Pull ATA fixes from Damien Le Moal:
 "Several small fixes for rc2:

   - Remove unused field in struct ata_port (Hannes)

   - Fix a potential (very unlikely) NULL pointer dereference in
     ata_host_alloc_pinfo() (Sergey)

   - Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)

   - Fixes for handling access to the concurrent positioning ranges log
     page used with multi-actuator HDDs (Tyler)

   - Fix the values shown by the pio_mode and dma_mode sysfs device
     attributes (Sergey)

   - Update the MAINTAINERS file to add libata sysfs ABI documentation
     file (Sergey)"

* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  MAINTAINERS: add ATA sysfs file documentation to libata entry
  ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
  libata: fix translation of concurrent positioning ranges
  libata: fix reading concurrent positioning ranges log
  ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
  ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
  ata: libata: drop 'sas_last_tag'

Pull sound fixes from Takashi Iwai:
 "A collection of fixes; almost all changes are device-specific small
  fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
  so far"

* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: hda/realtek: Add quirk for HP Dev One
  ALSA: hda/realtek - Add HW8326 support
  ALSA: hda/conexant - Fix loopback issue with CX20632
  ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
  ALSA: usb-audio: Set up (implicit) sync for Saffire 6
  ALSA: usb-audio: Skip generic sync EP parse for secondary EP
  ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
  ASoC: es8328: Fix event generation for deemphasis control
  ASoC: wm8962: Fix suspend while playing music
  ASoC: SOF: ipc-msg-injector: Fix reversed if statement
  ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
  ASoC: fsl_sai: Add support for i.MX8MN
  ASoC: SOF: Fix potential NULL pointer dereference
  ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
  ASoC: cs42l51: Correct minimum value for SX volume control
  ASoC: cs42l56: Correct typo in minimum level for SX volume controls
  ASoC: cs42l52: Correct TLV for Bypass Volume
  ASoC: cs53l30: Correct number of volume levels on SX controls
  ASoC: cs35l36: Update digital volume TLV
  ASoC: cs42l52: Fix TLV scales for mixer controls
  ...

Pull drm fixes from Dave Airlie:
 "Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
  then some misc panfrost, bridge/panel ones, and one ast fix for
  multi-monitors. Probably pick up a bit more next week like rc3 often
  does.

  amdgpu:
   - DCN 3.1 golden settings fix
   - eDP fixes
   - DMCUB fixes
   - GFX11 fixes and cleanups
   - VCN fix for yellow carp
   - GMC11 fixes
   - RAS fixes
   - GPUVM TLB flush fixes
   - SMU13 fixes
   - VCN3 AV1 regression fix
   - VCN2 JPEG fix
   - Other misc fixes

  amdkfd:
   - MMU notifier fix
   - Support for more GC 10.3.x families
   - Pinned BO handling fix
   - Partial migration bug fix

  panfrost:
   - fix a use after free

  ti-sn65dsi83:
   - fix invalid DT configuration

  panel:
   - two self refresh fixes

  ast:
   - multiple output fix"

* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
  drm/ast: Support multiple outputs
  drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
  drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
  drm/amdgpu: always flush the TLB on gfx8
  drm/amdgpu: fix limiting AV1 to the first instance on VCN3
  drm/amdkfd:Fix fw version for 10.3.6
  drm/amdgpu: Add MODE register to wave debug info in gfx11
  Revert "drm/amd/display: Pass the new context into disable OTG WA"
  Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
  drm/atomic: Force bridge self-refresh-exit on CRTC switch
  drm/bridge: analogix_dp: Support PSR-exit to disable transition
  drm/amdgpu: suppress the compile warning about 64 bit type
  drm/amd/pm: suppress compile warnings about possible unaligned accesses
  drm/amdkfd: Fix partial migration bugs
  drm/amdkfd: add pinned BOs to kfd_bo_list
  drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
  drm/amdgpu: enable tmz by default for GC 10.3.7
  drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
  drm/amdkfd: Use mmget_not_zero in MMU notifier
  drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
  ...

Pull networking fixes from Jakub Kicinski:
 "Quick follow up, to cleanly fast-forward net again.

  Current release - new code bugs:

   - Revert "net/mlx5e: Allow relaxed ordering over VFs"

  Previous releases - regressions:

   - seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
     flowi_l3mdev

  Misc:

   - rename TLS_INFO_ZC_SENDFILE to better express the meaning"

* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
  net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
  nfp: flower: restructure flow-key for gre+vlan combination
  nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
  tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
  net/mlx5: fs, fail conflicting actions
  net/mlx5: Rearm the FW tracer after each tracer event
  net/mlx5: E-Switch, pair only capable devices
  net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
  Revert "net/mlx5e: Allow relaxed ordering over VFs"
  MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal

Pull xen updates from Juergen Gross:

 - a small cleanup removing "export" of an __init function

 - a small series adding a new infrastructure for platform flags

 - a series adding generic virtio support for Xen guests (frontend side)

* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
  arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
  xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
  xen/grant-dma-iommu: Introduce stub IOMMU driver
  dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
  xen/virtio: Enable restricted memory access using Xen grant mappings
  xen/grant-dma-ops: Add option to restrict memory access under Xen
  xen/grants: support allocating consecutive grants
  arm/xen: Introduce xen_setup_dma_ops()
  virtio: replace arch_has_restricted_virtio_memory_access()
  kernel: add platform_has() infrastructure

Pull MIPS fix from Thomas Bogendoerfer:
 "Build fix for Loongson-3"

* tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.

Saeed Mahameed says:

====================
mlx5 fixes 2022-06-08

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: fs, fail conflicting actions
  net/mlx5: Rearm the FW tracer after each tracer event
  net/mlx5: E-Switch, pair only capable devices
  net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
  Revert "net/mlx5e: Allow relaxed ordering over VFs"
  MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================

Link: https://lore.kernel.org/r/20220608185855.19818-1-saeed@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Commit 40867d74 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).

The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().

However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.

This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.

The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.

[1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
[2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh

Fixes: 40867d74 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: NAnton Makarov <am@3a-alliance.com>
Signed-off-by: NAndrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.itSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
nfp: fixes for v5.19

this short series includes two fixes for the NFP driver.

1. Restructure GRE+VLAN flower offload to address a miss match
   between the NIC firmware and driver implementation which
   prevented these features from working in combination.

2. Prevent unnecessary warnings regarding rate limiting support.-
   It is expected that this feature to not _always_ be present
   but this was not taken into account when the code to check
   for this feature was added.
====================

Link: https://lore.kernel.org/r/20220608092901.124780-1-simon.horman@corigine.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.

Fixes: 0d630f58 ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b9304 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: NEtienne van der Linde <etienne.vanderlinde@corigine.com>
Signed-off-by: NLouis Peens <louis.peens@corigine.com>
Signed-off-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@corigine.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.

However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.

Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.

Fixes: e0d0e1fd ("nfp: VF rate limit support")
Fixes: 59359597 ("nfp: support 802.1ad VLAN assingment to VF")
Signed-off-by: NFei Qin <fei.qin@corigine.com>
Signed-off-by: NYinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: NLouis Peens <louis.peens@corigine.com>
Signed-off-by: NSimon Horman <simon.horman@corigine.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:

* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX

RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.

Fixes: c1318b39 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

two fixes for panel self-refresh handling, and one to fix
multiple output support on AST.
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609100754.kvrkjy67gqabjuee@houat

A use-after-free fix for panfrost, and a DT invalid configuration fix for
ti-sn65dsi83
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526090532.nvhlmwev5qgln3nb@houat

While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled.  This was causing the
following complaint[1] from gcc v12:

  In file included from include/linux/string.h:253,
                   from include/linux/ceph/ceph_debug.h:7,
                   from fs/ceph/inode.c:2:
  In function 'fortify_memset_chk',
      inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
      inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
  include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
    242 |                         __write_overflow_field(p_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode).  The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.

Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).

Most of the changes were done with:

  perl -p -i -e 's/vfs_inode/netfs.inode/'g \
        `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`

Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.

Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].

Version #2:
 - Fix a couple of missed name changes due to a disabled cifs option.
 - Rename nfs_i_context to nfs_inode
 - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
   structs.

[ This also undoes commit 507160f4 ("netfs: gcc-12: temporarily
  disable '-Wattribute-warning' for now") that is no longer needed ]

Fixes: bc899ee1 ("netfs: Add a netfs inode context")
Reported-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NXiubo Li <xiubli@redhat.com>
cc: Jonathan Corbet <corbet@lwn.net>
cc: Eric Van Hensbergen <ericvh@gmail.com>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: William Kucharski <william.kucharski@oracle.com>
cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
cc: Dave Chinner <david@fromorbit.com>
cc: linux-doc@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1]
Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3]
Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
  undefined error,fix cpu_hwmon compile options to be bool.Some kernel
  compilation error information is as follows:

  Checking missing-syscalls for N32
  CALL    scripts/checksyscalls.sh
  Checking missing-syscalls for O32
  CALL    scripts/checksyscalls.sh
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CC [M]  drivers/platform/mips/cpu_hwmon.o
  Building modules, stage 2.
  MODPOST 200 modules
ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined!
ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1
make: *** [Makefile:1261：modules] 错误 2
Signed-off-by: NYupeng Li <liyupeng@zbhlos.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NHuacai Chen <chenhuacai@kernel.org>
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>

Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
 "A fix for race in writeback code and two cleanups in quota and ext2"

* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Prevent memory allocation recursion while holding dq_lock
  writeback: Fix inode->i_io_list not be protected by inode->i_lock error
  fs: Fix syntax errors in comments

Pull powerpc fixes from Michael Ellerman:

 - On 32-bit fix overread/overwrite of thread_struct via ptrace
   PEEK/POKE.

 - Fix softirqs not switching to the softirq stack since we moved
   irq_exit().

 - Force thread size increase when KASAN is enabled to avoid stack
   overflows.

 - On Book3s 64 mark more code as not to be instrumented by KASAN to
   avoid crashes.

 - Exempt __get_wchan() from KASAN checking, as it's inherently racy.

 - Fix a recently introduced crash in the papr_scm driver in some
   configurations.

 - Remove include of <generated/compile.h> which is forbidden.

Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.

* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Fix overread/overwrite of thread_struct via ptrace
  powerpc/book3e: get rid of #include <generated/compile.h>
  powerpc/kasan: Force thread size increase with KASAN
  powerpc/papr_scm: don't requests stats with '0' sized stats buffer
  powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
  powerpc/kasan: Silence KASAN warnings in __get_wchan()
  powerpc/kasan: Mark more real-mode code as not to be instrumented

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - eth: amt: fix possible null-ptr-deref in amt_rcv()

  Previous releases - regressions:

   - tcp: use alloc_large_system_hash() to allocate table_perturb

   - af_unix: fix a data-race in unix_dgram_peer_wake_me()

   - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

   - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF

  Previous releases - always broken:

   - ipv6: fix signed integer overflow in __ip6_append_data

   - netfilter:
       - nat: really support inet nat without l3 address
       - nf_tables: memleak flow rule from commit path

   - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs

   - openvswitch: fix misuse of the cached connection on tuple changes

   - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred

   - eth: altera: fix refcount leak in altera_tse_mdio_create

  Misc:

   - add Quentin Monnet to bpftool maintainers"

* tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  net: amd-xgbe: fix clang -Wformat warning
  tcp: use alloc_large_system_hash() to allocate table_perturb
  net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY
  net: dsa: mv88e6xxx: correctly report serdes link failure
  net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
  net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
  net: altera: Fix refcount leak in altera_tse_mdio_create
  net: openvswitch: fix misuse of the cached connection on tuple changes
  net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
  ip_gre: test csum_start instead of transport header
  au1000_eth: stop using virt_to_bus()
  ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
  ipv6: Fix signed integer overflow in __ip6_append_data
  nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
  nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
  nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
  nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
  net: ipv6: unexport __init-annotated seg6_hmac_init()
  net: xfrm: unexport __init-annotated xfrm4_protocol_init()
  net: mdio: unexport __init-annotated mdio_bus_init()
  ...

This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.

In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:

  In function ‘fortify_memset_chk’,
      inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
      inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
      inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
  include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
    258 |                         __write_overflow_field(p_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does

        struct netfs_i_context *ctx = netfs_i_context(inode);

        memset(ctx, 0, sizeof(*ctx));

where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.

This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.

See for example fs/cifs/cifsglob.h:

  struct cifsInodeInfo {
        struct {
                /* These must be contiguous */
                struct inode    vfs_inode;      /* the VFS's inode record */
                struct netfs_i_context netfs_ctx; /* Netfslib context */
        };
	[...]

and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).

Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".

This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade.  And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.

Including with these kinds of temporary fixes.

Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/all/AEEBCF5D-8402-441D-940B-105AA718C71F@chromium.org/Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit 8b202ee2 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.

It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.

Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:

        select GCC12_NO_ARRAY_BOUNDS

and we could do that for other configuration cases that cause issues.

Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:

  KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds)

but this ends up just doing it globally in the top-level Makefile, since
the current issues are spread fairly widely all over:

  KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds

We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.

Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc-12 started warning about 'tracker' being used uninitialized:

  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
    786 |         struct lag_tracker tracker;
        |                            ^~~~~~~

which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.

But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.

This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While the concept of checking for dangling pointers to local variables
at function exit is really interesting, the gcc-12 implementation is not
compatible with reality, and results in false positives.

For example, gcc sees us putting things on a local list head allocated
on the stack, which involves exactly those kinds of pointers to the
local stack entry:

  In function ‘__list_add’,
      inlined from ‘list_add_tail’ at include/linux/list.h:102:2,
      inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2:
  include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=]
     74 |         new->prev = prev;
        |         ~~~~~~~~~~^~~~~~

But then gcc - understandably - doesn't really understand the big
picture how the doubly linked list works, so doesn't see how we then end
up emptying said list head in a loop and the pointer we added has been
removed.

Gcc also complains about us (intentionally) using this as a way to store
a kind of fake stack trace, eg

  drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=]
     40 |         acpi_gbl_entry_stack_pointer = &current_sp;
        |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~

which is entirely reasonable from a compiler standpoint, and we may want
to change those kinds of patterns, but not not.

So this is one of those "it would be lovely if the compiler were to
complain about us leaving dangling pointers to the stack", but not this
way.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:

  drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
  drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
     72 |                 if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
        |                     ^

due to the extraneous '&' address-of operator.

Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.

Fixes: eb8c8880 ("drm/imx: add deferred plane disabling")
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec051 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: NAriel Miculas <ariel.miculas@belden.com>
Tested-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au

Systems with AST graphics can have multiple output; typically VGA
plus some other port. Record detected output chips in a bitmask and
initialize each output on its own.

Assume a VGA output by default and use SIL164 and DP501 if available.
For ASTDP assume that it can run in parallel with VGA.

Tested on AST2100.

v3:
	* define a macro for each BIT(ast_tx_chip) (Patrik)
v2:
	* make VGA/SIL164/DP501 mutually exclusive
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Fixes: a59b0264 ("drm/ast: Initialize encoder and connector for VGA in helper function")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
(cherry picked from commit 7f35680a)
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>

Merge tag 'amd-drm-fixes-5.19-2022-06-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.19-2022-06-08:

amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes

amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220608203008.6187-1-alexander.deucher@amd.com

see warning:
| drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies
| type 'unsigned short' but the argument has type 'int' [-Wformat]
|        netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto));
|                                      ~~~~~~     ^~~~~~~~~~~~~~~~~~~

Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends
using the promoted-to-type's format flag.

Also, as per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`

Since the argument is a u16 it will get promoted to an int and thus it is
most accurate to use the %x format specifier here. It should be noted that the
`#06` formatting sugar does not alter the promotion rules.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: NJustin Stitt <jstitt007@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220607191119.20686-1-jstitt007@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In our server, there may be no high order (>= 6) memory since we reserve
lots of HugeTLB pages when booting.  Then the system panic.  So use
alloc_large_system_hash() to allocate table_perturb.

Fixes: e9261476 ("tcp: dynamically allocate the perturb table used by source ports")
Signed-off-by: NMuchun Song <songmuchun@bytedance.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Since commit a18e6521 ("net: phylink: handle NA interface mode in
phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode
or phy-connection-type property is specified in a DSA port node of the
device tree. The same commit caused a regression in rtl8365mb whereby
phylink would fail to connect, because the driver did not advertise
support for GMII for ports with internal PHY.

It should be noted that the aforementioned regression is not because the
blamed commit was incorrect: on the contrary, the blamed commit is
correcting the previous behaviour whereby unspecified phy-mode would
cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The
rtl8365mb driver only worked by accident before because it _did_
advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved
for internal use by phylink. With one mistake fixed, the other was
exposed.

Commit a5dba0f2 ("net: dsa: rtl8365mb: add GMII as user port mode")
then introduced implicit support for GMII mode on ports with internal
PHY to allow a PHY connection for device trees where the phy-mode is not
explicitly set to "internal". At this point everything was working OK
again.

Subsequently, commit 6ff60646 ("net: dsa: realtek: convert to
phylink_generic_validate()") broke this behaviour again by discarding
the usage of rtl8365mb_phy_mode_supported() - where this GMII support
was indicated - while switching to the new .phylink_get_caps API.

With the new API, rtl8365mb_phy_mode_supported() is no longer needed.
Remove it altogether and add back the GMII capability - this time to
rtl8365mb_phylink_get_caps() - so that the above default behaviour works
for ports with internal PHY again.

Fixes: 6ff60646 ("net: dsa: realtek: convert to phylink_generic_validate()")
Signed-off-by: NAlvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220607184624.417641-1-alvin@pqrs.dkSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-07

This series contains updates to ixgbe driver only.

Olivier Matz resolves an issue so that broadcast packets can still be
received when VF removes promiscuous settings and removes setting of
VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are
bridged.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ixgbe: fix unexpected VLAN Rx in promisc mode on VF
  ixgbe: fix bcast packets Rx on VF after promisc removal
====================

Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Russell King says:

====================
mv88e6xxx: fixes for reading serdes state

These are some low-priority fixes to the mv88e6xxx serdes code.
Patch 1 fixes the reporting of an_complete, which is used in the
emulation of a conventional C22 PHY. Patch from Marek.

Patch 2 makes one of the error messages in patch 2 to be consistent
with the other error messages in this function.

Patch 3 ensures that we do not miss a link-failure event.
====================

Link: https://lore.kernel.org/r/Yp82TyoLon9jz6k3@shell.armlinux.org.ukSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Phylink wants to know if the link has dropped since the last time state
was retrieved, and the BMSR gives us that. Read the BMSR and use it when
deciding the link state. Fill in the an_complete member as well for the
emulated PHY state.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Other errors accessing the registers in mv88e6352_serdes_pcs_get_state()
print "PHY " before the register name, except for the BMSR. Make this
consistent with the other error messages.
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN
is bypassed") added the ability to link if AN was bypassed, and added
filling of state->an_complete field, but set it to true if AN was
enabled in BMCR, not when AN was reported complete in BMSR.

This was done because for some reason, when I wanted to use BMSR value
to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was
always 1), instead of BMSR_ANEGCOMPLETE bit.

Use BMSR_ANEGCOMPLETE for filling state->an_complete.

Fixes: ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed")
Signed-off-by: NMarek Behún <kabel@kernel.org>
Signed-off-by: NRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If packet headers changed, the cached nfct is no longer relevant
for the packet and attempt to re-use it leads to the incorrect packet
classification.

This issue is causing broken connectivity in OpenStack deployments
with OVS/OVN due to hairpin traffic being unexpectedly dropped.

The setup has datapath flows with several conntrack actions and tuple
changes between them:

  actions:ct(commit,zone=8,mark=0/0x1,nat(src)),
          set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)),
          set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)),
          ct(zone=8),recirc(0x4)

After the first ct() action the packet headers are almost fully
re-written.  The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.

Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.

The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.

Cc: stable@vger.kernel.org
Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Reported-by: NFrode Nordahl <frode.nordahl@canonical.com>
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html
Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856Signed-off-by: NIlya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
Signed-off-by: NChen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.

ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was

	if (csum && skb_checksum_start(skb) < skb->data)
		return -EINVAL;

This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward

	if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
	    skb_checksum_start(skb) < skb->data)
		return -EINVAL;

But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
  uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
  in skb_partial_csum_set in the normal header_ops datapath.

Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.

Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250 ("ip_gre: validate csum_start only on pull")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2022-06-09

We've added 6 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 49 insertions(+), 15 deletions(-).

The main changes are:

1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64
   BPF JIT compiler, from Eric Dumazet.

2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using
   the correct program context type, from Toke Høiland-Jørgensen.

3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski.

4) Fix potential integer overflows in multi-kprobe link code by using safer
   kvmalloc_array() allocation helpers, from Dan Carpenter.

5) Add Quentin as bpftool maintainer, from Quentin Monnet.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  MAINTAINERS: Add a maintainer for bpftool
  xsk: Fix handling of invalid descriptors in XSK TX batching API
  selftests/bpf: Add selftest for calling global functions from freplace
  bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs
  bpf: Use safer kvmalloc_array() where possible
  bpf, arm64: Clear prog->jited_len along prog->jited
====================

Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.netSigned-off-by: NJakub Kicinski <kuba@kernel.org>