提交 3086fd27 编写于 作者: M Mike Frysinger

Blackfin: bf51x/bf52x: fix typo in hysteresis MMR names

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
上级 c977819d
......@@ -903,10 +903,10 @@ void __init setup_arch(char **cmdline_p)
bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
#endif
#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15);
bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15);
bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15);
bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() &
bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15);
bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15);
bfin_write_PORTH_HYSTERESIS(HYST_PORTH_0_15);
bfin_write_MISCPORT_HYSTERESIS((bfin_read_MISCPORT_HYSTERESIS() &
~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
#endif
......
......@@ -990,18 +990,18 @@
#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val)
#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW)
#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val)
#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS)
#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val)
#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS)
#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val)
#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS)
#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val)
#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS)
#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val)
#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS)
#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val)
#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS)
#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val)
#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE)
#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val)
#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW)
#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val)
#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS)
#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val)
#define bfin_read_MISCPORT_HYSTERESIS() bfin_read16(MISCPORT_HYSTERESIS)
#define bfin_write_MISCPORT_HYSTERESIS(val) bfin_write16(MISCPORT_HYSTERESIS, val)
/* HOST Port Registers */
......
......@@ -561,12 +561,12 @@
#define PORTF_SLEW 0xFFC03230 /* Port F slew control */
#define PORTG_SLEW 0xFFC03234 /* Port G slew control */
#define PORTH_SLEW 0xFFC03238 /* Port H slew control */
#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */
#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */
#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */
#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */
#define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */
/***********************************************************************************
......
......@@ -1007,18 +1007,18 @@
#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val)
#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW)
#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val)
#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS)
#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val)
#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS)
#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val)
#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS)
#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val)
#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS)
#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val)
#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS)
#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val)
#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS)
#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val)
#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE)
#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val)
#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW)
#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val)
#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS)
#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val)
#define bfin_read_MISCPORT_HYSTERESIS() bfin_read16(MISCPORT_HYSTERESIS)
#define bfin_write_MISCPORT_HYSTERESIS(val) bfin_write16(MISCPORT_HYSTERESIS, val)
/* HOST Port Registers */
......
......@@ -562,12 +562,12 @@
#define PORTF_SLEW 0xFFC03230 /* Port F slew control */
#define PORTG_SLEW 0xFFC03234 /* Port G slew control */
#define PORTH_SLEW 0xFFC03238 /* Port H slew control */
#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */
#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */
#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */
#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */
#define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */
/***********************************************************************************
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册