.

The Mingw32 linker highlighted that the symbols for virtime.h
declared in libvirt_private.syms were incorrect

* src/libvirt_private.syms: Fix virtime.h symbols

The virTimestamp and virTimeMs functions in src/util/util.h
duplicate functionality from virtime.h, in a non-async signal
safe manner. Remove them, and convert all code over to the new
APIs.

* src/util/util.c, src/util/util.h: Delete virTimeMs and virTimestamp
* src/lxc/lxc_driver.c, src/qemu/qemu_domain.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/util/event_poll.c: Convert to use
  virtime APIs

The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.

Introduce a new internal API which is async signal safe.

  virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
                      where available, otherwise falls back to the unsafe
                      gettimeofday

  virTimeFieldsNowRaw  replacements for gmtime(), convert a timestamp
  virTimeFieldsThenRaw into a broken out set of fields. No localtime()
                       replacement is provided, because converting to
                       local time is not practical with only async signal
                       safe APIs.

  virTimeStringNowRaw  replacements for strftime() which print a timestamp
  virTimeStringThenRaw into a string, using a pre-determined format, with
                       a fixed size buffer (VIR_TIME_STRING_BUFLEN)

For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe

* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs

Fix the build on Mingw32 by removing the now obsolete
virGetPMCapabilities symbol from the private exports file

* src/libvirt_private.syms: Remove virGetPMCapabilities

* src/libvirt_private.syms: Export virNodeSuspendSupportsTarget
  and virNodeSuspendGetTargetMask