- 25 5月, 2011 40 次提交
-
-
由 Mike Frysinger 提交于
Prefer MMR named checks over part-specific lists, condense duplicated code across different #ifdef branches, simplify CONFIG_PM ifdefs, and drop unused kgdb header. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
These are in linux/ptrace.h, so no need for us to duplicate them. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Sonic Zhang 提交于
Make sure we mark cache flushing as unsafe to kgdb in SMP mode so that kgdb doesn't flush things incorrectly on us. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Not sure when we stopped using this field, but nothing in the tree uses this now, so punt it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
After some cache setup reordering changesets, the blackfin_cpudata init was left behind. While cpu0's data was correct, cpu1's data was not. Not that big of a deal as these are only used in the cpuinfo output, but should still be fixed. So move the setup of these fields to the common cache setup function to avoid this happening again in the future. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The smp flush lines are too long and have too many newlines, so scale them back to match the other lines. The %p modifier shows "(null)" for 0, so use %08x instead. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Build the sound pieces that the board actually has into the kernel, and punt older devices that we discourage. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
This brings the parts in line with newer ones, and makes things easier to read at a glance. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
These files had a lot of whitespace damage, mostly due to copying and pasting original files that had damage. The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so punt them all. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Start a new common IRQ header and move all of the CEC pieces there. This lets the individual part headers worry just about its SIC defines. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Seems the ipipe code just copied & pasted the existing irq lookup logic, so pull the logic out of do_irq() and into a local helper, and convert the two users over to that. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The local ivg structs need not be exported, so mark them as static. Further, the "num_spurious" variable is only incremented and never actually read anywhere, so punt it. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Sonic Zhang 提交于
Since the on-chip L1 regions are not cacheable, there is no point in trying to flush/invalidate them. Plus, older Blackfin parts like to trigger an exception (like BF533-0.3). Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits) mach-ux500: set proper I2C platform data from MOP500s i2c-nomadik: break out single messsage transmission i2c-nomadik: reset the hw after status check i2c-nomadik: remove the unnecessary delay i2c-nomadik: change the TX and RX threshold i2c-nomadik: add code to retry on timeout failure i2c-nomadik: use pm_runtime API i2c-nomadik: print abort cause only on abort tag i2c-nomadik: correct adapter timeout initialization i2c-nomadik: remove the redundant error message i2c-nomadik: corrrect returned error numbers i2c-nomadik: fix speed enumerator i2c-nomadik: make i2c timeout specific per i2c bus i2c-nomadik: add regulator support i2c: i2c-sh_mobile bus speed platform data V2 i2c: i2c-sh_mobile clock string removal i2c-eg20t: Support new device ML7223 IOH i2c: tegra: Add de-bounce cycles. i2c: tegra: fix repeated start handling i2c: tegra: recover from spurious interrupt storm ...
-
由 Ben Dooks 提交于
Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
-
由 Linus Walleij 提交于
This specifies the new per-platform timeout per I2C bus and switches the I2C buses to fast mode, and increase the FIFO depth to 8 for reads and writes. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Linus Walleij 提交于
Reduce code size in the message transfer function by factoring out a single-message transfer function. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
In case of I2C timeout, reset the HW only after the HW status is read, otherwise the staus will be lost. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
The delay in the driver seems to be not needed, so remove it. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NMarkus Grape <markus.grape@stericsson.com> Tested-by: NPer Persson <per.xb.persson@stericsson.com> Tested-by: NChethan Krishna N <chethan.krishna@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
1) Increase RX FIFO threshold so that there is a reduction in the number of interrupts handled to complete a transaction. 2) Fill TX FIFO in the write function. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
It is seen that i2c-nomadik controller randomly stops generating the interrupts leading to a i2c timeout. As a workaround to this problem, add retries to the on going transfer on failure. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Rabin Vincent 提交于
Use the pm_runtime API for pins control. Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> [deleted some surplus runtime PM code] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
Modify the code to: 1)Print the cause of i2c failure only if the status is set to ABORT. 2)Print slave address on send/receive fail, will help in which slave failed. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
Correct the incorrect initialization of adapter timeout not to be in milliseconds, as it needs to be done in jiffies. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 srinidhi kasagar 提交于
The abort cause string itself is an error, so remove the redundant explicit error message. Signed-off-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
The code was returning bad error numbers or just -1 in some cases. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Linus Walleij 提交于
The I2C speed enumerators in the i2c-nomadik header file were in the wrong order. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Virupax Sadashivpetimath 提交于
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by: NVirupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jonas Aberg 提交于
This on-chip I2C controller needs to fetch the regulator representing its voltage domain so that it won't be switched off. Signed-off-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-parport: Various cleanups i2c-i801: Don't depend on other kernel driver config options i2c-i801: Check for vendor Fujitsu before probing for apanel i2c-i801: Don't probe for slaves on IDF channels i2c-i801: SMBus patch for Intel Panther Point DeviceIDs i2c/writing-clients: Fix foo_driver.id_table
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: Fix comment to match the code in journal_start() jbd/jbd2: remove obsolete summarise_journal_usage. jbd: Fix forever sleeping process in do_get_write_access() ext2: fix error msg when mounting fs with too-large blocksize jbd: fix fsync() tid wraparound bug ext3: Fix fs corruption when make_indexed_dir() fails ext3: Fix lock inversion in ext3_symlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: make plock operation killable dlm: remove shared message stub for recovery dlm: delayed reply message warning dlm: Remove superfluous call to recalc_sigpending()
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits) TOMOYO: Fix wrong domainname validation. SELINUX: add /sys/fs/selinux mount point to put selinuxfs CRED: Fix load_flat_shared_library() to initialise bprm correctly SELinux: introduce path_has_perm flex_array: allow 0 length elements flex_arrays: allow zero length flex arrays flex_array: flex_array_prealloc takes a number of elements, not an end SELinux: pass last path component in may_create SELinux: put name based create rules in a hashtable SELinux: generic hashtab entry counter SELinux: calculate and print hashtab stats with a generic function SELinux: skip filename trans rules if ttype does not match parent dir SELinux: rename filename_compute_type argument to *type instead of *con SELinux: fix comment to state filename_compute_type takes an objname not a qstr SMACK: smack_file_lock can use the struct path LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE SELINUX: Make selinux cache VFS RCU walks safe SECURITY: Move exec_permission RCU checks into security modules SELinux: security_read_policy should take a size_t not ssize_t ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o scripts/kallsyms.c: fix potential segfault scripts/gen_initramfs_list.sh: Convert to a /bin/sh script kbuild: Fix GNU make v3.80 compatibility kbuild: Fix passing -Wno-* options to gcc 4.4+ kbuild: move scripts/basic/docproc.c to scripts/docproc.c kbuild: Fix Makefile.asm-generic for um kbuild: Allow to combine multiple W= levels kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0 Fix handling of backlash character in LINUX_COMPILE_BY name kbuild: asm-generic support kbuild: implement several W= levels kbuild: Fix build with binutils <= 2.19 initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros kbuild: Use the deterministic mode of ar kbuild: Call gzip with -n kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile Kconfig: improve KALLSYMS_ALL documentation Fix up trivial conflict in Makefile
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: Make struct pcmcia_device_id const, sound drivers edition staging: pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Convert pcmcia_device_id declarations to const pcmcia: Make declaration and uses of struct pcmcia_device_id const pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits) drivers/gpu/drm/radeon/atom.c: fix warning drm/radeon/kms: bump kms version number drm/radeon/kms: properly set num banks for fusion asics drm/radeon/kms/atom: move dig phy init out of modesetting drm/radeon/kms/cayman: fix typo in register mask drm/radeon/kms: fix typo in spread spectrum code drm/radeon/kms: fix tile_config value reported to userspace on cayman. drm/radeon/kms: fix incorrect comparison in cayman setup code. drm/radeon/kms: add wait idle ioctl for eg->cayman drm/radeon/cayman: setup hdp to invalidate and flush when asked drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked agp/uninorth: Fix lockups with radeon KMS and >1x. drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices drm/radeon/kms: fixup eDP connector handling drm/radeon/kms: bail early for eDP in hotplug callback drm/radeon/kms: simplify hotplug handler logic drm/radeon/kms: rewrite DP handling drm/radeon/kms/atom: add support for setting DP panel mode drm/radeon/kms: atombios.h updates for DP panel mode ...
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits) [S390] cpu hotplug: fix external interrupt subclass mask handling [S390] oprofile: dont access lowcore [S390] oprofile: add missing irq stats counter [S390] Ignore sendmmsg system call note wired up warning [S390] s390,oprofile: fix compile error for !CONFIG_SMP [S390] s390,oprofile: fix alert counter increment [S390] Remove unused includes in process.c [S390] get CPC image name [S390] sclp: event buffer dissection [S390] chsc: process channel-path-availability information [S390] refactor page table functions for better pgste support [S390] merge page_test_dirty and page_clear_dirty [S390] qdio: prevent compile warning [S390] sclp: remove unnecessary sendmask check [S390] convert old cpumask API into new one [S390] pfault: cleanup code [S390] pfault: cpu hotplug vs missing completion interrupts [S390] smp: add __noreturn attribute to cpu_die() [S390] percpu: implement arch specific irqsafe_cpu_ops [S390] vdso: disable gcov profiling ...
-
由 Jean Delvare 提交于
* Fix white space. * Rename labels to something meaningful. * Prefix defines with PORT_ to avoid collision with macros from <linux/parport.h>. * Add const markers where possible. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-