- 17 7月, 2013 1 次提交
-
-
由 Jiri Kosina 提交于
Introduce a method for run-time instruction patching on a live SMP kernel based on int3 breakpoint, completely avoiding the need for stop_machine(). The way this is achieved: - add a int3 trap to the address that will be patched - sync cores - update all but the first byte of the patched range - sync cores - replace the first byte (int3) by the first byte of replacing opcode - sync cores According to http://lkml.indiana.edu/hypermail/linux/kernel/1001.1/01530.html synchronization after replacing "all but first" instructions should not be necessary (on Intel hardware), as the syncing after the subsequent patching of the first byte provides enough safety. But there's not only Intel HW out there, and we'd rather be on a safe side. If any CPU instruction execution would collide with the patching, it'd be trapped by the int3 breakpoint and redirected to the provided "handler" (which would typically mean just skipping over the patched region, acting as "nop" has been there, in case we are doing nop -> jump and jump -> nop transitions). Ftrace has been using this very technique since 08d636b6 ("ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine") for ages already, and jump labels are another obvious potential user of this. Based on activities of Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> a few years ago. Reviewed-by: NSteven Rostedt <rostedt@goodmis.org> Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307121102440.29788@pobox.suse.czSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 12 7月, 2013 1 次提交
-
-
由 Dave Hansen 提交于
I completely botched understanding the calling conventions of do_div(). I assumed that do_div() returned the result instead of realizing that it modifies its argument and returns a remainder. The side-effect from this would be bogus numbers for the "msecs" value in the warning messages: INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs Note, there was a second fix posted by Stephane Eranian for a separate patch which I also botched: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 7月, 2013 1 次提交
-
-
由 Michel Lespinasse 提交于
Since all architectures have been converted to use vm_unmapped_area(), there is no remaining use for the free_area_cache. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 7月, 2013 11 次提交
-
-
由 Kyungsik Lee 提交于
Integrates the LZ4 decompression code to the arm pre-boot code. Signed-off-by: NKyungsik Lee <kyungsik.lee@lge.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Cc: Yann Collet <yann.collet.73@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Merge together the unicore32, arm, and x86 reboot= command line parameter handling. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Prepare for the moving the parsing of reboot= to the generic kernel code by making reboot_mode into a more generic form. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Miguel Boton <mboton.lkml@gmail.com> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
flush_ptrace_hw_breakpoint() destroys the counters set by ptrace, but "leaks" ->debugreg6 and ->ptrace_dr7. The problem is minor, but still it doesn't look right and flush_thread() did this until commit 66cb5917 ("hw-breakpoints: use the new wrapper routines to access debug registers in process/thread code"). Now that PTRACE_DETACH does flush_ too this makes even more sense. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_set_debugreg() is trivial but looks horrible. Kill the unnecessary goto's and return's to cleanup the code. This matches ptrace_get_debugreg() which also needs the trivial whitespace cleanups. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events") introduced the minor regression. Before this commit PTRACE_POKEUSER DR7, enableDR0 PTRACE_POKEUSER DR0, address was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not previously initialized by PTRACE_POKEUSER(DR0). Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0) if !bp && !disabled. This fixes watchpoint-zeroaddr from ptrace-tests, see https://bugzilla.redhat.com/show_bug.cgi?id=660204. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NJan Kratochvil <jan.kratochvil@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
No functional changes, preparation. Extract the "register breakpoint" code from ptrace_get_debugreg() into the new/generic helper, ptrace_register_breakpoint(). It will have more users. The patch also adds another simple helper, ptrace_fill_bp_fields(), to factor out the arch_bp_generic_fields() logic in register/modify. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true) unless second_pass, this buys nothing but complicates the code and means that we always do the main loop twice even if "disabled" was never true. The comment says: Don't unregister the breakpoints right-away, unless all register_user_hw_breakpoint() requests have succeeded. Firstly, we do not do register_user_hw_breakpoint(), it was removed by commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events"). We are going to restore register_user_hw_breakpoint() (see the next patch) but this doesn't matter: after commit 44234adc ("hw-breakpoints: Modify breakpoints without unregistering them") perf_event_disable() can not hurt, hw_breakpoint_del() does not free the slot. Remove the "second_pass" check from the main loop and simplify the code. Since we have to check "bp != NULL" anyway, the patch also removes the same check in ptrace_modify_breakpoint() and moves the comment into ptrace_write_dr7(). With this patch the second pass is only needed to restore the saved old_dr7. This should never fail, so the patch adds WARN_ON() to catch the potential problems as Frederic suggested. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_write_dr7() looks unnecessarily overcomplicated. We can factor out ptrace_modify_breakpoint() and do not do "continue" twice, just we need to pass the proper "disabled" argument to ptrace_modify_breakpoint(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit 87dc669b ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints and does a couple of "while at it" cleanups, it doesn't remove other changes from the reverted commit. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
The old codes accumulate addr to get right pmd, however, currently pmds are preallocated and transfered as a parameter, there is unnecessary to accumulate addr variable any more, this patch remove it. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 7月, 2013 2 次提交
-
-
由 Peter Zijlstra 提交于
As Linus said its not an error to not have an AMD IOMMU; esp. when you're not even running on an AMD platform. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Link: http://lkml.kernel.org/r/20130703075542.GF23916@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 7月, 2013 9 次提交
-
-
由 Gleb Natapov 提交于
Some userspaces do not preserve unusable property. Since usable segment has to be present according to VMX spec we can use present property to amend userspace bug by making unusable segment always nonpresent. vmx_segment_access_rights() already marks nonpresent segment as unusable. Cc: stable@vger.kernel.org # 3.9+ Reported-by: NStefan Pietsch <stefan.pietsch@lsexperts.de> Tested-by: NStefan Pietsch <stefan.pietsch@lsexperts.de> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Alexandre Bounine 提交于
Add a configuration option to build RapidIO subsystem core code as a loadable kernel module. Currently this option is available only for x86-based platforms, with the additional patch for PowerPC planned to be provided later. This patch replaces kernel command line parameter "riohdid=" with its module-specific analog "rapidio.hdid=". Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Because it is not used. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiang Liu 提交于
Prepare for removing num_physpages and simplify mem_init(). Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiang Liu 提交于
Concentrate code to modify totalram_pages into the mm core, so the arch memory initialized code doesn't need to take care of it. With these changes applied, only following functions from mm core modify global variable totalram_pages: free_bootmem_late(), free_all_bootmem(), free_all_bootmem_node(), adjust_managed_page_count(). With this patch applied, it will be much more easier for us to keep totalram_pages and zone->managed_pages in consistence. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiang Liu 提交于
In order to simpilify management of totalram_pages and zone->managed_pages, make __free_pages_bootmem() only available at boot time. With this change applied, __free_pages_bootmem() will only be used by bootmem.c and nobootmem.c at boot time, so mark it as __init. Other callers of __free_pages_bootmem() have been converted to use free_reserved_page(), which handles totalram_pages and zone->managed_pages in a safer way. This patch also fix a bug in free_pagetable() for x86_64, which should increase zone->managed_pages instead of zone->present_pages when freeing reserved pages. And now we have managed_pages_count_lock to protect totalram_pages and zone->managed_pages, so remove the redundant ppb_lock lock in put_page_bootmem(). This greatly simplifies the locking rules. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiang Liu 提交于
Commit "mm: introduce new field 'managed_pages' to struct zone" assumes that all highmem pages will be freed into the buddy system by function mem_init(). But that's not always true, some architectures may reserve some highmem pages during boot. For example PPC may allocate highmem pages for giagant HugeTLB pages, and several architectures have code to check PageReserved flag to exclude highmem pages allocated during boot when freeing highmem pages into the buddy system. So treat highmem pages in the same way as normal pages, that is to: 1) reset zone->managed_pages to zero in mem_init(). 2) recalculate managed_pages when freeing pages into the buddy system. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Minchan Kim <minchan@kernel.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michel Lespinasse <walken@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiang Liu 提交于
Use common help function free_reserved_area() to simplify code. Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelyanov 提交于
The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 7月, 2013 1 次提交
-
-
由 Seiji Aguchi 提交于
Reschedule vector tracepoints may be called in cpu idle state. This causes lockdep check warning below. The tracepoint requires rcu but for accuracy it also requires irq_enter() (tracepoints record the irq context), thus, the tracepoint interrupt handler should be calling irq_enter() and not rcu_irq_enter() (irq_enter() calls rcu_irq_enter()). So, add irq_enter/exit() to smp_trace_reschedule_interrupt() with common pre/post processing functions, smp_entering_irq() and exiting_irq() (exiting_irq() calls just irq_exit() in arch/x86/include/asm/apic.h), because these can be shared among reschedule, call_function, and call_function_single vectors. [ 50.720557] Testing event reschedule_exit: [ 50.721349] [ 50.721502] =============================== [ 50.721835] [ INFO: suspicious RCU usage. ] [ 50.722169] 3.10.0-rc6-00004-gcf910e83 #190 Not tainted [ 50.722582] ------------------------------- [ 50.722915] /c/kernel-tests/src/linux/arch/x86/include/asm/trace/irq_vectors.h:50 suspicious rcu_dereference_check() usage! [ 50.723770] [ 50.723770] other info that might help us debug this: [ 50.723770] [ 50.724385] [ 50.724385] RCU used illegally from idle CPU! [ 50.724385] rcu_scheduler_active = 1, debug_locks = 0 [ 50.725232] RCU used illegally from extended quiescent state! [ 50.725690] no locks held by swapper/0/0. [ 50.726010] [ 50.726010] stack backtrace: [...] Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com> Reviewed-by: NSteven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/51CDCFA3.9080101@hds.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 6月, 2013 4 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Vrabel 提交于
Adjustments to Xen's persistent clock via update_persistent_clock() don't actually persist, as the Xen wallclock is a software only clock and modifications to it do not modify the underlying CMOS RTC. The x86_platform.set_wallclock hook is there to keep the hardware RTC synchronized. On a guest this is pointless. On Dom0 we can use the native implementaion which actually updates the hardware RTC, but we still need to keep the software emulation of RTC for the guests up to date. The subscription to the pvclock_notifier allows us to emulate this easily. The notifier is called at every tick and when the clock was set. Right now we only use that notifier when the clock was set, but due to the fact that it is called periodically from the timekeeping update code, we can utilize it to emulate the NTP driven drift compensation of update_persistant_clock() for the Xen wall (software) clock. Add a 11 minutes periodic update to the pvclock_gtod notifier callback to achieve that. The static variable 'next' which maintains that 11 minutes update cycle is protected by the core code serialization so there is no need to add a Xen specific serialization mechanism. [ tglx: Massaged changelog and added a few comments ] Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-6-git-send-email-david.vrabel@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David Vrabel 提交于
Currently the Xen wallclock is only updated every 11 minutes if NTP is synchronized to its clock source (using the sync_cmos_clock() work). If a guest is started before NTP is synchronized it may see an incorrect wallclock time. Use the pvclock_gtod notifier chain to receive a notification when the system time has changed and update the wallclock to match. This chain is called on every timer tick and we want to avoid an extra (expensive) hypercall on every tick. Because dom0 has historically never provided a very accurate wallclock and guests do not expect one, we can do this simply: the wallclock is only updated if the clock was set. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-5-git-send-email-david.vrabel@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Laszlo Ersek 提交于
... because the "clock_event_device framework" already accounts for idle time through the "event_handler" function pointer in xen_timer_interrupt(). The patch is intended as the completion of [1]. It should fix the double idle times seen in PV guests' /proc/stat [2]. It should be orthogonal to stolen time accounting (the removed code seems to be isolated). The approach may be completely misguided. [1] https://lkml.org/lkml/2011/10/6/10 [2] http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01068.html John took the time to retest this patch on top of v3.10 and reported: "idle time is correctly incremented for pv and hvm for the normal case, nohz=off and nohz=idle." so lets put this patch in. CC: stable@vger.kernel.org Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NJohn Haxby <john.haxby@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 28 6月, 2013 3 次提交
-
-
由 Borislav Petkov 提交于
Infact, let the compiler enter the function name so that there are no discrepancies. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1372369996-20556-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Qiaowei Ren 提交于
These logs come from tboot (Trusted Boot, an open source, pre-kernel/VMM module that uses Intel TXT to perform a measured and verified launch of an OS kernel/VMM.). Signed-off-by: NQiaowei Ren <qiaowei.ren@intel.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: Gang Wei <gang.wei@intel.com> Link: http://lkml.kernel.org/r/1372053333-21788-1-git-send-email-qiaowei.ren@intel.com [ Beautified the code a bit. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Chen Gong 提交于
Update some SRAR severity conditions check to make it clearer, according to latest Intel SDM Vol 3(June 2013), table 15-20. Signed-off-by: NChen Gong <gong.chen@linux.intel.com> Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 27 6月, 2013 7 次提交
-
-
由 Gleb Natapov 提交于
This reverts most of the f1ed0450. After the commit kvm_apic_set_irq() no longer returns accurate information about interrupt injection status if injection is done into disabled APIC. RTC interrupt coalescing tracking relies on the information to be accurate and cannot recover if it is not. Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Yoshihiro YUNOMAE 提交于
Add a tracepoint write_tsc_offset for tracing TSC offset change. We want to merge ftrace's trace data of guest OSs and the host OS using TSC for timestamp in chronological order. We need "TSC offset" values for each guest when merge those because the TSC value on a guest is always the host TSC plus guest's TSC offset. If we get the TSC offset values, we can calculate the host TSC value for each guest events from the TSC offset and the event TSC value. The host TSC values of the guest events are used when we want to merge trace data of guests and the host in chronological order. (Note: the trace_clock of both the host and the guest must be set x86-tsc in this case) This tracepoint also records vcpu_id which can be used to merge trace data for SMP guests. A merge tool will read TSC offset for each vcpu, then the tool converts guest TSC values to host TSC values for each vcpu. TSC offset is stored in the VMCS by vmx_write_tsc_offset() or vmx_adjust_tsc_offset(). KVM executes the former function when a guest boots. The latter function is executed when kvm clock is updated. Only host can read TSC offset value from VMCS, so a host needs to output TSC offset value when TSC offset is changed. Since the TSC offset is not often changed, it could be overwritten by other frequent events while tracing. To avoid that, I recommend to use a special instance for getting this event: 1. set a instance before booting a guest # cd /sys/kernel/debug/tracing/instances # mkdir tsc_offset # cd tsc_offset # echo x86-tsc > trace_clock # echo 1 > events/kvm/kvm_write_tsc_offset/enable 2. boot a guest Signed-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Takuya Yoshikawa 提交于
Without this information, users will just see unexpected performance problems and there is little chance we will get good reports from them: note that mmio generation is increased even when we just start, or stop, dirty logging for some memory slot, in which case users cannot expect all shadow pages to be zapped. printk_ratelimited() is used for this taking into account the problems that we can see the information many times when we start multiple VMs and guests can trigger this by reading ROM in a loop for example. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
Document it to Documentation/virtual/kvm/mmu.txt Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
Document write_flooding_count to Documentation/virtual/kvm/mmu.txt Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
Document it to Documentation/virtual/kvm/mmu.txt Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
Drop kvm_mmu_zap_mmio_sptes and use kvm_mmu_invalidate_zap_all_pages instead to handle mmio generation number overflow Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: NGleb Natapov <gleb@redhat.com> Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-