nvram_compress() and zip_oops() is used by the nvram_pstore_write
API to compress oops messages hence re-organise the functions
accordingly to avoid forward declarations.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Header size is needed to distinguish between header and the dump data.
Incorporate the addition of new argument (hsize) in the pstore write
callback.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

So because those things always end up in trainwrecks... In 7846de40
we moved back the iommu initialization earlier, essentially undoing
37f02195 which was causing us endless trouble... except that in the
meantime we had merged 959c9bdd (to workaround the original breakage)
which is now ... broken :-)

This fixes it by doing a partial revert of the latter (we keep the
ppc_md. path which will be needed in the hotplug case, which happens
also during some EEH error recovery situations).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.10]

Merge 3.10 in order to get some of the last minute powerpc
changes, resolve conflicts and add additional fixes on top
of them.

On LPAR systems we need to inform the hypervisor that we are using the
EBB registers. We do this by setting a bit in the Virtual Processor Area
(VPA) - formerly known as the lppaca.

For now we do this always, ie. we do not dynamically enable/disable.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add logic to the power8 PMU code to support EBB. Future processors would
also be expected to implement similar constraints. At that time we could
possibly factor these out into common code.

Finally mark the power8 PMU as supporting EBB, which is the actual
enable switch which allows EBBs to be configured.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add support for EBB (Event Based Branches) on 64-bit book3s. See the
included documentation for more details.

EBBs are a feature which allows the hardware to branch directly to a
specified user space address when a PMU event overflows. This can be
used by programs for self-monitoring with no kernel involvement in the
inner loop.

Most of the logic is in the generic book3s code, primarily to avoid a
proliferation of PMU callbacks.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In commit 59affcd3 "Context switch more PMU related SPRs" I added more
PMU SPRs to thread_struct, later modified in commit b11ae951. To add
insult to injury it turns out we don't need to switch MMCRA as it's
only user readable, and the value is recomputed by the PMU code.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In power_pmu_enable() we still enable the PMU even if we have zero
events. This should have no effect but doesn't make much sense. Instead
just return after telling the hypervisor that we are not using the PMCs.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In power_pmu_enable() we can use the existing out label to reduce the
number of return paths.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On Power8 we can freeze PMC5 and 6 if we're not using them. Normally they
run all the time.

As noticed by Anshuman, we should unfreeze them when we disable the PMU
as there are legacy tools which expect them to run all the time.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In pmu_disable() we disable the PMU by setting the FC (Freeze Counters)
bit in MMCR0. In order to do this we have to read/modify/write MMCR0.

It's possible that we read a value from MMCR0 which has PMAO (PMU Alert
Occurred) set. When we write that value back it will cause an interrupt
to occur. We will then end up in the PMU interrupt handler even though
we are supposed to have just disabled the PMU.

We can avoid this by making sure we never write PMAO back. We should not
lose interrupts because when the PMU is re-enabled the overflowed values
will cause another interrupt.

We also reorder the clearing of SAMPLE_ENABLE so that is done after the
PMU is frozen. Otherwise there is a small window between the clearing of
SAMPLE_ENABLE and the setting of FC where we could take an interrupt and
incorrectly see SAMPLE_ENABLE not set. This would for example change the
logic in perf_read_regs().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A mistake we have made in the past is that we pull out the fields we
need from the event code, but don't check that there are no unknown bits
set. This means that we can't ever assign meaning to those unknown bits
in future.

Although we have once again failed to do this at release, it is still
early days for Power8 so I think we can still slip this in and get away
with it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Similar to the facility unavailble exception, except the facilities are
controlled by HFSCR.

Adapt the facility_unavailable_exception() so it can be called for
either the regular or Hypervisor facility unavailable exceptions.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The exception at 0xf60 is not the TM (Transactional Memory) unavailable
exception, it is the "Facility Unavailable Exception", rename it as
such.

Flesh out the handler to acknowledge the fact that it can be called for
many reasons, one of which is TM being unavailable.

Use STD_EXCEPTION_COMMON() for the exception body, for some reason we
had it open-coded, I've checked the generated code is identical.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

KVMTEST is a macro which checks whether we are taking an exception from
guest context, if so we branch out of line and eventually call into the
KVM code to handle the switch.

When running real guests on bare metal (HV KVM) the hardware ensures
that we never take a relocation on exception when transitioning from
guest to host. For PR KVM we disable relocation on exceptions ourself in
kvmppc_core_init_vm(), as of commit a413f474 "Disable relocation on
exceptions whenever PR KVM is active".

So convert all the RELON macros to use NOTEST, and drop the remaining
KVM_HANDLER() definitions we have for 0xe40 and 0xe80.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have relocation on exception handlers defined for h_data_storage and
h_instr_storage. However we will never take relocation on exceptions for
these because they can only come from a guest, and we never take
relocation on exceptions when we transition from guest to host.

We also have a handler for hmi_exception (Hypervisor Maintenance) which
is defined in the architecture to never be delivered with relocation on,
see see v2.07 Book III-S section 6.5.

So remove the handlers, leaving a branch to self just to be double extra
paranoid.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
CC: <stable@vger.kernel.org> [v3.9+]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The topology update code that updates the cpu node registration in sysfs
should not be called while in stop_machine(). The register/unregister
calls take a lock and may sleep.

This patch moves these calls outside of the call to stop_machine().
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Update MAINTAINERS to reflect recent changes.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

the smp_release_cpus is a normal funciton and called in normal environments,
  but it calls the __initdata spinning_secondaries.
  need modify spinning_secondaries to match smp_release_cpus.

the related warning:
  (the linker report boot_paca.33377, but it should be spinning_secondaries)

-----------------------------------------------------------------------------

WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377
The function .smp_release_cpus() references
the variable __initdata boot_paca.33377.
This is often because .smp_release_cpus lacks a __initdata
annotation or the annotation of boot_paca.33377 is wrong.

-----------------------------------------------------------------------------
Signed-off-by: NChen Gang <gang.chen@asianux.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When error occurs, need return the related error code to let upper
caller know about it.

ppc_md.nvram_size() can return the error code (e.g. core99_nvram_size()
in 'arch/powerpc/platforms/powermac/nvram.c').

Also set ret value when only need it, so can save structions for normal
cases.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

It seems following race is possible:

	cpu0					cpux
smp_init->cpu_up->_cpu_up
	__cpu_up
		kick_cpu(1)
-------------------------------------------------------------------------
		waiting online			...
		...				notify CPU_STARTING
							set cpux active
						set cpux online
-------------------------------------------------------------------------
		finish waiting online
		...
sched_init_smp
	init_sched_domains(cpu_active_mask)
		build_sched_domains
						set cpux sibling info
-------------------------------------------------------------------------

Execution of cpu0 and cpux could be concurrent between two separator
lines.

So if the cpux sibling information was set too late (normally
impossible, but could be triggered by adding some delay in
start_secondary, after setting cpu online), build_sched_domains()
running on cpu0 might see cpux active, with an empty sibling mask, then
cause some bad address accessing like following:

[    0.099855] Unable to handle kernel paging request for data at address 0xc00000038518078f
[    0.099868] Faulting instruction address: 0xc0000000000b7a64
[    0.099883] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.099895] PREEMPT SMP NR_CPUS=16 DEBUG_PAGEALLOC NUMA pSeries
[    0.099922] Modules linked in:
[    0.099940] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc1-00120-gb973425c-dirty #16
[    0.099956] task: c0000001fed80000 ti: c0000001fed7c000 task.ti: c0000001fed7c000
[    0.099971] NIP: c0000000000b7a64 LR: c0000000000b7a40 CTR: c0000000000b4934
[    0.099985] REGS: c0000001fed7f760 TRAP: 0300   Not tainted  (3.10.0-rc1-00120-gb973425c-dirty)
[    0.099997] MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 24272828  XER: 20000003
[    0.100045] SOFTE: 1
[    0.100053] CFAR: c000000000445ee8
[    0.100064] DAR: c00000038518078f, DSISR: 40000000
[    0.100073]
GPR00: 0000000000000080 c0000001fed7f9e0 c000000000c84d48 0000000000000010
GPR04: 0000000000000010 0000000000000000 c0000001fc55e090 0000000000000000
GPR08: ffffffffffffffff c000000000b80b30 c000000000c962d8 00000003845ffc5f
GPR12: 0000000000000000 c00000000f33d000 c00000000000b9e4 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000001 0000000000000000
GPR20: c000000000ccf750 0000000000000000 c000000000c94d48 c0000001fc504000
GPR24: c0000001fc504000 c0000001fecef848 c000000000c94d48 c000000000ccf000
GPR28: c0000001fc522090 0000000000000010 c0000001fecef848 c0000001fed7fae0
[    0.100293] NIP [c0000000000b7a64] .get_group+0x84/0xc4
[    0.100307] LR [c0000000000b7a40] .get_group+0x60/0xc4
[    0.100318] Call Trace:
[    0.100332] [c0000001fed7f9e0] [c0000000000dbce4] .lock_is_held+0xa8/0xd0 (unreliable)
[    0.100354] [c0000001fed7fa70] [c0000000000bf62c] .build_sched_domains+0x728/0xd14
[    0.100375] [c0000001fed7fbe0] [c000000000af67bc] .sched_init_smp+0x4fc/0x654
[    0.100394] [c0000001fed7fce0] [c000000000adce24] .kernel_init_freeable+0x17c/0x30c
[    0.100413] [c0000001fed7fdb0] [c00000000000ba08] .kernel_init+0x24/0x12c
[    0.100431] [c0000001fed7fe30] [c000000000009f74] .ret_from_kernel_thread+0x5c/0x68
[    0.100445] Instruction dump:
[    0.100456] 38800010 38a00000 4838e3f5 60000000 7c6307b4 2fbf0000 419e0040 3d220001
[    0.100496] 78601f24 39491590 e93e0008 7d6a002a <7d69582a> f97f0000 7d4a002a e93e0010
[    0.100559] ---[ end trace 31fd0ba7d8756001 ]---

This patch tries to move the sibling maps updating before
notify_cpu_starting() and cpu online, and a write barrier there to make
sure sibling maps are updated before active and online mask.
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

cuda_init_via() is called from find_via_cuda() only, which is __init.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the powerpc uses of the __cpuinit macros.  There
are no __CPUINIT users in assembly files in powerpc.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

pci_iommu_init() and pci_direct_iommu_init() are not referenced anywhere,
so remove them.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For an unknown relocation type since the value of r4 is just the 8bit
relocation type, the sum of r4 and r7 may yield an invalid memory
address. For example:
    In normal case:
             r4 = c00xxxxx
             r7 = 40000000
             r4 + r7 = 000xxxxx

    For an unknown relocation type:
             r4 = 000000xx
             r7 = 40000000
             r4 + r7 = 400000xx
   400000xx is an invalid memory address for a board which has just
   512M memory.

And for operations such as dcbst or icbi may cause bus error for an
invalid memory address on some platforms and then cause the board
reset. So we should skip the flush/invalidate the d/icache for
an unknown relocation type.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Acked-by: NSuzuki K. Poulose <suzuki@in.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With pm81/pm91/pm121, when the overtemperature state is entered, and
when it remains on after skipped ticks, the driver will try to leave
it too soon (immediately on the next tick). This is because the active
FAILURE_OVERTEMP state is not visible in "new_failure" variable of the
current tick. Furthermore, the driver will keep trying to clear condition
in subsequent ticks as FAILURE_OVERTEMP remains set in the "last_failure"
variable. These will start to trigger WARNINGS from windfarm core:

[  100.082735] windfarm: Clamping CPU frequency to minimum !
[  100.108132] windfarm: Overtemp condition detected !
[  101.952908] windfarm: Overtemp condition cleared !
[...]
[  102.980388] WARNING: at drivers/macintosh/windfarm_core.c:463
[...]
[  103.982227] WARNING: at drivers/macintosh/windfarm_core.c:463
[...]
[  105.030494] WARNING: at drivers/macintosh/windfarm_core.c:463
[...]
[  105.973666] WARNING: at drivers/macintosh/windfarm_core.c:463
[...]
[  106.977913] WARNING: at drivers/macintosh/windfarm_core.c:463

Fix by adding a helper global variable. We leave the overtemp state only
after all failure bits have been cleared.

I saw this error on iMac G5 iSight (pm121). Also pm81/pm91 are fixed
based on the observation that these are almost identical/copy-pasted code.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently, we're using the combo (PCI bus + devfn) in the PCI
config accessors and PCI config accessors in EEH depends on them.
However, it's not safe to refer the PCI bus which might have been
removed during hotplug. So we're using device node in the PCI
config accessors and the corresponding backends just reuse them.

The patch also fix one potential risk: We possiblly have frozen
PE during the early PCI probe time, but we haven't setup the PE
mapping yet. So the errors should be counted to PE#0.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch is for avoiding following build warnings:

   The function .pnv_pci_ioda_fixup() references
   the function __init .eeh_init().
   This is often because .pnv_pci_ioda_fixup lacks a __init

   The function .pnv_pci_ioda_fixup() references
   the function __init .eeh_addr_cache_build().
   This is often because .pnv_pci_ioda_fixup lacks a __init
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We needn't the the whole backtrace other than one-line message in
the error reporting interrupt handler. For errors triggered by
access PCI config space or MMIO, we replace "WARN(1, ...)" with
pr_err() and dump_stack(). The patch also adds more output messages
to indicate what EEH core is doing. Besides, some printk() are
replaced with pr_warning().
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On the PowerNV platform, the EEH address cache isn't built correctly
because we skipped the EEH devices without binding PE. The patch
fixes that.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have 2 fields in "struct pnv_phb" to trace the states. The patch
replace the fields with one and introduces flags for that. The patch
doesn't impact the logic.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

After reset (e.g. complete reset) in order to bring the fenced PHB
back, the PCIe link might not be ready yet. The patch intends to
make sure the PCIe link is ready before accessing its subordinate
PCI devices. The patch also fixes that wrong values restored to
PCI_COMMAND register for PCI bridges.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When the PHB is fenced or dead, it's pointless to collect the data
from PCI config space of subordinate PCI devices since it should
return 0xFF's. The patch also fixes overwritten buffer while getting
PCI config data.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Pull another powerpc fix from Benjamin Herrenschmidt:
 "I mentioned that while we had fixed the kernel crashes, EEH error
  recovery didn't always recover...  It appears that I had a fix for
  that already in powerpc-next (with a stable CC).

  I cherry-picked it today and did a few tests and it seems that things
  now work quite well.  The patch is also pretty simple, so I see no
  reason to wait before merging it."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix fetching bus for single-dev-PE

Pull SCSI fixes from James Bottomley:
 "This is a set of seven bug fixes.  Several fcoe fixes for locking
  problems, initiator issues and a VLAN API change, all of which could
  eventually lead to data corruption, one fix for a qla2xxx locking
  problem which could lead to multiple completions of the same request
  (and subsequent data corruption) and a use after free in the ipr
  driver.  Plus one minor MAINTAINERS file update"

(only six bugfixes in this pull, since I had already pulled the fcoe API
fix directly from Robert Love)

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] ipr: Avoid target_destroy accessing memory after it was freed
  [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
  MAINTAINERS: Fix fcoe mailing list
  libfc: extend ex_lock to protect all of fc_seq_send
  libfc: Correct check for initiator role
  libfcoe: Fix Conflicting FCFs issue in the fabric