- 17 7月, 2013 1 次提交
-
-
由 Jiri Kosina 提交于
Introduce a method for run-time instruction patching on a live SMP kernel based on int3 breakpoint, completely avoiding the need for stop_machine(). The way this is achieved: - add a int3 trap to the address that will be patched - sync cores - update all but the first byte of the patched range - sync cores - replace the first byte (int3) by the first byte of replacing opcode - sync cores According to http://lkml.indiana.edu/hypermail/linux/kernel/1001.1/01530.html synchronization after replacing "all but first" instructions should not be necessary (on Intel hardware), as the syncing after the subsequent patching of the first byte provides enough safety. But there's not only Intel HW out there, and we'd rather be on a safe side. If any CPU instruction execution would collide with the patching, it'd be trapped by the int3 breakpoint and redirected to the provided "handler" (which would typically mean just skipping over the patched region, acting as "nop" has been there, in case we are doing nop -> jump and jump -> nop transitions). Ftrace has been using this very technique since 08d636b6 ("ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine") for ages already, and jump labels are another obvious potential user of this. Based on activities of Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> a few years ago. Reviewed-by: NSteven Rostedt <rostedt@goodmis.org> Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307121102440.29788@pobox.suse.czSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 13 7月, 2013 3 次提交
-
-
由 Al Viro 提交于
[suggested by Rasmus Villemoes] make O_DIRECTORY | O_RDWR part of O_TMPFILE; that will fail on old kernels in a lot more cases than what I came up with. And make sure O_CREAT doesn't get there... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Olof Johansson 提交于
OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC support is no longer enabled by default. Add them back. Enable new ethernet driver for sunxi. The i.MX console options moved due to resorting, no functional change. Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Vincent Stehlé 提交于
- Add i.MX serial console support. This gives us the boot messages on UART on e.g. the i.MX6Q sabre sd platform. - Add the necessary config options, to allow booting with NFS root on an i.MX6 sabre sd. - Add Freescale LPUART serial console support. This gives us the boot messages on UART on e.g. the Vybrid VF610 Tower board. Signed-off-by: NVincent Stehlé <vincent.stehle@freescale.com> Cc: Russell King <linux@arm.linux.org.uk> [olof: squashed three commits down to one] Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 12 7月, 2013 3 次提交
-
-
由 Dave Hansen 提交于
I completely botched understanding the calling conventions of do_div(). I assumed that do_div() returned the result instead of realizing that it modifies its argument and returns a remainder. The side-effect from this would be bogus numbers for the "msecs" value in the warning messages: INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.114 msecs Note, there was a second fix posted by Stephane Eranian for a separate patch which I also botched: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20130708214404.B0B6EA66@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Russell King 提交于
The watchdog infrastructure in Dove is no different from that in Orion5x or Kirkwood, so let's enable it for Dove. The only things missing are a few register settings in Dove's bridge-regs.h. Rather than duplicating the same register bit masks for the RSTOUTn_MASK and BRIDGE_CAUSE registers, move the definitions into the watchdog driver itself. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NJason Cooper <jason@lakedaemon.net> Tested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Viresh Kumar 提交于
Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu interrupt (usually interrupt #30), and the GIC configuration should flag it as such. With this setup, request_irq() should fail, and the right API is request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq(). Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the right CPU. There are no users of this driver since a long time and it makes more sense to get rid of it as nobody is looking to fix it. In case somebody wakes up after this has been removed and needs it, please revert this driver and pick these updates (These were never pushed to mainline): http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 11 7月, 2013 5 次提交
-
-
由 Michel Lespinasse 提交于
Since all architectures have been converted to use vm_unmapped_area(), there is no remaining use for the free_area_cache. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eliezer Tamir 提交于
Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier DANET 提交于
Commit e4c6bfd2 ("mm: rearrange vm_area_struct for fewer cache misses") changed the layout of the vm_area_struct structure, it broke several SPARC32 assembly routines which used numerical constants for accessing the vm_mm field. This patch defines the VMA_VM_MM constant to replace the immediate values. Signed-off-by: NOlivier DANET <odanet@caramail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Larsson 提交于
Even if data snooping is enabled, without separate snoop tags snooping will not work when the MMU is enabled. Signed-off-by: NAndreas Larsson <andreas@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Gang 提交于
For the related next strcpy(), the destination length is less than 512, but the source maximize length may be 'OPROMMAXPARAM' (4096) which is more than 512. One work flow may: openprom_sunos_ioctl() -> if (cmd == OPROMSETOPT) getstrings() -> will alloc buffer with size 'OPROMMAXPARAM'. opromsetopt() -> devide the buffer into 'var' and 'value' of_set_property() -> pass prom_setprop() -> pass ldom_set_var() And do not mind the additional 4 alignment buffer increasing, since 'sizeof(pkt) - sizeof(pkt.header)' is 4 alignment at least. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2013 27 次提交
-
-
由 Michal Simek 提交于
The reason is that other applications like strace think that every __NR_xx is syscall. Also __NR_syscalls is not used by user applications/libs. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Jason Liu 提交于
When the local timer freq changed, the twd_update_frequency function should be run all the CPUs include itself, otherwise, the twd freq will not get updated and the local timer will not run correcttly. smp_call_function will run functions on all other CPUs, but not include himself, this is not correct,use on_each_cpu instead to fix this issue. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NJason Liu <r64343@freescale.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Fabio Estevam 提交于
imx_v6_v7_defconfig handles both multi-core and single-core SoCs, and it has CONFIG_SMP=y selected by default. With such config we cannot select ARM_ERRATA_364296, as it depends on !SMP. Let ARM_ERRATA_364296 be undependent on CONFIG_SMP, so that we can select this erratum for the ARM1136 SoCs, even if CONFIG_SMP=y is enabled. Reviewed-by: NDave Martin <Dave.Martin@arm.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Helge Deller 提交于
When running the LTP testsuite one may hit this kernel BUG() with the write06 testcase: kernel BUG at mm/filemap.c:2023! CPU: 1 PID: 8614 Comm: writev01 Not tainted 3.10.0-rc7-64bit-c3000+ #6 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401e6e84 00000000401e6e88 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001fbe0380820 CPU: 1 CR30: 00000000bef80000 CR31: ffffffffffffffff ORIG_R28: 00000000bdc192c0 IAOQ[0]: iov_iter_advance+0x3c/0xc0 IAOQ[1]: iov_iter_advance+0x40/0xc0 RP(r2): generic_file_buffered_write+0x204/0x3f0 Backtrace: [<00000000401e764c>] generic_file_buffered_write+0x204/0x3f0 [<00000000401eab24>] __generic_file_aio_write+0x244/0x448 [<00000000401eadc0>] generic_file_aio_write+0x98/0x150 [<000000004024f460>] do_sync_readv_writev+0xc0/0x130 [<000000004025037c>] compat_do_readv_writev+0x12c/0x340 [<00000000402505f8>] compat_writev+0x68/0xa0 [<0000000040251d88>] compat_SyS_writev+0x98/0xf8 Reason for this crash is a gcc miscompilation in the fault handlers of pa_memcpy() which return the fault address instead of the copied bytes. Since this seems to be a generic problem with gcc-4.7.x (and below), it's better to simplify the fault handlers in pa_memcpy to avoid this problem. Here is a simple reproducer for the problem: int main(int argc, char **argv) { int fd, nbytes; struct iovec wr_iovec[] = { { "TEST STRING ",32}, { (char*)0x40005000,32} }; // random memory. fd = open(DATA_FILE, O_RDWR | O_CREAT, 0666); nbytes = writev(fd, wr_iovec, 2); printf("return value = %d, errno %d (%s)\n", nbytes, errno, strerror(errno)); return 0; } In addition, John David Anglin wrote: There is no gcc PR as pa_memcpy is not legitimate C code. There is an implicit assumption that certain variables will contain correct values when an exception occurs and the code randomly jumps to one of the exception blocks. There is no guarantee of this. If a PR was filed, it would likely be marked as invalid. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 John David Anglin 提交于
I still see the occasional random segv on rp3440. Looking at one of these (a code 15), it appeared the problem must be with the cache handling of anonymous pages. Reviewing this, I noticed that the space register %sr1 might be being clobbered when we flush an anonymous page. Register %sr1 is used for TLB purges in a couple of places. These purges are needed on PA8800 and PA8900 processors to ensure cache consistency of flushed cache lines. The solution here is simply to move the %sr1 load into the TLB lock region needed to ensure that one purge executes at a time on SMP systems. This was already the case for one use. After a few days of operation, I haven't had a random segv on my rp3440. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
If the value which should be moved into a space register is zero, we can optimize the inline assembly to become "mtsp %r0,%srX". Signed-off-by: NHelge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 3.10
-
由 Helge Deller 提交于
The latest PA-RISC Boot Loader (palo) allows loading of gzip compressed vmlinuz kernels. So let's now switch to build a vmlinuz file when we build a palo boot image. PALO version 1.9 (or higher) is required for this which is available at git://git.kernel.org/pub/scm/linux/kernel/git/deller/palo.gitSigned-off-by: NHelge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 3.10
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 3.10
-
由 Kyungsik Lee 提交于
Integrates the LZ4 decompression code to the arm pre-boot code. Signed-off-by: NKyungsik Lee <kyungsik.lee@lge.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Cc: Yann Collet <yann.collet.73@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Merge together the unicore32, arm, and x86 reboot= command line parameter handling. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Prepare for the moving the parsing of reboot= to the generic kernel code by making reboot_mode into a more generic form. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
These restart_mode fields are not used at all. Remove them to make moving the reboot= cmdline options to the general kernel easier. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Prepare for the moving the parsing of reboot= to the generic kernel code by making reboot_mode into a more generic form. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
Prepare for the moving the parsing of reboot= to the generic kernel code by making reboot_mode into a more generic form. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Miguel Boton <mboton.lkml@gmail.com> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
flush_ptrace_hw_breakpoint() destroys the counters set by ptrace, but "leaks" ->debugreg6 and ->ptrace_dr7. The problem is minor, but still it doesn't look right and flush_thread() did this until commit 66cb5917 ("hw-breakpoints: use the new wrapper routines to access debug registers in process/thread code"). Now that PTRACE_DETACH does flush_ too this makes even more sense. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_set_debugreg() is trivial but looks horrible. Kill the unnecessary goto's and return's to cleanup the code. This matches ptrace_get_debugreg() which also needs the trivial whitespace cleanups. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events") introduced the minor regression. Before this commit PTRACE_POKEUSER DR7, enableDR0 PTRACE_POKEUSER DR0, address was perfectly valid, now PTRACE_POKEUSER(DR7) fails if DR0 was not previously initialized by PTRACE_POKEUSER(DR0). Change ptrace_write_dr7() to do ptrace_register_breakpoint(addr => 0) if !bp && !disabled. This fixes watchpoint-zeroaddr from ptrace-tests, see https://bugzilla.redhat.com/show_bug.cgi?id=660204. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NJan Kratochvil <jan.kratochvil@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
No functional changes, preparation. Extract the "register breakpoint" code from ptrace_get_debugreg() into the new/generic helper, ptrace_register_breakpoint(). It will have more users. The patch also adds another simple helper, ptrace_fill_bp_fields(), to factor out the arch_bp_generic_fields() logic in register/modify. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_write_dr7() skips ptrace_modify_breakpoint(disabled => true) unless second_pass, this buys nothing but complicates the code and means that we always do the main loop twice even if "disabled" was never true. The comment says: Don't unregister the breakpoints right-away, unless all register_user_hw_breakpoint() requests have succeeded. Firstly, we do not do register_user_hw_breakpoint(), it was removed by commit 24f1e32c ("hw-breakpoints: Rewrite the hw-breakpoints layer on top of perf events"). We are going to restore register_user_hw_breakpoint() (see the next patch) but this doesn't matter: after commit 44234adc ("hw-breakpoints: Modify breakpoints without unregistering them") perf_event_disable() can not hurt, hw_breakpoint_del() does not free the slot. Remove the "second_pass" check from the main loop and simplify the code. Since we have to check "bp != NULL" anyway, the patch also removes the same check in ptrace_modify_breakpoint() and moves the comment into ptrace_write_dr7(). With this patch the second pass is only needed to restore the saved old_dr7. This should never fail, so the patch adds WARN_ON() to catch the potential problems as Frederic suggested. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
ptrace_write_dr7() looks unnecessarily overcomplicated. We can factor out ptrace_modify_breakpoint() and do not do "continue" twice, just we need to pass the proper "disabled" argument to ptrace_modify_breakpoint(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit e0ac8457 ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit bf0b8f4b ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NWill Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit 07fa7a0a ("hw_breakpoints: Fix racy access to ptrace breakpoints") and removes ptrace_get/put_breakpoints() added by other commits. The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NMichael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit 87dc669b ("hw_breakpoints: Fix racy access to ptrace breakpoints"). The patch was fine but we can no longer race with SIGKILL after commit 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL"), the __TASK_TRACED tracee can't be woken up and ->ptrace_bps[] can't go away. The patch only removes ptrace_get_breakpoints/ptrace_put_breakpoints and does a couple of "while at it" cleanups, it doesn't remove other changes from the reverted commit. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
The old codes accumulate addr to get right pmd, however, currently pmds are preallocated and transfered as a parameter, there is unnecessary to accumulate addr variable any more, this patch remove it. Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
A few remaining architectures directly kill the page faulting task in an out of memory situation. This is usually not a good idea since that task might not even use a significant amount of memory and so may not be the optimal victim to resolve the situation. Since 2.6.29's 1c0fe6e3 ("mm: invoke oom-killer from page fault") there is a hook that architecture page fault handlers are supposed to call to invoke the OOM killer and let it pick the right task to kill. Convert the remaining architectures over to this hook. To have the previous behavior of simply taking out the faulting task the vm.oom_kill_allocating_task sysctl can be set to 1. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc bits] Cc: James Hogan <james.hogan@imgtec.com> Cc: David Howells <dhowells@redhat.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 7月, 2013 1 次提交
-
-
由 James Hogan 提交于
In csum_tcpudp_nofold, add 1 if the carry bit is set after adding the destination IP address (32 bits) to the checksum (16 bits). The lack of carry handling for this particular addition meant that a destination address of *.*.255.255 (e.g. certain broadcasts) sometimes resulted in an incorrect checksum. This bug has been present in the Meta port since the code was written in the 2.4 days. Reported-by: NMarcin Nowakowski <Marcin.Nowakowski@pure.com> Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-