It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The below patch fixes a typo found while reading through staging/slicoss
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes some typos that was found while reading through staging/serqt_usb2
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace pr_* calls with dev_* ones when the device structure is available.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add include files with function definitions to avoid sparse warnings.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace meaninful printks with pr_debug and remove useless ones.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

XGIFAIL() prints a message and returns a value, but it's used only in one
place. Better remove it and replace the call with the macro content.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Define real content of dumpVGAReg() only in debug mode. Remove old condition.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove DEBUGPRN() macro which is defined as empty.
Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMiguel Gómez <magomez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'io_bits' variable in the comedi_subdevice struct is a bitmask of
the input/output configuration of the the subdevice. It should be an
unsigned int to correctly represent this.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess: <fmhess@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core does the sanity check to make sure that the data length
the INSN_BITS instruction is 2. There is no need for the drivers to do
this check. Remove all the sanity checks in the drivers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the usbduxsigma driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.

Move the release of the driver's static 'start_stop_sem' semaphore in
usbduxsigma_attach() to occur a bit later for convenience, otherwise the
new usbduxsigma_attach_common() would need to be split in two.  I don't
think the slight delay in releasing the semaphore matters too much; it's
only used in the USB probe and disconnect functions and when attaching
and detaching comedi devices.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the vmv80xx driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the usbduxfast driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A previous set of patches by Ravishankar Karkala Mallikarjunayya
replaced a load of printk() calls with dev_info(), dev_err(), etc.
Unfortunately, these used the 'struct device *hw_dev' member of 'struct
comedi_device') as the first parameter of these dev_...() calls, but
that pointer is usually NULL, so the kernel log messages come out a bit
wrong (they contain the phrase "(NULL device *)").

Use the 'struct device *class_dev' member of 'struct comedi_device'
instead for these dev_...() calls.  It will be non-NULL and somewhat
meaningful to users.  It's also consistent with those comedi drivers
that already use the class_dev member in their dev_...() calls.

Some of the messages included the format "comedi%d" with the minor
device number used for the "%d".  This is now redundant as it will be
the same as the dev_name() part of the kernel log message produced by
the dev_...() calls.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A local static variable was declared as a pointer to a string
constant.  We're assigning to the underlying memory, so it
needs to be an array instead.
Signed-off-by: NChristopher Brannon <chris@the-brannons.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The depends on PCCARD is redundant. All of the comedi PCMCIA
drivers depend on PCMCIA which can only be enabled if PCCARD
is enabled. Remove the extra depends check.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Tested-by: NIan Abbott <abbotti@mev.co.uk>
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.

Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

typos in comments, fix ring_sw module description
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

IIO_ALTVOLTAGE is used by frequency/adf4350 and frequency/ad9523
Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of these drivers ever schedule any work, so there is no need to flush any
scheduled work when the driver is removed.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ADIS163xx variants use a different register address for the auxiliary ADC
channel than the ADIS16400. This patch fixes them to use the correct address.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The channel spec for ADUS16334's temperature channel uses the address and scan
index for the Z-axis acceleration channel. This patch fixes it to use the
temperature channel address and scan index instead.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ADIS16300 uses the same address for the temperature register as the
ADIS16350 and not the same as the ADIS16400.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the current driver ROLL_OUT register address is the same as the PITCH_OUT
register address. This patch fixes it to use the correct address.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the following sparse warning:

In function 'adis16080_read_raw':
warning: 'ut' may be used uninitialized in this function
Signed-off-by: NLeed Aguilar <leed.aguilar@ti.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The PDEBUG macro is used to output a bunch of debug messages in the
driver. These messages might be useful when first creating the driver
but they shouldn't be in mainline. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ISR_PDEBUG macro is used to output trace messages in the isr
routine. This shouldn't be in a mainline driver. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the PORT_PDEBUG macro remove we can now remove the inline
port io wrappers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The PORT_PDEBUG macro is used to output the result of every port
io operation. This shouldn't be in a mainline driver. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The CALL_PDEBUG macro is used to do function tracing in the driver.
There are better ways to do this. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>