This path can be dependent on the VM libdir, which contains its name

Need to convert the local function to virBuffer usage, so we
can use qemuBufferEscapeComma

This isn't sufficient on its own, since the VM name is used for things
like monitor paths, which we don't escape yet

Centralize the magic invocation for escaping commas on the qemu
command line, and document it a bit

QEMU_CAPS_DEVICE is always set nowadays, so we can drop the
non-DEVICE code paths

Rather than returning a "char *" indicating perhaps some sized set of
characters that is NUL terminated, alter the function to return 0 or -1
for success/failure and add two parameters to handle returning the
buffer and it's size.

The function no longer encodes the returned secret, rather it returns
the unencoded secret forcing callers to make the necessary adjustments.

Alter the callers to handle the adjusted model.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

The preferred name will be AES not IV, change current references
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

This matches how we handle spice gl='no' even if spice GL isn't
supported. Not too interesting in practice but I figure we should
be consistent

Extract the relevant parts of the existing checker and reuse them for
blockcopy since copying to a non-block device creates an invalid
configuration.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1209802

In qemuCheckDiskConfig would now use virDomainDiskSourceIsBlockType just
as a glorified version of virStorageSourceIsBlockLocal that reports
error messages. Replace it with the latter including the message for
clarity.

Commit c820fbff added support for iSCSI
disk as backing for <disk device='lun'>. We would not use it for a disk
type="volume" with direct access mode which basically maps to direct
iSCSI usage. Fix it by adding the storage source type accessor that
resolves the volume type.

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Add the data structure and infrastructure to support an initialization
vector (IV) secrets. The IV secret generation will need to have access
to the domain private master key, so let's make sure the prepare disk
and hostdev functions can accept that now.

Anywhere that needs to make a decision over which secret type to use
in order to fill in or use the IV secret has a switch added.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Create helper API's in order to build the network URI as shortly we will
be adding a new SecretInfo type
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1286709

Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...

Rather than an if statement, use a switch.

The switch will also catch the illegal usage of 'iothread' with some other
kind of unsupported bus configuration.

This adds a ports= attribute to usb controller XML, like

  <controller type='usb' model='nec-xhci' ports='8'/>

This maps to:

  qemu -device nec-usb-xhci,p2=8,p3=8

Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.

https://bugzilla.redhat.com/show_bug.cgi?id=1271408

Use it everywhere except for virQEMUCapsFillDomainFeatureGICCaps.

If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.

This patch adds an s390 panic device model and prevents setting a
device address on it.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Adding the default bus type ISA to the message.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Rather than take username and password as parameters, now take
a qemuDomainSecretInfoPtr and decode within the function.

NB: Having secinfo implies having the username for a plain type
    from a successful virSecretGetSecretString
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Similar to the qemuDomainSecretDiskPrepare, generate the secret
for the Hostdev's prior to call qemuProcessLaunch which calls
qemuBuildCommandLine. Additionally, since the secret is not longer
added as part of building the command, the hotplug code will need
to make the call to add the secret in the hostdevPriv.

Since this then is the last requirement to pass a virConnectPtr
to qemuBuildCommandLine, we now can remove that as part of these
changes. That removal has cascading effects through various callers.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Rather than needing to pass the conn parameter to various command
line building API's, add qemuDomainSecretPrepare just prior to the
qemuProcessLaunch which calls qemuBuilCommandLine. The function
must be called after qemuProcessPrepareHost since it's expected
to eventually need the domain masterKey generated during the prepare
host call. Additionally, future patches may require device aliases
(assigned during the prepare domain call) in order to associate
the secret objects.

The qemuDomainSecretDestroy is called after the qemuProcessLaunch
finishes in order to clear and free memory used by the secrets
that were recently prepared, so they are not kept around in memory
too long.

Placing the setup here is beneficial for future patches which will
need the domain masterKey in order to generate an encrypted secret
along with an initialization vector to be saved and passed (since
the masterKey shouldn't be passed around).

Finally, since the secret is not added during command line build,
the hotplug code will need to get the secret into the private disk data.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Commit 98c5c53d partially reverted the effort to use typecasted enums
for compiler notification. Turn it back.

Similarly to what commit 71408079 did with some internal paths,
clear vnc socket paths that were generated by us.  Having such path in
the definition can cause trouble when restoring the domain.  The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.

To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated.  And mark it as autogenerated
if it already exists and we're parsing live XML.

Best viewed with '-C'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

QEMU_BLOCK_IOTUNE_MAX is the maximum inclusively, so let's modify the
message so it makes sense.

https://bugzilla.redhat.com/show_bug.cgi?id=1329041Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

The values are currently limited to LLONG_MAX which causes some
problems.  QEMU conveniently changed their maximum to 1e15 (1 PB) which
is enough for some time and we need to adapt to that so that we don't
throw "Unknown error" messages.  Strictly limiting these values actually
fixes some corner case values (off-by-one checks in QEMU probably).

Since values out of the new specified range do not overflow anything,
change the type of error as well.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

We already reject a VM with min_guarantee early in the VM startup
in qemuProcessStartValidate

Now that there is just one format of the memory balloon command line
used the code can be merged into a single function.

Additionally with some tweaks to the control flow the code is easier to
read.

The change that made qemu not add the memballoon by default happened
prior to 0.12.0. Additionaly the comment was misleading due to the code
that was added below. Since we always need to add a balloon on the
commandline drop the comment.

This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.

As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.

During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.

This is backed by the qemu device "pxb".

The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.

busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.

During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.

The watchdog cli refactoring in 4666b762 dropped the temporary variable
we use to convert to action=dump to action=pause for the qemu cli, and
stored the converted value in the domain structure. Our other watchdog
handling code then treated it as though the user requested action=pause,
which broke action=dump handling.

Revive the temporary variable to fix things.

GCC in RHEL-6 complains about listen:

../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]

This renames all the listen to gListen.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Essentially revert commit 3a6204cb which added these to allow the test
suite to pass without depending on the host system state.

Since commit 4b527c1a we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.

There is no point the use two different getters on the same listen
structure few lines apart.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type.  The new function will auto-expand the listens array
and append a new listen.

The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen.  The two remaining uses can access the
listen structure directly.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>