- 16 11月, 2011 10 次提交
-
-
由 Johan Hovold 提交于
Remove unnecessary re-fills of bulk urbs whose fields have not changed since port probe. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove unnecessary reinitialisations of completion and context fields of urbs. Compile-only tested. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove unnecessary reinitialisations of urb->dev before each submission, which were based on the (no longer valid) assumption that serial->dev will be set to NULL on close. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Support Department <support@connecttech.com> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove variable port0 from open as it is not used. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove incorrect and unnecessary check for port->read_urb which is not set to NULL, contrary to what seems to be assumed, when urb is killed. Compile only-tested. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Fix regression introduced by commit 507ca9bc ([PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.) which inverted the logic in write_room so that it returns zero when the write urb is actually free. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove remaining changelogs from file headers (can still be retrieved through git). Remove even older changelog entries stored in Changelog.history. Remove outdated todo entries from belkin_sa. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 11月, 2011 1 次提交
-
-
由 Roland Koebler 提交于
Add mark and space parity support. Signed-off-by: NRoland Koebler <r.koebler@yahoo.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
The situation up to this point meant that module.h was pretty much everywhere, regardless of whether you asked for it or not. We are fixing that, so give the USB folks who want it an actual include of it. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 19 10月, 2011 7 次提交
-
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Stuge 提交于
Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: NPeter Stuge <peter@stuge.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 05 10月, 2011 1 次提交
-
-
由 Hakan Kvist 提交于
Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by: NHakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by: NOskar Andero <oskar.andero@sonyericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 9月, 2011 1 次提交
-
-
由 Rigbert Hamisch 提交于
add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by: NRigbert Hamisch <rigbert@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 9月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 9月, 2011 1 次提交
-
-
由 Eric Benoit 提交于
Add vendor and product ID for the SMART USB to serial adapter. These were meant to be used with their SMART Board whiteboards, but can be re-purposed for other tasks. Tested and working (at at least 9600 bps). Signed-off-by: NEric Benoit <eric@ecks.ca> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 9月, 2011 1 次提交
-
-
由 Richard Hartmann 提交于
Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by: NRichard Hartmann <richih.mailinglist@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 9月, 2011 4 次提交
-
-
由 Dan Williams 提交于
IDs found in the Windows driver's ZTEusbnet.inf file from the ZTE MF100 drivers (O2 UK). Also fixes the ZTE MF626 device since it really is distinct from the 4G Systems stick and apparently needs the net interface blacklisted too, while there's no indication (yet) that the 4G Systems stick does. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
That's what the blacklist is for... Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
It's cleaner than the array stuff, and we're about to add a bunch more blacklist entries. Second, there are devices that need both the sendsetup and the reserved interface blacklists, which the current code can't accommodate. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 8月, 2011 1 次提交
-
-
由 Michał Sroczyński 提交于
Signed-off-by: NMichal Sroczynski <msroczyn@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 8月, 2011 1 次提交
-
-
Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 8月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
USB_SERIAL_IPW needs to select USB_SERIAL_WWAN to fix build errors: ipw.c:(.text+0x333841): undefined reference to `usb_wwan_close' ipw.c:(.text+0x3339e6): undefined reference to `usb_wwan_open' ipw.c:(.text+0x333bb9): undefined reference to `usb_wwan_release' drivers/built-in.o:(.data+0x29dac): undefined reference to `usb_wwan_startup' drivers/built-in.o:(.data+0x29db4): undefined reference to `usb_wwan_disconnect' drivers/built-in.o:(.data+0x29dd4): undefined reference to `usb_wwan_write' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 8月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 8月, 2011 5 次提交
-
-
由 Oliver Neukum 提交于
From 2d487c10136f76cf3705881d34868e8592839cfe Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oliver@neukum.org> Date: Tue, 12 Jul 2011 15:36:51 +0200 Subject: [PATCH] USB: ipw: convert to usb-wwan framework This patch allows the ipw driver to use the multibuffer infrastructure of usb-wwan. This improves speed. Signed-off-by: Oliver Neukum<oneukum@suse.de> Tested-by: NMichal Hybner <dta081@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
Currently the Option driver avoids binding interface 1 on Huawei K3765 and K4505 broadband modems as it should be handled by the cdc_ether driver instead. This patch ensures we don't bind the interface 2 on those devices as that is CDC_DATA. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gavin.zhu 提交于
Signed-off-by: NGavin.zhu <gavin.kx@qq.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K4605 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by suitable network driver. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Signed-off-by: NAlex Chiang <achiang@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K3806 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Signed-off-by: NAlex Chiang <achiang@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 8月, 2011 1 次提交
-
-
由 Alan Stern 提交于
This patch (as1482) adds a macro for testing whether or not a pm_message value represents an autosuspend or autoresume (i.e., a runtime PM) event. Encapsulating this notion seems preferable to open-coding the test all over the place. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 11 8月, 2011 2 次提交
-
-
由 Artur Zimmer 提交于
Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: NArtur Zimmer <artur128@3dzimmer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Florian Echtler 提交于
A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: NFlorian Echtler <floe@butterbrot.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-