powerpc/pci: Improve device hotplug initialization

Commit 37f02195 (powerpc/pci: fix PCI-e devices rescan issue on powerpc
platform) fixes a problem with interrupt and DMA initialization on hot
plugged devices. With this commit, interrupt and DMA initialization for
hot plugged devices is handled in the pci device enable function.

This approach has a couple of drawbacks. First, it creates two code paths
for device initialization, one for hot plugged devices and another for devices
known during the initial PCI scan. Second, the initialization code for hot
plugged devices is only called when the device is enabled, ie typically
in the probe function. Also, the platform specific setup code is called each
time pci_enable_device() is called, not only once during device discovery,
meaning it is actually called multiple times, once for devices discovered
during the initial scan and again each time a driver is re-loaded.

The visible result is that interrupt pins are only assigned to hot plugged
devices when the device driver is loaded. Effectively this changes the PCI
probe API, since pci_dev->irq and the device's dma configuration will now
only be valid after pci_enable() was called at least once. A more subtle
change is that platform specific PCI device setup is moved from device
discovery into the driver's probe function, more specifically into the
pci_enable_device() call.

To fix the inconsistencies, add new function pcibios_add_device.
Call pcibios_setup_device from pcibios_setup_bus_devices if device setup
is not complete, and from pcibios_add_device if bus setup is complete.

With this change, device setup code is moved back into device initialization,
and called exactly once for both static and hot plugged devices.

[ This also fixes a regression introduced by the above patch which
  causes dev->irq to be overwritten under some cirumstances after
  MSIs have been enabled for the device which leads to crashes due
  to the MSI core "hijacking" dev->irq to store the base MSI number
  and not the LSI. --BenH
]

Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/kernel/pci-common.c

@@ -994,7 +994,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus)
 		ppc_md.pci_dma_bus_setup(bus);
 }
 
-void pcibios_setup_device(struct pci_dev *dev)
+static void pcibios_setup_device(struct pci_dev *dev)
 {
 	/* Fixup NUMA node as it may not be setup yet by the generic
 	 * code and is needed by the DMA init
@@ -1015,6 +1015,17 @@ void pcibios_setup_device(struct pci_dev *dev)
 		ppc_md.pci_irq_fixup(dev);
 }
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	/*
+	 * We can only call pcibios_setup_device() after bus setup is complete,
+	 * since some of the platform specific DMA setup code depends on it.
+	 */
+	if (dev->bus->is_added)
+		pcibios_setup_device(dev);
+	return 0;
+}
+
 void pcibios_setup_bus_devices(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -1469,10 +1480,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 		if (ppc_md.pcibios_enable_device_hook(dev))
 			return -EINVAL;
 
-	/* avoid pcie irq fix up impact on cardbus */
-	if (dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
-		pcibios_setup_device(dev);
-
 	return pci_enable_resources(dev, mask);
 }