stable inclusion
from stable-5.10.38
commit 79abde761e05ea1cb5996d458c0d31f0d80813f1
bugzilla: 51875
CVE: NA

--------------------------------

commit 8aec21c0 upstream.

Clear KVM's RDPID capability if the ENABLE_RDTSCP secondary exec control is
unsupported.  Despite being enumerated in a separate CPUID flag, RDPID is
bundled under the same VMCS control as RDTSCP and will #UD in VMX non-root
if ENABLE_RDTSCP is not enabled.

Fixes: 41cd02c6 ("kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-2-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NReiji Watanabe <reijiw@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit c8bf64e3fb77cc19bad146fbe26651985b117194
bugzilla: 51875
CVE: NA

--------------------------------

commit f5c7e842 upstream.

When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.

Commit f2c7ef3b ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.

As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state().

Fixes: f2c7ef3b ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit")
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210503150854.1144255-2-vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 2f86dd3d2bcfda3e14e8ee734e970dc05287d5fc
bugzilla: 51875
CVE: NA

--------------------------------

commit 2183de41 upstream.

Add a dedicated intercept enum for RDPID instead of piggybacking RDTSCP.
Unlike VMX's ENABLE_RDTSCP, RDPID is not bound to SVM's RDTSCP intercept.

Fixes: fb6d4d34 ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-5-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit abbf8c99a9e12182c350e93cb808de4599a2f701
bugzilla: 51875
CVE: NA

--------------------------------

commit 85d00112 upstream.

Do not advertise emulation support for RDPID if RDTSCP is unsupported.
RDPID emulation subtly relies on MSR_TSC_AUX to exist in hardware, as
both vmx_get_msr() and svm_get_msr() will return an error if the MSR is
unsupported, i.e. ctxt->ops->get_msr() will fail and the emulator will
inject a #UD.

Note, RDPID emulation also relies on RDTSCP being enabled in the guest,
but this is a KVM bug and will eventually be fixed.

Fixes: fb6d4d34 ("KVM: x86: emulate RDPID")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210504171734.1434054-3-seanjc@google.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NReiji Watanabe <reijiw@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 8a7027f011c5127d2c6e756425a831445f763f0c
bugzilla: 51875
CVE: NA

--------------------------------

commit 970655aa upstream.

Commit d3eeb1d7 ("xen/gntdev: use mmu_interval_notifier_insert")
introduced an error in gntdev_mmap(): in case the call of
mmu_interval_notifier_insert_locked() fails the exit path should not
call mmu_interval_notifier_remove(), as this might result in NULL
dereferences.

One reason for failure is e.g. a signal pending for the running
process.

Fixes: d3eeb1d7 ("xen/gntdev: use mmu_interval_notifier_insert")
Cc: stable@vger.kernel.org
Reported-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NLuca Fancellu <luca.fancellu@arm.com>
Link: https://lore.kernel.org/r/20210423054038.26696-1-jgross@suse.comSigned-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 652c9689f58900bcae9585f3c38d6596700898f0
bugzilla: 51875
CVE: NA

--------------------------------

commit 18abf874 upstream.

We have a cycle of callbacks scheduling works which submit
URBs with those callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210426092622.20433-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 12d16c24f35f98f9dc083035a9a6d8dcf59fe198
bugzilla: 51875
CVE: NA

--------------------------------

commit af0e1871 upstream.

The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.

Fixes clang scan-build warning:

drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]

Fixes: ac4f6eee ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit e8c6852bdba2995a9ed278e793a50159f53fa879
bugzilla: 51875
CVE: NA

--------------------------------

commit f73c7307 upstream.

The raw temperature value is a 16-bit signed integer. The sign casting
is missing in the code, which results in a wrong temperature reported
by userspace tools, fix it.

Cc: stable@vger.kernel.org
Fixes: 3904b28e ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201
Reported-by: NSvyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: NAndy Shevchenko <Andy.Shevchenko@gmail.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210423020959.5023-1-digetx@gmail.comSigned-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 70698dda4bcab9ff1b8df0c657130ef2894f25b1
bugzilla: 51875
CVE: NA

--------------------------------

commit 3c128781 upstream.

One of AMD xhci controller require reset on resume.
Occasionally AMD xhci controller does not respond to
Stop endpoint command.
Once the issue happens controller goes into bad state
and in that case controller needs to be reset.

Cc: <stable@vger.kernel.org>
Signed-off-by: NSandeep Singh <sandeep.singh@amd.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 9d9526cc3c01866943fb8f5b71ca0a767d16b1c3
bugzilla: 51875
CVE: NA

--------------------------------

commit dda32c00 upstream.

'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')

So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.

Be safe and pass the mem_flags to this function as well.

Fixes: ddba5cd0 ("xhci: Use command structures when queuing commands on the command ring")
Cc: <stable@vger.kernel.org>
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit ca043cc02a88b893c8f43da03ef94fd3e8a711d0
bugzilla: 51875
CVE: NA

--------------------------------

commit b8135111 upstream.

In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake
TCSS xHCI needs to be runtime suspended whenever possible to allow the
TCSS hardware block to enter D3cold and thus save energy.

Cc: stable@vger.kernel.org
Signed-off-by: NAbhijeet Rao <abhijeet.rao@intel.com>
Signed-off-by: NNikunj A. Dadhania <nikunj.dadhania@intel.com>
Signed-off-by: NAzhar Shaikh <azhar.shaikh@intel.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit fa4b1363256d2b0456a68e969fd416804726ef45
bugzilla: 51875
CVE: NA

--------------------------------

commit b9a0866a upstream.

device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: c1b0bc2d ("usb: typec: Add support for UCSI interface")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210504222337.3151726-1-andy.shevchenko@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit e5366bea0277425e1868ba20eeb27c879d5a6e2d
bugzilla: 51875
CVE: NA

--------------------------------

commit 1f4642b7 upstream.

commit 4dbc6a4e ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.

If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().

With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.

[  151.545106][   T70] Unexpected kernel BRK exception at EL1
[  151.545112][   T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[  151.545499][   T70] pc : ucsi_psy_get_prop+0x208/0x20c
[  151.545507][   T70] lr : power_supply_show_property+0xc0/0x328
...
[  151.545542][   T70] Call trace:
[  151.545544][   T70]  ucsi_psy_get_prop+0x208/0x20c
[  151.545546][   T70]  power_supply_uevent+0x1a4/0x2f0
[  151.545550][   T70]  dev_uevent+0x200/0x384
[  151.545555][   T70]  kobject_uevent_env+0x1d4/0x7e8
[  151.545557][   T70]  power_supply_changed_work+0x174/0x31c
[  151.545562][   T70]  process_one_work+0x244/0x6f0
[  151.545564][   T70]  worker_thread+0x3e0/0xa64

We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command.

Fixes: 992a60ed ("usb: typec: ucsi: register with power_supply class")
Fixes: 4dbc6a4e ("usb: typec: ucsi: save power data objects in PD mode")
Cc: stable@vger.kernel.org
Reported-and-tested-by: NSubbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: NJack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 9bd96a2e77fd71b39bfa3f710f6001f94da57c51
bugzilla: 51875
CVE: NA

--------------------------------

commit 18ffa988 upstream.

If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped.  Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.

Fixes: 8d99087c ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: stable@vger.kernel.org
Signed-off-by: NWesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 45f37f54e7c16e2981ba3a847c0778fd561888c3
bugzilla: 51875
CVE: NA

--------------------------------

commit d1d90dd2 upstream.

commit 72704f87 ("dwc3: gadget: Implement the suspend entry event
handler") introduced (nearly 5 years ago!) an interrupt handler for
U3/L1-L2 suspend events.  The problem is that these events aren't
currently enabled in the DEVTEN register so the handler is never
even invoked.  Fix this simply by enabling the corresponding bit
in dwc3_gadget_enable_irq() using the same revision check as found
in the handler.

Fixes: 72704f87 ("dwc3: gadget: Implement the suspend entry event handler")
Acked-by: NFelipe Balbi <balbi@kernel.org>
Signed-off-by: NJack Pham <jackp@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 9238492b9a8402d388c9fe370d3cbee838f97c3a
bugzilla: 51875
CVE: NA

--------------------------------

commit 975f94c7 upstream.

This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.

CC: <stable@vger.kernel.org>
Reported-by: NTianping Fang <tianping.fang@mediatek.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 45ad6b592e644c1c3c4d0858a891cf977c5a10b7
bugzilla: 51875
CVE: NA

--------------------------------

commit 75a41ce4 upstream.

The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.

A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.

Fixes: fe0b94ab ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: NMinas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NPhil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 7ad9256b49a6240f5344cfb0a069a7c9dba99567
bugzilla: 51875
CVE: NA

--------------------------------

commit ca09b1be upstream.

On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: NMaximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 42bb80ae01657b8201ea8b5fa6ac96e272429383
bugzilla: 51875
CVE: NA

--------------------------------

commit 04357faf upstream.

On Intel Merrifield LPM is causing host to reset port after a timeout.
By disabling LPM entirely this is prevented.

Fixes: 066c0959 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield")
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NFerry Toth <ftoth@exalondelft.nl>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210425150947.5862-1-ftoth@exalondelft.nlSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 95e3da5b53baae5a75567be9b0449953d08545e2
bugzilla: 51875
CVE: NA

--------------------------------

commit e17b02d4 upstream.

When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.

In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.

If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.
Signed-off-by: NMarcel Hamer <marcel@solidxs.se>
Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 3a96437f6bf85fa64e933cc100445f9278cee1ff
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 630ef623 ]

If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Fixes: 0d2602ca ("blk-mq: improve support for shared tags maps")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210513171529.7977-1-bvanassche@acm.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit c9c1ed08c174c2fa88fe1badbb876a7317a8224f
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 03f26d8f ]

In case of shared sbitmap, request won't be held in plug list any more
sine commit 32bc15af ("blk-mq: Facilitate a shared sbitmap per
tagset"), this way makes request merge from flush plug list & batching
submission not possible, so cause performance regression.

Yanhui reports performance regression when running sequential IO
test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk
is emulated with image stored on xfs/megaraid_sas.

Fix the issue by recovering original behavior to allow to hold request
in plug list.

Cc: Yanhui Ma <yama@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: kashyap.desai@broadcom.com
Fixes: 32bc15af ("blk-mq: Facilitate a shared sbitmap per tagset")
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210514022052.1047665-1-ming.lei@redhat.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit cde4b55cfb24522dcbba80bbdb0c082303e76c43
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 79ebe911 ]

Open /dev/nbdX first, the config_refs will be 1 and
the pointers in nbd_device are still null. Disconnect
/dev/nbdX, then reference a null recv_workq. The
protection by config_refs in nbd_genl_disconnect is useless.

[  656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020
[  656.368943] #PF: supervisor write access in kernel mode
[  656.369844] #PF: error_code(0x0002) - not-present page
[  656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0
[  656.371693] Oops: 0002 [#1] SMP
[  656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c8 #1
[  656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[  656.375904] RIP: 0010:mutex_lock+0x29/0x60
[  656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d
[  656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246
[  656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020
[  656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318
[  656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40
[  656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00
[  656.382166] FS:  00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
[  656.382806] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0
[  656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  656.384927] Call Trace:
[  656.385111]  flush_workqueue+0x92/0x6c0
[  656.385395]  nbd_disconnect_and_put+0x81/0xd0
[  656.385716]  nbd_genl_disconnect+0x125/0x2a0
[  656.386034]  genl_family_rcv_msg_doit.isra.0+0x102/0x1b0
[  656.386422]  genl_rcv_msg+0xfc/0x2b0
[  656.386685]  ? nbd_ioctl+0x490/0x490
[  656.386954]  ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0
[  656.387354]  netlink_rcv_skb+0x62/0x180
[  656.387638]  genl_rcv+0x34/0x60
[  656.387874]  netlink_unicast+0x26d/0x590
[  656.388162]  netlink_sendmsg+0x398/0x6c0
[  656.388451]  ? netlink_rcv_skb+0x180/0x180
[  656.388750]  ____sys_sendmsg+0x1da/0x320
[  656.389038]  ? ____sys_recvmsg+0x130/0x220
[  656.389334]  ___sys_sendmsg+0x8e/0xf0
[  656.389605]  ? ___sys_recvmsg+0xa2/0xf0
[  656.389889]  ? handle_mm_fault+0x1671/0x21d0
[  656.390201]  __sys_sendmsg+0x6d/0xe0
[  656.390464]  __x64_sys_sendmsg+0x23/0x30
[  656.390751]  do_syscall_64+0x45/0x70
[  656.391017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

Fixes: e9e006f5 ("nbd: fix max number of supported devs")
Signed-off-by: NSun Ke <sunke32@huawei.com>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit a9fc163514d209e038cc447590e1057a125367f7
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 8bfbfb0d ]

In f2fs_destroy_compress_ctx(), after f2fs_destroy_compress_ctx(),
cc.cluster_idx will be cleared w/ NULL_CLUSTER, f2fs_cluster_blocks()
may check wrong cluster metadata, fix it.

Fixes: 4c8ff709 ("f2fs: support data compression")
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 5639b73fd3bc6fc8ca72e3a9ac15aacaabd7ebff
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit a949dc5f ]

pos_fsstress testcase complains a panic as belew:

------------[ cut here ]------------
kernel BUG at fs/f2fs/compress.c:1082!
invalid opcode: 0000 [#1] SMP PTI
CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G           OE     5.12.0-rc1-custom #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: writeback wb_workfn (flush-252:16)
RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs]
Call Trace:
 f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs]
 f2fs_write_cache_pages+0x468/0x8a0 [f2fs]
 f2fs_write_data_pages+0x2a4/0x2f0 [f2fs]
 do_writepages+0x38/0xc0
 __writeback_single_inode+0x44/0x2a0
 writeback_sb_inodes+0x223/0x4d0
 __writeback_inodes_wb+0x56/0xf0
 wb_writeback+0x1dd/0x290
 wb_workfn+0x309/0x500
 process_one_work+0x220/0x3c0
 worker_thread+0x53/0x420
 kthread+0x12f/0x150
 ret_from_fork+0x22/0x30

The root cause is truncate() may race with overwrite as below,
so that one reference count left in page can not guarantee the
page attaching in mapping tree all the time, after truncation,
later find_lock_page() may return NULL pointer.

- prepare_compress_overwrite
 - f2fs_pagecache_get_page
 - unlock_page
					- f2fs_setattr
					 - truncate_setsize
					  - truncate_inode_page
					   - delete_from_page_cache
 - find_lock_page

Fix this by avoiding referencing updated page.

Fixes: 4c8ff709 ("f2fs: support data compression")
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 72b0f3077ebdc83336fb48f381cbd84eb04a017e
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit a12cc5b4 ]

In error path of f2fs_write_compressed_pages(), it needs to call
f2fs_compress_free_page() to release temporary page.

Fixes: 5e6bbde9 ("f2fs: introduce mempool for {,de}compress intermediate page allocation")
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 64f3410c7bfc389b1a58611d0799f4a36ce4b6b5
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 8cc365f9 ]

When running some traffic and taking down the link on peer, a
retry counter exceeded error is received. This leads to
nvmet_rdma_error_comp which tried accessing the cq_context to
obtain the queue. The cq_context is no longer valid after the
fix to use shared CQ mechanism and should be obtained similar
to how it is obtained in other functions from the wc->qp.

[ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12).
[ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[ 905.839919] PGD 0 P4D 0
[ 905.842464] Oops: 0000 1 SMP NOPTI
[ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1
[ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma]
[ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff
[ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246
[ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000
[ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000
[ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074
[ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010
[ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400
[ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000
[ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12).
[ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0
[ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 905.961857] PKRU: 55555554
[ 906.010315] Call Trace:
[ 906.012778] __ib_process_cq+0x89/0x170 [ib_core]
[ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core]
[ 906.022152] process_one_work+0x1a7/0x360
[ 906.026182] ? create_worker+0x1a0/0x1a0
[ 906.030123] worker_thread+0x30/0x390
[ 906.033802] ? create_worker+0x1a0/0x1a0
[ 906.037744] kthread+0x116/0x130
[ 906.040988] ? kthread_flush_work_fn+0x10/0x10
[ 906.045456] ret_from_fork+0x1f/0x40

Fixes: ca0f1a80 ("nvmet-rdma: use new shared CQ mechanism")
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit c98ecfb1829642daa063a541d81dc8384fda924b
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 608a9690 ]

When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.

Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-

[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0

Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-

nvmet_bdev_execute_rw()
	bio_add_page()
		__bio_add_page()
			WARN_ON_ONCE(bio_full(bio, len));

This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().

Fixes: 73383adf ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit f8ae879b776c28fb8fc47ae97c4ad45edac0be24
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 193fcf37 ]

In this preparation patch, we add helpers to convert lbas to sectors &
sectors to lba. This is needed to eliminate code duplication in the ZBD
backend.

Use these helpers in the block device backend.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 54dbe2d2c1fcabf650c7a8b747601da355cd7f9f
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit efed9a33 ]

__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).

This manifested as this UBSAN array index out of bounds error reported
by Jakub:

UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
 dump_stack+0xa4/0xe5
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
 queued_spin_lock_slowpath+0x476/0x480
 do_raw_spin_lock+0x1c2/0x1d0
 kyber_bio_merge+0x112/0x180
 blk_mq_submit_bio+0x1f5/0x1100
 submit_bio_noacct+0x7b0/0x870
 submit_bio+0xc2/0x3a0
 btrfs_map_bio+0x4f0/0x9d0
 btrfs_submit_data_bio+0x24e/0x310
 submit_one_bio+0x7f/0xb0
 submit_extent_page+0xc4/0x440
 __extent_writepage_io+0x2b8/0x5e0
 __extent_writepage+0x28d/0x6e0
 extent_write_cache_pages+0x4d7/0x7a0
 extent_writepages+0xa2/0x110
 do_writepages+0x8f/0x180
 __writeback_single_inode+0x99/0x7f0
 writeback_sb_inodes+0x34e/0x790
 __writeback_inodes_wb+0x9e/0x120
 wb_writeback+0x4d2/0x660
 wb_workfn+0x64d/0xa10
 process_one_work+0x53a/0xa80
 worker_thread+0x69/0x5b0
 kthread+0x20b/0x240
 ret_from_fork+0x1f/0x30

Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.

Fixes: a6088845 ("block: kyber: make kyber more friendly with merging")
Reported-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.comSigned-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit e2381174daeae0ca35eddffef02dcc8de8c1ef8a
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 0c8bd174 ]

If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.

Fixes: eb50aaf9 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit a8dc16bbfe29c49987b77ed9240b1f54e5af539b
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit d9ff1096 ]

'ret' is known to be 0 here.
Initialize 'ret' with the expected error code before using it.

Fixes: 0990366b ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.frSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 550473900f80945cb1a48c6d252d9da41ddc48ec
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 5216dff2 ]

The poll rate limiter time was initialized at zero. This breaks the
comparison in time_after if jiffies is large. Switch to storing the
next update time rather than the previous time, and initialize the
time when the device is probed.

Fixes: c10e753d ("hwmon (occ): Add sensor types and versions")
Signed-off-by: NEddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210429151336.18980-1-eajames@linux.ibm.comSigned-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 0becd19b211aab0a0b017fb5fe584431482eab0a
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit a60a3436 ]

'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.

So remove simplify the first error message.

While at it, also remove the useless initialization of 'retval'.

Fixes: 7d50195f ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.frSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 2c3b4375e1189acaed2d831df9b46057daa71b4f
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 70618035 ]

During commit 067fda1c ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: NThomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAlexandru Ardelean <aardelean@deviqon.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.comSigned-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 020fe6f80f4f1cc672687cdb59d438f8c031ef70
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit a2fa9242 ]

When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.

Fixes: 4ac4e086 ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cnSigned-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 9db8ba3cac0523308d70ac23739374d5af5c77a6
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit 8edb79af ]

When devm_request_threaded_irq() fails, we should decrease the
runtime PM counter to keep the counter balanced. But when
iio_device_register() fails, we need not to decrease it because
we have already decreased it before.
Signed-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Fixes: 97d642e2 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Link: https://lore.kernel.org/r/20210407034927.16882-1-dinghao.liu@zju.edu.cnSigned-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 1ea775021282d90e1d08d696b7ab54aa75d688e5
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit bb9c74a5 ]

As part of commit e81a7018 ("usb: dwc3: allocate gadget structure
dynamically") the dwc3_gadget_release() was added which will free
the dwc->gadget structure upon the device's removal when
usb_del_gadget_udc() is called in dwc3_gadget_exit().

However, simply freeing the gadget results a dangling pointer
situation: the endpoints created in dwc3_gadget_init_endpoints()
have their dep->endpoint.ep_list members chained off the list_head
anchored at dwc->gadget->ep_list.  Thus when dwc->gadget is freed,
the first dwc3_ep in the list now has a dangling prev pointer and
likewise for the next pointer of the dwc3_ep at the tail of the list.
The dwc3_gadget_free_endpoints() that follows will result in a
use-after-free when it calls list_del().

This was caught by enabling KASAN and performing a driver unbind.
The recent commit 568262bf ("usb: dwc3: core: Add shutdown
callback for dwc3") also exposes this as a panic during shutdown.

There are a few possibilities to fix this.  One could be to perform
a list_del() of the gadget->ep_list itself which removes it from
the rest of the dwc3_ep chain.

Another approach is what this patch does, by splitting up the
usb_del_gadget_udc() call into its separate "del" and "put"
components.  This allows dwc3_gadget_free_endpoints() to be
called before the gadget is finally freed with usb_put_gadget().

Fixes: e81a7018 ("usb: dwc3: allocate gadget structure dynamically")
Reviewed-by: NPeter Chen <peter.chen@kernel.org>
Signed-off-by: NJack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210501093558.7375-1-jackp@codeaurora.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 26c777470d576d427c1f8efccfd1bd86cdfec7f8
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit ad1237c3 ]

Justin reported broken build with LIBBPF_DYNAMIC=1.

When linking libbpf dynamically we need to use perf's
hashmap object, because it's not exported in libbpf.so
(only in libbpf.a).

Following build is now passing:

  $ make LIBBPF_DYNAMIC=1
    BUILD:   Doing 'make -j8' parallel build
    ...
  $ ldd perf | grep libbpf
        libbpf.so.0 => /lib64/libbpf.so.0 (0x00007fa7630db000)

Fixes: eee19501 ("perf tools: Grab a copy of libbpf's hashmap")
Reported-by: NJustin M. Forbes <jforbes@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210508205020.617984-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-5.10.38
commit 1d8d7e02f6d0a70793f1c450c008b72979252f5f
bugzilla: 51875
CVE: NA

--------------------------------

[ Upstream commit dbc03e81 ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: a4574f63 ("mm/memremap_pages: convert to 'struct range'")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210508021913.1727-1-thunder.leizhen@huawei.comSigned-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Acked-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>