Parthelper is only compiled if both --with-libvirtd
and --with-storage-disk are set.
Signed-off-by: NRuben Kerkhof <ruben@rubenkerkhof.com>

This patch adds documentation about the 802.1Qbh related parameters
of the virtualport element for 'direct' interfaces.
Signed-off-by: NDavid S. Wang <dwang2@cisco.com>
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com>

Introduce libvirt support for Xen HVM Viridian (Hyper-V) enlightenment
interface guest feature.

 src/conf/domain_conf.c     |    3 ++-
 src/conf/domain_conf.h     |    1 +
 src/xen/xen_hypervisor.c   |   11 +++++++++++
 src/xenapi/xenapi_driver.c |    2 ++
 src/xenapi/xenapi_utils.c  |    2 ++
 src/xenxs/xen_sxpr.c       |    4 ++++
 src/xenxs/xen_xm.c         |   12 +++++++++++-
 7 files changed, 33 insertions(+), 2 deletions(-)

Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":

  # virsh autostart example
  error: Failed to mark domain example as autostarted
  error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists

This patch ensures the autostart flag is set correctly even when the
domain is already defined.

Fixes:

  https://bugzilla.redhat.com/show_bug.cgi?id=632100
  https://bugzilla.redhat.com/show_bug.cgi?id=675319Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Added:
* Virt ruby bindings
* Foreman for provisioning and webui.

Signed-off-by: NNeil Wilson <neil@aldur.co.uk>

I have been finding that some UML command line networking parameters are
being generated incorrectly.

For more information, see
https://bugzilla.redhat.com/show_bug.cgi?id=706295 .

As reported by Diego Blanco in

  https://bugzilla.redhat.com/show_bug.cgi?id=702602

commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.

There're several other issues reported with current OpenVZ driver:

 #1: unclear error message when parsing "CPUS=" line
 #2: openvz driver goes into crashing loop
 #3: "NETIF=" line in configuration is not parsed correctly
 #4: aborts even when optional parameter is missing
 #5: there's a potential memory leak

This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.

Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.

 * src/qemu/qemu_migration.c: add some additional job signal
   flags for doing blkstat/blkinfo during a migration
 * src/qemu/qemu_domain.c: add a condition variable that can be
   used to efficiently wait for the migration code to clear the
   signal flag
 * src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
   job signal flags during migration

When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>

starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: NDirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.

Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".

Fix regression in virsh logging
Signed-off-by: NSupriya Kannery <supriyak@in.ibm.com>

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=664059

Reattaching pci device back to host without destroying guest or
detaching device from guest would cause host to crash. This patch adds
a check before doing device reattach. If the device is being assigned
to guest, libvirt refuses to reattach device to host. The patch only
works for Xen, for it just checks xenstore to get pci device
information.
Signed-off-by: NYufang Zhang <yuzhang@redhat.com>

They don't make any sense when used together.

Allow libvirt-guests to stage a delay between guest startups,
to avoid system load caused by back-to-back startup.

gcc 4.6 warns when a variable is initialized but isn't used afterwards:

vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable]

This patch fixes these warnings. There are still 2 offending files:

- vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several
  times outside of #ifdef. Fixing the warning would have required wrapping
  all the assignment inside #ifdef which hurts readability.

vbox/vbox_tmpl.c: In function 'vboxAttachDrives':
vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable]

- esx_vi_types.generated.c: the name implies it's generated code and I
  didn't want to dive into the code generator

esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free':
esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]

This patch enables the relative backing file path support provided by
qemu-img create.

If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.

Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.)  This patch helps to do that
by making additional logging available for the following events:

  creating/defining/undefining domains
  creating/defining/undefining/starting/stopping networks
  creating/defining/undefining/starting/stopping storage pools
  creating/defining/undefining/starting/stopping storage volumes.

* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
  src/storage/storage_driver.c: provide more VIR_INFO logging

* AUTHORS: Update, to satisfy 'make syntax-check'.

Wen Congyang gained commiter access

Created a new section of previous commiters to the project
but not involved much anymore: Karel Zak, Atsushi SAKAI,
Dave Leskovec and Dan Smith

The current description suggests that you always have to provide
a valid typeVer pointer. But if you want only the libvirt version
it's also possible to set type and typeVer to NULL to skip the
hypervisor part.

This patch changes zerobuf variable from array to VIR_ALLOC_N().
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>

This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Signed-off-by: NEric Blake <eblake@redhat.com>

maybe sounds strange but I've used this signature for years.
see http://en.wikipedia.org/wiki/Family_name

* src/util/hash.c: virHashAddEntry and virHashUpdateEntry were missing NULL
  checks on strdup
* AUTHORS: add Christophe Fergeau

Enable cgroup hierarchy for blkio cgroup
Acked-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>

* AUTHORS: Adjust for recent commits.

When compiling libvirt with GCC 3.4.6 the following warning is being triggered quite a lot:

util/memory.h:60: warning: declaration of 'remove' shadows a global declaration
/usr/include/stdio.h:175: warning: shadowed declaration is here

Fix this by renaming the parameter to 'toremove'.

Depending if the qemu binary supports multiple pci-busses, the device
options will contain "bus=pci" or "bus=pci.0".

Only x86_64 and i686 seem to have support for multiple PCI-busses. When
a guest of these architectures is started, set the
QEMUD_CMD_FLAG_PCI_MULTIBUS flag.
Signed-off-by: NNiels de Vos <ndevos@redhat.com>

Allows io={threads|native} as an optional attribute to <driver>.
Signed-off-by: NEric Blake <eblake@redhat.com>

bugfix for https://bugzilla.redhat.com/show_bug.cgi?id=671050

virsh simply refutes to detach-interface in case when multiple
interfaces are attached and --mac is not specified.