qemu_process.c

/*
 * qemu_process.c: QEMU process management
 *
 * Copyright (C) 2006-2015 Red Hat, Inc.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library.  If not, see
 * <http://www.gnu.org/licenses/>.
 *
 */

#include <config.h>

#include <fcntl.h>
#include <unistd.h>
#include <signal.h>
#include <sys/stat.h>
#if defined(__linux__)
# include <linux/capability.h>
#elif defined(__FreeBSD__)
# include <sys/param.h>
# include <sys/cpuset.h>
#endif

#include "qemu_process.h"
#include "qemu_processpriv.h"
#include "qemu_domain.h"
#include "qemu_cgroup.h"
#include "qemu_capabilities.h"
#include "qemu_monitor.h"
#include "qemu_command.h"
#include "qemu_hostdev.h"
#include "qemu_hotplug.h"
#include "qemu_migration.h"
#include "qemu_interface.h"

#include "cpu/cpu.h"
#include "datatypes.h"
#include "virlog.h"
#include "virerror.h"
#include "viralloc.h"
#include "virhook.h"
#include "virfile.h"
#include "virpidfile.h"
#include "c-ctype.h"
#include "nodeinfo.h"
#include "domain_audit.h"
#include "domain_nwfilter.h"
#include "locking/domain_lock.h"
#include "network/bridge_driver.h"
#include "viruuid.h"
#include "virprocess.h"
#include "virtime.h"
#include "virnetdevtap.h"
#include "virbitmap.h"
#include "viratomic.h"
#include "virnuma.h"
#include "virstring.h"
#include "virhostdev.h"
#include "storage/storage_driver.h"
#include "configmake.h"
#include "nwfilter_conf.h"
#include "netdev_bandwidth_conf.h"

#define VIR_FROM_THIS VIR_FROM_QEMU

VIR_LOG_INIT("qemu.qemu_process");

#define ATTACH_POSTFIX ": attaching\n"
#define SHUTDOWN_POSTFIX ": shutting down\n"

/**
 * qemuProcessRemoveDomainStatus
 *
 * remove all state files of a domain from statedir
 *
 * Returns 0 on success
 */
static int
qemuProcessRemoveDomainStatus(virQEMUDriverPtr driver,
                              virDomainObjPtr vm)
{
    char ebuf[1024];
    char *file = NULL;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
    int ret = -1;

    if (virAsprintf(&file, "%s/%s.xml", cfg->stateDir, vm->def->name) < 0)
        goto cleanup;

    if (unlink(file) < 0 && errno != ENOENT && errno != ENOTDIR)
        VIR_WARN("Failed to remove domain XML for %s: %s",
                 vm->def->name, virStrerror(errno, ebuf, sizeof(ebuf)));
    VIR_FREE(file);

    if (priv->pidfile &&
        unlink(priv->pidfile) < 0 &&
        errno != ENOENT)
        VIR_WARN("Failed to remove PID file for %s: %s",
                 vm->def->name, virStrerror(errno, ebuf, sizeof(ebuf)));

    ret = 0;
 cleanup:
    virObjectUnref(cfg);
    return ret;
}


/* XXX figure out how to remove this */
extern virQEMUDriverPtr qemu_driver;

/*
 * This is a callback registered with a qemuAgentPtr instance,
 * and to be invoked when the agent console hits an end of file
 * condition, or error, thus indicating VM shutdown should be
 * performed
 */
static void
qemuProcessHandleAgentEOF(qemuAgentPtr agent,
                          virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv;

    VIR_DEBUG("Received EOF from agent on %p '%s'", vm, vm->def->name);

    virObjectLock(vm);

    priv = vm->privateData;

    if (!priv->agent) {
        VIR_DEBUG("Agent freed already");
        goto unlock;
    }

    if (priv->beingDestroyed) {
        VIR_DEBUG("Domain is being destroyed, agent EOF is expected");
        goto unlock;
    }

    priv->agent = NULL;

    virObjectUnlock(vm);

    qemuAgentClose(agent);
    return;

 unlock:
    virObjectUnlock(vm);
    return;
}


/*
 * This is invoked when there is some kind of error
 * parsing data to/from the agent. The VM can continue
 * to run, but no further agent commands will be
 * allowed
 */
static void
qemuProcessHandleAgentError(qemuAgentPtr agent ATTRIBUTE_UNUSED,
                            virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv;

    VIR_DEBUG("Received error from agent on %p '%s'", vm, vm->def->name);

    virObjectLock(vm);

    priv = vm->privateData;

    priv->agentError = true;

    virObjectUnlock(vm);
}

static void qemuProcessHandleAgentDestroy(qemuAgentPtr agent,
                                          virDomainObjPtr vm)
{
    VIR_DEBUG("Received destroy agent=%p vm=%p", agent, vm);

    virObjectUnref(vm);
}


static qemuAgentCallbacks agentCallbacks = {
    .destroy = qemuProcessHandleAgentDestroy,
    .eofNotify = qemuProcessHandleAgentEOF,
    .errorNotify = qemuProcessHandleAgentError,
};

static virDomainChrSourceDefPtr
qemuFindAgentConfig(virDomainDefPtr def)
{
    virDomainChrSourceDefPtr config = NULL;
    size_t i;

    for (i = 0; i < def->nchannels; i++) {
        virDomainChrDefPtr channel = def->channels[i];

        if (channel->targetType != VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO)
            continue;

        if (STREQ_NULLABLE(channel->target.name, "org.qemu.guest_agent.0")) {
            config = &channel->source;
            break;
        }
    }

    return config;
}

static int
qemuConnectAgent(virQEMUDriverPtr driver, virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    int ret = -1;
    qemuAgentPtr agent = NULL;
    virDomainChrSourceDefPtr config = qemuFindAgentConfig(vm->def);

    if (!config)
        return 0;

    if (virSecurityManagerSetDaemonSocketLabel(driver->securityManager,
                                               vm->def) < 0) {
        VIR_ERROR(_("Failed to set security context for agent for %s"),
                  vm->def->name);
        goto cleanup;
    }

    /* Hold an extra reference because we can't allow 'vm' to be
     * deleted while the agent is active */
    virObjectRef(vm);

    ignore_value(virTimeMillisNow(&priv->agentStart));
    virObjectUnlock(vm);

    agent = qemuAgentOpen(vm,
                          config,
                          &agentCallbacks);

    virObjectLock(vm);
    priv->agentStart = 0;

    if (agent == NULL)
        virObjectUnref(vm);

    if (!virDomainObjIsActive(vm)) {
        qemuAgentClose(agent);
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("guest crashed while connecting to the guest agent"));
        ret = -2;
        goto cleanup;
    }

    if (virSecurityManagerClearSocketLabel(driver->securityManager,
                                           vm->def) < 0) {
        VIR_ERROR(_("Failed to clear security context for agent for %s"),
                  vm->def->name);
        qemuAgentClose(agent);
        goto cleanup;
    }


    priv->agent = agent;

    if (priv->agent == NULL) {
        VIR_INFO("Failed to connect agent for %s", vm->def->name);
        goto cleanup;
    }

    ret = 0;

 cleanup:
    return ret;
}


/*
 * This is a callback registered with a qemuMonitorPtr instance,
 * and to be invoked when the monitor console hits an end of file
 * condition, or error, thus indicating VM shutdown should be
 * performed
 */
static void
qemuProcessHandleMonitorEOF(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                            virDomainObjPtr vm,
                            void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    qemuDomainObjPrivatePtr priv;
    int eventReason = VIR_DOMAIN_EVENT_STOPPED_SHUTDOWN;
    int stopReason = VIR_DOMAIN_SHUTOFF_SHUTDOWN;
    const char *auditReason = "shutdown";

    VIR_DEBUG("Received EOF on %p '%s'", vm, vm->def->name);

    virObjectLock(vm);

    priv = vm->privateData;

    if (priv->beingDestroyed) {
        VIR_DEBUG("Domain is being destroyed, EOF is expected");
        goto unlock;
    }

    if (!virDomainObjIsActive(vm)) {
        VIR_DEBUG("Domain %p is not active, ignoring EOF", vm);
        goto unlock;
    }

    if (priv->monJSON && !priv->gotShutdown) {
        VIR_DEBUG("Monitor connection to '%s' closed without SHUTDOWN event; "
                  "assuming the domain crashed", vm->def->name);
        eventReason = VIR_DOMAIN_EVENT_STOPPED_FAILED;
        stopReason = VIR_DOMAIN_SHUTOFF_CRASHED;
        auditReason = "failed";
    }

    event = virDomainEventLifecycleNewFromObj(vm,
                                     VIR_DOMAIN_EVENT_STOPPED,
                                     eventReason);
    qemuProcessStop(driver, vm, stopReason, 0);
    virDomainAuditStop(vm, auditReason);

    if (!vm->persistent) {
        qemuDomainRemoveInactive(driver, vm);
        goto cleanup;
    }

 unlock:
    virObjectUnlock(vm);

 cleanup:
    if (event)
        qemuDomainEventQueue(driver, event);
}


/*
 * This is invoked when there is some kind of error
 * parsing data to/from the monitor. The VM can continue
 * to run, but no further monitor commands will be
 * allowed
 */
static void
qemuProcessHandleMonitorError(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                              virDomainObjPtr vm,
                              void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;

    VIR_DEBUG("Received error on %p '%s'", vm, vm->def->name);

    virObjectLock(vm);

    ((qemuDomainObjPrivatePtr) vm->privateData)->monError = true;
    event = virDomainEventControlErrorNewFromObj(vm);
    if (event)
        qemuDomainEventQueue(driver, event);

    virObjectUnlock(vm);
}


static virDomainDiskDefPtr
qemuProcessFindDomainDiskByPath(virDomainObjPtr vm,
                                const char *path)
{
    int idx = virDomainDiskIndexByName(vm->def, path, true);

    if (idx >= 0)
        return vm->def->disks[idx];

    virReportError(VIR_ERR_INTERNAL_ERROR,
                   _("no disk found with path %s"),
                   path);
    return NULL;
}

static virDomainDiskDefPtr
qemuProcessFindDomainDiskByAlias(virDomainObjPtr vm,
                                 const char *alias)
{
    size_t i;

    if (STRPREFIX(alias, QEMU_DRIVE_HOST_PREFIX))
        alias += strlen(QEMU_DRIVE_HOST_PREFIX);

    for (i = 0; i < vm->def->ndisks; i++) {
        virDomainDiskDefPtr disk;

        disk = vm->def->disks[i];
        if (disk->info.alias != NULL && STREQ(disk->info.alias, alias))
            return disk;
    }

    virReportError(VIR_ERR_INTERNAL_ERROR,
                   _("no disk found with alias %s"),
                   alias);
    return NULL;
}

static int
qemuProcessGetVolumeQcowPassphrase(virConnectPtr conn,
                                   virDomainDiskDefPtr disk,
                                   char **secretRet,
                                   size_t *secretLen)
{
    virSecretPtr secret;
    char *passphrase;
    unsigned char *data;
    size_t size;
    int ret = -1;
    virStorageEncryptionPtr enc;

    if (!disk->src->encryption) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("disk %s does not have any encryption information"),
                       disk->src->path);
        return -1;
    }
    enc = disk->src->encryption;

    if (!conn) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       "%s", _("cannot find secrets without a connection"));
        goto cleanup;
    }

    if (conn->secretDriver == NULL ||
        conn->secretDriver->secretLookupByUUID == NULL ||
        conn->secretDriver->secretGetValue == NULL) {
        virReportError(VIR_ERR_OPERATION_INVALID, "%s",
                       _("secret storage not supported"));
        goto cleanup;
    }

    if (enc->format != VIR_STORAGE_ENCRYPTION_FORMAT_QCOW ||
        enc->nsecrets != 1 ||
        enc->secrets[0]->type !=
        VIR_STORAGE_ENCRYPTION_SECRET_TYPE_PASSPHRASE) {
        virReportError(VIR_ERR_XML_ERROR,
                       _("invalid <encryption> for volume %s"),
                       virDomainDiskGetSource(disk));
        goto cleanup;
    }

    secret = conn->secretDriver->secretLookupByUUID(conn,
                                                    enc->secrets[0]->uuid);
    if (secret == NULL)
        goto cleanup;
    data = conn->secretDriver->secretGetValue(secret, &size, 0,
                                              VIR_SECRET_GET_VALUE_INTERNAL_CALL);
    virObjectUnref(secret);
    if (data == NULL)
        goto cleanup;

    if (memchr(data, '\0', size) != NULL) {
        memset(data, 0, size);
        VIR_FREE(data);
        virReportError(VIR_ERR_XML_ERROR,
                       _("format='qcow' passphrase for %s must not contain a "
                         "'\\0'"), virDomainDiskGetSource(disk));
        goto cleanup;
    }

    if (VIR_ALLOC_N(passphrase, size + 1) < 0) {
        memset(data, 0, size);
        VIR_FREE(data);
        goto cleanup;
    }
    memcpy(passphrase, data, size);
    passphrase[size] = '\0';

    memset(data, 0, size);
    VIR_FREE(data);

    *secretRet = passphrase;
    *secretLen = size;

    ret = 0;

 cleanup:
    return ret;
}

static int
qemuProcessFindVolumeQcowPassphrase(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                                    virConnectPtr conn,
                                    virDomainObjPtr vm,
                                    const char *path,
                                    char **secretRet,
                                    size_t *secretLen,
                                    void *opaque ATTRIBUTE_UNUSED)
{
    virDomainDiskDefPtr disk;
    int ret = -1;

    virObjectLock(vm);
    disk = qemuProcessFindDomainDiskByPath(vm, path);

    if (!disk)
        goto cleanup;

    ret = qemuProcessGetVolumeQcowPassphrase(conn, disk, secretRet, secretLen);

 cleanup:
    virObjectUnlock(vm);
    return ret;
}


static int
qemuProcessHandleReset(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                       virDomainObjPtr vm,
                       void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event;
    qemuDomainObjPrivatePtr priv;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);

    event = virDomainEventRebootNewFromObj(vm);
    priv = vm->privateData;
    if (priv->agent)
        qemuAgentNotifyEvent(priv->agent, QEMU_AGENT_EVENT_RESET);

    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
        VIR_WARN("Failed to save status on vm %s", vm->def->name);

    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);

    virObjectUnref(cfg);
    return 0;
}


/*
 * Since we have the '-no-shutdown' flag set, the
 * QEMU process will currently have guest OS shutdown
 * and the CPUS stopped. To fake the reboot, we thus
 * want todo a reset of the virtual hardware, followed
 * by restart of the CPUs. This should result in the
 * guest OS booting up again
 */
static void
qemuProcessFakeReboot(void *opaque)
{
    virQEMUDriverPtr driver = qemu_driver;
    virDomainObjPtr vm = opaque;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
    virDomainRunningReason reason = VIR_DOMAIN_RUNNING_BOOTED;
    int ret = -1, rc;

    VIR_DEBUG("vm=%p", vm);
    virObjectLock(vm);
    if (qemuDomainObjBeginJob(driver, vm, QEMU_JOB_MODIFY) < 0)
        goto cleanup;

    if (!virDomainObjIsActive(vm)) {
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("guest unexpectedly quit"));
        goto endjob;
    }

    qemuDomainObjEnterMonitor(driver, vm);
    rc = qemuMonitorSystemReset(priv->mon);

    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        goto endjob;

    if (rc < 0)
        goto endjob;

    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_CRASHED)
        reason = VIR_DOMAIN_RUNNING_CRASHED;

    if (qemuProcessStartCPUs(driver, vm, NULL,
                             reason,
                             QEMU_ASYNC_JOB_NONE) < 0) {
        if (virGetLastError() == NULL)
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           "%s", _("resume operation failed"));
        goto endjob;
    }
    priv->gotShutdown = false;
    event = virDomainEventLifecycleNewFromObj(vm,
                                     VIR_DOMAIN_EVENT_RESUMED,
                                     VIR_DOMAIN_EVENT_RESUMED_UNPAUSED);

    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
        VIR_WARN("Unable to save status on vm %s after state change",
                 vm->def->name);
    }

    ret = 0;

 endjob:
    qemuDomainObjEndJob(driver, vm);

 cleanup:
    if (ret == -1)
        ignore_value(qemuProcessKill(vm, VIR_QEMU_PROCESS_KILL_FORCE));
    qemuDomObjEndAPI(&vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);
}


void
qemuProcessShutdownOrReboot(virQEMUDriverPtr driver,
                            virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;

    if (priv->fakeReboot) {
        qemuDomainSetFakeReboot(driver, vm, false);
        virObjectRef(vm);
        virThread th;
        if (virThreadCreate(&th,
                            false,
                            qemuProcessFakeReboot,
                            vm) < 0) {
            VIR_ERROR(_("Failed to create reboot thread, killing domain"));
            ignore_value(qemuProcessKill(vm, VIR_QEMU_PROCESS_KILL_NOWAIT));
            virObjectUnref(vm);
        }
    } else {
        ignore_value(qemuProcessKill(vm, VIR_QEMU_PROCESS_KILL_NOWAIT));
    }
}


static int
qemuProcessHandleEvent(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                       virDomainObjPtr vm,
                       const char *eventName,
                       long long seconds,
                       unsigned int micros,
                       const char *details,
                       void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;

    VIR_DEBUG("vm=%p", vm);

    virObjectLock(vm);
    event = virDomainQemuMonitorEventNew(vm->def->id, vm->def->name,
                                         vm->def->uuid, eventName,
                                         seconds, micros, details);

    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);

    return 0;
}


static int
qemuProcessHandleShutdown(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                          virDomainObjPtr vm,
                          void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    qemuDomainObjPrivatePtr priv;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    VIR_DEBUG("vm=%p", vm);

    virObjectLock(vm);

    priv = vm->privateData;
    if (priv->gotShutdown) {
        VIR_DEBUG("Ignoring repeated SHUTDOWN event from domain %s",
                  vm->def->name);
        goto unlock;
    } else if (!virDomainObjIsActive(vm)) {
        VIR_DEBUG("Ignoring SHUTDOWN event from inactive domain %s",
                  vm->def->name);
        goto unlock;
    }
    priv->gotShutdown = true;

    VIR_DEBUG("Transitioned guest %s to shutdown state",
              vm->def->name);
    virDomainObjSetState(vm,
                         VIR_DOMAIN_SHUTDOWN,
                         VIR_DOMAIN_SHUTDOWN_UNKNOWN);
    event = virDomainEventLifecycleNewFromObj(vm,
                                     VIR_DOMAIN_EVENT_SHUTDOWN,
                                     VIR_DOMAIN_EVENT_SHUTDOWN_FINISHED);

    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
        VIR_WARN("Unable to save status on vm %s after state change",
                 vm->def->name);
    }

    if (priv->agent)
        qemuAgentNotifyEvent(priv->agent, QEMU_AGENT_EVENT_SHUTDOWN);

    qemuProcessShutdownOrReboot(driver, vm);

 unlock:
    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);

    return 0;
}


static int
qemuProcessHandleStop(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                      virDomainObjPtr vm,
                      void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
        qemuDomainObjPrivatePtr priv = vm->privateData;

        if (priv->gotShutdown) {
            VIR_DEBUG("Ignoring STOP event after SHUTDOWN");
            goto unlock;
        }

        VIR_DEBUG("Transitioned guest %s to paused state",
                  vm->def->name);

        if (priv->job.current)
            ignore_value(virTimeMillisNow(&priv->job.current->stopped));

        virDomainObjSetState(vm, VIR_DOMAIN_PAUSED, VIR_DOMAIN_PAUSED_UNKNOWN);
        event = virDomainEventLifecycleNewFromObj(vm,
                                         VIR_DOMAIN_EVENT_SUSPENDED,
                                         VIR_DOMAIN_EVENT_SUSPENDED_PAUSED);

        VIR_FREE(priv->lockState);
        if (virDomainLockProcessPause(driver->lockManager, vm, &priv->lockState) < 0)
            VIR_WARN("Unable to release lease on %s", vm->def->name);
        VIR_DEBUG("Preserving lock state '%s'", NULLSTR(priv->lockState));

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after state change",
                     vm->def->name);
        }
    }

 unlock:
    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);

    return 0;
}


static int
qemuProcessHandleResume(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                        virDomainObjPtr vm,
                        void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_PAUSED) {
        qemuDomainObjPrivatePtr priv = vm->privateData;

        if (priv->gotShutdown) {
            VIR_DEBUG("Ignoring RESUME event after SHUTDOWN");
            goto unlock;
        }

        VIR_DEBUG("Transitioned guest %s out of paused into resumed state",
                  vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_RUNNING,
                                 VIR_DOMAIN_RUNNING_UNPAUSED);
        event = virDomainEventLifecycleNewFromObj(vm,
                                         VIR_DOMAIN_EVENT_RESUMED,
                                         VIR_DOMAIN_EVENT_RESUMED_UNPAUSED);

        VIR_DEBUG("Using lock state '%s' on resume event", NULLSTR(priv->lockState));
        if (virDomainLockProcessResume(driver->lockManager, cfg->uri,
                                       vm, priv->lockState) < 0) {
            /* Don't free priv->lockState on error, because we need
             * to make sure we have state still present if the user
             * tries to resume again
             */
            goto unlock;
        }
        VIR_FREE(priv->lockState);

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after state change",
                     vm->def->name);
        }
    }

 unlock:
    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandleRTCChange(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                           virDomainObjPtr vm,
                           long long offset,
                           void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);

    if (vm->def->clock.offset == VIR_DOMAIN_CLOCK_OFFSET_VARIABLE) {
        /* when a basedate is manually given on the qemu commandline
         * rather than simply "-rtc base=utc", the offset sent by qemu
         * in this event is *not* the new offset from UTC, but is
         * instead the new offset from the *original basedate* +
         * uptime. For example, if the original offset was 3600 and
         * the guest clock has been advanced by 10 seconds, qemu will
         * send "10" in the event - this means that the new offset
         * from UTC is 3610, *not* 10. If the guest clock is advanced
         * by another 10 seconds, qemu will now send "20" - i.e. each
         * event is the sum of the most recent change and all previous
         * changes since the domain was started. Fortunately, we have
         * saved the initial offset in "adjustment0", so to arrive at
         * the proper new "adjustment", we just add the most recent
         * offset to adjustment0.
         */
        offset += vm->def->clock.data.variable.adjustment0;
        vm->def->clock.data.variable.adjustment = offset;

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
           VIR_WARN("unable to save domain status with RTC change");
    }

    event = virDomainEventRTCChangeNewFromObj(vm, offset);

    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);
    return 0;
}


static int
qemuProcessHandleWatchdog(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                          virDomainObjPtr vm,
                          int action,
                          void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr watchdogEvent = NULL;
    virObjectEventPtr lifecycleEvent = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    watchdogEvent = virDomainEventWatchdogNewFromObj(vm, action);

    if (action == VIR_DOMAIN_EVENT_WATCHDOG_PAUSE &&
        virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
        qemuDomainObjPrivatePtr priv = vm->privateData;
        VIR_DEBUG("Transitioned guest %s to paused state due to watchdog", vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_PAUSED, VIR_DOMAIN_PAUSED_WATCHDOG);
        lifecycleEvent = virDomainEventLifecycleNewFromObj(vm,
                                                  VIR_DOMAIN_EVENT_SUSPENDED,
                                                  VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG);

        VIR_FREE(priv->lockState);
        if (virDomainLockProcessPause(driver->lockManager, vm, &priv->lockState) < 0)
            VIR_WARN("Unable to release lease on %s", vm->def->name);
        VIR_DEBUG("Preserving lock state '%s'", NULLSTR(priv->lockState));

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after watchdog event",
                     vm->def->name);
        }
    }

    if (vm->def->watchdog->action == VIR_DOMAIN_WATCHDOG_ACTION_DUMP) {
        struct qemuProcessEvent *processEvent;
        if (VIR_ALLOC(processEvent) == 0) {
            processEvent->eventType = QEMU_PROCESS_EVENT_WATCHDOG;
            processEvent->action = VIR_DOMAIN_WATCHDOG_ACTION_DUMP;
            processEvent->vm = vm;
            /* Hold an extra reference because we can't allow 'vm' to be
             * deleted before handling watchdog event is finished.
             */
            virObjectRef(vm);
            if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
                if (!virObjectUnref(vm))
                    vm = NULL;
                VIR_FREE(processEvent);
            }
        }
    }

    if (vm)
        virObjectUnlock(vm);
    if (watchdogEvent)
        qemuDomainEventQueue(driver, watchdogEvent);
    if (lifecycleEvent)
        qemuDomainEventQueue(driver, lifecycleEvent);

    virObjectUnref(cfg);
    return 0;
}


static int
qemuProcessHandleIOError(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                         virDomainObjPtr vm,
                         const char *diskAlias,
                         int action,
                         const char *reason,
                         void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr ioErrorEvent = NULL;
    virObjectEventPtr ioErrorEvent2 = NULL;
    virObjectEventPtr lifecycleEvent = NULL;
    const char *srcPath;
    const char *devAlias;
    virDomainDiskDefPtr disk;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias);

    if (disk) {
        srcPath = virDomainDiskGetSource(disk);
        devAlias = disk->info.alias;
    } else {
        srcPath = "";
        devAlias = "";
    }

    ioErrorEvent = virDomainEventIOErrorNewFromObj(vm, srcPath, devAlias, action);
    ioErrorEvent2 = virDomainEventIOErrorReasonNewFromObj(vm, srcPath, devAlias, action, reason);

    if (action == VIR_DOMAIN_EVENT_IO_ERROR_PAUSE &&
        virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
        qemuDomainObjPrivatePtr priv = vm->privateData;
        VIR_DEBUG("Transitioned guest %s to paused state due to IO error", vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_PAUSED, VIR_DOMAIN_PAUSED_IOERROR);
        lifecycleEvent = virDomainEventLifecycleNewFromObj(vm,
                                                  VIR_DOMAIN_EVENT_SUSPENDED,
                                                  VIR_DOMAIN_EVENT_SUSPENDED_IOERROR);

        VIR_FREE(priv->lockState);
        if (virDomainLockProcessPause(driver->lockManager, vm, &priv->lockState) < 0)
            VIR_WARN("Unable to release lease on %s", vm->def->name);
        VIR_DEBUG("Preserving lock state '%s'", NULLSTR(priv->lockState));

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
            VIR_WARN("Unable to save status on vm %s after IO error", vm->def->name);
    }
    virObjectUnlock(vm);

    if (ioErrorEvent)
        qemuDomainEventQueue(driver, ioErrorEvent);
    if (ioErrorEvent2)
        qemuDomainEventQueue(driver, ioErrorEvent2);
    if (lifecycleEvent)
        qemuDomainEventQueue(driver, lifecycleEvent);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandleBlockJob(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                          virDomainObjPtr vm,
                          const char *diskAlias,
                          int type,
                          int status,
                          void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virObjectEventPtr event2 = NULL;
    const char *path;
    virDomainDiskDefPtr disk;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
    virDomainDiskDefPtr persistDisk = NULL;
    bool save = false;

    virObjectLock(vm);
    disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias);

    if (disk) {
        /* Have to generate two variants of the event for old vs. new
         * client callbacks */
        if (type == VIR_DOMAIN_BLOCK_JOB_TYPE_COMMIT &&
            disk->mirrorJob == VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT)
            type = disk->mirrorJob;
        path = virDomainDiskGetSource(disk);
        event = virDomainEventBlockJobNewFromObj(vm, path, type, status);
        event2 = virDomainEventBlockJob2NewFromObj(vm, disk->dst, type,
                                                   status);

        /* If we completed a block pull or commit, then update the XML
         * to match.  */
        switch ((virConnectDomainEventBlockJobStatus) status) {
        case VIR_DOMAIN_BLOCK_JOB_COMPLETED:
            if (disk->mirrorState == VIR_DOMAIN_DISK_MIRROR_STATE_PIVOT) {
                if (vm->newDef) {
                    int indx = virDomainDiskIndexByName(vm->newDef, disk->dst,
                                                        false);
                    virStorageSourcePtr copy = NULL;

                    if (indx >= 0) {
                        persistDisk = vm->newDef->disks[indx];
                        copy = virStorageSourceCopy(disk->mirror, false);
                        if (virStorageSourceInitChainElement(copy,
                                                             persistDisk->src,
                                                             true) < 0) {
                            VIR_WARN("Unable to update persistent definition "
                                     "on vm %s after block job",
                                     vm->def->name);
                            virStorageSourceFree(copy);
                            copy = NULL;
                            persistDisk = NULL;
                        }
                    }
                    if (copy) {
                        virStorageSourceFree(persistDisk->src);
                        persistDisk->src = copy;
                    }
                }

                /* XXX We want to revoke security labels and disk
                 * lease, as well as audit that revocation, before
                 * dropping the original source.  But it gets tricky
                 * if both source and mirror share common backing
                 * files (we want to only revoke the non-shared
                 * portion of the chain); so for now, we leak the
                 * access to the original.  */
                virStorageSourceFree(disk->src);
                disk->src = disk->mirror;
            } else {
                virStorageSourceFree(disk->mirror);
            }

            /* Recompute the cached backing chain to match our
             * updates.  Better would be storing the chain ourselves
             * rather than reprobing, but we haven't quite completed
             * that conversion to use our XML tracking. */
            disk->mirror = NULL;
            save = disk->mirrorState != VIR_DOMAIN_DISK_MIRROR_STATE_NONE;
            disk->mirrorState = VIR_DOMAIN_DISK_MIRROR_STATE_NONE;
            disk->mirrorJob = VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN;
            ignore_value(qemuDomainDetermineDiskChain(driver, vm, disk,
                                                      true, true));
            break;

        case VIR_DOMAIN_BLOCK_JOB_READY:
            disk->mirrorState = VIR_DOMAIN_DISK_MIRROR_STATE_READY;
            save = true;
            break;

        case VIR_DOMAIN_BLOCK_JOB_FAILED:
        case VIR_DOMAIN_BLOCK_JOB_CANCELED:
            virStorageSourceFree(disk->mirror);
            disk->mirror = NULL;
            disk->mirrorState = status == VIR_DOMAIN_BLOCK_JOB_FAILED ?
                VIR_DOMAIN_DISK_MIRROR_STATE_ABORT : VIR_DOMAIN_DISK_MIRROR_STATE_NONE;
            disk->mirrorJob = VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN;
            save = true;
            break;

        case VIR_DOMAIN_BLOCK_JOB_LAST:
            break;
        }
    }

    if (save) {
        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
            VIR_WARN("Unable to save status on vm %s after block job",
                     vm->def->name);
        if (persistDisk && virDomainSaveConfig(cfg->configDir,
                                               vm->newDef) < 0)
            VIR_WARN("Unable to update persistent definition on vm %s "
                     "after block job", vm->def->name);
    }
    virObjectUnlock(vm);
    virObjectUnref(cfg);

    if (event)
        qemuDomainEventQueue(driver, event);
    if (event2)
        qemuDomainEventQueue(driver, event2);

    return 0;
}

static int
qemuProcessHandleGraphics(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                          virDomainObjPtr vm,
                          int phase,
                          int localFamily,
                          const char *localNode,
                          const char *localService,
                          int remoteFamily,
                          const char *remoteNode,
                          const char *remoteService,
                          const char *authScheme,
                          const char *x509dname,
                          const char *saslUsername,
                          void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event;
    virDomainEventGraphicsAddressPtr localAddr = NULL;
    virDomainEventGraphicsAddressPtr remoteAddr = NULL;
    virDomainEventGraphicsSubjectPtr subject = NULL;
    size_t i;

    if (VIR_ALLOC(localAddr) < 0)
        goto error;
    localAddr->family = localFamily;
    if (VIR_STRDUP(localAddr->service, localService) < 0 ||
        VIR_STRDUP(localAddr->node, localNode) < 0)
        goto error;

    if (VIR_ALLOC(remoteAddr) < 0)
        goto error;
    remoteAddr->family = remoteFamily;
    if (VIR_STRDUP(remoteAddr->service, remoteService) < 0 ||
        VIR_STRDUP(remoteAddr->node, remoteNode) < 0)
        goto error;

    if (VIR_ALLOC(subject) < 0)
        goto error;
    if (x509dname) {
        if (VIR_REALLOC_N(subject->identities, subject->nidentity+1) < 0)
            goto error;
        subject->nidentity++;
        if (VIR_STRDUP(subject->identities[subject->nidentity-1].type, "x509dname") < 0 ||
            VIR_STRDUP(subject->identities[subject->nidentity-1].name, x509dname) < 0)
            goto error;
    }
    if (saslUsername) {
        if (VIR_REALLOC_N(subject->identities, subject->nidentity+1) < 0)
            goto error;
        subject->nidentity++;
        if (VIR_STRDUP(subject->identities[subject->nidentity-1].type, "saslUsername") < 0 ||
            VIR_STRDUP(subject->identities[subject->nidentity-1].name, saslUsername) < 0)
            goto error;
    }

    virObjectLock(vm);
    event = virDomainEventGraphicsNewFromObj(vm, phase, localAddr, remoteAddr, authScheme, subject);
    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);

    return 0;

 error:
    if (localAddr) {
        VIR_FREE(localAddr->service);
        VIR_FREE(localAddr->node);
        VIR_FREE(localAddr);
    }
    if (remoteAddr) {
        VIR_FREE(remoteAddr->service);
        VIR_FREE(remoteAddr->node);
        VIR_FREE(remoteAddr);
    }
    if (subject) {
        for (i = 0; i < subject->nidentity; i++) {
            VIR_FREE(subject->identities[i].type);
            VIR_FREE(subject->identities[i].name);
        }
        VIR_FREE(subject->identities);
        VIR_FREE(subject);
    }

    return -1;
}

static int
qemuProcessHandleTrayChange(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                            virDomainObjPtr vm,
                            const char *devAlias,
                            int reason,
                            void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virDomainDiskDefPtr disk;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    disk = qemuProcessFindDomainDiskByAlias(vm, devAlias);

    if (disk) {
        event = virDomainEventTrayChangeNewFromObj(vm,
                                                   devAlias,
                                                   reason);
        /* Update disk tray status */
        if (reason == VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN)
            disk->tray_status = VIR_DOMAIN_DISK_TRAY_OPEN;
        else if (reason == VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE)
            disk->tray_status = VIR_DOMAIN_DISK_TRAY_CLOSED;

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after tray moved event",
                     vm->def->name);
        }
    }

    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandlePMWakeup(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                          virDomainObjPtr vm,
                          void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virObjectEventPtr lifecycleEvent = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    event = virDomainEventPMWakeupNewFromObj(vm);

    /* Don't set domain status back to running if it wasn't paused
     * from guest side, otherwise it can just cause confusion.
     */
    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_PMSUSPENDED) {
        VIR_DEBUG("Transitioned guest %s from pmsuspended to running "
                  "state due to QMP wakeup event", vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_RUNNING,
                             VIR_DOMAIN_RUNNING_WAKEUP);
        lifecycleEvent = virDomainEventLifecycleNewFromObj(vm,
                                                  VIR_DOMAIN_EVENT_STARTED,
                                                  VIR_DOMAIN_EVENT_STARTED_WAKEUP);

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after wakeup event",
                     vm->def->name);
        }
    }

    virObjectUnlock(vm);
    if (event)
        qemuDomainEventQueue(driver, event);
    if (lifecycleEvent)
        qemuDomainEventQueue(driver, lifecycleEvent);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandlePMSuspend(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                           virDomainObjPtr vm,
                           void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virObjectEventPtr lifecycleEvent = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    event = virDomainEventPMSuspendNewFromObj(vm);

    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
        qemuDomainObjPrivatePtr priv = vm->privateData;
        VIR_DEBUG("Transitioned guest %s to pmsuspended state due to "
                  "QMP suspend event", vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_PMSUSPENDED,
                             VIR_DOMAIN_PMSUSPENDED_UNKNOWN);
        lifecycleEvent =
            virDomainEventLifecycleNewFromObj(vm,
                                     VIR_DOMAIN_EVENT_PMSUSPENDED,
                                     VIR_DOMAIN_EVENT_PMSUSPENDED_MEMORY);

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after suspend event",
                     vm->def->name);
        }

        if (priv->agent)
            qemuAgentNotifyEvent(priv->agent, QEMU_AGENT_EVENT_SUSPEND);
    }

    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);
    if (lifecycleEvent)
        qemuDomainEventQueue(driver, lifecycleEvent);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandleBalloonChange(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                               virDomainObjPtr vm,
                               unsigned long long actual,
                               void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    event = virDomainEventBalloonChangeNewFromObj(vm, actual);

    VIR_DEBUG("Updating balloon from %lld to %lld kb",
              vm->def->mem.cur_balloon, actual);
    vm->def->mem.cur_balloon = actual;

    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
        VIR_WARN("unable to save domain status with balloon change");

    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);
    virObjectUnref(cfg);
    return 0;
}

static int
qemuProcessHandlePMSuspendDisk(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                               virDomainObjPtr vm,
                               void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    virObjectEventPtr event = NULL;
    virObjectEventPtr lifecycleEvent = NULL;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    virObjectLock(vm);
    event = virDomainEventPMSuspendDiskNewFromObj(vm);

    if (virDomainObjGetState(vm, NULL) == VIR_DOMAIN_RUNNING) {
        qemuDomainObjPrivatePtr priv = vm->privateData;
        VIR_DEBUG("Transitioned guest %s to pmsuspended state due to "
                  "QMP suspend_disk event", vm->def->name);

        virDomainObjSetState(vm, VIR_DOMAIN_PMSUSPENDED,
                             VIR_DOMAIN_PMSUSPENDED_UNKNOWN);
        lifecycleEvent =
            virDomainEventLifecycleNewFromObj(vm,
                                     VIR_DOMAIN_EVENT_PMSUSPENDED,
                                     VIR_DOMAIN_EVENT_PMSUSPENDED_DISK);

        if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0) {
            VIR_WARN("Unable to save status on vm %s after suspend event",
                     vm->def->name);
        }

        if (priv->agent)
            qemuAgentNotifyEvent(priv->agent, QEMU_AGENT_EVENT_SUSPEND);
    }

    virObjectUnlock(vm);

    if (event)
        qemuDomainEventQueue(driver, event);
    if (lifecycleEvent)
        qemuDomainEventQueue(driver, lifecycleEvent);
    virObjectUnref(cfg);

    return 0;
}


static int
qemuProcessHandleGuestPanic(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                            virDomainObjPtr vm,
                            void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    struct qemuProcessEvent *processEvent;

    virObjectLock(vm);
    if (VIR_ALLOC(processEvent) < 0)
        goto cleanup;

    processEvent->eventType = QEMU_PROCESS_EVENT_GUESTPANIC;
    processEvent->action = vm->def->onCrash;
    processEvent->vm = vm;
    /* Hold an extra reference because we can't allow 'vm' to be
     * deleted before handling guest panic event is finished.
     */
    virObjectRef(vm);
    if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
        if (!virObjectUnref(vm))
            vm = NULL;
        VIR_FREE(processEvent);
    }

 cleanup:
    if (vm)
        virObjectUnlock(vm);

    return 0;
}


int
qemuProcessHandleDeviceDeleted(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                               virDomainObjPtr vm,
                               const char *devAlias,
                               void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    struct qemuProcessEvent *processEvent = NULL;
    char *data;

    virObjectLock(vm);

    VIR_DEBUG("Device %s removed from domain %p %s",
              devAlias, vm, vm->def->name);

    if (qemuDomainSignalDeviceRemoval(vm, devAlias))
        goto cleanup;

    if (VIR_ALLOC(processEvent) < 0)
        goto error;

    processEvent->eventType = QEMU_PROCESS_EVENT_DEVICE_DELETED;
    if (VIR_STRDUP(data, devAlias) < 0)
        goto error;
    processEvent->data = data;
    processEvent->vm = vm;

    virObjectRef(vm);
    if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
        ignore_value(virObjectUnref(vm));
        goto error;
    }

 cleanup:
    virObjectUnlock(vm);
    return 0;
 error:
    if (processEvent)
        VIR_FREE(processEvent->data);
    VIR_FREE(processEvent);
    goto cleanup;
}


static int
qemuProcessHandleNicRxFilterChanged(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                                    virDomainObjPtr vm,
                                    const char *devAlias,
                                    void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    struct qemuProcessEvent *processEvent = NULL;
    char *data;

    virObjectLock(vm);

    VIR_DEBUG("Device %s RX Filter changed in domain %p %s",
              devAlias, vm, vm->def->name);

    if (VIR_ALLOC(processEvent) < 0)
        goto error;

    processEvent->eventType = QEMU_PROCESS_EVENT_NIC_RX_FILTER_CHANGED;
    if (VIR_STRDUP(data, devAlias) < 0)
        goto error;
    processEvent->data = data;
    processEvent->vm = vm;

    virObjectRef(vm);
    if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
        ignore_value(virObjectUnref(vm));
        goto error;
    }

 cleanup:
    virObjectUnlock(vm);
    return 0;
 error:
    if (processEvent)
        VIR_FREE(processEvent->data);
    VIR_FREE(processEvent);
    goto cleanup;
}


static int
qemuProcessHandleSerialChanged(qemuMonitorPtr mon ATTRIBUTE_UNUSED,
                               virDomainObjPtr vm,
                               const char *devAlias,
                               bool connected,
                               void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    struct qemuProcessEvent *processEvent = NULL;
    char *data;

    virObjectLock(vm);

    VIR_DEBUG("Serial port %s state changed to '%d' in domain %p %s",
              devAlias, connected, vm, vm->def->name);

    if (VIR_ALLOC(processEvent) < 0)
        goto error;

    processEvent->eventType = QEMU_PROCESS_EVENT_SERIAL_CHANGED;
    if (VIR_STRDUP(data, devAlias) < 0)
        goto error;
    processEvent->data = data;
    processEvent->action = connected;
    processEvent->vm = vm;

    virObjectRef(vm);
    if (virThreadPoolSendJob(driver->workerPool, 0, processEvent) < 0) {
        ignore_value(virObjectUnref(vm));
        goto error;
    }

 cleanup:
    virObjectUnlock(vm);
    return 0;
 error:
    if (processEvent)
        VIR_FREE(processEvent->data);
    VIR_FREE(processEvent);
    goto cleanup;
}


static qemuMonitorCallbacks monitorCallbacks = {
    .eofNotify = qemuProcessHandleMonitorEOF,
    .errorNotify = qemuProcessHandleMonitorError,
    .diskSecretLookup = qemuProcessFindVolumeQcowPassphrase,
    .domainEvent = qemuProcessHandleEvent,
    .domainShutdown = qemuProcessHandleShutdown,
    .domainStop = qemuProcessHandleStop,
    .domainResume = qemuProcessHandleResume,
    .domainReset = qemuProcessHandleReset,
    .domainRTCChange = qemuProcessHandleRTCChange,
    .domainWatchdog = qemuProcessHandleWatchdog,
    .domainIOError = qemuProcessHandleIOError,
    .domainGraphics = qemuProcessHandleGraphics,
    .domainBlockJob = qemuProcessHandleBlockJob,
    .domainTrayChange = qemuProcessHandleTrayChange,
    .domainPMWakeup = qemuProcessHandlePMWakeup,
    .domainPMSuspend = qemuProcessHandlePMSuspend,
    .domainBalloonChange = qemuProcessHandleBalloonChange,
    .domainPMSuspendDisk = qemuProcessHandlePMSuspendDisk,
    .domainGuestPanic = qemuProcessHandleGuestPanic,
    .domainDeviceDeleted = qemuProcessHandleDeviceDeleted,
    .domainNicRxFilterChanged = qemuProcessHandleNicRxFilterChanged,
    .domainSerialChange = qemuProcessHandleSerialChanged,
};

static int
qemuConnectMonitor(virQEMUDriverPtr driver, virDomainObjPtr vm, int asyncJob,
                   int logfd)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    int ret = -1;
    qemuMonitorPtr mon = NULL;

    if (virSecurityManagerSetDaemonSocketLabel(driver->securityManager,
                                               vm->def) < 0) {
        VIR_ERROR(_("Failed to set security context for monitor for %s"),
                  vm->def->name);
        goto error;
    }

    /* Hold an extra reference because we can't allow 'vm' to be
     * deleted unitl the monitor gets its own reference. */
    virObjectRef(vm);

    ignore_value(virTimeMillisNow(&priv->monStart));
    virObjectUnlock(vm);

    mon = qemuMonitorOpen(vm,
                          priv->monConfig,
                          priv->monJSON,
                          &monitorCallbacks,
                          driver);

    if (mon)
        ignore_value(qemuMonitorSetDomainLog(mon, logfd));

    virObjectLock(vm);
    virObjectUnref(vm);
    priv->monStart = 0;

    if (!virDomainObjIsActive(vm)) {
        qemuMonitorClose(mon);
        mon = NULL;
    }
    priv->mon = mon;

    if (virSecurityManagerClearSocketLabel(driver->securityManager, vm->def) < 0) {
        VIR_ERROR(_("Failed to clear security context for monitor for %s"),
                  vm->def->name);
        goto error;
    }

    if (priv->mon == NULL) {
        VIR_INFO("Failed to connect monitor for %s", vm->def->name);
        goto error;
    }


    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto error;
    ret = qemuMonitorSetCapabilities(priv->mon);
    if (ret == 0 &&
        virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_MONITOR_JSON))
        ret = virQEMUCapsProbeQMP(priv->qemuCaps, priv->mon);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        return -1;

 error:

    return ret;
}


/**
 * qemuProcessReadLog: Read log file of a qemu VM
 * @fd: File descriptor of the log file
 * @buf: buffer to store the read messages
 * @buflen: allocated space available in @buf
 * @off: Offset to start reading from
 * @skipchar: Skip messages about created character devices
 *
 * Reads log of a qemu VM. Skips messages not produced by qemu or irrelevant
 * messages. Returns length of the message stored in @buf, or -1 on error.
 */
int
qemuProcessReadLog(int fd, char *buf, int buflen, int off, bool skipchar)
{
    char *filter_next = buf;
    ssize_t bytes;
    char *eol;

    while (off < buflen - 1) {
        bytes = saferead(fd, buf + off, buflen - off - 1);
        if (bytes < 0)
            return -1;

        off += bytes;
        buf[off] = '\0';

        if (bytes == 0)
            break;

        /* Filter out debug messages from intermediate libvirt process */
        while ((eol = strchr(filter_next, '\n'))) {
            *eol = '\0';
            if (virLogProbablyLogMessage(filter_next) ||
                (skipchar &&
                 STRPREFIX(filter_next, "char device redirected to"))) {
                memmove(filter_next, eol + 1, off - (eol - buf));
                off -= eol + 1 - filter_next;
            } else {
                filter_next = eol + 1;
                *eol = '\n';
            }
        }
    }

    return off;
}

typedef int qemuProcessLogHandleOutput(virDomainObjPtr vm,
                                       const char *output,
                                       int fd);

/*
 * Returns -1 for error, 0 on success
 */
static int
qemuProcessReadLogOutput(virDomainObjPtr vm,
                         int fd,
                         char *buf,
                         size_t buflen,
                         qemuProcessLogHandleOutput func,
                         const char *what,
                         int timeout)
{
    int retries = (timeout*10);
    int got = 0;
    int ret = -1;

    buf[0] = '\0';

    while (retries) {
        ssize_t func_ret;
        bool isdead;

        func_ret = func(vm, buf, fd);

        isdead = kill(vm->pid, 0) == -1 && errno == ESRCH;

        got = qemuProcessReadLog(fd, buf, buflen, got, false);
        if (got < 0) {
            virReportSystemError(errno,
                                 _("Failure while reading %s log output"),
                                 what);
            goto cleanup;
        }

        if (got == buflen-1) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("Out of space while reading %s log output: %s"),
                           what, buf);
            goto cleanup;
        }

        if (isdead) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("Process exited while reading %s log output: %s"),
                           what, buf);
            goto cleanup;
        }

        if (func_ret <= 0) {
            ret = func_ret;
            goto cleanup;
        }

        usleep(100*1000);
        retries--;
    }

    virReportError(VIR_ERR_INTERNAL_ERROR,
                   _("Timed out while reading %s log output: %s"),
                   what, buf);

 cleanup:
    return ret;
}


/*
 * Read domain log and probably overwrite error if there's one in
 * the domain log file. This function exists to cover the small
 * window between fork() and exec() during which child may fail
 * by libvirt's hand, e.g. placing onto a NUMA node failed.
 */
static int
qemuProcessReadChildErrors(virQEMUDriverPtr driver,
                           virDomainObjPtr vm,
                           off_t originalOff)
{
    int ret = -1;
    int logfd;
    off_t off = 0;
    ssize_t bytes;
    char buf[1024] = {0};
    char *eol, *filter_next = buf;

    if ((logfd = qemuDomainOpenLog(driver, vm, originalOff)) < 0)
        goto cleanup;

    while (off < sizeof(buf) - 1) {
        bytes = saferead(logfd, buf + off, sizeof(buf) - off - 1);
        if (bytes < 0) {
            VIR_WARN("unable to read from log file: %s",
                     virStrerror(errno, buf, sizeof(buf)));
            goto cleanup;
        }

        off += bytes;
        buf[off] = '\0';

        if (bytes == 0)
            break;

        while ((eol = strchr(filter_next, '\n'))) {
            *eol = '\0';
            if (STRPREFIX(filter_next, "libvirt: ")) {
                filter_next = eol + 1;
                *eol = '\n';
                break;
            } else {
                memmove(filter_next, eol + 1, off - (eol - buf));
                off -= eol + 1 - filter_next;
            }
        }
    }

    if (off > 0) {
        /* Found an error in the log. Report it */
        virResetLastError();
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("Process exited prior to exec: %s"),
                       buf);
    }

    ret = 0;

 cleanup:
    VIR_FORCE_CLOSE(logfd);
    return ret;
}


/*
 * Look at a chunk of data from the QEMU stdout logs and try to
 * find a TTY device, as indicated by a line like
 *
 * char device redirected to /dev/pts/3
 *
 * Returns -1 for error, 0 success, 1 continue reading
 */
static int
qemuProcessExtractTTYPath(const char *haystack,
                          size_t *offset,
                          char **path)
{
    static const char needle[] = "char device redirected to";
    char *tmp, *dev;

    VIR_FREE(*path);
    /* First look for our magic string */
    if (!(tmp = strstr(haystack + *offset, needle)))
        return 1;
    tmp += sizeof(needle);
    dev = tmp;

    /*
     * And look for first whitespace character and nul terminate
     * to mark end of the pty path
     */
    while (*tmp) {
        if (c_isspace(*tmp)) {
            if (VIR_STRNDUP(*path, dev, tmp - dev) < 0)
                return -1;

            /* ... now further update offset till we get EOL */
            *offset = tmp - haystack;
            return 0;
        }
        tmp++;
    }

    /*
     * We found a path, but didn't find any whitespace,
     * so it must be still incomplete - we should at
     * least see a \n - indicate that we want to carry
     * on trying again
     */
    return 1;
}

static int
qemuProcessLookupPTYs(virDomainDefPtr def,
                      virQEMUCapsPtr qemuCaps,
                      virDomainChrDefPtr *devices,
                      int count,
                      virHashTablePtr info)
{
    size_t i;

    for (i = 0; i < count; i++) {
        virDomainChrDefPtr chr = devices[i];
        bool chardevfmt = virQEMUCapsSupportsChardev(def, qemuCaps, chr);

        if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY) {
            char id[32];
            qemuMonitorChardevInfoPtr entry;

            if (snprintf(id, sizeof(id), "%s%s",
                         chardevfmt ? "char" : "",
                         chr->info.alias) >= sizeof(id)) {
                virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                               _("failed to format device alias "
                                 "for PTY retrieval"));
                return -1;
            }

            entry = virHashLookup(info, id);
            if (!entry || !entry->ptyPath) {
                if (chr->source.data.file.path == NULL) {
                    /* neither the log output nor 'info chardev' had a
                     * pty path for this chardev, report an error
                     */
                    virReportError(VIR_ERR_INTERNAL_ERROR,
                                   _("no assigned pty for device %s"), id);
                    return -1;
                } else {
                    /* 'info chardev' had no pty path for this chardev,
                     * but the log output had, so we're fine
                     */
                    continue;
                }
            }

            VIR_FREE(chr->source.data.file.path);
            if (VIR_STRDUP(chr->source.data.file.path, entry->ptyPath) < 0)
                return -1;
        }
    }

    return 0;
}

static int
qemuProcessFindCharDevicePTYsMonitor(virDomainObjPtr vm,
                                     virQEMUCapsPtr qemuCaps,
                                     virHashTablePtr info)
{
    size_t i = 0;

    if (qemuProcessLookupPTYs(vm->def, qemuCaps,
                              vm->def->serials, vm->def->nserials,
                              info) < 0)
        return -1;

    if (qemuProcessLookupPTYs(vm->def, qemuCaps,
                              vm->def->parallels, vm->def->nparallels,
                              info) < 0)
        return -1;

    if (qemuProcessLookupPTYs(vm->def, qemuCaps,
                              vm->def->channels, vm->def->nchannels,
                              info) < 0)
        return -1;
    /* For historical reasons, console[0] can be just an alias
     * for serial[0]. That's why we need to update it as well. */
    if (vm->def->nconsoles) {
        virDomainChrDefPtr chr = vm->def->consoles[0];

        if (vm->def->nserials &&
            chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
            chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL) {
            /* yes, the first console is just an alias for serials[0] */
            i = 1;
            if (virDomainChrSourceDefCopy(&chr->source,
                                          &((vm->def->serials[0])->source)) < 0)
                return -1;
        }
    }

    if (qemuProcessLookupPTYs(vm->def, qemuCaps,
                              vm->def->consoles + i, vm->def->nconsoles - i,
                              info) < 0)
        return -1;

    return 0;
}

static int
qemuProcessFindCharDevicePTYs(virDomainObjPtr vm,
                              const char *output,
                              int fd ATTRIBUTE_UNUSED)
{
    size_t offset = 0;
    int ret;
    size_t i;

    /* The order in which QEMU prints out the PTY paths is
       the order in which it procsses its serial and parallel
       device args. This code must match that ordering.... */

    /* first comes the serial devices */
    for (i = 0; i < vm->def->nserials; i++) {
        virDomainChrDefPtr chr = vm->def->serials[i];
        if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY) {
            if ((ret = qemuProcessExtractTTYPath(output, &offset,
                                                 &chr->source.data.file.path)) != 0)
                return ret;
        }
    }

    /* then the parallel devices */
    for (i = 0; i < vm->def->nparallels; i++) {
        virDomainChrDefPtr chr = vm->def->parallels[i];
        if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY) {
            if ((ret = qemuProcessExtractTTYPath(output, &offset,
                                                 &chr->source.data.file.path)) != 0)
                return ret;
        }
    }

    /* then the channel devices */
    for (i = 0; i < vm->def->nchannels; i++) {
        virDomainChrDefPtr chr = vm->def->channels[i];
        if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY) {
            if ((ret = qemuProcessExtractTTYPath(output, &offset,
                                                 &chr->source.data.file.path)) != 0)
                return ret;
        }
    }

    for (i = 0; i < vm->def->nconsoles; i++) {
        virDomainChrDefPtr chr = vm->def->consoles[i];
        /* For historical reasons, console[0] can be just an alias
         * for serial[0]; That's why we need to update it as well */
        if (i == 0 && vm->def->nserials &&
            chr->deviceType == VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE &&
            chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL) {
            if ((ret = virDomainChrSourceDefCopy(&chr->source,
                                                 &((vm->def->serials[0])->source))) != 0)
                return ret;
        } else {
            if (chr->source.type == VIR_DOMAIN_CHR_TYPE_PTY &&
                chr->targetType == VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_VIRTIO) {
                if ((ret = qemuProcessExtractTTYPath(output, &offset,
                                                     &chr->source.data.file.path)) != 0)
                    return ret;
            }
        }
    }

    return 0;
}


static int
qemuProcessRefreshChannelVirtioState(virQEMUDriverPtr driver,
                                     virDomainObjPtr vm,
                                     virHashTablePtr info,
                                     int booted)
{
    size_t i;
    int agentReason = VIR_CONNECT_DOMAIN_EVENT_AGENT_LIFECYCLE_REASON_CHANNEL;
    qemuMonitorChardevInfoPtr entry;
    virObjectEventPtr event = NULL;
    char id[32];

    if (booted)
        agentReason = VIR_CONNECT_DOMAIN_EVENT_AGENT_LIFECYCLE_REASON_DOMAIN_STARTED;

    for (i = 0; i < vm->def->nchannels; i++) {
        virDomainChrDefPtr chr = vm->def->channels[i];
        if (chr->targetType == VIR_DOMAIN_CHR_CHANNEL_TARGET_TYPE_VIRTIO) {
            if (snprintf(id, sizeof(id), "char%s",
                         chr->info.alias) >= sizeof(id)) {
                virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                               _("failed to format device alias "
                                 "for PTY retrieval"));
                return -1;
            }

            /* port state not reported */
            if (!(entry = virHashLookup(info, id)) ||
                !entry->state)
                continue;

            if (entry->state != VIR_DOMAIN_CHR_DEVICE_STATE_DEFAULT &&
                STREQ_NULLABLE(chr->target.name, "org.qemu.guest_agent.0") &&
                (event = virDomainEventAgentLifecycleNewFromObj(vm, entry->state,
                                                                agentReason)))
                qemuDomainEventQueue(driver, event);

            chr->state = entry->state;
        }
    }

    return 0;
}


static int
qemuProcessReconnectRefreshChannelVirtioState(virQEMUDriverPtr driver,
                                              virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virHashTablePtr info = NULL;
    int ret = -1;

    qemuDomainObjEnterMonitor(driver, vm);
    ret = qemuMonitorGetChardevInfo(priv->mon, &info);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        ret = -1;

    if (ret < 0)
        goto cleanup;

    ret = qemuProcessRefreshChannelVirtioState(driver, vm, info, false);

 cleanup:
    virHashFree(info);
    return ret;
}


static int
qemuProcessWaitForMonitor(virQEMUDriverPtr driver,
                          virDomainObjPtr vm,
                          int asyncJob,
                          virQEMUCapsPtr qemuCaps,
                          off_t pos)
{
    char *buf = NULL;
    size_t buf_size = 4096; /* Plenty of space to get startup greeting */
    int logfd = -1;
    int ret = -1;
    virHashTablePtr info = NULL;
    qemuDomainObjPrivatePtr priv;

    if (pos != -1 &&
        (logfd = qemuDomainOpenLog(driver, vm, pos)) < 0)
        return -1;

    if (logfd != -1 && !virQEMUCapsUsedQMP(qemuCaps)) {
        if (VIR_ALLOC_N(buf, buf_size) < 0)
            goto closelog;

        if (qemuProcessReadLogOutput(vm, logfd, buf, buf_size,
                                     qemuProcessFindCharDevicePTYs,
                                     "console", 30) < 0)
            goto closelog;
    }

    VIR_DEBUG("Connect monitor to %p '%s'", vm, vm->def->name);
    if (qemuConnectMonitor(driver, vm, asyncJob, logfd) < 0)
        goto cleanup;

    /* Try to get the pty path mappings again via the monitor. This is much more
     * reliable if it's available.
     * Note that the monitor itself can be on a pty, so we still need to try the
     * log output method. */
    priv = vm->privateData;
    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto cleanup;
    ret = qemuMonitorGetChardevInfo(priv->mon, &info);
    VIR_DEBUG("qemuMonitorGetChardevInfo returned %i", ret);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        ret = -1;

    if (ret == 0) {
        if ((ret = qemuProcessFindCharDevicePTYsMonitor(vm, qemuCaps,
                                                        info)) < 0)
            goto cleanup;

        if ((ret = qemuProcessRefreshChannelVirtioState(driver, vm, info,
                                                        true)) < 0)
            goto cleanup;
    }

 cleanup:
    virHashFree(info);

    if (pos != -1 && kill(vm->pid, 0) == -1 && errno == ESRCH) {
        int len;
        /* VM is dead, any other error raised in the interim is probably
         * not as important as the qemu cmdline output */
        if (virQEMUCapsUsedQMP(qemuCaps)) {
            if (VIR_ALLOC_N(buf, buf_size) < 0)
                goto closelog;
        }

        len = strlen(buf);
        /* best effort seek - we need to reset to the original position, so that
         * a possible read of the fd in the monitor code doesn't influence this
         * error delivery option */
        ignore_value(lseek(logfd, pos, SEEK_SET));
        qemuProcessReadLog(logfd, buf + len, buf_size - len - 1, 0, true);
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("process exited while connecting to monitor: %s"),
                       buf);
        ret = -1;
    }

 closelog:
    if (VIR_CLOSE(logfd) < 0) {
        char ebuf[1024];
        VIR_WARN("Unable to close logfile: %s",
                 virStrerror(errno, ebuf, sizeof(ebuf)));
    }

    VIR_FREE(buf);

    return ret;
}

static int
qemuProcessDetectVcpuPIDs(virQEMUDriverPtr driver,
                          virDomainObjPtr vm, int asyncJob)
{
    pid_t *cpupids = NULL;
    int ncpupids;
    qemuDomainObjPrivatePtr priv = vm->privateData;

    /*
     * Current QEMU *can* report info about host threads mapped
     * to vCPUs, but it is not in a manner we can correctly
     * deal with. The TCG CPU emulation does have a separate vCPU
     * thread, but it runs every vCPU in that same thread. So it
     * is impossible to setup different affinity per thread.
     *
     * What's more the 'query-cpus' command returns bizarre
     * data for the threads. It gives the TCG thread for the
     * vCPU 0, but for vCPUs 1-> N, it actually replies with
     * the main process thread ID.
     *
     * The result is that when we try to set affinity for
     * vCPU 1, it will actually change the affinity of the
     * emulator thread :-( When you try to set affinity for
     * vCPUs 2, 3.... it will fail if the affinity was
     * different from vCPU 1.
     *
     * We *could* allow vcpu pinning with TCG, if we made the
     * restriction that all vCPUs had the same mask. This would
     * at least let us separate emulator from vCPUs threads, as
     * we do for KVM. It would need some changes to our cgroups
     * CPU layout though, and error reporting for the config
     * restrictions.
     *
     * Just disable CPU pinning with TCG until someone wants
     * to try to do this hard work.
     */
    if (vm->def->virtType == VIR_DOMAIN_VIRT_QEMU) {
        priv->nvcpupids = 0;
        priv->vcpupids = NULL;
        return 0;
    }

    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        return -1;
    ncpupids = qemuMonitorGetCPUInfo(priv->mon, &cpupids);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        return -1;
    /* failure to get the VCPU<-> PID mapping or to execute the query
     * command will not be treated fatal as some versions of qemu don't
     * support this command */
    if (ncpupids <= 0) {
        virResetLastError();

        priv->nvcpupids = 0;
        priv->vcpupids = NULL;
        return 0;
    }

    if (ncpupids != vm->def->vcpus) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("got wrong number of vCPU pids from QEMU monitor. "
                         "got %d, wanted %d"),
                       ncpupids, vm->def->vcpus);
        VIR_FREE(cpupids);
        return -1;
    }

    priv->nvcpupids = ncpupids;
    priv->vcpupids = cpupids;
    return 0;
}


static int
qemuProcessDetectIOThreadPIDs(virQEMUDriverPtr driver,
                              virDomainObjPtr vm,
                              int asyncJob)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    qemuMonitorIOThreadsInfoPtr *iothreads = NULL;
    int niothreads = 0;
    int ret = -1;
    size_t i;

    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_OBJECT_IOTHREAD))
        return 0;

    /* Get the list of IOThreads from qemu */
    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto cleanup;
    niothreads = qemuMonitorGetIOThreads(priv->mon, &iothreads);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        goto cleanup;
    if (niothreads < 0)
        goto cleanup;

    /* Nothing to do */
    if (niothreads == 0) {
        ret = 0;
        goto cleanup;
    }

    if (niothreads != vm->def->iothreads) {
        virReportError(VIR_ERR_INTERNAL_ERROR,
                       _("got wrong number of IOThread pids from QEMU monitor. "
                         "got %d, wanted %d"),
                       niothreads, vm->def->iothreads);
        goto cleanup;
    }

    if (VIR_ALLOC_N(priv->iothreadpids, niothreads) < 0)
        goto cleanup;
    priv->niothreadpids = niothreads;

    for (i = 0; i < priv->niothreadpids; i++)
        priv->iothreadpids[i] = iothreads[i]->thread_id;

    ret = 0;

 cleanup:
    if (iothreads) {
        for (i = 0; i < niothreads; i++)
            qemuMonitorIOThreadsInfoFree(iothreads[i]);
        VIR_FREE(iothreads);
    }
    return ret;
}

/* Helper to prepare cpumap for affinity setting, convert
 * NUMA nodeset into cpuset if @nodemask is not NULL, otherwise
 * just return a new allocated bitmap.
 */
virBitmapPtr
qemuPrepareCpumap(virQEMUDriverPtr driver,
                  virBitmapPtr nodemask)
{
    size_t i;
    int hostcpus, maxcpu = QEMUD_CPUMASK_LEN;
    virBitmapPtr cpumap = NULL;
    virCapsPtr caps = NULL;

    /* setaffinity fails if you set bits for CPUs which
     * aren't present, so we have to limit ourselves */
    if ((hostcpus = nodeGetCPUCount()) < 0)
        return NULL;

    if (maxcpu > hostcpus)
        maxcpu = hostcpus;

    if (!(cpumap = virBitmapNew(maxcpu)))
        return NULL;

    if (nodemask) {
        if (!(caps = virQEMUDriverGetCapabilities(driver, false))) {
            virBitmapFree(cpumap);
            cpumap = NULL;
            goto cleanup;
        }

        for (i = 0; i < caps->host.nnumaCell; i++) {
            size_t j;
            int cur_ncpus = caps->host.numaCell[i]->ncpus;
            bool result;
            if (virBitmapGetBit(nodemask, caps->host.numaCell[i]->num, &result) < 0) {
                virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                               _("Failed to convert nodeset to cpuset"));
                virBitmapFree(cpumap);
                cpumap = NULL;
                goto cleanup;
            }
            if (result) {
                for (j = 0; j < cur_ncpus; j++)
                    ignore_value(virBitmapSetBit(cpumap,
                                                 caps->host.numaCell[i]->cpus[j].id));
            }
        }
    }

 cleanup:
    virObjectUnref(caps);
    return cpumap;
}

/*
 * To be run between fork/exec of QEMU only
 */
static int
qemuProcessInitCpuAffinity(virQEMUDriverPtr driver,
                           virDomainObjPtr vm)
{
    int ret = -1;
    virBitmapPtr cpumap = NULL;
    virBitmapPtr cpumapToSet = NULL;
    qemuDomainObjPrivatePtr priv = vm->privateData;

    if (!vm->pid) {
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("Cannot setup CPU affinity until process is started"));
        return -1;
    }

    if (!(cpumap = qemuPrepareCpumap(driver, priv->autoNodeset)))
        return -1;

    if (vm->def->placement_mode == VIR_DOMAIN_CPU_PLACEMENT_MODE_AUTO) {
        VIR_DEBUG("Set CPU affinity with advisory nodeset from numad");
        cpumapToSet = cpumap;
    } else {
        VIR_DEBUG("Set CPU affinity with specified cpuset");
        if (vm->def->cpumask) {
            cpumapToSet = vm->def->cpumask;
        } else {
            cpumapToSet = cpumap;
            /* You may think this is redundant, but we can't assume libvirtd
             * itself is running on all pCPUs, so we need to explicitly set
             * the spawned QEMU instance to all pCPUs if no map is given in
             * its config file */
            virBitmapSetAll(cpumap);
        }
    }

    if (virProcessSetAffinity(vm->pid, cpumapToSet) < 0)
        goto cleanup;

    ret = 0;

 cleanup:
    virBitmapFree(cpumap);
    return ret;
}

/* set link states to down on interfaces at qemu start */
static int
qemuProcessSetLinkStates(virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainDefPtr def = vm->def;
    size_t i;
    int ret = 0;

    for (i = 0; i < def->nnets; i++) {
        if (def->nets[i]->linkstate == VIR_DOMAIN_NET_INTERFACE_LINK_STATE_DOWN) {
            VIR_DEBUG("Setting link state: %s", def->nets[i]->info.alias);

            if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NETDEV)) {
                virReportError(VIR_ERR_OPERATION_UNSUPPORTED, "%s",
                               _("Setting of link state is not supported by this qemu"));
                return -1;
            }

            ret = qemuMonitorSetLink(priv->mon,
                                     def->nets[i]->info.alias,
                                     VIR_DOMAIN_NET_INTERFACE_LINK_STATE_DOWN);
            if (ret != 0) {
                virReportError(VIR_ERR_OPERATION_FAILED,
                               _("Couldn't set link state on interface: %s"), def->nets[i]->info.alias);
                break;
            }
        }
    }

    return ret;
}

/* Set CPU affinities for vcpus if vcpupin xml provided. */
static int
qemuProcessSetVcpuAffinities(virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainDefPtr def = vm->def;
    virDomainVcpuPinDefPtr pininfo;
    int n;
    int ret = -1;
    VIR_DEBUG("Setting affinity on CPUs nvcpupin=%zu nvcpus=%d nvcpupids=%d",
              def->cputune.nvcpupin, def->vcpus, priv->nvcpupids);
    if (!def->cputune.nvcpupin)
        return 0;

    if (priv->vcpupids == NULL) {
        /* If any CPU has custom affinity that differs from the
         * VM default affinity, we must reject it
         */
        for (n = 0; n < def->vcpus; n++) {
            if (!virBitmapEqual(def->cpumask,
                                def->cputune.vcpupin[n]->cpumask)) {
                virReportError(VIR_ERR_OPERATION_INVALID,
                               "%s", _("cpu affinity is not supported"));
                return -1;
            }
        }
        return 0;
    }

    for (n = 0; n < def->vcpus; n++) {
        /* set affinity only for existing vcpus */
        if (!(pininfo = virDomainVcpuPinFindByVcpu(def->cputune.vcpupin,
                                                   def->cputune.nvcpupin,
                                                   n)))
            continue;

        if (virProcessSetAffinity(priv->vcpupids[n],
                                  pininfo->cpumask) < 0) {
            goto cleanup;
        }
    }

    ret = 0;
 cleanup:
    return ret;
}

/* Set CPU affinities for emulator threads. */
static int
qemuProcessSetEmulatorAffinity(virDomainObjPtr vm)
{
    virBitmapPtr cpumask;
    virDomainDefPtr def = vm->def;
    int ret = -1;

    if (def->cputune.emulatorpin)
        cpumask = def->cputune.emulatorpin->cpumask;
    else if (def->cpumask)
        cpumask = def->cpumask;
    else
        return 0;

    ret = virProcessSetAffinity(vm->pid, cpumask);
    return ret;
}

/* Set CPU affinities for IOThreads threads. */
static int
qemuProcessSetIOThreadsAffinity(virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainDefPtr def = vm->def;
    virDomainVcpuPinDefPtr pininfo;
    size_t i;
    int ret = -1;

    if (!def->cputune.niothreadspin)
        return 0;

    if (priv->iothreadpids == NULL) {
        virReportError(VIR_ERR_OPERATION_INVALID,
                       "%s", _("IOThread affinity is not supported"));
        return -1;
    }

    for (i = 0; i < def->iothreads; i++) {
        /* set affinity only for existing vcpus */
        if (!(pininfo = virDomainVcpuPinFindByVcpu(def->cputune.iothreadspin,
                                                   def->cputune.niothreadspin,
                                                   i + 1)))
            continue;

        if (virProcessSetAffinity(priv->iothreadpids[i], pininfo->cpumask) < 0)
            goto cleanup;
    }
    ret = 0;

 cleanup:
    return ret;
}

/* Set Scheduler parameters for vCPU or I/O threads. */
int
qemuProcessSetSchedParams(int id,
                          pid_t pid,
                          size_t nsp,
                          virDomainThreadSchedParamPtr sp)
{
    bool val = false;
    size_t i = 0;
    virDomainThreadSchedParamPtr s = NULL;

    for (i = 0; i < nsp; i++) {
        if (virBitmapGetBit(sp[i].ids, id, &val) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                           _("Cannot get bit from bitmap"));
        }
        if (val) {
            s = &sp[i];
            break;
        }
    }

    if (!s)
        return 0;

    return virProcessSetScheduler(pid, s->scheduler, s->priority);
}

static int
qemuProcessSetSchedulers(virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    size_t i = 0;

    for (i = 0; i < priv->nvcpupids; i++) {
        if (qemuProcessSetSchedParams(i, priv->vcpupids[i],
                                      vm->def->cputune.nvcpusched,
                                      vm->def->cputune.vcpusched) < 0)
            return -1;
    }

    for (i = 0; i < priv->niothreadpids; i++) {
        if (qemuProcessSetSchedParams(i + 1, priv->iothreadpids[i],
                                      vm->def->cputune.niothreadsched,
                                      vm->def->cputune.iothreadsched) < 0)
            return -1;
    }

    return 0;
}

static int
qemuProcessInitPasswords(virConnectPtr conn,
                         virQEMUDriverPtr driver,
                         virDomainObjPtr vm,
                         int asyncJob)
{
    int ret = 0;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
    size_t i;
    char *alias = NULL;
    char *secret = NULL;

    for (i = 0; i < vm->def->ngraphics; ++i) {
        virDomainGraphicsDefPtr graphics = vm->def->graphics[i];
        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC) {
            ret = qemuDomainChangeGraphicsPasswords(driver, vm,
                                                    VIR_DOMAIN_GRAPHICS_TYPE_VNC,
                                                    &graphics->data.vnc.auth,
                                                    cfg->vncPassword,
                                                    asyncJob);
        } else if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
            ret = qemuDomainChangeGraphicsPasswords(driver, vm,
                                                    VIR_DOMAIN_GRAPHICS_TYPE_SPICE,
                                                    &graphics->data.spice.auth,
                                                    cfg->spicePassword,
                                                    asyncJob);
        }

        if (ret < 0)
            goto cleanup;
    }

    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
        for (i = 0; i < vm->def->ndisks; i++) {
            size_t secretLen;

            if (!vm->def->disks[i]->src->encryption ||
                !virDomainDiskGetSource(vm->def->disks[i]))
                continue;

            VIR_FREE(secret);
            if (qemuProcessGetVolumeQcowPassphrase(conn,
                                                   vm->def->disks[i],
                                                   &secret, &secretLen) < 0)
                goto cleanup;

            VIR_FREE(alias);
            if (VIR_STRDUP(alias, vm->def->disks[i]->info.alias) < 0)
                goto cleanup;
            if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
                goto cleanup;
            ret = qemuMonitorSetDrivePassphrase(priv->mon, alias, secret);
            if (qemuDomainObjExitMonitor(driver, vm) < 0)
                ret = -1;
            if (ret < 0)
                goto cleanup;
        }
    }

 cleanup:
    VIR_FREE(alias);
    VIR_FREE(secret);
    virObjectUnref(cfg);
    return ret;
}


#define QEMU_PCI_VENDOR_INTEL     0x8086
#define QEMU_PCI_VENDOR_LSI_LOGIC 0x1000
#define QEMU_PCI_VENDOR_REDHAT    0x1af4
#define QEMU_PCI_VENDOR_CIRRUS    0x1013
#define QEMU_PCI_VENDOR_REALTEK   0x10ec
#define QEMU_PCI_VENDOR_AMD       0x1022
#define QEMU_PCI_VENDOR_ENSONIQ   0x1274
#define QEMU_PCI_VENDOR_VMWARE    0x15ad
#define QEMU_PCI_VENDOR_QEMU      0x1234

#define QEMU_PCI_PRODUCT_DISK_VIRTIO 0x1001

#define QEMU_PCI_PRODUCT_BALLOON_VIRTIO 0x1002

#define QEMU_PCI_PRODUCT_NIC_NE2K     0x8029
#define QEMU_PCI_PRODUCT_NIC_PCNET    0x2000
#define QEMU_PCI_PRODUCT_NIC_RTL8139  0x8139
#define QEMU_PCI_PRODUCT_NIC_E1000    0x100E
#define QEMU_PCI_PRODUCT_NIC_VIRTIO   0x1000

#define QEMU_PCI_PRODUCT_VGA_CIRRUS 0x00b8
#define QEMU_PCI_PRODUCT_VGA_VMWARE 0x0405
#define QEMU_PCI_PRODUCT_VGA_STDVGA 0x1111

#define QEMU_PCI_PRODUCT_AUDIO_AC97    0x2415
#define QEMU_PCI_PRODUCT_AUDIO_ES1370  0x5000

#define QEMU_PCI_PRODUCT_CONTROLLER_PIIX 0x7010
#define QEMU_PCI_PRODUCT_CONTROLLER_LSI  0x0012

#define QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB 0x25ab

static int
qemuProcessAssignNextPCIAddress(virDomainDeviceInfo *info,
                                int vendor,
                                int product,
                                qemuMonitorPCIAddress *addrs,
                                int naddrs)
{
    bool found = false;
    size_t i;

    VIR_DEBUG("Look for %x:%x out of %d", vendor, product, naddrs);

    for (i = 0; i < naddrs; i++) {
        VIR_DEBUG("Maybe %x:%x", addrs[i].vendor, addrs[i].product);
        if (addrs[i].vendor == vendor &&
            addrs[i].product == product) {
            VIR_DEBUG("Match %zu", i);
            found = true;
            break;
        }
    }
    if (!found)
        return -1;

    /* Blank it out so this device isn't matched again */
    addrs[i].vendor = 0;
    addrs[i].product = 0;

    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE)
        info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI;

    if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) {
        info->addr.pci.domain = addrs[i].addr.domain;
        info->addr.pci.bus = addrs[i].addr.bus;
        info->addr.pci.slot = addrs[i].addr.slot;
        info->addr.pci.function = addrs[i].addr.function;
    }

    return 0;
}

static int
qemuProcessGetPCIDiskVendorProduct(virDomainDiskDefPtr def,
                                   unsigned *vendor,
                                   unsigned *product)
{
    switch (def->bus) {
    case VIR_DOMAIN_DISK_BUS_VIRTIO:
        *vendor = QEMU_PCI_VENDOR_REDHAT;
        *product = QEMU_PCI_PRODUCT_DISK_VIRTIO;
        break;

    default:
        return -1;
    }

    return 0;
}

static int
qemuProcessGetPCINetVendorProduct(virDomainNetDefPtr def,
                                  unsigned *vendor,
                                  unsigned *product)
{
    if (!def->model)
        return -1;

    if (STREQ(def->model, "ne2k_pci")) {
        *vendor = QEMU_PCI_VENDOR_REALTEK;
        *product = QEMU_PCI_PRODUCT_NIC_NE2K;
    } else if (STREQ(def->model, "pcnet")) {
        *vendor = QEMU_PCI_VENDOR_AMD;
        *product = QEMU_PCI_PRODUCT_NIC_PCNET;
    } else if (STREQ(def->model, "rtl8139")) {
        *vendor = QEMU_PCI_VENDOR_REALTEK;
        *product = QEMU_PCI_PRODUCT_NIC_RTL8139;
    } else if (STREQ(def->model, "e1000")) {
        *vendor = QEMU_PCI_VENDOR_INTEL;
        *product = QEMU_PCI_PRODUCT_NIC_E1000;
    } else if (STREQ(def->model, "virtio")) {
        *vendor = QEMU_PCI_VENDOR_REDHAT;
        *product = QEMU_PCI_PRODUCT_NIC_VIRTIO;
    } else {
        VIR_INFO("Unexpected NIC model %s, cannot get PCI address",
                 def->model);
        return -1;
    }
    return 0;
}

static int
qemuProcessGetPCIControllerVendorProduct(virDomainControllerDefPtr def,
                                         unsigned *vendor,
                                         unsigned *product)
{
    switch (def->type) {
    case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
        *vendor = QEMU_PCI_VENDOR_LSI_LOGIC;
        *product = QEMU_PCI_PRODUCT_CONTROLLER_LSI;
        break;

    case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
        /* XXX we could put in the ISA bridge address, but
           that's not technically the FDC's address */
        return -1;

    case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
        *vendor = QEMU_PCI_VENDOR_INTEL;
        *product = QEMU_PCI_PRODUCT_CONTROLLER_PIIX;
        break;

    default:
        VIR_INFO("Unexpected controller type %s, cannot get PCI address",
                 virDomainControllerTypeToString(def->type));
        return -1;
    }

    return 0;
}

static int
qemuProcessGetPCIVideoVendorProduct(virDomainVideoDefPtr def,
                                    unsigned *vendor,
                                    unsigned *product)
{
    switch (def->type) {
    case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
        *vendor = QEMU_PCI_VENDOR_CIRRUS;
        *product = QEMU_PCI_PRODUCT_VGA_CIRRUS;
        break;

    case VIR_DOMAIN_VIDEO_TYPE_VGA:
        *vendor = QEMU_PCI_VENDOR_QEMU;
        *product = QEMU_PCI_PRODUCT_VGA_STDVGA;
        break;

    case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
        *vendor = QEMU_PCI_VENDOR_VMWARE;
        *product = QEMU_PCI_PRODUCT_VGA_VMWARE;
        break;

    default:
        return -1;
    }
    return 0;
}

static int
qemuProcessGetPCISoundVendorProduct(virDomainSoundDefPtr def,
                                    unsigned *vendor,
                                    unsigned *product)
{
    switch (def->model) {
    case VIR_DOMAIN_SOUND_MODEL_ES1370:
        *vendor = QEMU_PCI_VENDOR_ENSONIQ;
        *product = QEMU_PCI_PRODUCT_AUDIO_ES1370;
        break;

    case VIR_DOMAIN_SOUND_MODEL_AC97:
        *vendor = QEMU_PCI_VENDOR_INTEL;
        *product = QEMU_PCI_PRODUCT_AUDIO_AC97;
        break;

    default:
        return -1;
    }

    return 0;
}

static int
qemuProcessGetPCIWatchdogVendorProduct(virDomainWatchdogDefPtr def,
                                       unsigned *vendor,
                                       unsigned *product)
{
    switch (def->model) {
    case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB:
        *vendor = QEMU_PCI_VENDOR_INTEL;
        *product = QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB;
        break;

    default:
        return -1;
    }

    return 0;
}


static int
qemuProcessGetPCIMemballoonVendorProduct(virDomainMemballoonDefPtr def,
                                         unsigned *vendor,
                                         unsigned *product)
{
    switch (def->model) {
    case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO:
        *vendor = QEMU_PCI_VENDOR_REDHAT;
        *product = QEMU_PCI_PRODUCT_BALLOON_VIRTIO;
        break;

    default:
        return -1;
    }

    return 0;
}


/*
 * This entire method assumes that PCI devices in 'info pci'
 * match ordering of devices specified on the command line
 * wrt to devices of matching vendor+product
 *
 * XXXX this might not be a valid assumption if we assign
 * some static addrs on CLI. Have to check that...
 */
static int
qemuProcessDetectPCIAddresses(virDomainObjPtr vm,
                              qemuMonitorPCIAddress *addrs,
                              int naddrs)
{
    unsigned int vendor = 0, product = 0;
    size_t i;

    /* XXX should all these vendor/product IDs be kept in the
     * actual device data structure instead ?
     */

    for (i = 0; i < vm->def->ndisks; i++) {
        if (qemuProcessGetPCIDiskVendorProduct(vm->def->disks[i], &vendor, &product) < 0)
            continue;

        if (qemuProcessAssignNextPCIAddress(&(vm->def->disks[i]->info),
                                            vendor, product,
                                            addrs, naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for VirtIO disk %s"),
                           vm->def->disks[i]->dst);
            return -1;
        }
    }

    for (i = 0; i < vm->def->nnets; i++) {
        if (qemuProcessGetPCINetVendorProduct(vm->def->nets[i], &vendor, &product) < 0)
            continue;

        if (qemuProcessAssignNextPCIAddress(&(vm->def->nets[i]->info),
                                            vendor, product,
                                            addrs,  naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for %s NIC"),
                           vm->def->nets[i]->model);
            return -1;
        }
    }

    for (i = 0; i < vm->def->ncontrollers; i++) {
        if (qemuProcessGetPCIControllerVendorProduct(vm->def->controllers[i], &vendor, &product) < 0)
            continue;

        if (qemuProcessAssignNextPCIAddress(&(vm->def->controllers[i]->info),
                                            vendor, product,
                                            addrs,  naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for controller %s"),
                           virDomainControllerTypeToString(vm->def->controllers[i]->type));
            return -1;
        }
    }

    for (i = 0; i < vm->def->nvideos; i++) {
        if (qemuProcessGetPCIVideoVendorProduct(vm->def->videos[i], &vendor, &product) < 0)
            continue;

        if (qemuProcessAssignNextPCIAddress(&(vm->def->videos[i]->info),
                                            vendor, product,
                                            addrs,  naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for video adapter %s"),
                           virDomainVideoTypeToString(vm->def->videos[i]->type));
            return -1;
        }
    }

    for (i = 0; i < vm->def->nsounds; i++) {
        if (qemuProcessGetPCISoundVendorProduct(vm->def->sounds[i], &vendor, &product) < 0)
            continue;

        if (qemuProcessAssignNextPCIAddress(&(vm->def->sounds[i]->info),
                                    vendor, product,
                                     addrs,  naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for sound adapter %s"),
                           virDomainSoundModelTypeToString(vm->def->sounds[i]->model));
            return -1;
        }
    }


    if (vm->def->watchdog &&
        qemuProcessGetPCIWatchdogVendorProduct(vm->def->watchdog, &vendor, &product) == 0) {
        if (qemuProcessAssignNextPCIAddress(&(vm->def->watchdog->info),
                                            vendor, product,
                                            addrs,  naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for watchdog %s"),
                           virDomainWatchdogModelTypeToString(vm->def->watchdog->model));
            return -1;
        }
    }

    if (vm->def->memballoon &&
        qemuProcessGetPCIMemballoonVendorProduct(vm->def->memballoon, &vendor, &product) == 0) {
        if (qemuProcessAssignNextPCIAddress(&(vm->def->memballoon->info),
                                            vendor, product,
                                            addrs, naddrs) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("cannot find PCI address for balloon %s"),
                           virDomainMemballoonModelTypeToString(vm->def->memballoon->model));
            return -1;
        }
    }

    /* XXX console (virtio) */


    /* ... and now things we don't have in our xml */

    /* XXX USB controller ? */

    /* XXX what about other PCI devices (ie bridges) */

    return 0;
}

static int
qemuProcessInitPCIAddresses(virQEMUDriverPtr driver,
                            virDomainObjPtr vm,
                            int asyncJob)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    int naddrs;
    int ret = -1;
    qemuMonitorPCIAddress *addrs = NULL;

    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        return -1;
    naddrs = qemuMonitorGetAllPCIAddresses(priv->mon,
                                           &addrs);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        goto cleanup;

    if (naddrs > 0)
        ret = qemuProcessDetectPCIAddresses(vm, addrs, naddrs);

 cleanup:
    VIR_FREE(addrs);

    return ret;
}


static int
qemuProcessPrepareChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
                                virDomainChrDefPtr dev,
                                void *opaque ATTRIBUTE_UNUSED)
{
    int fd;
    if (dev->source.type != VIR_DOMAIN_CHR_TYPE_FILE)
        return 0;

    if ((fd = open(dev->source.data.file.path,
                   O_CREAT | O_APPEND, S_IRUSR|S_IWUSR)) < 0) {
        virReportSystemError(errno,
                             _("Unable to pre-create chardev file '%s'"),
                             dev->source.data.file.path);
        return -1;
    }

    VIR_FORCE_CLOSE(fd);

    return 0;
}


static int
qemuProcessCleanupChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED,
                                virDomainChrDefPtr dev,
                                void *opaque ATTRIBUTE_UNUSED)
{
    if (dev->source.type == VIR_DOMAIN_CHR_TYPE_UNIX &&
        dev->source.data.nix.listen)
        unlink(dev->source.data.nix.path);

    return 0;
}


/**
 * Loads and update video memory size for video devices according to QEMU
 * process as the QEMU will silently update the values that we pass to QEMU
 * through command line.  We need to load these updated values and store them
 * into the status XML.
 *
 * We will fail if for some reason the values cannot be loaded from QEMU because
 * its mandatory to get the correct video memory size to status XML to not break
 * migration.
 */
static int
qemuProcessUpdateVideoRamSize(virQEMUDriverPtr driver,
                              virDomainObjPtr vm,
                              int asyncJob)
{
    int ret = -1;
    ssize_t i;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainVideoDefPtr video = NULL;
    virQEMUDriverConfigPtr cfg = NULL;

    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        return -1;

    for (i = 0; i < vm->def->nvideos; i++) {
        video = vm->def->videos[i];

        switch (video->type) {
        case VIR_DOMAIN_VIDEO_TYPE_VGA:
            if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VGA_VGAMEM)) {
                if (qemuMonitorUpdateVideoMemorySize(priv->mon, video, "VGA") < 0)
                    goto error;
            }
            break;
        case VIR_DOMAIN_VIDEO_TYPE_QXL:
            if (i == 0) {
                if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_QXL_VGA_VGAMEM)) {
                    if (qemuMonitorUpdateVideoMemorySize(priv->mon, video,
                                                         "qxl-vga") < 0)
                        goto error;
                }
            } else {
                if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_QXL_VGAMEM)) {
                    if (qemuMonitorUpdateVideoMemorySize(priv->mon, video,
                                                         "qxl") < 0)
                        goto error;
                }
            }
            break;
        case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
            if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_VMWARE_SVGA_VGAMEM)) {
                if (qemuMonitorUpdateVideoMemorySize(priv->mon, video,
                                                     "vmware-svga") < 0)
                    goto error;
            }
            break;
        case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
        case VIR_DOMAIN_VIDEO_TYPE_XEN:
        case VIR_DOMAIN_VIDEO_TYPE_VBOX:
        case VIR_DOMAIN_VIDEO_TYPE_LAST:
            break;
        }

    }

    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        return -1;

    cfg = virQEMUDriverGetConfig(driver);
    ret = virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm);
    virObjectUnref(cfg);

    return ret;

 error:
    ignore_value(qemuDomainObjExitMonitor(driver, vm));
    return -1;
}


struct qemuProcessHookData {
    virConnectPtr conn;
    virDomainObjPtr vm;
    virQEMUDriverPtr driver;
    virQEMUDriverConfigPtr cfg;
};

static int qemuProcessHook(void *data)
{
    struct qemuProcessHookData *h = data;
    qemuDomainObjPrivatePtr priv = h->vm->privateData;
    int ret = -1;
    int fd;
    virBitmapPtr nodeset = NULL;
    virDomainNumatuneMemMode mode;

    /* This method cannot use any mutexes, which are not
     * protected across fork()
     */

    virSecurityManagerPostFork(h->driver->securityManager);

    /* Some later calls want pid present */
    h->vm->pid = getpid();

    VIR_DEBUG("Obtaining domain lock");
    /*
     * Since we're going to leak the returned FD to QEMU,
     * we need to make sure it gets a sensible label.
     * This mildly sucks, because there could be other
     * sockets the lock driver opens that we don't want
     * labelled. So far we're ok though.
     */
    if (virSecurityManagerSetSocketLabel(h->driver->securityManager, h->vm->def) < 0)
        goto cleanup;
    if (virDomainLockProcessStart(h->driver->lockManager,
                                  h->cfg->uri,
                                  h->vm,
                                  /* QEMU is always paused initially */
                                  true,
                                  &fd) < 0)
        goto cleanup;
    if (virSecurityManagerClearSocketLabel(h->driver->securityManager, h->vm->def) < 0)
        goto cleanup;

    mode = virDomainNumatuneGetMode(h->vm->def->numa, -1);
    nodeset = virDomainNumatuneGetNodeset(h->vm->def->numa,
                                          priv->autoNodeset, -1);

    if (virNumaSetupMemoryPolicy(mode, nodeset) < 0)
        goto cleanup;

    ret = 0;

 cleanup:
    virObjectUnref(h->cfg);
    VIR_DEBUG("Hook complete ret=%d", ret);
    return ret;
}

int
qemuProcessPrepareMonitorChr(virQEMUDriverConfigPtr cfg,
                             virDomainChrSourceDefPtr monConfig,
                             const char *vm)
{
    monConfig->type = VIR_DOMAIN_CHR_TYPE_UNIX;
    monConfig->data.nix.listen = true;

    if (virAsprintf(&monConfig->data.nix.path, "%s/%s.monitor",
                    cfg->libDir, vm) < 0)
        return -1;
    return 0;
}


/*
 * Precondition: vm must be locked, and a job must be active.
 * This method will call {Enter,Exit}Monitor
 */
int
qemuProcessStartCPUs(virQEMUDriverPtr driver, virDomainObjPtr vm,
                     virConnectPtr conn, virDomainRunningReason reason,
                     qemuDomainAsyncJob asyncJob)
{
    int ret = -1;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    /* Bring up netdevs before starting CPUs */
    if (qemuInterfaceStartDevices(vm->def) < 0)
       goto cleanup;

    VIR_DEBUG("Using lock state '%s'", NULLSTR(priv->lockState));
    if (virDomainLockProcessResume(driver->lockManager, cfg->uri,
                                   vm, priv->lockState) < 0) {
        /* Don't free priv->lockState on error, because we need
         * to make sure we have state still present if the user
         * tries to resume again
         */
        goto cleanup;
    }
    VIR_FREE(priv->lockState);

    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto release;

    ret = qemuMonitorStartCPUs(priv->mon, conn);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        ret = -1;

    if (ret < 0)
        goto release;

    virDomainObjSetState(vm, VIR_DOMAIN_RUNNING, reason);

 cleanup:
    virObjectUnref(cfg);
    return ret;

 release:
    if (virDomainLockProcessPause(driver->lockManager, vm, &priv->lockState) < 0)
        VIR_WARN("Unable to release lease on %s", vm->def->name);
    VIR_DEBUG("Preserving lock state '%s'", NULLSTR(priv->lockState));
    goto cleanup;
}


int qemuProcessStopCPUs(virQEMUDriverPtr driver,
                        virDomainObjPtr vm,
                        virDomainPausedReason reason,
                        qemuDomainAsyncJob asyncJob)
{
    int ret = -1;
    qemuDomainObjPrivatePtr priv = vm->privateData;

    VIR_FREE(priv->lockState);

    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto cleanup;

    ret = qemuMonitorStopCPUs(priv->mon);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        ret = -1;

    if (ret < 0)
        goto cleanup;

    /* de-activate netdevs after stopping CPUs */
    ignore_value(qemuInterfaceStopDevices(vm->def));

    if (priv->job.current)
        ignore_value(virTimeMillisNow(&priv->job.current->stopped));

    virDomainObjSetState(vm, VIR_DOMAIN_PAUSED, reason);
    if (virDomainLockProcessPause(driver->lockManager, vm, &priv->lockState) < 0)
        VIR_WARN("Unable to release lease on %s", vm->def->name);
    VIR_DEBUG("Preserving lock state '%s'", NULLSTR(priv->lockState));

 cleanup:
    return ret;
}



static int
qemuProcessNotifyNets(virDomainDefPtr def)
{
    size_t i;

    for (i = 0; i < def->nnets; i++) {
        virDomainNetDefPtr net = def->nets[i];
        if (networkNotifyActualDevice(def, net) < 0)
            return -1;
    }
    return 0;
}

static int
qemuProcessFiltersInstantiate(virDomainDefPtr def)
{
    size_t i;

    for (i = 0; i < def->nnets; i++) {
        virDomainNetDefPtr net = def->nets[i];
        if ((net->filter) && (net->ifname)) {
            if (virDomainConfNWFilterInstantiate(def->uuid, net) < 0)
                return 1;
        }
    }

    return 0;
}

static int
qemuProcessUpdateState(virQEMUDriverPtr driver, virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainState state;
    virDomainPausedReason reason;
    virDomainState newState = VIR_DOMAIN_NOSTATE;
    int newReason;
    bool running;
    char *msg = NULL;
    int ret;

    qemuDomainObjEnterMonitor(driver, vm);
    ret = qemuMonitorGetStatus(priv->mon, &running, &reason);
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        return -1;

    if (ret < 0)
        return -1;

    state = virDomainObjGetState(vm, NULL);

    if (state == VIR_DOMAIN_PAUSED && running) {
        newState = VIR_DOMAIN_RUNNING;
        newReason = VIR_DOMAIN_RUNNING_UNPAUSED;
        ignore_value(VIR_STRDUP_QUIET(msg, "was unpaused"));
    } else if (state == VIR_DOMAIN_RUNNING && !running) {
        if (reason == VIR_DOMAIN_PAUSED_SHUTTING_DOWN) {
            newState = VIR_DOMAIN_SHUTDOWN;
            newReason = VIR_DOMAIN_SHUTDOWN_UNKNOWN;
            ignore_value(VIR_STRDUP_QUIET(msg, "shutdown"));
        } else if (reason == VIR_DOMAIN_PAUSED_CRASHED) {
            newState = VIR_DOMAIN_CRASHED;
            newReason = VIR_DOMAIN_CRASHED_PANICKED;
            ignore_value(VIR_STRDUP_QUIET(msg, "crashed"));
        } else {
            newState = VIR_DOMAIN_PAUSED;
            newReason = reason;
            ignore_value(virAsprintf(&msg, "was paused (%s)",
                                 virDomainPausedReasonTypeToString(reason)));
        }
    } else if (state == VIR_DOMAIN_SHUTOFF && running) {
        newState = VIR_DOMAIN_RUNNING;
        newReason = VIR_DOMAIN_RUNNING_BOOTED;
        ignore_value(VIR_STRDUP_QUIET(msg, "finished booting"));
    }

    if (newState != VIR_DOMAIN_NOSTATE) {
        VIR_DEBUG("Domain %s %s while its monitor was disconnected;"
                  " changing state to %s (%s)",
                  vm->def->name,
                  NULLSTR(msg),
                  virDomainStateTypeToString(newState),
                  virDomainStateReasonToString(newState, newReason));
        VIR_FREE(msg);
        virDomainObjSetState(vm, newState, newReason);
    }

    return 0;
}

static int
qemuProcessRecoverMigration(virQEMUDriverPtr driver,
                            virDomainObjPtr vm,
                            virConnectPtr conn,
                            qemuDomainAsyncJob job,
                            qemuMigrationJobPhase phase,
                            virDomainState state,
                            int reason)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;

    if (job == QEMU_ASYNC_JOB_MIGRATION_IN) {
        switch (phase) {
        case QEMU_MIGRATION_PHASE_NONE:
        case QEMU_MIGRATION_PHASE_PERFORM2:
        case QEMU_MIGRATION_PHASE_BEGIN3:
        case QEMU_MIGRATION_PHASE_PERFORM3:
        case QEMU_MIGRATION_PHASE_PERFORM3_DONE:
        case QEMU_MIGRATION_PHASE_CONFIRM3_CANCELLED:
        case QEMU_MIGRATION_PHASE_CONFIRM3:
        case QEMU_MIGRATION_PHASE_LAST:
            break;

        case QEMU_MIGRATION_PHASE_PREPARE:
            VIR_DEBUG("Killing unfinished incoming migration for domain %s",
                      vm->def->name);
            return -1;

        case QEMU_MIGRATION_PHASE_FINISH2:
            /* source domain is already killed so let's just resume the domain
             * and hope we are all set */
            VIR_DEBUG("Incoming migration finished, resuming domain %s",
                      vm->def->name);
            if (qemuProcessStartCPUs(driver, vm, conn,
                                     VIR_DOMAIN_RUNNING_UNPAUSED,
                                     QEMU_ASYNC_JOB_NONE) < 0) {
                VIR_WARN("Could not resume domain %s", vm->def->name);
            }
            break;

        case QEMU_MIGRATION_PHASE_FINISH3:
            /* migration finished, we started resuming the domain but didn't
             * confirm success or failure yet; killing it seems safest */
            VIR_DEBUG("Killing migrated domain %s", vm->def->name);
            return -1;
        }
    } else if (job == QEMU_ASYNC_JOB_MIGRATION_OUT) {
        switch (phase) {
        case QEMU_MIGRATION_PHASE_NONE:
        case QEMU_MIGRATION_PHASE_PREPARE:
        case QEMU_MIGRATION_PHASE_FINISH2:
        case QEMU_MIGRATION_PHASE_FINISH3:
        case QEMU_MIGRATION_PHASE_LAST:
            break;

        case QEMU_MIGRATION_PHASE_BEGIN3:
            /* nothing happen so far, just forget we were about to migrate the
             * domain */
            break;

        case QEMU_MIGRATION_PHASE_PERFORM2:
        case QEMU_MIGRATION_PHASE_PERFORM3:
            /* migration is still in progress, let's cancel it and resume the
             * domain */
            VIR_DEBUG("Canceling unfinished outgoing migration of domain %s",
                      vm->def->name);
            qemuDomainObjEnterMonitor(driver, vm);
            ignore_value(qemuMonitorMigrateCancel(priv->mon));
            if (qemuDomainObjExitMonitor(driver, vm) < 0)
                return -1;
            /* resume the domain but only if it was paused as a result of
             * migration */
            if (state == VIR_DOMAIN_PAUSED &&
                (reason == VIR_DOMAIN_PAUSED_MIGRATION ||
                 reason == VIR_DOMAIN_PAUSED_UNKNOWN)) {
                if (qemuProcessStartCPUs(driver, vm, conn,
                                         VIR_DOMAIN_RUNNING_UNPAUSED,
                                         QEMU_ASYNC_JOB_NONE) < 0) {
                    VIR_WARN("Could not resume domain %s", vm->def->name);
                }
            }
            break;

        case QEMU_MIGRATION_PHASE_PERFORM3_DONE:
            /* migration finished but we didn't have a chance to get the result
             * of Finish3 step; third party needs to check what to do next
             */
            break;

        case QEMU_MIGRATION_PHASE_CONFIRM3_CANCELLED:
            /* Finish3 failed, we need to resume the domain */
            VIR_DEBUG("Resuming domain %s after failed migration",
                      vm->def->name);
            if (state == VIR_DOMAIN_PAUSED &&
                (reason == VIR_DOMAIN_PAUSED_MIGRATION ||
                 reason == VIR_DOMAIN_PAUSED_UNKNOWN)) {
                if (qemuProcessStartCPUs(driver, vm, conn,
                                         VIR_DOMAIN_RUNNING_UNPAUSED,
                                         QEMU_ASYNC_JOB_NONE) < 0) {
                    VIR_WARN("Could not resume domain %s", vm->def->name);
                }
            }
            break;

        case QEMU_MIGRATION_PHASE_CONFIRM3:
            /* migration completed, we need to kill the domain here */
            return -1;
        }
    }

    return 0;
}

static int
qemuProcessRecoverJob(virQEMUDriverPtr driver,
                      virDomainObjPtr vm,
                      virConnectPtr conn,
                      const struct qemuDomainJobObj *job)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainState state;
    int reason;

    state = virDomainObjGetState(vm, &reason);

    switch (job->asyncJob) {
    case QEMU_ASYNC_JOB_MIGRATION_OUT:
    case QEMU_ASYNC_JOB_MIGRATION_IN:
        if (qemuProcessRecoverMigration(driver, vm, conn, job->asyncJob,
                                        job->phase, state, reason) < 0)
            return -1;
        break;

    case QEMU_ASYNC_JOB_SAVE:
    case QEMU_ASYNC_JOB_DUMP:
    case QEMU_ASYNC_JOB_SNAPSHOT:
        qemuDomainObjEnterMonitor(driver, vm);
        ignore_value(qemuMonitorMigrateCancel(priv->mon));
        if (qemuDomainObjExitMonitor(driver, vm) < 0)
            return -1;
        /* resume the domain but only if it was paused as a result of
         * running a migration-to-file operation.  Although we are
         * recovering an async job, this function is run at startup
         * and must resume things using sync monitor connections.  */
         if (state == VIR_DOMAIN_PAUSED &&
             ((job->asyncJob == QEMU_ASYNC_JOB_DUMP &&
               reason == VIR_DOMAIN_PAUSED_DUMP) ||
              (job->asyncJob == QEMU_ASYNC_JOB_SAVE &&
               reason == VIR_DOMAIN_PAUSED_SAVE) ||
              (job->asyncJob == QEMU_ASYNC_JOB_SNAPSHOT &&
               reason == VIR_DOMAIN_PAUSED_SNAPSHOT) ||
              reason == VIR_DOMAIN_PAUSED_UNKNOWN)) {
             if (qemuProcessStartCPUs(driver, vm, conn,
                                      VIR_DOMAIN_RUNNING_UNPAUSED,
                                      QEMU_ASYNC_JOB_NONE) < 0) {
                 VIR_WARN("Could not resume domain '%s' after migration to file",
                          vm->def->name);
            }
        }
        break;

    case QEMU_ASYNC_JOB_NONE:
    case QEMU_ASYNC_JOB_LAST:
        break;
    }

    if (!virDomainObjIsActive(vm))
        return -1;

    /* In case any special handling is added for job type that has been ignored
     * before, QEMU_DOMAIN_TRACK_JOBS (from qemu_domain.h) needs to be updated
     * for the job to be properly tracked in domain state XML.
     */
    switch (job->active) {
    case QEMU_JOB_QUERY:
        /* harmless */
        break;

    case QEMU_JOB_DESTROY:
        VIR_DEBUG("Domain %s should have already been destroyed",
                  vm->def->name);
        return -1;

    case QEMU_JOB_SUSPEND:
        /* mostly harmless */
        break;

    case QEMU_JOB_MODIFY:
        /* XXX depending on the command we may be in an inconsistent state and
         * we should probably fall back to "monitor error" state and refuse to
         */
        break;

    case QEMU_JOB_MIGRATION_OP:
    case QEMU_JOB_ABORT:
    case QEMU_JOB_ASYNC:
    case QEMU_JOB_ASYNC_NESTED:
        /* async job was already handled above */
    case QEMU_JOB_NONE:
    case QEMU_JOB_LAST:
        break;
    }

    return 0;
}

static int
qemuProcessUpdateDevices(virQEMUDriverPtr driver,
                         virDomainObjPtr vm)
{
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virDomainDeviceDef dev;
    char **old;
    char **tmp;
    int ret = -1;

    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE_DEL_EVENT))
        return 0;

    old = priv->qemuDevices;
    priv->qemuDevices = NULL;
    if (qemuDomainUpdateDeviceList(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
        goto cleanup;

    if ((tmp = old)) {
        while (*tmp) {
            if (!virStringArrayHasString(priv->qemuDevices, *tmp) &&
                virDomainDefFindDevice(vm->def, *tmp, &dev, false) == 0 &&
                qemuDomainRemoveDevice(driver, vm, &dev) < 0) {
                goto cleanup;
            }
            tmp++;
        }
    }
    ret = 0;

 cleanup:
    virStringFreeList(old);
    return ret;
}

struct qemuProcessReconnectData {
    virConnectPtr conn;
    virQEMUDriverPtr driver;
    virDomainObjPtr obj;
};
/*
 * Open an existing VM's monitor, re-detect VCPU threads
 * and re-reserve the security labels in use
 *
 * We own the virConnectPtr we are passed here - whoever started
 * this thread function has increased the reference counter to it
 * so that we now have to close it.
 *
 * This function also inherits a locked and ref'd domain object.
 *
 * This function needs to:
 * 1. Enter job
 * 1. just before monitor reconnect do lightweight MonitorEnter
 *    (increase VM refcount and unlock VM)
 * 2. reconnect to monitor
 * 3. do lightweight MonitorExit (lock VM)
 * 4. continue reconnect process
 * 5. EndJob
 *
 * We can't do normal MonitorEnter & MonitorExit because these two lock the
 * monitor lock, which does not exists in this early phase.
 */
static void
qemuProcessReconnect(void *opaque)
{
    struct qemuProcessReconnectData *data = opaque;
    virQEMUDriverPtr driver = data->driver;
    virDomainObjPtr obj = data->obj;
    qemuDomainObjPrivatePtr priv;
    virConnectPtr conn = data->conn;
    struct qemuDomainJobObj oldjob;
    int state;
    int reason;
    virQEMUDriverConfigPtr cfg;
    size_t i;
    int ret;

    VIR_FREE(data);

    qemuDomainObjRestoreJob(obj, &oldjob);

    cfg = virQEMUDriverGetConfig(driver);
    priv = obj->privateData;

    if (qemuDomainObjBeginJob(driver, obj, QEMU_JOB_MODIFY) < 0)
        goto killvm;

    virNWFilterReadLockFilterUpdates();

    VIR_DEBUG("Reconnect monitor to %p '%s'", obj, obj->def->name);

    /* XXX check PID liveliness & EXE path */
    if (qemuConnectMonitor(driver, obj, QEMU_ASYNC_JOB_NONE, -1) < 0)
        goto error;

    /* Failure to connect to agent shouldn't be fatal */
    if ((ret = qemuConnectAgent(driver, obj)) < 0) {
        if (ret == -2)
            goto error;

        VIR_WARN("Cannot connect to QEMU guest agent for %s",
                 obj->def->name);
        virResetLastError();
        priv->agentError = true;
    }

    if (qemuUpdateActivePCIHostdevs(driver, obj->def) < 0)
        goto error;

    if (qemuUpdateActiveUSBHostdevs(driver, obj->def) < 0)
        goto error;

    if (qemuUpdateActiveSCSIHostdevs(driver, obj->def) < 0)
        goto error;

    if (qemuConnectCgroup(driver, obj) < 0)
        goto error;

    /* XXX: Need to change as long as lock is introduced for
     * qemu_driver->sharedDevices.
     */
    for (i = 0; i < obj->def->ndisks; i++) {
        virDomainDeviceDef dev;

        if (virStorageTranslateDiskSourcePool(conn, obj->def->disks[i]) < 0)
            goto error;

        /* XXX we should be able to restore all data from XML in the future.
         * This should be the only place that calls qemuDomainDetermineDiskChain
         * with @report_broken == false to guarantee best-effort domain
         * reconnect */
        if (qemuDomainDetermineDiskChain(driver, obj, obj->def->disks[i],
                                         true, false) < 0)
            goto error;

        dev.type = VIR_DOMAIN_DEVICE_DISK;
        dev.data.disk = obj->def->disks[i];
        if (qemuAddSharedDevice(driver, &dev, obj->def->name) < 0)
            goto error;
    }

    if (qemuProcessUpdateState(driver, obj) < 0)
        goto error;

    state = virDomainObjGetState(obj, &reason);
    if (state == VIR_DOMAIN_SHUTOFF) {
        VIR_DEBUG("Domain '%s' wasn't fully started yet, killing it",
                  obj->def->name);
        goto error;
    }

    /* If upgrading from old libvirtd we won't have found any
     * caps in the domain status, so re-query them
     */
    if (!priv->qemuCaps &&
        !(priv->qemuCaps = virQEMUCapsCacheLookupCopy(driver->qemuCapsCache,
                                                      obj->def->emulator,
                                                      obj->def->os.machine)))
        goto error;

    /* In case the domain shutdown while we were not running,
     * we need to finish the shutdown process. And we need to do it after
     * we have virQEMUCaps filled in.
     */
    if (state == VIR_DOMAIN_SHUTDOWN ||
        (state == VIR_DOMAIN_PAUSED &&
         reason == VIR_DOMAIN_PAUSED_SHUTTING_DOWN)) {
        VIR_DEBUG("Finishing shutdown sequence for domain %s",
                  obj->def->name);
        qemuProcessShutdownOrReboot(driver, obj);
        qemuDomainObjEndJob(driver, obj);
        goto cleanup;
    }

    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE))
        if ((qemuDomainAssignAddresses(obj->def, priv->qemuCaps, obj)) < 0)
            goto error;

    if (virSecurityManagerReserveLabel(driver->securityManager, obj->def, obj->pid) < 0)
        goto error;

    if (qemuProcessNotifyNets(obj->def) < 0)
        goto error;

    if (qemuProcessFiltersInstantiate(obj->def))
        goto error;

    if (qemuDomainCheckEjectableMedia(driver, obj, QEMU_ASYNC_JOB_NONE) < 0)
        goto error;

    if (qemuProcessReconnectRefreshChannelVirtioState(driver, obj) < 0)
        goto error;

    if (qemuProcessRecoverJob(driver, obj, conn, &oldjob) < 0)
        goto error;

    if (qemuProcessUpdateDevices(driver, obj) < 0)
        goto error;

    /* update domain state XML with possibly updated state in virDomainObj */
    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, obj) < 0)
        goto error;

    /* Run an hook to allow admins to do some magic */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, obj->def, 0);
        int hookret;

        hookret = virHookCall(VIR_HOOK_DRIVER_QEMU, obj->def->name,
                              VIR_HOOK_QEMU_OP_RECONNECT, VIR_HOOK_SUBOP_BEGIN,
                              NULL, xml, NULL);
        VIR_FREE(xml);

        /*
         * If the script raised an error abort the launch
         */
        if (hookret < 0)
            goto error;
    }

    if (virAtomicIntInc(&driver->nactive) == 1 && driver->inhibitCallback)
        driver->inhibitCallback(true, driver->inhibitOpaque);

    qemuDomainObjEndJob(driver, obj);
    goto cleanup;

 error:
    qemuDomainObjEndJob(driver, obj);
 killvm:
    if (virDomainObjIsActive(obj)) {
        /* We can't get the monitor back, so must kill the VM
         * to remove danger of it ending up running twice if
         * user tries to start it again later
         */
        if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_NO_SHUTDOWN)) {
            /* If we couldn't get the monitor and qemu supports
             * no-shutdown, we can safely say that the domain
             * crashed ... */
            state = VIR_DOMAIN_SHUTOFF_CRASHED;
        } else {
            /* ... but if it doesn't we can't say what the state
             * really is and FAILED means "failed to start" */
            state = VIR_DOMAIN_SHUTOFF_UNKNOWN;
        }
        qemuProcessStop(driver, obj, state, 0);
    }

    if (!obj->persistent)
        qemuDomainRemoveInactive(driver, obj);

 cleanup:
    qemuDomObjEndAPI(&obj);
    virObjectUnref(conn);
    virObjectUnref(cfg);
    virNWFilterUnlockFilterUpdates();
}

static int
qemuProcessReconnectHelper(virDomainObjPtr obj,
                           void *opaque)
{
    virThread thread;
    struct qemuProcessReconnectData *src = opaque;
    struct qemuProcessReconnectData *data;

    /* If the VM was inactive, we don't need to reconnect */
    if (!obj->pid)
        return 0;

    if (VIR_ALLOC(data) < 0)
        return -1;

    memcpy(data, src, sizeof(*data));
    data->obj = obj;

    /* this lock and reference will be eventually transferred to the thread
     * that handles the reconnect */
    virObjectLock(obj);
    virObjectRef(obj);

    /* Since we close the connection later on, we have to make sure that the
     * threads we start see a valid connection throughout their lifetime. We
     * simply increase the reference counter here.
     */
    virObjectRef(data->conn);

    if (virThreadCreate(&thread, false, qemuProcessReconnect, data) < 0) {
        virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
                       _("Could not create thread. QEMU initialization "
                         "might be incomplete"));
       /* We can't spawn a thread and thus connect to monitor. Kill qemu. */
        qemuProcessStop(src->driver, obj, VIR_DOMAIN_SHUTOFF_FAILED, 0);
        if (!obj->persistent)
            qemuDomainRemoveInactive(src->driver, obj);

        qemuDomObjEndAPI(&obj);
        virObjectUnref(data->conn);
        VIR_FREE(data);
        return -1;
    }

    return 0;
}

/**
 * qemuProcessReconnectAll
 *
 * Try to re-open the resources for live VMs that we care
 * about.
 */
void
qemuProcessReconnectAll(virConnectPtr conn, virQEMUDriverPtr driver)
{
    struct qemuProcessReconnectData data = {.conn = conn, .driver = driver};
    virDomainObjListForEach(driver->domains, qemuProcessReconnectHelper, &data);
}

static int
qemuProcessVNCAllocatePorts(virQEMUDriverPtr driver,
                            virDomainGraphicsDefPtr graphics)
{
    unsigned short port;

    if (graphics->data.vnc.socket)
        return 0;

    if (graphics->data.vnc.autoport) {
        if (virPortAllocatorAcquire(driver->remotePorts, &port) < 0)
            return -1;
        graphics->data.vnc.port = port;
    }

    if (graphics->data.vnc.websocket == -1) {
        if (virPortAllocatorAcquire(driver->webSocketPorts, &port) < 0)
            return -1;
        graphics->data.vnc.websocket = port;
    }

    return 0;
}

static int
qemuProcessSPICEAllocatePorts(virQEMUDriverPtr driver,
                              virQEMUDriverConfigPtr cfg,
                              virDomainGraphicsDefPtr graphics)
{
    unsigned short port = 0;
    unsigned short tlsPort;
    size_t i;
    int defaultMode = graphics->data.spice.defaultMode;

    bool needTLSPort = false;
    bool needPort = false;

    if (graphics->data.spice.autoport) {
        /* check if tlsPort or port need allocation */
        for (i = 0; i < VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_LAST; i++) {
            switch (graphics->data.spice.channels[i]) {
            case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_SECURE:
                needTLSPort = true;
                break;

            case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_INSECURE:
                needPort = true;
                break;

            case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_ANY:
                switch (defaultMode) {
                case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_SECURE:
                    needTLSPort = true;
                    break;

                case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_INSECURE:
                    needPort = true;
                    break;

                case VIR_DOMAIN_GRAPHICS_SPICE_CHANNEL_MODE_ANY:
                    if (cfg->spiceTLS)
                        needTLSPort = true;
                    needPort = true;
                    break;
                }
                break;
            }
        }
    }

    if (needPort || graphics->data.spice.port == -1) {
        if (virPortAllocatorAcquire(driver->remotePorts, &port) < 0)
            goto error;

        graphics->data.spice.port = port;
    }

    if (needTLSPort || graphics->data.spice.tlsPort == -1) {
        if (!cfg->spiceTLS) {
            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                           _("Auto allocation of spice TLS port requested "
                             "but spice TLS is disabled in qemu.conf"));
            goto error;
        }

        if (virPortAllocatorAcquire(driver->remotePorts, &tlsPort) < 0)
            goto error;

        graphics->data.spice.tlsPort = tlsPort;
    }

    return 0;

 error:
    virPortAllocatorRelease(driver->remotePorts, port);
    return -1;
}


static bool
qemuValidateCpuMax(virDomainDefPtr def, virQEMUCapsPtr qemuCaps)
{
    unsigned int maxCpus;

    maxCpus = virQEMUCapsGetMachineMaxCpus(qemuCaps, def->os.machine);
    if (!maxCpus)
        return true;

    if (def->maxvcpus > maxCpus) {
        virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
                       "%s", _("Maximum CPUs greater than specified machine type limit"));
        return false;
    }

    return true;
}


static bool
qemuProcessVerifyGuestCPU(virQEMUDriverPtr driver,
                          virDomainObjPtr vm,
                          int asyncJob)
{
    virDomainDefPtr def = vm->def;
    virArch arch = def->os.arch;
    virCPUDataPtr guestcpu = NULL;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    int rc;
    bool ret = false;
    size_t i;

    /* no features are passed to QEMU with -cpu host
     * so it makes no sense to verify them */
    if (def->cpu && def->cpu->mode == VIR_CPU_MODE_HOST_PASSTHROUGH)
        return true;

    switch (arch) {
    case VIR_ARCH_I686:
    case VIR_ARCH_X86_64:
        if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
            return false;
        rc = qemuMonitorGetGuestCPU(priv->mon, arch, &guestcpu);
        if (qemuDomainObjExitMonitor(driver, vm) < 0)
            return false;

        if (rc < 0) {
            if (rc == -2)
                break;

            goto cleanup;
        }

        if (def->features[VIR_DOMAIN_FEATURE_PVSPINLOCK] == VIR_TRISTATE_SWITCH_ON) {
            if (!cpuHasFeature(guestcpu, VIR_CPU_x86_KVM_PV_UNHALT)) {
                virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                               _("host doesn't support paravirtual spinlocks"));
                goto cleanup;
            }
        }

        for (i = 0; def->cpu && i < def->cpu->nfeatures; i++) {
            virCPUFeatureDefPtr feature = &def->cpu->features[i];

            if (feature->policy != VIR_CPU_FEATURE_REQUIRE)
                continue;

            if (STREQ(feature->name, "invtsc") &&
                !cpuHasFeature(guestcpu, feature->name)) {
                virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                               _("host doesn't support invariant TSC"));
                goto cleanup;
            }
        }
        break;

    default:
        break;
    }

    ret = true;

 cleanup:
    cpuDataFree(guestcpu);
    return ret;
}


static int
qemuPrepareNVRAM(virQEMUDriverConfigPtr cfg,
                 virDomainObjPtr vm,
                 bool migrated)
{
    int ret = -1;
    int srcFD = -1;
    int dstFD = -1;
    virDomainLoaderDefPtr loader = vm->def->os.loader;
    bool generated = false;
    bool created = false;

    /* Unless domain has RO loader of pflash type, we have
     * nothing to do here.  If the loader is RW then it's not
     * using split code and vars feature, so no nvram file needs
     * to be created. */
    if (!loader || loader->type != VIR_DOMAIN_LOADER_TYPE_PFLASH ||
        loader->readonly != VIR_TRISTATE_SWITCH_ON)
        return 0;

    /* If the nvram path is configured already, there's nothing
     * we need to do. Unless we are starting the destination side
     * of migration in which case nvram is configured in the
     * domain XML but the file doesn't exist yet. Moreover, after
     * the migration is completed, qemu will invoke a
     * synchronization write into the nvram file so we don't have
     * to take care about transmitting the real data on the other
     * side. */
    if (loader->nvram && !migrated)
        return 0;

    /* Autogenerate nvram path if needed.*/
    if (!loader->nvram) {
        if (virAsprintf(&loader->nvram,
                        "%s/lib/libvirt/qemu/nvram/%s_VARS.fd",
                        LOCALSTATEDIR, vm->def->name) < 0)
            goto cleanup;

        generated = true;

        if (vm->persistent &&
            virDomainSaveConfig(cfg->configDir, vm->def) < 0)
            goto cleanup;
    }

    if (!virFileExists(loader->nvram)) {
        const char *master_nvram_path = loader->templt;
        ssize_t r;

        if (!loader->templt) {
            size_t i;
            for (i = 0; i < cfg->nloader; i++) {
                if (STREQ(cfg->loader[i], loader->path)) {
                    master_nvram_path = cfg->nvram[i];
                    break;
                }
            }
        }

        if (!master_nvram_path) {
            virReportError(VIR_ERR_OPERATION_FAILED,
                           _("unable to find any master var store for "
                             "loader: %s"), loader->path);
            goto cleanup;
        }

        if ((srcFD = virFileOpenAs(master_nvram_path, O_RDONLY,
                                   0, -1, -1, 0)) < 0) {
            virReportSystemError(-srcFD,
                                 _("Failed to open file '%s'"),
                                 master_nvram_path);
            goto cleanup;
        }
        if ((dstFD = virFileOpenAs(loader->nvram,
                                   O_WRONLY | O_CREAT | O_EXCL,
                                   S_IRUSR | S_IWUSR,
                                   cfg->user, cfg->group, 0)) < 0) {
            virReportSystemError(-dstFD,
                                 _("Failed to create file '%s'"),
                                 loader->nvram);
            goto cleanup;
        }
        created = true;

        do {
            char buf[1024];

            if ((r = saferead(srcFD, buf, sizeof(buf))) < 0) {
                virReportSystemError(errno,
                                     _("Unable to read from file '%s'"),
                                     master_nvram_path);
                goto cleanup;
            }

            if (safewrite(dstFD, buf, r) < 0) {
                virReportSystemError(errno,
                                     _("Unable to write to file '%s'"),
                                     loader->nvram);
                goto cleanup;
            }
        } while (r);

        if (VIR_CLOSE(srcFD) < 0) {
            virReportSystemError(errno,
                                 _("Unable to close file '%s'"),
                                 master_nvram_path);
            goto cleanup;
        }
        if (VIR_CLOSE(dstFD) < 0) {
            virReportSystemError(errno,
                                 _("Unable to close file '%s'"),
                                 loader->nvram);
            goto cleanup;
        }
    }

    ret = 0;
 cleanup:
    /* We successfully generated the nvram path, but failed to
     * copy the file content. Roll back. */
    if (ret < 0) {
        if (created)
            unlink(loader->nvram);
        if (generated)
            VIR_FREE(loader->nvram);
    }

    VIR_FORCE_CLOSE(srcFD);
    VIR_FORCE_CLOSE(dstFD);
    return ret;
}


static void
qemuLogOperation(virDomainObjPtr vm,
                 const char *msg,
                 int logfd,
                 virCommandPtr cmd)
{
    char *timestamp;
    char *logline;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    int qemuVersion = virQEMUCapsGetVersion(priv->qemuCaps);
    const char *package = virQEMUCapsGetPackage(priv->qemuCaps);
    char ebuf[1024];

    if ((timestamp = virTimeStringNow()) == NULL)
        goto error;

    if (virAsprintf(&logline, "%s: %s %s, qemu version: %d.%d.%d%s\n",
                    timestamp, msg, VIR_LOG_VERSION_STRING,
                    (qemuVersion / 1000000) % 1000, (qemuVersion / 1000) % 1000, qemuVersion % 1000,
                    package ? package : "") < 0)
        goto error;

    if (safewrite(logfd, logline, strlen(logline)) < 0)
        goto error;

    if (cmd)
        virCommandWriteArgLog(cmd, logfd);

 cleanup:
    VIR_FREE(timestamp);
    VIR_FREE(logline);
    return;

 error:
    VIR_WARN("Unable to write banner to logfile: %s",
             virStrerror(errno, ebuf, sizeof(ebuf)));
    goto cleanup;
}

int qemuProcessStart(virConnectPtr conn,
                     virQEMUDriverPtr driver,
                     virDomainObjPtr vm,
                     int asyncJob,
                     const char *migrateFrom,
                     int stdin_fd,
                     const char *stdin_path,
                     virDomainSnapshotObjPtr snapshot,
                     virNetDevVPortProfileOp vmop,
                     unsigned int flags)
{
    int ret;
    off_t pos = -1;
    char ebuf[1024];
    int logfile = -1;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virCommandPtr cmd = NULL;
    struct qemuProcessHookData hookData;
    unsigned long cur_balloon;
    unsigned int period = 0;
    size_t i;
    bool rawio_set = false;
    char *nodeset = NULL;
    virBitmapPtr nodemask = NULL;
    unsigned int stop_flags;
    virQEMUDriverConfigPtr cfg;
    virCapsPtr caps = NULL;
    unsigned int hostdev_flags = 0;
    size_t nnicindexes = 0;
    int *nicindexes = NULL;

    VIR_DEBUG("vm=%p name=%s id=%d pid=%llu",
              vm, vm->def->name, vm->def->id,
              (unsigned long long)vm->pid);

    /* Okay, these are just internal flags,
     * but doesn't hurt to check */
    virCheckFlags(VIR_QEMU_PROCESS_START_COLD |
                  VIR_QEMU_PROCESS_START_PAUSED |
                  VIR_QEMU_PROCESS_START_AUTODESTROY, -1);

    cfg = virQEMUDriverGetConfig(driver);

    /* From now on until domain security labeling is done:
     * if any operation fails and we goto cleanup, we must not
     * restore any security label as we would overwrite labels
     * we did not set. */
    stop_flags = VIR_QEMU_PROCESS_STOP_NO_RELABEL;
    /* If we fail while doing incoming migration, then we must not
     * relabel, as the source is still using the files.  */
    if (migrateFrom)
        stop_flags |= VIR_QEMU_PROCESS_STOP_MIGRATED;

    hookData.conn = conn;
    hookData.vm = vm;
    hookData.driver = driver;
    /* We don't increase cfg's reference counter here. */
    hookData.cfg = cfg;

    VIR_DEBUG("Beginning VM startup process");

    if (virDomainObjIsActive(vm)) {
        virReportError(VIR_ERR_OPERATION_INVALID,
                       "%s", _("VM is already active"));
        virObjectUnref(cfg);
        return -1;
    }

    if (!(caps = virQEMUDriverGetCapabilities(driver, false)))
        goto cleanup;

    /* Some things, paths, ... are generated here and we want them to persist.
     * Fill them in prior to setting the domain def as transient. */
    VIR_DEBUG("Generating paths");

    if (qemuPrepareNVRAM(cfg, vm, migrateFrom) < 0)
        goto cleanup;

    /* Do this upfront, so any part of the startup process can add
     * runtime state to vm->def that won't be persisted. This let's us
     * report implicit runtime defaults in the XML, like vnc listen/socket
     */
    VIR_DEBUG("Setting current domain def as transient");
    if (virDomainObjSetDefTransient(caps, driver->xmlopt, vm, true) < 0)
        goto cleanup;

    vm->def->id = qemuDriverAllocateID(driver);
    qemuDomainSetFakeReboot(driver, vm, false);
    virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, VIR_DOMAIN_SHUTOFF_UNKNOWN);

    if (virAtomicIntInc(&driver->nactive) == 1 && driver->inhibitCallback)
        driver->inhibitCallback(true, driver->inhibitOpaque);

    /* Run an early hook to set-up missing devices */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);
        int hookret;

        hookret = virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                              VIR_HOOK_QEMU_OP_PREPARE, VIR_HOOK_SUBOP_BEGIN,
                              NULL, xml, NULL);
        VIR_FREE(xml);

        /*
         * If the script raised an error abort the launch
         */
        if (hookret < 0)
            goto cleanup;
    }

    VIR_DEBUG("Determining emulator version");
    virObjectUnref(priv->qemuCaps);
    if (!(priv->qemuCaps = virQEMUCapsCacheLookupCopy(driver->qemuCapsCache,
                                                      vm->def->emulator,
                                                      vm->def->os.machine)))
        goto cleanup;

    /* network devices must be "prepared" before hostdevs, because
     * setting up a network device might create a new hostdev that
     * will need to be setup.
     */
    VIR_DEBUG("Preparing network devices");
    if (qemuNetworkPrepareDevices(vm->def) < 0)
       goto cleanup;

    /* Must be run before security labelling */
    VIR_DEBUG("Preparing host devices");
    if (!cfg->relaxedACS)
        hostdev_flags |= VIR_HOSTDEV_STRICT_ACS_CHECK;
    if (!migrateFrom)
        hostdev_flags |= VIR_HOSTDEV_COLD_BOOT;
    if (qemuPrepareHostDevices(driver, vm->def, priv->qemuCaps,
                               hostdev_flags) < 0)
        goto cleanup;

    VIR_DEBUG("Preparing chr devices");
    if (virDomainChrDefForeach(vm->def,
                               true,
                               qemuProcessPrepareChardevDevice,
                               NULL) < 0)
        goto cleanup;

    VIR_DEBUG("Checking domain and device security labels");
    if (virSecurityManagerCheckAllLabel(driver->securityManager, vm->def) < 0)
        goto cleanup;

    /* If you are using a SecurityDriver with dynamic labelling,
       then generate a security label for isolation */
    VIR_DEBUG("Generating domain security label (if required)");
    if (virSecurityManagerGenLabel(driver->securityManager, vm->def) < 0) {
        virDomainAuditSecurityLabel(vm, false);
        goto cleanup;
    }
    virDomainAuditSecurityLabel(vm, true);

    if (vm->def->mem.nhugepages) {
        for (i = 0; i < cfg->nhugetlbfs; i++) {
            char *hugepagePath = qemuGetHugepagePath(&cfg->hugetlbfs[i]);

            if (!hugepagePath)
                goto cleanup;

            if (virSecurityManagerSetHugepages(driver->securityManager,
                                               vm->def, hugepagePath) < 0) {
                virReportError(VIR_ERR_INTERNAL_ERROR,
                               "%s", _("Unable to set huge path in security driver"));
                VIR_FREE(hugepagePath);
                goto cleanup;
            }
            VIR_FREE(hugepagePath);
        }
    }

    /* Ensure no historical cgroup for this VM is lying around bogus
     * settings */
    VIR_DEBUG("Ensuring no historical cgroup is lying around");
    qemuRemoveCgroup(driver, vm);

    for (i = 0; i < vm->def->ngraphics; ++i) {
        virDomainGraphicsDefPtr graphics = vm->def->graphics[i];
        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC &&
            !graphics->data.vnc.autoport) {
            if (virPortAllocatorSetUsed(driver->remotePorts,
                                        graphics->data.vnc.port,
                                        true) < 0) {
                goto cleanup;
            }

            graphics->data.vnc.portReserved = true;

        } else if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE &&
                   !graphics->data.spice.autoport) {

            if (graphics->data.spice.port > 0) {
                if (virPortAllocatorSetUsed(driver->remotePorts,
                                            graphics->data.spice.port,
                                            true) < 0)
                    goto cleanup;

                graphics->data.spice.portReserved = true;
            }

            if (graphics->data.spice.tlsPort > 0) {
                if (virPortAllocatorSetUsed(driver->remotePorts,
                                            graphics->data.spice.tlsPort,
                                            true) < 0)
                    goto cleanup;

                graphics->data.spice.tlsPortReserved = true;
            }
        }
    }

    for (i = 0; i < vm->def->ngraphics; ++i) {
        virDomainGraphicsDefPtr graphics = vm->def->graphics[i];
        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC) {
            if (qemuProcessVNCAllocatePorts(driver, graphics) < 0)
                goto cleanup;
        } else if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
            if (qemuProcessSPICEAllocatePorts(driver, cfg, graphics) < 0)
                goto cleanup;
        }

        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC ||
            graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
            if (graphics->nListens == 0) {
                if (VIR_EXPAND_N(graphics->listens, graphics->nListens, 1) < 0)
                    goto cleanup;
                graphics->listens[0].type = VIR_DOMAIN_GRAPHICS_LISTEN_TYPE_ADDRESS;
                if (VIR_STRDUP(graphics->listens[0].address,
                               graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC ?
                               cfg->vncListen : cfg->spiceListen) < 0) {
                    VIR_SHRINK_N(graphics->listens, graphics->nListens, 1);
                    goto cleanup;
                }
                graphics->listens[0].fromConfig = true;
            } else if (graphics->nListens > 1) {
                virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                               _("QEMU does not support multiple listen "
                                 "addresses for one graphics device."));
                goto cleanup;
            }
        }
    }

    if (virFileMakePath(cfg->logDir) < 0) {
        virReportSystemError(errno,
                             _("cannot create log directory %s"),
                             cfg->logDir);
        goto cleanup;
    }

    VIR_DEBUG("Creating domain log file");
    if ((logfile = qemuDomainCreateLog(driver, vm, false)) < 0)
        goto cleanup;

    if (vm->def->virtType == VIR_DOMAIN_VIRT_KVM) {
        VIR_DEBUG("Checking for KVM availability");
        if (!virFileExists("/dev/kvm")) {
            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                           _("Domain requires KVM, but it is not available. "
                             "Check that virtualization is enabled in the host BIOS, "
                             "and host configuration is setup to load the kvm modules."));
            goto cleanup;
        }
    }

    if (!qemuValidateCpuMax(vm->def, priv->qemuCaps))
        goto cleanup;

    if (qemuAssignDeviceAliases(vm->def, priv->qemuCaps) < 0)
        goto cleanup;

    /* Get the advisory nodeset from numad if 'placement' of
     * either <vcpu> or <numatune> is 'auto'.
     */
    if (virDomainDefNeedsPlacementAdvice(vm->def)) {
        nodeset = virNumaGetAutoPlacementAdvice(vm->def->vcpus,
                                                vm->def->mem.max_balloon);
        if (!nodeset)
            goto cleanup;

        VIR_DEBUG("Nodeset returned from numad: %s", nodeset);

        if (virBitmapParse(nodeset, 0, &nodemask, VIR_DOMAIN_CPUMASK_LEN) < 0)
            goto cleanup;
    }
    priv->autoNodeset = nodemask;

    /* "volume" type disk's source must be translated before
     * cgroup and security setting.
     */
    for (i = 0; i < vm->def->ndisks; i++) {
        if (virStorageTranslateDiskSourcePool(conn, vm->def->disks[i]) < 0)
            goto cleanup;
    }

    if (qemuDomainCheckDiskPresence(driver, vm,
                                    flags & VIR_QEMU_PROCESS_START_COLD) < 0)
        goto cleanup;

    if (vm->def->mem.min_guarantee) {
        virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                       _("Parameter 'min_guarantee' "
                         "not supported by QEMU."));
        goto cleanup;
    }

    if (VIR_ALLOC(priv->monConfig) < 0)
        goto cleanup;

    VIR_DEBUG("Preparing monitor state");
    if (qemuProcessPrepareMonitorChr(cfg, priv->monConfig, vm->def->name) < 0)
        goto cleanup;

    priv->monJSON = virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_MONITOR_JSON);
    priv->monError = false;
    priv->monStart = 0;
    priv->gotShutdown = false;

    VIR_FREE(priv->pidfile);
    if (!(priv->pidfile = virPidFileBuildPath(cfg->stateDir, vm->def->name))) {
        virReportSystemError(errno,
                             "%s", _("Failed to build pidfile path."));
        goto cleanup;
    }

    if (unlink(priv->pidfile) < 0 &&
        errno != ENOENT) {
        virReportSystemError(errno,
                             _("Cannot remove stale PID file %s"),
                             priv->pidfile);
        goto cleanup;
    }

    /*
     * Normally PCI addresses are assigned in the virDomainCreate
     * or virDomainDefine methods. We might still need to assign
     * some here to cope with the question of upgrades. Regardless
     * we also need to populate the PCI address set cache for later
     * use in hotplug
     */
    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
        VIR_DEBUG("Assigning domain PCI addresses");
        if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
            goto cleanup;
    }

    VIR_DEBUG("Building emulator command line");
    if (!(cmd = qemuBuildCommandLine(conn, driver, vm->def, priv->monConfig,
                                     priv->monJSON, priv->qemuCaps,
                                     migrateFrom, stdin_fd, snapshot, vmop,
                                     &buildCommandLineCallbacks, false,
                                     qemuCheckFips(),
                                     nodemask,
                                     &nnicindexes, &nicindexes)))
        goto cleanup;

    /* now that we know it is about to start call the hook if present */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);
        int hookret;

        hookret = virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                              VIR_HOOK_QEMU_OP_START, VIR_HOOK_SUBOP_BEGIN,
                              NULL, xml, NULL);
        VIR_FREE(xml);

        /*
         * If the script raised an error abort the launch
         */
        if (hookret < 0)
            goto cleanup;
    }

    qemuLogOperation(vm, "starting up", logfile, cmd);

    qemuDomainObjCheckTaint(driver, vm, logfile);

    if ((pos = lseek(logfile, 0, SEEK_END)) < 0)
        VIR_WARN("Unable to seek to end of logfile: %s",
                 virStrerror(errno, ebuf, sizeof(ebuf)));

    VIR_DEBUG("Clear emulator capabilities: %d",
              cfg->clearEmulatorCapabilities);
    if (cfg->clearEmulatorCapabilities)
        virCommandClearCaps(cmd);

    /* in case a certain disk is desirous of CAP_SYS_RAWIO, add this */
    for (i = 0; i < vm->def->ndisks; i++) {
        virDomainDeviceDef dev;
        virDomainDiskDefPtr disk = vm->def->disks[i];

        if (vm->def->disks[i]->rawio == VIR_TRISTATE_BOOL_YES) {
#ifdef CAP_SYS_RAWIO
            virCommandAllowCap(cmd, CAP_SYS_RAWIO);
            rawio_set = true;
#else
            virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                           _("Raw I/O is not supported on this platform"));
            goto cleanup;
#endif
        }

        dev.type = VIR_DOMAIN_DEVICE_DISK;
        dev.data.disk = disk;
        if (qemuAddSharedDevice(driver, &dev, vm->def->name) < 0)
            goto cleanup;

        if (qemuSetUnprivSGIO(&dev) < 0)
            goto cleanup;
    }

    /* If rawio not already set, check hostdevs as well */
    if (!rawio_set) {
        for (i = 0; i < vm->def->nhostdevs; i++) {
            virDomainHostdevSubsysSCSIPtr scsisrc =
                &vm->def->hostdevs[i]->source.subsys.u.scsi;
            if (scsisrc->rawio == VIR_TRISTATE_BOOL_YES) {
#ifdef CAP_SYS_RAWIO
                virCommandAllowCap(cmd, CAP_SYS_RAWIO);
                break;
#else
                virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
                               _("Raw I/O is not supported on this platform"));
                goto cleanup;
#endif
            }
        }
    }

    virCommandSetPreExecHook(cmd, qemuProcessHook, &hookData);
    virCommandSetMaxProcesses(cmd, cfg->maxProcesses);
    virCommandSetMaxFiles(cmd, cfg->maxFiles);
    virCommandSetUmask(cmd, 0x002);

    VIR_DEBUG("Setting up security labelling");
    if (virSecurityManagerSetChildProcessLabel(driver->securityManager,
                                               vm->def, cmd) < 0) {
        goto cleanup;
    }

    virCommandSetOutputFD(cmd, &logfile);
    virCommandSetErrorFD(cmd, &logfile);
    virCommandNonblockingFDs(cmd);
    virCommandSetPidFile(cmd, priv->pidfile);
    virCommandDaemonize(cmd);
    virCommandRequireHandshake(cmd);

    if (virSecurityManagerPreFork(driver->securityManager) < 0)
        goto cleanup;
    ret = virCommandRun(cmd, NULL);
    virSecurityManagerPostFork(driver->securityManager);

    /* wait for qemu process to show up */
    if (ret == 0) {
        if (virPidFileReadPath(priv->pidfile, &vm->pid) < 0) {
            virReportError(VIR_ERR_INTERNAL_ERROR,
                           _("Domain %s didn't show up"), vm->def->name);
            ret = -1;
        }
        VIR_DEBUG("QEMU vm=%p name=%s running with pid=%llu",
                  vm, vm->def->name, (unsigned long long)vm->pid);
    } else {
        VIR_DEBUG("QEMU vm=%p name=%s failed to spawn",
                  vm, vm->def->name);
    }

    VIR_DEBUG("Writing early domain status to disk");
    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
        goto cleanup;

    VIR_DEBUG("Waiting for handshake from child");
    if (virCommandHandshakeWait(cmd) < 0) {
        /* Read errors from child that occurred between fork and exec. */
        qemuProcessReadChildErrors(driver, vm, pos);
        goto cleanup;
    }

    VIR_DEBUG("Setting up domain cgroup (if required)");
    if (qemuSetupCgroup(driver, vm, nnicindexes, nicindexes) < 0)
        goto cleanup;

    /* This must be done after cgroup placement to avoid resetting CPU
     * affinity */
    if (!vm->def->cputune.emulatorpin &&
        qemuProcessInitCpuAffinity(driver, vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting domain security labels");
    if (virSecurityManagerSetAllLabel(driver->securityManager,
                                      vm->def, stdin_path) < 0)
        goto cleanup;

    /* Security manager labeled all devices, therefore
     * if any operation from now on fails and we goto cleanup,
     * where virSecurityManagerRestoreAllLabel() is called
     * (hidden under qemuProcessStop) we need to restore labels. */
    stop_flags &= ~VIR_QEMU_PROCESS_STOP_NO_RELABEL;

    if (stdin_fd != -1) {
        /* if there's an fd to migrate from, and it's a pipe, put the
         * proper security label on it
         */
        struct stat stdin_sb;

        VIR_DEBUG("setting security label on pipe used for migration");

        if (fstat(stdin_fd, &stdin_sb) < 0) {
            virReportSystemError(errno,
                                 _("cannot stat fd %d"), stdin_fd);
            goto cleanup;
        }
        if (S_ISFIFO(stdin_sb.st_mode) &&
            virSecurityManagerSetImageFDLabel(driver->securityManager, vm->def, stdin_fd) < 0)
            goto cleanup;
    }

    VIR_DEBUG("Labelling done, completing handshake to child");
    if (virCommandHandshakeNotify(cmd) < 0)
        goto cleanup;
    VIR_DEBUG("Handshake complete, child running");

    if (migrateFrom)
        flags |= VIR_QEMU_PROCESS_START_PAUSED;

    if (ret == -1) /* The VM failed to start; tear filters before taps */
        virDomainConfVMNWFilterTeardown(vm);

    if (ret == -1) /* The VM failed to start */
        goto cleanup;

    VIR_DEBUG("Setting cgroup for emulator (if required)");
    if (qemuSetupCgroupForEmulator(driver, vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting affinity of emulator threads");
    if (qemuProcessSetEmulatorAffinity(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Waiting for monitor to show up");
    if (qemuProcessWaitForMonitor(driver, vm, asyncJob, priv->qemuCaps, pos) < 0)
        goto cleanup;

    /* Failure to connect to agent shouldn't be fatal */
    if ((ret = qemuConnectAgent(driver, vm)) < 0) {
        if (ret == -2)
            goto cleanup;

        VIR_WARN("Cannot connect to QEMU guest agent for %s",
                 vm->def->name);
        virResetLastError();
        priv->agentError = true;
    }

    VIR_DEBUG("Detecting if required emulator features are present");
    if (!qemuProcessVerifyGuestCPU(driver, vm, asyncJob))
        goto cleanup;

    VIR_DEBUG("Setting up post-init cgroup restrictions");
    if (qemuSetupCpusetMems(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Detecting VCPU PIDs");
    if (qemuProcessDetectVcpuPIDs(driver, vm, asyncJob) < 0)
        goto cleanup;

    VIR_DEBUG("Detecting IOThread PIDs");
    if (qemuProcessDetectIOThreadPIDs(driver, vm, asyncJob) < 0)
        goto cleanup;

    VIR_DEBUG("Setting cgroup for each VCPU (if required)");
    if (qemuSetupCgroupForVcpu(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting cgroup for each IOThread (if required)");
    if (qemuSetupCgroupForIOThreads(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting VCPU affinities");
    if (qemuProcessSetVcpuAffinities(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting affinity of IOThread threads");
    if (qemuProcessSetIOThreadsAffinity(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting scheduler parameters");
    if (qemuProcessSetSchedulers(vm) < 0)
        goto cleanup;

    VIR_DEBUG("Setting any required VM passwords");
    if (qemuProcessInitPasswords(conn, driver, vm, asyncJob) < 0)
        goto cleanup;

    /* If we have -device, then addresses are assigned explicitly.
     * If not, then we have to detect dynamic ones here */
    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
        VIR_DEBUG("Determining domain device PCI addresses");
        if (qemuProcessInitPCIAddresses(driver, vm, asyncJob) < 0)
            goto cleanup;
    }

    /* set default link states */
    /* qemu doesn't support setting this on the command line, so
     * enter the monitor */
    VIR_DEBUG("Setting network link states");
    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto cleanup;
    if (qemuProcessSetLinkStates(vm) < 0)
        goto exit_monitor;
    if (qemuDomainObjExitMonitor(driver, vm))
        goto cleanup;

    VIR_DEBUG("Fetching list of active devices");
    if (qemuDomainUpdateDeviceList(driver, vm, asyncJob) < 0)
        goto cleanup;

    /* Technically, qemuProcessStart can be called from inside
     * QEMU_ASYNC_JOB_MIGRATION_IN, but we are okay treating this like
     * a sync job since no other job can call into the domain until
     * migration completes.  */
    VIR_DEBUG("Setting initial memory amount");
    cur_balloon = vm->def->mem.cur_balloon;
    if (cur_balloon != vm->def->mem.cur_balloon) {
        virReportError(VIR_ERR_OVERFLOW,
                       _("unable to set balloon to %lld"),
                       vm->def->mem.cur_balloon);
        goto cleanup;
    }
    if (vm->def->memballoon && vm->def->memballoon->period)
        period = vm->def->memballoon->period;
    if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
        goto cleanup;
    if (period)
        qemuMonitorSetMemoryStatsPeriod(priv->mon, period);
    if (qemuMonitorSetBalloon(priv->mon, cur_balloon) < 0)
        goto exit_monitor;
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        goto cleanup;

    VIR_DEBUG("Detecting actual memory size for video device");
    if (qemuProcessUpdateVideoRamSize(driver, vm, asyncJob) < 0)
        goto cleanup;

    if (!(flags & VIR_QEMU_PROCESS_START_PAUSED)) {
        VIR_DEBUG("Starting domain CPUs");
        /* Allow the CPUS to start executing */
        if (qemuProcessStartCPUs(driver, vm, conn,
                                 VIR_DOMAIN_RUNNING_BOOTED,
                                 QEMU_ASYNC_JOB_NONE) < 0) {
            if (virGetLastError() == NULL)
                virReportError(VIR_ERR_INTERNAL_ERROR,
                               "%s", _("resume operation failed"));
            goto cleanup;
        }
    } else {
        virDomainObjSetState(vm, VIR_DOMAIN_PAUSED,
                             migrateFrom ?
                             VIR_DOMAIN_PAUSED_MIGRATION :
                             VIR_DOMAIN_PAUSED_USER);
    }

    if (flags & VIR_QEMU_PROCESS_START_AUTODESTROY &&
        qemuProcessAutoDestroyAdd(driver, vm, conn) < 0)
        goto cleanup;

    VIR_DEBUG("Writing domain status to disk");
    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
        goto cleanup;

    /* finally we can call the 'started' hook script if any */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);
        int hookret;

        hookret = virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                              VIR_HOOK_QEMU_OP_STARTED, VIR_HOOK_SUBOP_BEGIN,
                              NULL, xml, NULL);
        VIR_FREE(xml);

        /*
         * If the script raised an error abort the launch
         */
        if (hookret < 0)
            goto cleanup;
    }

    /* Keep watching qemu log for errors during incoming migration, otherwise
     * unset reporting errors from qemu log. */
    if (!migrateFrom)
        qemuMonitorSetDomainLog(priv->mon, -1);

    virCommandFree(cmd);
    VIR_FORCE_CLOSE(logfile);
    virObjectUnref(cfg);
    virObjectUnref(caps);
    VIR_FREE(nicindexes);

    return 0;

 cleanup:
    /* We jump here if we failed to start the VM for any reason, or
     * if we failed to initialize the now running VM. kill it off and
     * pretend we never started it */
    VIR_FREE(nodeset);
    virCommandFree(cmd);
    VIR_FORCE_CLOSE(logfile);
    if (priv->mon)
        qemuMonitorSetDomainLog(priv->mon, -1);
    qemuProcessStop(driver, vm, VIR_DOMAIN_SHUTOFF_FAILED, stop_flags);
    virObjectUnref(cfg);
    virObjectUnref(caps);
    VIR_FREE(nicindexes);

    return -1;

 exit_monitor:
    ignore_value(qemuDomainObjExitMonitor(driver, vm));
    goto cleanup;
}


int
qemuProcessKill(virDomainObjPtr vm, unsigned int flags)
{
    int ret;

    VIR_DEBUG("vm=%p name=%s pid=%llu flags=%x",
              vm, vm->def->name,
              (unsigned long long)vm->pid, flags);

    if (!(flags & VIR_QEMU_PROCESS_KILL_NOCHECK)) {
        if (!virDomainObjIsActive(vm)) {
            VIR_DEBUG("VM '%s' not active", vm->def->name);
            return 0;
        }
    }

    if (flags & VIR_QEMU_PROCESS_KILL_NOWAIT) {
        virProcessKill(vm->pid,
                       (flags & VIR_QEMU_PROCESS_KILL_FORCE) ?
                       SIGKILL : SIGTERM);
        return 0;
    }

    ret = virProcessKillPainfully(vm->pid,
                                  !!(flags & VIR_QEMU_PROCESS_KILL_FORCE));

    return ret;
}


void qemuProcessStop(virQEMUDriverPtr driver,
                     virDomainObjPtr vm,
                     virDomainShutoffReason reason,
                     unsigned int flags)
{
    int ret;
    int retries = 0;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    virErrorPtr orig_err;
    virDomainDefPtr def;
    virNetDevVPortProfilePtr vport = NULL;
    size_t i;
    int logfile = -1;
    char *timestamp;
    char ebuf[1024];
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);

    VIR_DEBUG("Shutting down vm=%p name=%s id=%d pid=%llu flags=%x",
              vm, vm->def->name, vm->def->id,
              (unsigned long long)vm->pid, flags);

    if (!virDomainObjIsActive(vm)) {
        VIR_DEBUG("VM '%s' not active", vm->def->name);
        virObjectUnref(cfg);
        return;
    }

    /* This method is routinely used in clean up paths. Disable error
     * reporting so we don't squash a legit error. */
    orig_err = virSaveLastError();

    /*
     * We may unlock the vm in qemuProcessKill(), and another thread
     * can lock the vm, and then call qemuProcessStop(). So we should
     * set vm->def->id to -1 here to avoid qemuProcessStop() to be called twice.
     */
    vm->def->id = -1;

    if (virAtomicIntDecAndTest(&driver->nactive) && driver->inhibitCallback)
        driver->inhibitCallback(false, driver->inhibitOpaque);

    if ((logfile = qemuDomainCreateLog(driver, vm, true)) < 0) {
        /* To not break the normal domain shutdown process, skip the
         * timestamp log writing if failed on opening log file. */
        VIR_WARN("Unable to open logfile: %s",
                  virStrerror(errno, ebuf, sizeof(ebuf)));
    } else {
        if ((timestamp = virTimeStringNow()) != NULL) {
            if (safewrite(logfile, timestamp, strlen(timestamp)) < 0 ||
                safewrite(logfile, SHUTDOWN_POSTFIX,
                          strlen(SHUTDOWN_POSTFIX)) < 0) {
                VIR_WARN("Unable to write timestamp to logfile: %s",
                         virStrerror(errno, ebuf, sizeof(ebuf)));
            }

            VIR_FREE(timestamp);
        }

        if (VIR_CLOSE(logfile) < 0)
             VIR_WARN("Unable to close logfile: %s",
                      virStrerror(errno, ebuf, sizeof(ebuf)));
    }

    /* Clear network bandwidth */
    virDomainClearNetBandwidth(vm);

    virDomainConfVMNWFilterTeardown(vm);

    if (cfg->macFilter) {
        def = vm->def;
        for (i = 0; i < def->nnets; i++) {
            virDomainNetDefPtr net = def->nets[i];
            if (net->ifname == NULL)
                continue;
            ignore_value(ebtablesRemoveForwardAllowIn(driver->ebtables,
                                                      net->ifname,
                                                      &net->mac));
        }
    }

    virPortAllocatorRelease(driver->migrationPorts, priv->nbdPort);
    priv->nbdPort = 0;

    if (priv->agent) {
        qemuAgentClose(priv->agent);
        priv->agent = NULL;
        priv->agentError = false;
    }

    if (priv->mon) {
        qemuMonitorClose(priv->mon);
        priv->mon = NULL;
    }

    if (priv->monConfig) {
        if (priv->monConfig->type == VIR_DOMAIN_CHR_TYPE_UNIX)
            unlink(priv->monConfig->data.nix.path);
        virDomainChrSourceDefFree(priv->monConfig);
        priv->monConfig = NULL;
    }

    ignore_value(virDomainChrDefForeach(vm->def,
                                        false,
                                        qemuProcessCleanupChardevDevice,
                                        NULL));


    /* shut it off for sure */
    ignore_value(qemuProcessKill(vm,
                                 VIR_QEMU_PROCESS_KILL_FORCE|
                                 VIR_QEMU_PROCESS_KILL_NOCHECK));

    qemuDomainCleanupRun(driver, vm);

    /* Stop autodestroy in case guest is restarted */
    qemuProcessAutoDestroyRemove(driver, vm);

    /* now that we know it's stopped call the hook if present */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);

        /* we can't stop the operation even if the script raised an error */
        virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                    VIR_HOOK_QEMU_OP_STOPPED, VIR_HOOK_SUBOP_END,
                    NULL, xml, NULL);
        VIR_FREE(xml);
    }

    /* Reset Security Labels unless caller don't want us to */
    if (!(flags & VIR_QEMU_PROCESS_STOP_NO_RELABEL))
        virSecurityManagerRestoreAllLabel(driver->securityManager,
                                          vm->def,
                                          !!(flags & VIR_QEMU_PROCESS_STOP_MIGRATED));
    virSecurityManagerReleaseLabel(driver->securityManager, vm->def);

    for (i = 0; i < vm->def->ndisks; i++) {
        virDomainDeviceDef dev;
        virDomainDiskDefPtr disk = vm->def->disks[i];

        dev.type = VIR_DOMAIN_DEVICE_DISK;
        dev.data.disk = disk;
        ignore_value(qemuRemoveSharedDevice(driver, &dev, vm->def->name));
    }

    /* Clear out dynamically assigned labels */
    for (i = 0; i < vm->def->nseclabels; i++) {
        if (vm->def->seclabels[i]->type == VIR_DOMAIN_SECLABEL_DYNAMIC)
            VIR_FREE(vm->def->seclabels[i]->label);
        VIR_FREE(vm->def->seclabels[i]->imagelabel);
    }

    virStringFreeList(priv->qemuDevices);
    priv->qemuDevices = NULL;

    virDomainDefClearDeviceAliases(vm->def);
    if (!priv->persistentAddrs) {
        virDomainDefClearPCIAddresses(vm->def);
        virDomainPCIAddressSetFree(priv->pciaddrs);
        priv->pciaddrs = NULL;
        virDomainDefClearCCWAddresses(vm->def);
        virDomainCCWAddressSetFree(priv->ccwaddrs);
        priv->ccwaddrs = NULL;
    }

    qemuDomainReAttachHostDevices(driver, vm->def);

    def = vm->def;
    for (i = 0; i < def->nnets; i++) {
        virDomainNetDefPtr net = def->nets[i];
        vport = virDomainNetGetActualVirtPortProfile(net);

        switch (virDomainNetGetActualType(net)) {
        case VIR_DOMAIN_NET_TYPE_DIRECT:
            ignore_value(virNetDevMacVLanDeleteWithVPortProfile(
                             net->ifname, &net->mac,
                             virDomainNetGetActualDirectDev(net),
                             virDomainNetGetActualDirectMode(net),
                             virDomainNetGetActualVirtPortProfile(net),
                             cfg->stateDir));
            VIR_FREE(net->ifname);
            break;
        case VIR_DOMAIN_NET_TYPE_BRIDGE:
        case VIR_DOMAIN_NET_TYPE_NETWORK:
#ifdef VIR_NETDEV_TAP_REQUIRE_MANUAL_CLEANUP
            if (!(vport && vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH))
                ignore_value(virNetDevTapDelete(net->ifname, net->backend.tap));
#endif
            break;
        }
        /* release the physical device (or any other resources used by
         * this interface in the network driver
         */
        if (vport && vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH)
            ignore_value(virNetDevOpenvswitchRemovePort(
                                       virDomainNetGetActualBridgeName(net),
                                       net->ifname));

        /* kick the device out of the hostdev list too */
        virDomainNetRemoveHostdev(def, net);
        networkReleaseActualDevice(vm->def, net);
    }

 retry:
    if ((ret = qemuRemoveCgroup(driver, vm)) < 0) {
        if (ret == -EBUSY && (retries++ < 5)) {
            usleep(200*1000);
            goto retry;
        }
        VIR_WARN("Failed to remove cgroup for %s",
                 vm->def->name);
    }
    virCgroupFree(&priv->cgroup);

    qemuProcessRemoveDomainStatus(driver, vm);

    /* Remove VNC and Spice ports from port reservation bitmap, but only if
       they were reserved by the driver (autoport=yes)
    */
    for (i = 0; i < vm->def->ngraphics; ++i) {
        virDomainGraphicsDefPtr graphics = vm->def->graphics[i];
        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_VNC) {
            if (graphics->data.vnc.autoport) {
                virPortAllocatorRelease(driver->remotePorts,
                                        graphics->data.vnc.port);
            } else if (graphics->data.vnc.portReserved) {
                virPortAllocatorSetUsed(driver->remotePorts,
                                        graphics->data.spice.port,
                                        false);
                graphics->data.vnc.portReserved = false;
            }
            virPortAllocatorRelease(driver->webSocketPorts,
                                    graphics->data.vnc.websocket);
        }
        if (graphics->type == VIR_DOMAIN_GRAPHICS_TYPE_SPICE) {
            if (graphics->data.spice.autoport) {
                virPortAllocatorRelease(driver->remotePorts,
                                        graphics->data.spice.port);
                virPortAllocatorRelease(driver->remotePorts,
                                        graphics->data.spice.tlsPort);
            } else {
                if (graphics->data.spice.portReserved) {
                    virPortAllocatorSetUsed(driver->remotePorts,
                                            graphics->data.spice.port,
                                            false);
                    graphics->data.spice.portReserved = false;
                }

                if (graphics->data.spice.tlsPortReserved) {
                    virPortAllocatorSetUsed(driver->remotePorts,
                                            graphics->data.spice.tlsPort,
                                            false);
                    graphics->data.spice.tlsPortReserved = false;
                }
            }
        }
    }

    vm->taint = 0;
    vm->pid = -1;
    virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, reason);
    VIR_FREE(priv->vcpupids);
    priv->nvcpupids = 0;
    VIR_FREE(priv->iothreadpids);
    priv->niothreadpids = 0;
    virObjectUnref(priv->qemuCaps);
    priv->qemuCaps = NULL;
    VIR_FREE(priv->pidfile);

    /* The "release" hook cleans up additional resources */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);

        /* we can't stop the operation even if the script raised an error */
        virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                    VIR_HOOK_QEMU_OP_RELEASE, VIR_HOOK_SUBOP_END,
                    NULL, xml, NULL);
        VIR_FREE(xml);
    }

    if (vm->newDef) {
        virDomainDefFree(vm->def);
        vm->def = vm->newDef;
        vm->def->id = -1;
        vm->newDef = NULL;
    }

    if (orig_err) {
        virSetError(orig_err);
        virFreeError(orig_err);
    }
    virObjectUnref(cfg);
}


int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED,
                      virQEMUDriverPtr driver,
                      virDomainObjPtr vm,
                      pid_t pid,
                      const char *pidfile,
                      virDomainChrSourceDefPtr monConfig,
                      bool monJSON)
{
    size_t i;
    char ebuf[1024];
    int logfile = -1;
    char *timestamp;
    qemuDomainObjPrivatePtr priv = vm->privateData;
    bool running = true;
    virDomainPausedReason reason;
    virSecurityLabelPtr seclabel = NULL;
    virSecurityLabelDefPtr seclabeldef = NULL;
    bool seclabelgen = false;
    virSecurityManagerPtr* sec_managers = NULL;
    const char *model;
    virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver);
    virCapsPtr caps = NULL;
    bool active = false;
    int ret;

    VIR_DEBUG("Beginning VM attach process");

    if (virDomainObjIsActive(vm)) {
        virReportError(VIR_ERR_OPERATION_INVALID,
                       "%s", _("VM is already active"));
        virObjectUnref(cfg);
        return -1;
    }

    if (!(caps = virQEMUDriverGetCapabilities(driver, false)))
        goto error;

    /* Do this upfront, so any part of the startup process can add
     * runtime state to vm->def that won't be persisted. This let's us
     * report implicit runtime defaults in the XML, like vnc listen/socket
     */
    VIR_DEBUG("Setting current domain def as transient");
    if (virDomainObjSetDefTransient(caps, driver->xmlopt, vm, true) < 0)
        goto error;

    vm->def->id = qemuDriverAllocateID(driver);

    if (virAtomicIntInc(&driver->nactive) == 1 && driver->inhibitCallback)
        driver->inhibitCallback(true, driver->inhibitOpaque);
    active = true;

    if (virFileMakePath(cfg->logDir) < 0) {
        virReportSystemError(errno,
                             _("cannot create log directory %s"),
                             cfg->logDir);
        goto error;
    }

    VIR_FREE(priv->pidfile);
    if (VIR_STRDUP(priv->pidfile, pidfile) < 0)
        goto error;

    vm->pid = pid;

    VIR_DEBUG("Detect security driver config");
    sec_managers = virSecurityManagerGetNested(driver->securityManager);
    if (sec_managers == NULL)
        goto error;

    for (i = 0; sec_managers[i]; i++) {
        seclabelgen = false;
        model = virSecurityManagerGetModel(sec_managers[i]);
        seclabeldef = virDomainDefGetSecurityLabelDef(vm->def, model);
        if (seclabeldef == NULL) {
            if (!(seclabeldef = virSecurityLabelDefNew(model)))
                goto error;
            seclabelgen = true;
        }
        seclabeldef->type = VIR_DOMAIN_SECLABEL_STATIC;
        if (VIR_ALLOC(seclabel) < 0)
            goto error;
        if (virSecurityManagerGetProcessLabel(sec_managers[i],
                                              vm->def, vm->pid, seclabel) < 0)
            goto error;

        if (VIR_STRDUP(seclabeldef->model, model) < 0)
            goto error;

        if (VIR_STRDUP(seclabeldef->label, seclabel->label) < 0)
            goto error;
        VIR_FREE(seclabel);

        if (seclabelgen) {
            if (VIR_APPEND_ELEMENT(vm->def->seclabels, vm->def->nseclabels, seclabeldef) < 0)
                goto error;
            seclabelgen = false;
        }
    }

    if (virSecurityManagerCheckAllLabel(driver->securityManager, vm->def) < 0)
        goto error;
    if (virSecurityManagerGenLabel(driver->securityManager, vm->def) < 0)
        goto error;

    VIR_DEBUG("Creating domain log file");
    if ((logfile = qemuDomainCreateLog(driver, vm, false)) < 0)
        goto error;

    VIR_DEBUG("Determining emulator version");
    virObjectUnref(priv->qemuCaps);
    if (!(priv->qemuCaps = virQEMUCapsCacheLookupCopy(driver->qemuCapsCache,
                                                      vm->def->emulator,
                                                      vm->def->os.machine)))
        goto error;

    VIR_DEBUG("Preparing monitor state");
    priv->monConfig = monConfig;
    monConfig = NULL;
    priv->monJSON = monJSON;

    priv->gotShutdown = false;

    /*
     * Normally PCI addresses are assigned in the virDomainCreate
     * or virDomainDefine methods. We might still need to assign
     * some here to cope with the question of upgrades. Regardless
     * we also need to populate the PCI address set cache for later
     * use in hotplug
     */
    if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
        VIR_DEBUG("Assigning domain PCI addresses");
        if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0)
            goto error;
    }

    if ((timestamp = virTimeStringNow()) == NULL) {
        goto error;
    } else {
        if (safewrite(logfile, timestamp, strlen(timestamp)) < 0 ||
            safewrite(logfile, ATTACH_POSTFIX, strlen(ATTACH_POSTFIX)) < 0) {
            VIR_WARN("Unable to write timestamp to logfile: %s",
                     virStrerror(errno, ebuf, sizeof(ebuf)));
        }

        VIR_FREE(timestamp);
    }

    qemuDomainObjTaint(driver, vm, VIR_DOMAIN_TAINT_EXTERNAL_LAUNCH, logfile);

    VIR_DEBUG("Waiting for monitor to show up");
    if (qemuProcessWaitForMonitor(driver, vm, QEMU_ASYNC_JOB_NONE, priv->qemuCaps, -1) < 0)
        goto error;

    /* Failure to connect to agent shouldn't be fatal */
    if ((ret = qemuConnectAgent(driver, vm)) < 0) {
        if (ret == -2)
            goto error;

        VIR_WARN("Cannot connect to QEMU guest agent for %s",
                 vm->def->name);
        virResetLastError();
        priv->agentError = true;
    }

    VIR_DEBUG("Detecting VCPU PIDs");
    if (qemuProcessDetectVcpuPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
        goto error;

    VIR_DEBUG("Detecting IOThread PIDs");
    if (qemuProcessDetectIOThreadPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
        goto error;

    /* If we have -device, then addresses are assigned explicitly.
     * If not, then we have to detect dynamic ones here */
    if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) {
        VIR_DEBUG("Determining domain device PCI addresses");
        if (qemuProcessInitPCIAddresses(driver, vm, QEMU_ASYNC_JOB_NONE) < 0)
            goto error;
    }

    VIR_DEBUG("Getting initial memory amount");
    qemuDomainObjEnterMonitor(driver, vm);
    if (qemuMonitorGetBalloonInfo(priv->mon, &vm->def->mem.cur_balloon) < 0)
        goto exit_monitor;
    if (qemuMonitorGetStatus(priv->mon, &running, &reason) < 0)
        goto exit_monitor;
    if (qemuMonitorGetVirtType(priv->mon, &vm->def->virtType) < 0)
        goto exit_monitor;
    if (qemuDomainObjExitMonitor(driver, vm) < 0)
        goto error;

    if (running) {
        virDomainObjSetState(vm, VIR_DOMAIN_RUNNING,
                             VIR_DOMAIN_RUNNING_UNPAUSED);
        if (vm->def->memballoon && vm->def->memballoon->period) {
            qemuDomainObjEnterMonitor(driver, vm);
            qemuMonitorSetMemoryStatsPeriod(priv->mon,
                                            vm->def->memballoon->period);
            if (qemuDomainObjExitMonitor(driver, vm) < 0)
                goto error;
        }
    } else {
        virDomainObjSetState(vm, VIR_DOMAIN_PAUSED, reason);
    }

    VIR_DEBUG("Writing domain status to disk");
    if (virDomainSaveStatus(driver->xmlopt, cfg->stateDir, vm) < 0)
        goto error;

    /* Run an hook to allow admins to do some magic */
    if (virHookPresent(VIR_HOOK_DRIVER_QEMU)) {
        char *xml = qemuDomainDefFormatXML(driver, vm->def, 0);
        int hookret;

        hookret = virHookCall(VIR_HOOK_DRIVER_QEMU, vm->def->name,
                              VIR_HOOK_QEMU_OP_ATTACH, VIR_HOOK_SUBOP_BEGIN,
                              NULL, xml, NULL);
        VIR_FREE(xml);

        /*
         * If the script raised an error abort the launch
         */
        if (hookret < 0)
            goto error;
    }

    VIR_FORCE_CLOSE(logfile);
    VIR_FREE(seclabel);
    VIR_FREE(sec_managers);
    virObjectUnref(cfg);
    virObjectUnref(caps);

    return 0;

 exit_monitor:
    ignore_value(qemuDomainObjExitMonitor(driver, vm));
 error:
    /* We jump here if we failed to attach to the VM for any reason.
     * Leave the domain running, but pretend we never attempted to
     * attach to it.  */
    if (active && virAtomicIntDecAndTest(&driver->nactive) &&
        driver->inhibitCallback)
        driver->inhibitCallback(false, driver->inhibitOpaque);
    VIR_FORCE_CLOSE(logfile);
    VIR_FREE(seclabel);
    VIR_FREE(sec_managers);
    if (seclabelgen)
        virSecurityLabelDefFree(seclabeldef);
    virDomainChrSourceDefFree(monConfig);
    virObjectUnref(cfg);
    virObjectUnref(caps);
    return -1;
}


static virDomainObjPtr
qemuProcessAutoDestroy(virDomainObjPtr dom,
                       virConnectPtr conn,
                       void *opaque)
{
    virQEMUDriverPtr driver = opaque;
    qemuDomainObjPrivatePtr priv = dom->privateData;
    virObjectEventPtr event = NULL;

    VIR_DEBUG("vm=%s, conn=%p", dom->def->name, conn);

    if (priv->job.asyncJob) {
        VIR_DEBUG("vm=%s has long-term job active, cancelling",
                  dom->def->name);
        qemuDomainObjDiscardAsyncJob(driver, dom);
    }

    if (qemuDomainObjBeginJob(driver, dom,
                              QEMU_JOB_DESTROY) < 0)
        goto cleanup;

    VIR_DEBUG("Killing domain");

    qemuProcessStop(driver, dom, VIR_DOMAIN_SHUTOFF_DESTROYED,
                    VIR_QEMU_PROCESS_STOP_MIGRATED);

    virDomainAuditStop(dom, "destroyed");
    event = virDomainEventLifecycleNewFromObj(dom,
                                     VIR_DOMAIN_EVENT_STOPPED,
                                     VIR_DOMAIN_EVENT_STOPPED_DESTROYED);

    qemuDomainObjEndJob(driver, dom);

    if (!dom->persistent)
        qemuDomainRemoveInactive(driver, dom);

    if (event)
        qemuDomainEventQueue(driver, event);

 cleanup:
    return dom;
}

int qemuProcessAutoDestroyAdd(virQEMUDriverPtr driver,
                              virDomainObjPtr vm,
                              virConnectPtr conn)
{
    VIR_DEBUG("vm=%s, conn=%p", vm->def->name, conn);
    return virCloseCallbacksSet(driver->closeCallbacks, vm, conn,
                                qemuProcessAutoDestroy);
}

int qemuProcessAutoDestroyRemove(virQEMUDriverPtr driver,
                                 virDomainObjPtr vm)
{
    int ret;
    VIR_DEBUG("vm=%s", vm->def->name);
    ret = virCloseCallbacksUnset(driver->closeCallbacks, vm,
                                 qemuProcessAutoDestroy);
    return ret;
}

bool qemuProcessAutoDestroyActive(virQEMUDriverPtr driver,
                                  virDomainObjPtr vm)
{
    virCloseCallback cb;
    VIR_DEBUG("vm=%s", vm->def->name);
    cb = virCloseCallbacksGet(driver->closeCallbacks, vm, NULL);
    return cb == qemuProcessAutoDestroy;
}