Now that all the changes have been implemented we can run the
test cases once again, after updating them to reflect the new
behaviour.

The upcoming commits will make heavy modifications to the ppc64
driver, split so that it's easier to review the changes.

Instead of updating the test cases so that they pass, possibly
only to update them again with the following commit, disable them
for the time being.

Another commit will update them all in one go once all required
changes are in place.

Limitations of the POWER architecture mean that you can't run
eg. a POWER7 guest on a POWER8 host when using KVM. This applies
to all guests, not just those using VIR_CPU_MATCH_STRICT in the
CPU definition; in fact, exact and strict CPU matching are
basically the same on ppc64.

This means, of course, that hosts using different CPUs have to be
considered incompatible as well.

Change ppc64Compute(), called by cpuGuestData(), to reflect this
fact and update test cases accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977

A test is considered successful if the obtained result matches
the expected result: if that's not the case, whether because a
test that was expected to succeed failed or because a test that
was supposed to fail succeeded, then something's not right and
we want the user to know about this.

On the other hand, if a failure that's unrelated to the bits
we're testing occurs, then the user should be notified even if
the test was expected to fail.

Use different values to tell these two situations apart.

Fix a test case that was wrongly expected to fail as well.

No functional changes.

This patch modifies virSocketAddrGetRange() to function properly when
the containing network/prefix of the address range isn't known, for
example in the case of the NAT range of a virtual network (since it is
a range of addresses on the *host*, not within the network itself). We
then take advantage of this new functionality to validate the NAT
range of a virtual network.

Extra test cases are also added to verify that virSocketAddrGetRange()
works properly in both positive and negative cases when the network
pointer is NULL.

This is the *real* fix for:

https://bugzilla.redhat.com/show_bug.cgi?id=985653

Commits 1e334a and 48e8b9 had earlier been pushed as fixes for that
bug, but I had neglected to read the report carefully, so instead of
fixing validation for the NAT range, I had fixed validation for the
DHCP range. sigh.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150484Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This will be used with a virtio-scsi controller later on.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since its introduction in 2011 (particularly in commit f4324e32),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This is backed by the qemu device xio3130-downstream. It can only be
connected to a pcie-switch-upstream-port (x3130-upstream) on the
upstream side.

This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).

The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.

This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.

this is backed by the qemu device x3130-upstream. It can only plug
into a pcie-root-port or pcie-switch-downstream-port.

This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.

This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.

This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.

This is backed by the qemu device ioh3420.

chassis and port from the <target> subelement are used to store/set the
respective qemu device options for the ioh3420. Currently, chassis is
set to be the index of the controller, and port is set to
"(slot << 3) + function" (per suggestion from Alex Williamson).

This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.

New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.

This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.

This device will be used to implement the "pcie-root-port" model of
pci controller.

This uses the new subelement/attribute in two ways:

1) If a "pci-bridge" pci controller has no chassisNr attribute, it
will automatically be set to the controller's index as soon as the
controller's PCI address is known (during
qemuDomainAssignPCIAddresses()).

2) when creating the commandline for a pci-bridge device, chassisNr
will be used to set qemu's chassis_nr option (rather than the previous
practice of hard-coding it to the controller's index).

There are some configuration options to some types of pci controllers
that are currently automatically derived from other parts of the
controller's configuration. For example, in qemu a pci-bridge
controller has an option that is called "chassis_nr"; up until now
libvirt has always set chassis_nr to the index of the pci-bridge. So
this:

  <controller type='pci' model='pci-bridge' index='2'/>

will always result in:

  -device pci-bridge,chassis_nr=2,...

on the qemu commandline. In the future we may decide there is a better
way to derive that option, but even in that case we will need for
existing domains to retain the same chassis_nr they were using in the
past - that is something that is visible to the guest so it is part of
the guest ABI and changing it would lead to problems for migrating
guests (or just guests with very picky OSes).

The <target> subelement has been added as a place to put the new
"chassisNr" attribute that will be filled in by libvirt when it
auto-generates the chassisNr; it will be saved in the config, then
reused any time the domain is started:

  <controller type='pci' model='pci-bridge' index='2'>
    <model type='pci-bridge'/>
    <target chassisNr='2'/>
  </controller>

The one oddity of all this is that if the controller configuration
is changed (for example to change the index or the pci address
where the controller is plugged in), the items in <target> will
*not* be re-generated, which might lead to conflict. I can't
really see any way around this, but fortunately if there is a
material conflict qemu will let us know and we will pass that on
to the user.

This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:

  <controller type='pci' model='dmi-to-pci-bridge' index='1'>
    <model name='i82801b11-bridge'/>
  </controller>

In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".

Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.

(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)

If a pci address had a function number out of range, the error message
would be:

  Insufficient specification for PCI address

which is logged by virDevicePCIAddressParseXML() after
virDevicePCIAddressIsValid returns a failure.

This patch enhances virDevicePCIAddressIsValid() to optionally report
the error itself (since it is the place that decides which part of the
address is "invalid"), and uses that feature when calling from
virDevicePCIAddressParseXML(), so that the error will be more useful,
e.g.:

  Invalid PCI address function=0x8, must be <= 7

Previously, virDevicePCIAddressIsValid didn't check for the
theoretical limits of domain or bus, only for slot or function. While
adding log messages, we also correct that ommission. (The RNG for PCI
addresses already enforces this limit, which by the way means that we
can't add any negative tests for this - as far as I know our
domainschematest has no provisions for passing XML that is supposed to
fail).

Note that virDevicePCIAddressIsValid() can only check against the
absolute maximum attribute values for *any* possible PCI controller,
not for the actual maximums of the specific controller that this
device is attaching to; fortunately there is later more specific
validation for guest-side PCI addresses when building the set of
assigned PCI addresses. For host-side PCI addresses (e.g. for
<hostdev> and for network device pools), we rely on the error that
will be logged when it is found that the device doesn't actually
exist.

This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=1004596

In gnutls 3.4.3 there is a regression in the loading of private
keys via gnutls_x509_privkey_import. We already have a workaround
to deal with failures on older gnutls, but the error code that
the new gnutls returns is different. Extend the workaround so that
is checks for GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE too.

See also gnutls https://bugzilla.redhat.com/show_bug.cgi?id=1250020Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.
Signed-off-by: NKothapally Madhu Pavan <kmp@linux.vnet.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1180486Signed-off-by: NJán Tomko <jtomko@redhat.com>

This makes sure the subcore-unaware CPU counting logic is used
whenever the configuration is invalid.

This makes sure CPUs are counted correctly when some of the cores are
completely offline.

This makes sure CPUs are counted correctly when using the default
configuration, that is, all primary threads are online and all
secondary threads are offline.

The nodeGetThreadsPerSubcore() function is mocked to return 8 for
ppc64 tests, which corresponds to the default subcore mode.

Update the expected output for the deconfigured-cpus nodeinfo
test to account for this change.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Commit 2094d01e forgot to rename two
more files.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Simplest was just to rename that extra long name and move files in git
accordingly

Add a testcase for the previous change to ensure zero capacity volumes can be
defined without a backing store.
Signed-off-by: NChris J Arges <chris.j.arges@canonical.com>

This reverts commit 7b401c3b.

Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

As there is a regression in use vcpupin get info, introduce a new function
to test the virsh client.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Bhyve as of r279225 (FreeBSD -CURRENT) or r284894 (FreeBSD 10-STABLE)
supports using UTC time offset via the '-u' argument to bhyve(8). By
default it's still using localtime.

Make the bhyve driver use UTC clock if it's requested by specifying
<clock offset='utc'> in domain XML and if the bhyve(8) binary supports
the '-u' flag.

When cleaning up the data (taken from a running system) for inclusion
I went a little too far and deleted a bunch of links that should have
been left alone. The test worked despite this because it was going
through a fallback code path.

A few other files are affected as well: again, the data is taken from
a running system, so even thought we would probably be okay if we
just added the links, aligning everything is definitely safer.

The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.

This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.

The error is exposed by the following log entry:

debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'

for a "/machine/test" resource and "testvm" vm.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570

Adding functionality to libvirt that will allow
it query the interface for the availability of RDMA and
tx-udp_tnl-segmentation Offloading NIC capabilities

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <feature name='rdma'/>
    <feature name='txudptnl'/>
    <capability type='80203'/>
  </capability>
</device>

Allows to specify maximum number of head to QXL driver.

Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.
Signed-off-by: NFrediano Ziglio <fziglio@redhat.com>

This patch adds a test for the qemu command line generation.
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: NJason J. Herne <jjherne@us.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>

Make sure sysfs_prefix, when present, is always the first argument
to a function; don't use a different name to refer to it; check
whether it is NULL, and hence SYSFS_SYSTEM_PATH should be used, only
when using it directly and not just passing it down to another
function; always pass down the same value we've been passed when
calling another function.