Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf

Purely code motion at this point, plus adjustments to cleanly build.

Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.

Ensure virsystemdpriv.h gets included in dist tarballs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move all the InterfaceObj API's into their own module virinterfaceobj
from the interface_conf

Purely code motion at this point.

Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf

Purely code motion at this point, plus adjustments to cleanly build.

If driver modules are enabled turn storage driver backends into
dynamically loadable objects. This will allow greater modularity for
binary distributions, where heavyweight dependencies as rbd and gluster
can be avoided by selecting only a subset of drivers if the rest is not
necessary.

The storage modules are installed into 'LIBDIR/libvirt/storage-backend/'
and users can override the location by using
'LIBVIRT_STORAGE_BACKEND_DIR' environment variable.

rpm based distros will at this point install all the backends when
libvirt-daemon-driver-storage package is installed.

Compile the storage driver into modules rather than by compiling all
files together. All modules are still linked together statically.

The utils code should stay separated from other code (except for very
well justified cases). Unfortunately commit 272769be
made it trivial to break the separation (and not get slapped by the
syntax-check rule) by adding -I src/conf to the CFLAGS for utils.

Remove this shortcut and except the two offenders from the syntax check
so that the codebase can be kept separated.

Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.

Take the opporunity to also change the function names and in one case
the parameters slightly

Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.

Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.

While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.

Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: NOlga Krishtal <okrishtal@virtuozzo.com>

Separate the headers so that functions only required for testing of the
sheepdog backend are separated into their own file.

The file became a garbage dump for all kinds of utility functions over
time. Move them to a separate file so that the files can become a clean
interface for the storage backends.

libxl doesn't provide a way to write one log for each domain. Thus
we need to demux the messages. If our logger doesn't know to which
domain to attribute a message, then it will write it to the default
log file.

Starting with Xen 4.9 (commit f9858025 and following), libxl will
write the domain ID in an easy to grab manner. The logger introduced
by this commit will use it to demux the libxl log messages.

Thanks to the default log file, this logger will also work with older
versions of Xen.

* delete SDK header files for vbox older than 4.0
* delete .c files for vbox older than 4.0
* update vbox_XPCOMCGlue to use oldest supported header file, that is 4.0
  going forward.
* remove deleted files from Makefile.am

Add helper APIs / objects for managing secret events
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If the nss module is disabled we don't need to build the
supplementary library for it either.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This renames MSCOM_LIBS to WIN32_EXTRA_LIBS to make it consistent with
WIN32_EXTRA_CFLAGS.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Rename DRIVER_MODULE_(LDFLAGS|LIBS|CFLAGS) to unify the naming.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Instead of trying to fix our security drivers, we can use a
simple trick to relabel paths in both namespace and the host.
I mean, if we enter the namespace some paths are still shared
with the host so any change done to them is visible from the host
too.
Therefore, we can just enter the namespace and call
SetAllLabel()/RestoreAllLabel() from there. Yes, it has slight
overhead because we have to fork in order to enter the namespace.
But on the other hand, no complexity is added to our code.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Namely, virFileGetACLs, virFileSetACLs, virFileFreeACLs and
virFileCopyACLs. These functions are going to be required when we
are creating /dev for qemu. We have copy anything that's in
host's /dev exactly as is. Including ACLs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is just a code move of virstat.c to virnetdevtap.c

When redoing the website we deleted the libvirtLogo.png file
not remembering that the test driver screenshot API impl
relied on it.

Rather than having the test driver use the logo as a side
effect, give it its own dedicated image to use. This is
installed in /usr/share/libvirt/test-screenshot.png and
is taken from a NeXT Cube running WorldWideWeb[1]. The
very first web browser in existance, running on the
hardware it was originally written on.

[1] https://en.wikipedia.org/wiki/WorldWideWebSigned-off-by: NDaniel P. Berrange <berrange@redhat.com>

So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:

  # virsh start $dom && ssh $dom

In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This module will be used to track:

  <domain, mac address list>

pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests.  Provide the basic infrastructure
for these tasks.

The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>

Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Implement a new libssh transport, which uses libssh to communicate with
remote hosts, and add all the build system stuff (search of libssh,
private symbols, etc) to built it.

This new transport supports all the common ssh authentication methods,
making use of libvirt's auth callbacks for interaction with the user.

  vzDomainMigrateConfirm3Params is whitelisted. Otherwise we need to
move removing domain from domain list from perform to confirm
step. This would further imply adding a flag and check that migration
is in progress to prohibit mistakenly (maliciously) removing domains
on confirm step. vz version of p2p also need to be fixed to include confirm step.
One would also need to add means to cleanup pending migration
on client disconnect as now is has state across several API
calls.

  On the other hand current version of confirm step is totaly
harmless thus it is easier to whitelist it at the moment.
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: NMaxim Nestratov <mnestratov@virtuozzo.com>

When build for architecture that don't use gcc atomic ops but pthread,
it fails to build for armel:

| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virClassNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:153: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:205: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectUnref':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:277: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectRef':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:298: undefined reference to `virAtomicLock'
| collect2: error: ld returned 1 exit status

It is similar with:

http://libvirt.org/git/?p=libvirt.git;a=commit;h=12dc729Signed-off-by: NKai Kang <kai.kang@windriver.com>

The build was failing with:

  CCLD     lockd.la
libtool:   error: can't build i686-pc-cygwin shared library unless -no-undefined is specified

Rather than add yet another $(CYGWIN_EXTRA_LDFLAGS) to all the
impacted *_la_LDFLAGS, it was easier to just pull the extra
flags into ALL libraries via AM_LDFLAGS.

Then, fix lockd_la_LDFLAGS to include AM_LDFLAGS, like all other
libraries.
Signed-off-by: NEric Blake <eblake@redhat.com>

Without XDR_CFLAGS, compilation on Cygwin fails with:

  CC       libvirt_driver_la-libvirt-stream.lo
In file included from libvirt-stream.c:26:0:
rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
Signed-off-by: NEric Blake <eblake@redhat.com>

Add node device event handling infrastructure to node_device_event.[ch]

First, remove escaped newlines and split up the string into an argv-list for
the bhyve and loader commands, respectively. This is done by iterating over the
string splitting it by newlines, and then re-iterating over each line,
splitting it by spaces.

Since this code reuses part of the code of qemu_parse_command.c
(in bhyveCommandLine2argv), add the appropriate copyright notices.
Signed-off-by: NFabian Freyer <fabian.freyer@physik.tu-berlin.de>

Pretending (partial) support for something we don't understand is risky.
Reporting a failure is much better.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).

Both ARM and AArch64 drivers are exactly the same (modulo function
names). Let's use just one driver for all ARM architectures.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>