提交 c2b38277 编写于 作者: S Stefan Berger

802.1Qbg: use pre-associate state at beginning of inc. migr

This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.

https://bugzilla.redhat.com/show_bug.cgi?id=632750

For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.

I am also fixing a problem with the virsh domainxml-to-native call on the way.

Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.

The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.
上级 d7e2b2b4
#
# macvtap.h
openMacvtapTap;
delMacvtap;
openMacvtapTap;
virVMOperationTypeFromString;
virVMOperationTypeToString;
vpAssociatePortProfileId;
vpDisassociatePortProfileId;
......@@ -1642,7 +1642,8 @@ qemudPhysIfaceConnect(virConnectPtr conn,
struct qemud_driver *driver,
virDomainNetDefPtr net,
unsigned long long qemuCmdFlags,
const unsigned char *vmuuid)
const unsigned char *vmuuid,
enum virVMOperationType vmop)
{
int rc;
#if WITH_MACVTAP
......@@ -1656,7 +1657,8 @@ qemudPhysIfaceConnect(virConnectPtr conn,
rc = openMacvtapTap(net->ifname, net->mac, net->data.direct.linkdev,
net->data.direct.mode, vnet_hdr, vmuuid,
&net->data.direct.virtPortProfile, &res_ifname);
&net->data.direct.virtPortProfile, &res_ifname,
vmop);
if (rc >= 0) {
VIR_FREE(net->ifname);
net->ifname = res_ifname;
......@@ -3953,7 +3955,8 @@ int qemudBuildCommandLine(virConnectPtr conn,
int **vmfds,
int *nvmfds,
const char *migrateFrom,
virDomainSnapshotObjPtr current_snapshot)
virDomainSnapshotObjPtr current_snapshot,
enum virVMOperationType vmop)
{
int i;
char memory[50];
......@@ -4796,7 +4799,8 @@ int qemudBuildCommandLine(virConnectPtr conn,
} else if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) {
int tapfd = qemudPhysIfaceConnect(conn, driver, net,
qemuCmdFlags,
def->uuid);
def->uuid,
vmop);
if (tapfd < 0)
goto error;
......
......@@ -40,6 +40,7 @@
# include "cpu_conf.h"
# include "driver.h"
# include "bitmap.h"
# include "macvtap.h"
# define qemudDebug(fmt, ...) do {} while(0)
......@@ -238,7 +239,8 @@ int qemudBuildCommandLine (virConnectPtr conn,
int **vmfds,
int *nvmfds,
const char *migrateFrom,
virDomainSnapshotObjPtr current_snapshot)
virDomainSnapshotObjPtr current_snapshot,
enum virVMOperationType vmop)
ATTRIBUTE_NONNULL(1);
/* With vlan == -1, use netdev syntax, else old hostnet */
......@@ -317,7 +319,8 @@ int qemudPhysIfaceConnect(virConnectPtr conn,
struct qemud_driver *driver,
virDomainNetDefPtr net,
unsigned long long qemuCmdFlags,
const unsigned char *vmuuid);
const unsigned char *vmuuid,
enum virVMOperationType vmop);
int qemudProbeMachineTypes (const char *binary,
virCapsGuestMachinePtr **machines,
......
......@@ -163,7 +163,8 @@ static int qemudStartVMDaemon(virConnectPtr conn,
const char *migrateFrom,
bool start_paused,
int stdin_fd,
const char *stdin_path);
const char *stdin_path,
enum virVMOperationType vmop);
static void qemudShutdownVMDaemon(struct qemud_driver *driver,
virDomainObjPtr vm,
......@@ -3864,7 +3865,8 @@ static int qemudStartVMDaemon(virConnectPtr conn,
const char *migrateFrom,
bool start_paused,
int stdin_fd,
const char *stdin_path) {
const char *stdin_path,
enum virVMOperationType vmop) {
const char **argv = NULL, **tmp;
const char **progenv = NULL;
int i, ret, runflags;
......@@ -4065,7 +4067,7 @@ static int qemudStartVMDaemon(virConnectPtr conn,
if (qemudBuildCommandLine(conn, driver, vm->def, priv->monConfig,
priv->monJSON, qemuCmdFlags, &argv, &progenv,
&vmfds, &nvmfds, migrateFrom,
vm->current_snapshot) < 0)
vm->current_snapshot, vmop) < 0)
goto cleanup;
if (qemuDomainSnapshotSetInactive(vm, driver->snapshotDir) < 0)
......@@ -4879,7 +4881,7 @@ static virDomainPtr qemudDomainCreate(virConnectPtr conn, const char *xml,
if (qemudStartVMDaemon(conn, driver, vm, NULL,
(flags & VIR_DOMAIN_START_PAUSED) != 0,
-1, NULL) < 0) {
-1, NULL, VIR_VM_OP_CREATE) < 0) {
qemuDomainStartAudit(vm, "booted", false);
if (qemuDomainObjEndJob(vm) > 0)
virDomainRemoveInactive(&driver->domains,
......@@ -7015,7 +7017,8 @@ qemudDomainSaveImageStartVM(virConnectPtr conn,
}
/* Set the migration source and start it up. */
ret = qemudStartVMDaemon(conn, driver, vm, "stdio", true, fd, path);
ret = qemudStartVMDaemon(conn, driver, vm, "stdio", true, fd, path,
VIR_VM_OP_RESTORE);
if (intermediate_pid != -1) {
/* Wait for intermediate process to exit */
......@@ -7334,14 +7337,15 @@ static char *qemuDomainXMLToNative(virConnectPtr conn,
if (!def)
goto cleanup;
/* Since we're just exporting args, we can't do bridge/network
* setups, since libvirt will normally create TAP devices
/* Since we're just exporting args, we can't do bridge/network/direct
* setups, since libvirt will normally create TAP/macvtap devices
* directly. We convert those configs into generic 'ethernet'
* config and assume the user has suitable 'ifup-qemu' scripts
*/
for (i = 0 ; i < def->nnets ; i++) {
virDomainNetDefPtr net = def->nets[i];
if (net->type == VIR_DOMAIN_NET_TYPE_NETWORK) {
if (net->type == VIR_DOMAIN_NET_TYPE_NETWORK ||
net->type == VIR_DOMAIN_NET_TYPE_DIRECT) {
VIR_FREE(net->data.network.name);
memset(net, 0, sizeof *net);
......@@ -7397,7 +7401,8 @@ static char *qemuDomainXMLToNative(virConnectPtr conn,
&monConfig, 0, qemuCmdFlags,
&retargv, &retenv,
NULL, NULL, /* Don't want it to create TAP devices */
NULL, NULL) < 0) {
NULL, NULL,
VIR_VM_OP_NO_OP) < 0) {
goto cleanup;
}
......@@ -7484,7 +7489,8 @@ static int qemudDomainObjStart(virConnectPtr conn,
goto cleanup;
}
ret = qemudStartVMDaemon(conn, driver, vm, NULL, start_paused, -1, NULL);
ret = qemudStartVMDaemon(conn, driver, vm, NULL, start_paused, -1, NULL,
VIR_VM_OP_CREATE);
qemuDomainStartAudit(vm, "booted", ret >= 0);
if (ret >= 0) {
virDomainEventPtr event =
......@@ -8327,7 +8333,8 @@ static int qemudDomainAttachNetDevice(virConnectPtr conn,
if ((tapfd = qemudPhysIfaceConnect(conn, driver, net,
qemuCmdFlags,
vm->def->uuid)) < 0)
vm->def->uuid,
VIR_VM_OP_CREATE)) < 0)
return -1;
}
......@@ -11001,7 +11008,7 @@ qemudDomainMigratePrepareTunnel(virConnectPtr dconn,
* -incoming unix:/path/to/file or exec:nc -U /path/to/file
*/
internalret = qemudStartVMDaemon(dconn, driver, vm, migrateFrom, true,
-1, NULL);
-1, NULL, VIR_VM_OP_MIGRATE_IN_START);
VIR_FREE(migrateFrom);
if (internalret < 0) {
qemuDomainStartAudit(vm, "migrated", false);
......@@ -11247,7 +11254,7 @@ qemudDomainMigratePrepare2 (virConnectPtr dconn,
*/
snprintf (migrateFrom, sizeof (migrateFrom), "tcp:0.0.0.0:%d", this_port);
if (qemudStartVMDaemon (dconn, driver, vm, migrateFrom, true,
-1, NULL) < 0) {
-1, NULL, VIR_VM_OP_MIGRATE_IN_START) < 0) {
qemuDomainStartAudit(vm, "migrated", false);
/* Note that we don't set an error here because qemudStartVMDaemon
* should have already done that.
......@@ -11862,6 +11869,41 @@ cleanup:
return ret;
}
static void
qemudVPAssociatePortProfiles(virDomainDefPtr def) {
int i;
int last_good_net = -1;
virDomainNetDefPtr net;
for (i = 0; i < def->nnets; i++) {
net = def->nets[i];
if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) {
if (vpAssociatePortProfileId(net->ifname,
net->mac,
net->data.direct.linkdev,
&net->data.direct.virtPortProfile,
def->uuid,
VIR_VM_OP_MIGRATE_IN_FINISH) != 0)
goto err_exit;
}
last_good_net = i;
}
return;
err_exit:
for (i = 0; i < last_good_net; i++) {
net = def->nets[i];
if (net->type == VIR_DOMAIN_NET_TYPE_DIRECT) {
vpDisassociatePortProfileId(net->ifname,
net->mac,
net->data.direct.linkdev,
&net->data.direct.virtPortProfile,
VIR_VM_OP_MIGRATE_IN_FINISH);
}
}
}
/* Finish is the third and final step, and it runs on the destination host. */
static virDomainPtr
qemudDomainMigrateFinish2 (virConnectPtr dconn,
......@@ -11922,6 +11964,8 @@ qemudDomainMigrateFinish2 (virConnectPtr dconn,
goto cleanup;
}
qemudVPAssociatePortProfiles(vm->def);
if (flags & VIR_MIGRATE_PERSIST_DEST) {
if (vm->persistent)
newVM = 0;
......@@ -12814,7 +12858,7 @@ static int qemuDomainRevertToSnapshot(virDomainSnapshotPtr snapshot,
goto endjob;
rc = qemudStartVMDaemon(snapshot->domain->conn, driver, vm, NULL,
false, -1, NULL);
false, -1, NULL, VIR_VM_OP_CREATE);
qemuDomainStartAudit(vm, "from-snapshot", rc >= 0);
if (qemuDomainSnapshotSetInactive(vm, driver->snapshotDir) < 0)
goto endjob;
......
......@@ -77,9 +77,21 @@
# define LLDPAD_PID_FILE "/var/run/lldpad.pid"
VIR_ENUM_IMPL(virVMOperation, VIR_VM_OP_LAST,
"create",
"save",
"restore",
"destroy",
"migrate out",
"migrate in start",
"migrate in finish",
"no-op")
enum virVirtualPortOp {
ASSOCIATE = 0x1,
DISASSOCIATE = 0x2,
PREASSOCIATE = 0x3,
};
......@@ -551,7 +563,8 @@ openMacvtapTap(const char *tgifname,
int vnet_hdr,
const unsigned char *vmuuid,
virVirtualPortProfileParamsPtr virtPortProfile,
char **res_ifname)
char **res_ifname,
enum virVMOperationType vmOp)
{
const char *type = "macvtap";
int c, rc;
......@@ -563,6 +576,8 @@ openMacvtapTap(const char *tgifname,
*res_ifname = NULL;
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
if (tgifname) {
if(ifaceGetIndex(false, tgifname, &ifindex) == 0) {
if (STRPREFIX(tgifname,
......@@ -601,7 +616,7 @@ create_name:
macaddress,
linkdev,
virtPortProfile,
vmuuid) != 0) {
vmuuid, vmOp) != 0) {
rc = -1;
goto link_del_exit;
}
......@@ -634,7 +649,8 @@ disassociate_exit:
vpDisassociatePortProfileId(cr_ifname,
macaddress,
linkdev,
virtPortProfile);
virtPortProfile,
vmOp);
link_del_exit:
link_del(cr_ifname);
......@@ -662,7 +678,8 @@ delMacvtap(const char *ifname,
if (ifname) {
vpDisassociatePortProfileId(ifname, macaddr,
linkdev,
virtPortProfile);
virtPortProfile,
VIR_VM_OP_DESTROY);
link_del(ifname);
}
}
......@@ -1320,6 +1337,9 @@ doPortProfileOp8021Qbg(const char *ifname,
portVsi.vsi_type_id[0] = virtPort->u.virtPort8021Qbg.typeID;
switch (virtPortOp) {
case PREASSOCIATE:
op = PORT_REQUEST_PREASSOCIATE;
break;
case ASSOCIATE:
op = PORT_REQUEST_ASSOCIATE;
break;
......@@ -1484,6 +1504,7 @@ err_exit:
* @macvtap_ifname: The name of the macvtap device
* @virtPort: pointer to the object holding port profile parameters
* @vmuuid : the UUID of the virtual machine
* @vmOp : The VM operation (i.e., create, no-op)
*
* Associate a port on a swtich with a profile. This function
* may notify a kernel driver or an external daemon to run
......@@ -1499,13 +1520,19 @@ vpAssociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort,
const unsigned char *vmuuid)
const unsigned char *vmuuid,
enum virVMOperationType vmOp)
{
int rc = 0;
VIR_DEBUG("Associating port profile '%p' on link device '%s'",
virtPort, macvtap_ifname);
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
if (vmOp == VIR_VM_OP_NO_OP)
return 0;
switch (virtPort->virtPortType) {
case VIR_VIRTUALPORT_NONE:
case VIR_VIRTUALPORT_TYPE_LAST:
......@@ -1513,10 +1540,16 @@ vpAssociatePortProfileId(const char *macvtap_ifname,
case VIR_VIRTUALPORT_8021QBG:
rc = doPortProfileOp8021Qbg(macvtap_ifname, macvtap_macaddr,
virtPort, ASSOCIATE);
virtPort,
(vmOp == VIR_VM_OP_MIGRATE_IN_START)
? PREASSOCIATE
: ASSOCIATE);
break;
case VIR_VIRTUALPORT_8021QBH:
/* avoid associating twice */
if (vmOp == VIR_VM_OP_MIGRATE_IN_FINISH)
break;
rc = doPortProfileOp8021Qbh(linkdev, virtPort,
vmuuid,
ASSOCIATE);
......@@ -1542,13 +1575,16 @@ int
vpDisassociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort)
const virVirtualPortProfileParamsPtr virtPort,
enum virVMOperationType vmOp)
{
int rc = 0;
VIR_DEBUG("Disassociating port profile id '%p' on link device '%s' ",
virtPort, macvtap_ifname);
VIR_DEBUG("%s: VM OPERATION: %s", __FUNCTION__, virVMOperationTypeToString(vmOp));
switch (virtPort->virtPortType) {
case VIR_VIRTUALPORT_NONE:
case VIR_VIRTUALPORT_TYPE_LAST:
......@@ -1560,6 +1596,9 @@ vpDisassociatePortProfileId(const char *macvtap_ifname,
break;
case VIR_VIRTUALPORT_8021QBH:
/* avoid disassociating twice */
if (vmOp == VIR_VM_OP_MIGRATE_IN_FINISH)
break;
rc = doPortProfileOp8021Qbh(linkdev, virtPort,
NULL,
DISASSOCIATE);
......
......@@ -62,6 +62,19 @@ struct _virVirtualPortProfileParams {
# include "internal.h"
enum virVMOperationType {
VIR_VM_OP_CREATE,
VIR_VM_OP_SAVE,
VIR_VM_OP_RESTORE,
VIR_VM_OP_DESTROY,
VIR_VM_OP_MIGRATE_OUT,
VIR_VM_OP_MIGRATE_IN_START,
VIR_VM_OP_MIGRATE_IN_FINISH,
VIR_VM_OP_NO_OP,
VIR_VM_OP_LAST
};
int openMacvtapTap(const char *ifname,
const unsigned char *macaddress,
const char *linkdev,
......@@ -69,7 +82,8 @@ int openMacvtapTap(const char *ifname,
int vnet_hdr,
const unsigned char *vmuuid,
virVirtualPortProfileParamsPtr virtPortProfile,
char **res_ifname);
char **res_ifname,
enum virVMOperationType vmop);
void delMacvtap(const char *ifname,
const unsigned char *macaddress,
......@@ -86,13 +100,16 @@ int vpAssociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort,
const unsigned char *vmuuid);
const unsigned char *vmuuid,
enum virVMOperationType vmOp);
int vpDisassociatePortProfileId(const char *macvtap_ifname,
const unsigned char *macvtap_macaddr,
const char *linkdev,
const virVirtualPortProfileParamsPtr virtPort);
const virVirtualPortProfileParamsPtr virtPort,
enum virVMOperationType vmOp);
VIR_ENUM_DECL(virVirtualPort)
VIR_ENUM_DECL(virVMOperation)
#endif /* __UTIL_MACVTAP_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册