We can't call qemuCapsExtractVersionInfo() from test code, because it
expects to be able to call the emulator, and for testing we have fake
emulators that can't be executed. For that reason qemuxml2argvtest.c
doesn't call qemuDomainAssignPCIAddresses(), instead it open codes its
own version.

That means we can't call qemuDomainAssignAddresses() from the test code,
instead we need to manually call qemuDomainAssignSpaprVioAddresses().

Also add logic to cope with qemuDomainAssignSpaprVioAddresses() failing,
so that we can write a test that checks for a known failure in there.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Currently qemuDomainAssignPCIAddresses() is called to assign addresses
to PCI devices.

We need to do something similar for devices with spapr-vio addresses.
So create one place where address assignment will be done, that is
qemuDomainAssignAddresses().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

For the PPC64 pseries machine type we need to add address information
for the spapr-vty device.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

On the PPC64 pseries machine type we need to use the spapr-vscsi device
rather than an lsi.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

 assumptions from generic code.

This implements the minimal set of changes needed in libvirt to launch a
PowerPC-KVM based guest.
It removes x86-specific assumptions about choice of serial driver backend
from generic qemu guest commandline generation code.
It also restricts the ACPI capability to be available for an x86 or
x86_64 domain.
This is not a complete solution -- it still does not guarantee libvirt
the capability to flag non-supported options in guest XML. (Eg, an ACPI
specification in a PowerPC guest XML will still get processed, even
though qemu-system-ppc64 does not support it while qemu-system-x86_64 does.)
This drawback exists because libvirt falls back on qemu to query supported
features, and qemu '-h' blindly lists all capabilities -- irrespective
of whether they are available while emulating a given architecture or not.
The long-term solution would be for qemu to list out capabilities based
on architecture and platform -- so that libvirt can cleanly make out what
devices are supported on an arch (say 'ppc64') and platform (say, 'mac99').
Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>

In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns

  virNetDevMacVLanXXXXX     - macvlan/macvtap interface management
  virNetDevVPortProfileXXXX - virtual port profile management

* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_command.h,
  src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
  src/qemu/qemu_process.h: Update for renamed APIs

Remove the code that instantiates network filters on direct type
of interfaces. The parser already does not accept it.

The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: NSage Weil <sage@newdream.net>

This patch is rather cosmetic as it only moves device alias
assignation from command line construction just before that.
However, it is needed in connotation of previous and next patch.

- create a new "redirdev" element for this purpose

domain parsing and serialization code, qemu driver backend and
a couple of test

Expand the domain and the QEmu driver code
Adds a couple of tests

The model by default is piix3-uchi.

Example:
<controller type='usb' index='0' model='ich9-ehci'/>

To enable attaching to externally launched QEMU, we need
to be able to reverse engineer a guest XML config based
on the argv for a PID in /proc

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Add
  qemuParseCommandLinePid which extracts QEMU config from
  argv in /proc, given a PID number

When converting QEMU argv into a virDomainDefPtr, also extract
the pidfile, monitor character device config and the monitor
mode.

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: Extract
  pidfile & monitor config from QEMU argv
* src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c: Add extra
  params when calling qemuParseCommandLineString

Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.

Hot pluging/unpluging multi PCI device is not supported now. So the function
of hotplugged PCI device must be 0. When we hot unplug it, we should set release
all functions in the slot.

We will support multi function PCI device. So we should reserve all functions in
the slot if we want to reserve a slot.

Opening raw network devices with the intent of passing those fds to
qemu is worth an audit point.  This makes a multi-part audit: first,
we audit the device(s) that libvirt opens on behalf of the MAC address
of a to-be-created interface (which can independently succeed or
fail), then we audit whether qemu actually started the network device
with the same MAC (so searching backwards for successful audits with
the same MAC will show which fd(s) qemu is actually using).  Note that
it is possible for the fd to be successfully opened but no attempt
made to pass the fd to qemu (for example, because intermediate
nwfilter operations failed) - no interface start audit will occur in
that case; so the audit for a successful opened fd does not imply
rights given to qemu unless there is a followup audit about the
attempt to start a new interface.

Likewise, when a network device is hot-unplugged, there is only one
audit message about the MAC being discontinued; again, searching back
to the earlier device open audits will show which fds that qemu quits
using (and yes, I checked via /proc/<qemu-pid>/fd that qemu _does_
close out the fds associated with an interface on hot-unplug).  The
code would require much more refactoring to be able to definitively
state which device(s) were discontinued at that point, since we
currently don't record anywhere in the XML whether /dev/vhost-net was
opened for a given interface.

* src/qemu/qemu_audit.h (qemuAuditNetDevice): New prototype.
* src/qemu/qemu_audit.c (qemuAuditNetDevice): New function.
* src/qemu/qemu_command.h (qemuNetworkIfaceConnect)
(qemuPhysIfaceConnect, qemuOpenVhostNet): Adjust prototype.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect)
(qemuPhysIfaceConnect, qemuOpenVhostNet): Add audit points and
adjust parameters.
(qemuBuildCommandLine): Adjust caller.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.

* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Honor vhost
designations, similar to qemu_command code paths.
* src/qemu/qemu_command.h (qemuOpenVhostNet): New prototype.
* src/qemu/qemu_command.c (qemuOpenVhostNet): Export.

This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
  with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
  enum values have to fit into int

The new name complies more with the fact that it contains a set of
qemuCapsFlags.

Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match

* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
  domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
  all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
  all QEMU process startup/shutdown functions

qemu 0.13.0 (at least as built for Fedora 14, and also backported to
RHEL 6.0 qemu) supported an older syntax for a spicevmc channel; it's
not as flexible (it has an implicit name and hides the chardev
aspect), but now that we support spicevmc, we might as well target
both variants.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_DEVICE_SPICEVMC):
New flag.
* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Set it
correctly.
* src/qemu/qemu_command.h (qemuBuildVirtioSerialPortDevStr): Drop
declaration.
* src/qemu/qemu_command.c (qemuBuildVirtioSerialPortDevStr): Alter
signature, check flag.
(qemuBuildCommandLine): Adjust caller and check flag.
* tests/qemuhelptest.c (mymain): Update test.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.xml:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc-old.args:
Likewise.

Depending if the qemu binary supports multiple pci-busses, the device
options will contain "bus=pci" or "bus=pci.0".

Only x86_64 and i686 seem to have support for multiple PCI-busses. When
a guest of these architectures is started, set the
QEMUD_CMD_FLAG_PCI_MULTIBUS flag.
Signed-off-by: NNiels de Vos <ndevos@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=620363

When using -incoming stdio or -incoming exec:, qemu keeps the
stdin fd open long after the migration is complete.  Not to
mention that exec:cat is horribly inefficient, by doubling the
I/O and going through a popen interface in qemu.

The new -incoming fd: of qemu 0.12.0 closes the fd after using
it, and allows us to bypass an intermediary cat process for
less I/O.

* src/qemu/qemu_command.h (qemuBuildCommandLine): Add parameter.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Support
migration via fd: when possible.  Consolidate migration handling
into one spot, now that it is more complex.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Update caller.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.args: New file.
* tests/qemuxml2argvdata/qemuxml2argv-restore-v2-fd.xml: Likewise.

Support for this is included in qemu and seabios from upstream git.

This patch is in response to

  https://bugzilla.redhat.com/show_bug.cgi?id=643050

The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.

This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:

     <interface type="network">
       <model type="virtio"/>
       <driver name="vhost"/>

will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.

If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.

* src/conf/domain_conf.h (virDomainChrDeviceType): Drop monitor.
* src/conf/domain_conf.c (virDomainChrDevice)
(virDomainChrDefParseTargetXML, virDomainChrDefFormat): Drop
monitor support.
* src/qemu/qemu_command.h (qemuBuildCommandLine): Alter signature.
* src/qemu/qemu_monitor.h (qemuMonitorOpen): Likewise.
* src/qemu/qemu_domain.h (_qemuDomainObjPrivate): Change type of
monConfig.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateFree)
(qemuDomainObjPrivateXMLFormat, qemuDomainObjPrivateXMLParse):
Adjust to type change.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuPrepareMonitorChr)
(qemudStartVMDaemon, qemuDomainXMLToNative, qemuConnectMonitor)
(qemudShutdownVMDaemon): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorOpen): Likewise.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Likewise.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

Move the code for handling the QEMU virDomainObjPtr private
data, and custom XML namespace into a separate file

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: New file
  for private data & namespace code
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
  private data & namespace code
* src/qemu/qemu_driver.h, src/qemu/qemu_command.h: Update
  includes
* src/Makefile.am: Add src/qemu/qemu_domain.c

The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
  command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
  line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
  import of qemu_command.h

The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the capabilities code into its own file

* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h: New
  capabilities management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete capabilities
  code
* src/qemu/qemu_conf.h: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_capabilities.c

`dump' watchdog action lets libvirtd to dump the guest when receives a
watchdog event (which probably means a guest crash)

Currently only qemu is supported.

Commit febc5916 introduced -vga none in
case no video card is included in domain XML. However, old qemu
versions do not support this and such domain cannot be successfully
started.

* src/qemu/qemu_conf.c (qemudExtractVersionInfo): Check for file
before executing it here, rather than in callers.
(qemudBuildCommandLine): Rewrite with virCommand.
* src/qemu/qemu_conf.h (qemudBuildCommandLine): Update signature.
* src/qemu/qemu_driver.c (qemuAssignPCIAddresses)
(qemudStartVMDaemon, qemuDomainXMLToNative): Adjust callers.

This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.

https://bugzilla.redhat.com/show_bug.cgi?id=632750

For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.

I am also fixing a problem with the virsh domainxml-to-native call on the way.

Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.

The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.

In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address

* src/qemu/qemu.conf: Add spice_listen, spice_tls,
  spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
  spice config parameters and updating -spice arg generation
  to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
  tests/qemuxml2argvtest.c: Expand test case to cover driver
  level configuration

This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.

* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
  -spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
  for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag