- 13 3月, 2014 2 次提交
-
-
由 Chunyan Liu 提交于
-
由 Chunyan Liu 提交于
-
- 12 3月, 2014 1 次提交
-
-
由 Ján Tomko 提交于
Open-coding one VIR_FREE in the test suite just doesn't seem right.
-
- 11 3月, 2014 2 次提交
-
-
由 Daniel P. Berrange 提交于
The future QEMU capabilities cache needs to be able to invalidate itself if the libvirtd binary or any loadable modules are changed on disk. Record the 'ctime' value for these binaries and provide helper APIs to query it. This approach assumes that if libvirt.so is changed, then libvirtd will also change, which should usually be the case with libtool's wrapper scripts that cause libvirtd to get re-linked Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
GNULIB provides APIs for calculating md5 and sha256 hashes, but these APIs only return you raw byte arrays. Most users in libvirt want the hash in printable string format. Add some helper APIs in util/vircrypto.{c,h} for doing this. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 04 3月, 2014 3 次提交
-
-
由 Chunyan Liu 提交于
Signed-off-by: NChunyan Liu <cyliu@suse.com>
-
由 Eric Blake 提交于
Auditing all callers of virCommandRun and virCommandWait that passed a non-NULL pointer for exit status turned up some interesting observations. Many callers were merely passing a pointer to avoid the overall command dying, but without caring what the exit status was - but these callers would be better off treating a child death by signal as an abnormal exit. Other callers were actually acting on the status, but not all of them remembered to filter by WIFEXITED and convert with WEXITSTATUS; depending on the platform, this can result in a status being reported as 256 times too big. And among those that correctly parse the output, it gets rather verbose. Finally, there were the callers that explicitly checked that the status was 0, and gave their own message, but with fewer details than what virCommand gives for free. So the best idea is to move the complexity out of callers and into virCommand - by default, we return the actual exit status already cleaned through WEXITSTATUS and treat signals as a failed command; but the few callers that care can ask for raw status and act on it themselves. * src/util/vircommand.h (virCommandRawStatus): New prototype. * src/libvirt_private.syms (util/command.h): Export it. * docs/internals/command.html.in: Document it. * src/util/vircommand.c (virCommandRawStatus): New function. (virCommandWait): Adjust semantics. * tests/commandtest.c (test1): Test it. * daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers. * src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck): Likewise. * src/fdstream.c (virFDStreamCloseInt): Likewise. * src/lxc/lxc_process.c (virLXCProcessStart): Likewise. * src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper): Likewise. * src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify. * tests/reconnect.c (mymain): Likewise. * tests/statstest.c (mymain): Likewise. * src/bhyve/bhyve_process.c (virBhyveProcessStart) (virBhyveProcessStop): Don't overwrite virCommand error. * src/libvirt.c (virConnectAuthGainPolkit): Likewise. * src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit) (openvzDomainSetBarrierLimit): Likewise. * src/util/virebtables.c (virEbTablesOnceInit): Likewise. * src/util/viriptables.c (virIpTablesOnceInit): Likewise. * src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug message. * src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment. * src/storage/storage_backend_iscsi.c (virStorageBackendISCSINodeUpdate): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Thanks to namespaces, we have a couple of places in the code base that want to reflect a child exit status, including the ability to detect death by a signal, back to a grandparent. Best to make it a reusable function. * src/util/virprocess.h (virProcessExitWithStatus): New prototype. * src/libvirt_private.syms (util/virprocess.h): Export it. * src/util/virprocess.c (virProcessExitWithStatus): New function. * tests/commandtest.c (test23): Test it. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 25 2月, 2014 1 次提交
-
-
由 Laine Stump 提交于
We will need to call virDomainNetDefFormat() from the network hook (in the network driver).
-
- 24 2月, 2014 4 次提交
-
-
由 Richard Weinberger 提交于
This function is needed for user namespaces, where we need to chmod() the cgroup to the initial uid/gid such that systemd is allowed to use the cgroup. Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add a virStringReplace method to virstring.{h,c} to perform substring matching and replacement Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Manuel VIVES 提交于
Add a virStringSearch method to virstring.{c,h} which performs a regex match against a string and returns the matching substrings. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Michal Privoznik 提交于
Systemd does not forget about the cases, where client service needs to wait for daemon service to initialize and start accepting new clients. Setting a dependency in client is not enough as systemd doesn't know when the daemon has initialized itself and started accepting new clients. However, it offers a mechanism to solve this. The daemon needs to call a special systemd function by which the daemon tells "I'm ready to accept new clients". This is exactly what we need with libvirtd-guests (client) and libvirtd (daemon). So now, with this change, libvirt-guests.service is invoked not any sooner than libvirtd.service calls the systemd notify function. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 20 2月, 2014 4 次提交
-
-
由 Daniel P. Berrange 提交于
The virDomainGetRootFilesystem method can be generalized to allow any filesystem path to be obtained. While doing this, start a new test case for purpose of testing various helper methods in the domain_conf.{c,h} files, such as this one. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Thorsten Behrens 提交于
-
由 Thorsten Behrens 提交于
To reuse this from other drivers, like lxc.
-
由 Thorsten Behrens 提交于
This reads blkio stats from blkio.throttle.io_service_bytes and blkio.throttle.io_serviced.
-
- 19 2月, 2014 1 次提交
-
-
由 Li Zhang 提交于
Use it for the default mouse. Signed-off-by: NLi Zhang <zhlcindy@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
- 18 2月, 2014 4 次提交
-
-
由 Michal Privoznik 提交于
Basically, the idea is copied from domain code, where tainting exists for a while. Currently, only one taint reason exists - VIR_NETWORK_TAINT_HOOK to mark those networks which caused invoking of hook script. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
In the next patch I'm going to need the network format function that takes virBuffer as argument. However, slightly change of name is more appropriate then: virNetworkDefFormatBuf to match the rest of functions that format an object to buffer. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Daniel P. Berrange 提交于
Implement virProcessRunInMountNamespace, which runs callback of type virProcessNamespaceCallback in a container namespace. This uses a child process to run the callback, since you can't change the mount namespace of a thread. This implies that callbacks have to be careful about what code they run due to async safety rules. Idea by Dan Berrange, based on an initial report by Reco <recoverym4n@gmail.com> at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394Signed-off-by: NDaniel Berrange <berrange@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Daniel P. Berrange 提交于
Add a helper function which takes a file path and ensures that all directory components leading up to the file exist. IOW, it strips the filename part of the path and passes the result to virFileMakePath. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 14 2月, 2014 2 次提交
-
-
由 Peter Krempa 提交于
All the data for getting the actual type is present in the snapshot config. There is no need to have this function private to the qemu driver and it will be re-used later in other parts of libvirt
-
由 Peter Krempa 提交于
All the data for getting the actual type is present in the domain config. There is no need to have this function private to the qemu driver and it will be re-used later in other parts of libvirt
-
- 13 2月, 2014 1 次提交
-
-
由 Cédric Bosdonnat 提交于
virConf now honours a VIR_CONF_FLAG_LXC_FORMAT flag to handle LXC configuration files. The differences are that property names can contain '.' character and values are all strings without any bounding quotes. Provide a new virConfWalk function calling a handler on all non-comment values. This function will be used by the LXC conversion code to loop over LXC configuration lines.
-
- 07 2月, 2014 1 次提交
-
-
由 Matthieu Coudron 提交于
This commit allows to attach/detach a <filesystem> device in qemu. For this purpose I'm introducing two new functions: virDomainFSInsert() and virDomainFSRemove() and adding necessary code in the qemu driver. It compares filesystems based on their "destination" folder. So if two filesystems share the same destination, they are considered equal and the qemu driver would reject the insertion. Signed-off-by: NMatthieu Coudron <mattator@gmail.com>
-
- 04 2月, 2014 1 次提交
-
-
由 John Ferlan 提交于
virKModConfig() - Return a buffer containing kernel module configuration virKModLoad() - Load a specific module into the kernel configuration virKModUnload() - Unload a specific module from the kernel configuration virKModIsBlacklisted() - Determine whether a module is blacklisted within the kernel configuration
-
- 31 1月, 2014 2 次提交
-
-
由 Daniel P. Berrange 提交于
The NWFilter code has as a deadlock race condition between the virNWFilter{Define,Undefine} APIs and starting of guest VMs due to mis-matched lock ordering. In the virNWFilter{Define,Undefine} codepaths the lock ordering is 1. nwfilter driver lock 2. virt driver lock 3. nwfilter update lock 4. domain object lock In the VM guest startup paths the lock ordering is 1. virt driver lock 2. domain object lock 3. nwfilter update lock As can be seen the domain object and nwfilter update locks are not acquired in a consistent order. The fix used is to push the nwfilter update lock upto the top level resulting in a lock ordering for virNWFilter{Define,Undefine} of 1. nwfilter driver lock 2. nwfilter update lock 3. virt driver lock 4. domain object lock and VM start using 1. nwfilter update lock 2. virt driver lock 3. domain object lock This has the effect of serializing VM startup once again, even if no nwfilters are applied to the guest. There is also the possibility of deadlock due to a call graph loop via virNWFilterInstantiate and virNWFilterInstantiateFilterLate. These two problems mean the lock must be turned into a read/write lock instead of a plain mutex at the same time. The lock is used to serialize changes to the "driver->nwfilters" hash, so the write lock only needs to be held by the define/undefine methods. All other methods can rely on a read lock which allows good concurrency. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Add virRWLock backed up by a POSIX rwlock primitive Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 30 1月, 2014 3 次提交
-
-
由 Osier Yang 提交于
It doesn't make sense to fail if the SCSI host device is specified as "shareable" explicitly between domains (NB, it works if and only if the device is specified as "shareable" for *all* domains, otherwise it fails). To fix the problem, this patch introduces an array for virSCSIDevice struct, which records all the names of domain which are using the device (note that the recorded domains must specify the device as shareable). And the change on the data struct brings on many subsequent changes in the code. Prior to this patch, the "shareable" tag didn't work as expected, it actually work like "non-shareable". So this patch also added notes in formatdomain.html to declare the fact. * src/util/virscsi.h: - Remove virSCSIDeviceGetUsedBy - Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel - Add virSCSIDeviceIsAvailable * src/util/virscsi.c: - struct virSCSIDevice: Change "used_by" to be an array; Add "n_used_by" as the array count - virSCSIDeviceGetUsedBy: Removed - virSCSIDeviceFree: frees the "used_by" array - virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential memory corruption - virSCSIDeviceIsAvailable: New - virSCSIDeviceListDel: Change the logic, for device which is already in the list, just remove the corresponding entry in "used_by". And since it's only used in one place, we can safely removing the code to find out the dev in the list first. - Copyright updating * src/libvirt_private.sys: - virSCSIDeviceGetUsedBy: Remove - virSCSIDeviceIsAvailable: New * src/qemu/qemu_hostdev.c: - qemuUpdateActiveScsiHostdevs: Check if the device existing before adding it to the list; - qemuPrepareHostdevSCSIDevices: Error out if the not all domains use the device as "shareable"; Also don't try to add the device to the activeScsiHostdevs list if it already there; And make more sensible error w.r.t the current "shareable" value in driver->activeScsiHostdevs. - qemuDomainReAttachHostScsiDevices: Change the logic according to the changes on helpers. Signed-off-by: NOsier Yang <jyang@redhat.com>
-
由 Michal Privoznik 提交于
This reverts commit 2996e6be and some parts of 2636dc8c. The former one tried to implement QoS setting on bridgeless networks. However, as discussed upstream [1], the patch is far away from being useful in even a single case. The whole idea of network QoS is to have aggregated limits over several interfaces. This patch is doing completely the opposite when merging two QoS settings (from the network and the domain interface) into one which is then set at the domain interface itself, not the network. The latter one is the test for the previous one. Now none of them makes sense. 1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html Conflicts: tests/virnetdevbandwidthtest.c: New test has been introduced since then.
-
由 Michal Privoznik 提交于
There are some units within libvirt that utilize virCommand API to run some commands and deserve own unit testing. These units are, however, not desired to be rewritten to dig virCommand API usage out. As a great example virNetDevBandwidth could be used. The problem with the bandwidth unit is: it uses virCommand API heavily. Therefore we need a mechanism to not really run a command, but rather see its string representation after which we can decide if the unit construct the correct sequence of commands or not. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 27 1月, 2014 1 次提交
-
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1055484 Currently, libvirt's XML schema of network allows QoS to be defined for every network even though it has no bridge. For instance: <network> <name>vdsm-no-bridge</name> <forward mode='passthrough'> <interface dev='em1.10'/> </forward> <bandwidth> <inbound average='1000' peak='5000' burst='1024'/> <outbound average='1000' burst='1024'/> </bandwidth> </network> The bandwidth limitations can be, however, applied even on such networks. In fact, they are going to be applied on the interface that will be connected to the network on a domain startup. This approach, however, has one limitation. With bridged networks, there are two points where QoS can be set: bridge and domain interface. The lower limit of the two is enforced then. For instance, if the interface has 10Mbps average, but the network only 1Mbps, there's no way for interface to transmit packets faster than the 1Mbps limit. With two points this is enforced by kernel. With only one point, we must combine both QoS settings into one which is set afterwards. Look at virNetDevBandwidthMinimal() and you'll understand immediately what I mean. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 23 1月, 2014 1 次提交
-
-
由 Osier Yang 提交于
Unlike the host devices of other types, SCSI host device XML supports "shareable" tag. This patch introduces it for the virSCSIDevice struct for a later patch use (to detect if the SCSI device is shareable when preparing the SCSI host device in QEMU driver).
-
- 21 1月, 2014 1 次提交
-
-
由 Francesco Romani 提交于
spice-server offers an API to disable file transfer messages on the agent channel between the client and the guest. This is supported in qemu through the disable-agent-file-xfer option. This patch exposes this option to libvirt. Adds a new element 'filetransfer', with one property, 'enable', which accepts a boolean. Default is enabled, for backward compatibility. Depends on the capability exported in the first patch of the series. Signed-off-by: NFrancesco Romani <fromani@redhat.com>
-
- 20 1月, 2014 2 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Gao feng 提交于
This patch introduces virCgroupSetBlkioDeviceReadIops, virCgroupSetBlkioDeviceWriteIops, virCgroupSetBlkioDeviceReadBps and virCgroupSetBlkioDeviceWriteBps, we can use these interfaces to set up throttle blkio cgroup for domain. This patch also adds the new throttle blkio cgroup elements to the test xml. Signed-off-by: NGuan Qiang <hzguanqiang@corp.netease.com> Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
-
- 16 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
In order to mirror a server with per-object filtering, the client needs to track which server callbackID is servicing the client callback. This patch introduces the notion of a serverID, as well as the plumbing to use it for network events, although the actual complexity of using per-object filtering in the remote driver is deferred to a later patch. * src/conf/object_event.h (virObjectEventStateEventID): Add parameter. (virObjectEventStateQueueRemote, virObjectEventStateSetRemote): New prototypes. (virObjectEventStateRegisterID): Move... * src/conf/object_event_private.h: ...here, and add parameter. (_virObjectEvent): Add field. * src/conf/network_event.h (virNetworkEventStateRegisterClient): New prototype. * src/conf/object_event.c (_virObjectEventCallback): Add field. (virObjectEventStateSetRemote): New function. (virObjectEventStateQueue): Make wrapper around... (virObjectEventStateQueueRemote): New function. (virObjectEventCallbackListCount): Tweak return count when remote id matching is used. (virObjectEventCallbackLookup, virObjectEventStateRegisterID): Tweak registration when remote id matching will be used. (virObjectEventNew): Default to no remote id. (virObjectEventCallbackListAddID): Likewise, but set remote id when one is available. (virObjectEventCallbackListRemoveID) (virObjectEventCallbackListMarkDeleteID): Adjust return value when remote id was set. (virObjectEventStateEventID): Query existing id. (virObjectEventDispatchMatchCallback): Require matching event id. (virObjectEventStateCallbackID): Adjust caller. * src/conf/network_event.c (virNetworkEventStateRegisterClient): New function. (virNetworkEventStateRegisterID): Update caller. * src/conf/domain_event.c (virDomainEventStateRegister) (virDomainEventStateRegisterID): Update callers. * src/remote/remote_driver.c (remoteConnectNetworkEventRegisterAny) (remoteConnectNetworkEventDeregisterAny) (remoteConnectDomainEventDeregisterAny): Likewise. (remoteEventQueue): Hoist earlier to avoid forward declaration, and add parameter. Adjust all callers. * src/libvirt_private.syms (conf/object_event.h): Drop function. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 08 1月, 2014 1 次提交
-
-
由 Lénaïc Huard 提交于
When the host is configured with very restrictive firewall (default policy is DROP for all chains, including OUTPUT), the bridge driver for Linux adds netfilter entries to allow DHCP and DNS requests to go from the VM to the dnsmasq of the host. The issue that this commit fixes is the fact that a DROP policy on the OUTPUT chain blocks the DHCP replies from the host’s dnsmasq to the VM. As DHCP replies are sent in UDP, they are not caught by any --ctstate ESTABLISHED rule and so, need to be explicitly allowed. Signed-off-by: NLénaïc Huard <lenaic@lhuard.fr.eu.org>
-
- 04 1月, 2014 1 次提交
-
-
由 Eric Blake 提交于
While working on events, I found a number of minor issues; I'm hoisting these to the front rather than doing it piecemeal in the patches where I first noticed bad or missing documentation. * src/conf/object_event.c: Fix grammar, document all parameters of public functions, wrap some long lines. * src/conf/object_event.h: Likewise. * src/conf/network_event.c: Likewise. * src/conf/domain_event.c: Likewise (except for the large number of event creation functions). * src/libvirt_private.cyms (conf/object_event.h): Split... (conf/network_event.h): ...to account for new file. Signed-off-by: NEric Blake <eblake@redhat.com>
-