Remove unnecessary re-fills of bulk urbs whose fields have not changed
since port probe.

Compile-only tested.

Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnecessary reinitialisations of completion and context fields of
urbs.

Compile-only tested.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnecessary reinitialisations of urb->dev before each submission,
which were based on the (no longer valid) assumption that serial->dev
will be set to NULL on close.

Compile-only tested.

Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
Cc: Lonnie Mendez <dignome@gmail.com>
Cc: Peter Berger <pberger@brimson.com>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Support Department <support@connecttech.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove variable port0 from open as it is not used.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove incorrect and unnecessary check for port->read_urb which is not
set to NULL, contrary to what seems to be assumed, when urb is killed.

Compile only-tested.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use port write_urbs_free mask rather than write_urb_busy field in struct
serial_port.

Compile-only tested.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use port write_urbs_free mask rather than write_urb_busy field in struct
serial_port.

Compile-only tested.

Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use port write_urbs_free mask rather than write_urb_busy field in struct
serial_port.

Compile-only tested.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix regression introduced by commit 507ca9bc ([PATCH] USB: add
ability for usb-serial drivers to determine if their write urb is
currently being used.) which inverted the logic in write_room so that it
returns zero when the write urb is actually free.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove remaining changelogs from file headers (can still be retrieved
through git).
Remove even older changelog entries stored in Changelog.history.
Remove outdated todo entries from belkin_sa.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use resource_size function on resource object
instead of explicit computation.

The semantic patch that makes this change is available
in scripts/coccinelle/api/resource_size.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/shuttle_usbat.c:173:22: warning:
|	symbol 'usbat_usb_ids' was not declared. Should
|	it be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/sddr55.c:51:22: warning: symbol
|	'sddr55_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/sddr09.c:74:22: warning: symbol
|	'sddr09_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warnings:

| drivers/usb/storage/realtek_cr.c:821:6: warning: symbol
|	'rts51x_invoke_transport' was not declared. Should
|	it be static?
|
| drivers/usb/storage/realtek_cr.c:980:5: warning: symbol
|	'realtek_cr_suspend' was not declared. Should it
|	be static?
|
| drivers/usb/storage/realtek_cr.c:518:23: warning: cast
|	truncates bits from constant value (fe47 becomes 47)
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/onetouch.c:72:22: warning: symbol
|	'onetouch_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/karma.c:62:22: warning: symbol
|	'karma_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/jumpshot.c:74:22: warning: symbol
|	'jumpshot_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/freecom.c:122:22: warning: symbol
|	'freecom_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/freecom.c:122:22: warning: symbol
|	'freecom_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warnings:

| drivers/usb/storage/ene_ub6250.c:45:22: warning: symbol
|	'ene_ub6250_usb_ids' was not declared. Should it
|	be static?
|
| drivers/usb/storage/ene_ub6250.c:780:5: warning: symbol
|	'ms_lib_alloc_logicalmap' was not declared. Should it
|	be static?
|
| drivers/usb/storage/ene_ub6250.c:2251:5: warning: symbol
|	'ms_scsi_irp' was not declared. Should it be static?
|
| drivers/usb/storage/ene_ub6250.c:638:29: warning: right shift by bigger
|	than source value
|
| drivers/usb/storage/ene_ub6250.c:639:29: warning: right shift by bigger
|	than source value
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/datafab.c:91:22: warning: symbol
|	'datafab_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

| drivers/usb/storage/cypress_atacb.c:46:22: warning:
|	symbol 'cypress_usb_ids' was not declared. Should
|	it be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following warning:

| drivers/usb/storage/alauda.c:142:22: warning: symbol
|	'alauda_usb_ids' was not declared. Should it
|	be static?
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When adding the ID of a composite device dynamically to a driver, all
hitherto unbound interfaces are bound to this driver regardless of their
class, which may not be intended.
The patch adds the option to tell the targeted interface class to a driver
via the "new_id" attribute, in addition to the device ID.
Also, it appends the ABI documentation accordingly.

Example:
$ echo "1234 2a2a ff" >/sys/bus/usb-serial/drivers/option1/new_id
will bind only vendor-specific interfaces to the 3G driver.
Signed-off-by: NJosua Dietze <digidietze@draisberghof.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Data Buffer Error as per spec section 4.15.1.1.2
results when there is Underrun or Overrun condition.

This error is considered non-fatal and never gets reported.
Its a very good indication on things going wrong at system level,
like running memory at much slower speed.

This is a good error to flag allowing system level corrections.

An issue was found with OMAP4460 board where DDR had to be run
at full speed and this logging helped.
Signed-off-by: NVikram Pandita <vikram.pandita@ti.com>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NVikram Pandita <vikram.pandita@ti.com>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add mark and space parity support.
Signed-off-by: NRoland Koebler <r.koebler@yahoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing
errors: If an URB was unlinked and the host controller hadn't gotten
any IRQs, it seemed likely that the IRQs were directed to the wrong
vector.

This warning hasn't come up in many years, as far as I know; interrupt
routing now seems to be well under control.  Therefore there's no
reason to keep the flag around any more.  This patch (as1495) finally
removes it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnecessary headers from the file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes the following sparse warnings:
drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rx byte count was off; instead use the hardware's count.  Tx packet
count was counting pre-TSO packets; instead count on-the-wire packets.
Report hardware dropped frame count as rx_fifo_errors.

- The count of transmitted packets reported by the forcedeth driver
  reports pre-TSO (TCP Segmentation Offload) packet counts and not the
  count of the number of packets sent on the wire. This change fixes
  the forcedeth driver to report the correct count. Fixed the code by
  copying the count stored in the NIC H/W to the value reported by the
  driver.

- Count rx_drop_frame errors as rx_fifo_errors:
  We see a lot of rx_drop_frame errors if we disable the rx bottom-halves
  for too long.  Normally, rx_fifo_errors would be counted in this case.
  The rx_drop_frame error count is private to forcedeth and is not
  reported by ifconfig or sysfs.  The rx_fifo_errors count is currently
  unused in the forcedeth driver.  It is reported by ifconfig as overruns.
  This change reports rx_drop_frame errors as rx_fifo_errors.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function ndo_get_stats() updates most of the stats from hardware
registers, making the manual updates un-needed. This change removes
these manual updates. Main exception is rx_missed_errors which needs
manual update.

Another exception is rx_packets, still updated manually in this commit
to make sure this patch doesn't change behavior of driver. This will
be addressed by a future patch.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to avoid a race, accidentally acknowledging an interrupt that
we didn't notice and won't immediately process.  This is based solely
on code inspection; it is not known if there was an actual bug here.
Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When forcedeth module is unloaded, there exists a path that can lead
to mod_timer() after del_timer_sync(), causing an oops. This patch
short-circuits this unneeded path, which originates in
nv_get_ethtool_stats().

Tested:
  x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic
  + rmmod/modprobe/ifconfig in a loop

Initial-Author: Salman Qazi <sqazi@google.com>
Discussion: http://patchwork.ozlabs.org/patch/123548/Signed-off-by: NDavid Decotigny <david.decotigny@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

since it uses the module facilities.
Reported-by: NWitold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For the files which are not themselves modular, we can change
them to include only the smaller export.h since all they are
doing is looking for EXPORT_SYMBOL.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491ec
SKB can be NULL at this point, at least for cdc-ncm.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not
defined.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>