Interrupt result flags have to be cleared before a hardware job is run.
Otherwise, if they are cleared asynchronously, we may end up clearing them
after the interrupt for which we wanted to wait has already arrived, thus
overwriting the job results that we intended to wait for.

To prevent this, clear the flags only under hw_lock and before running
a hardware job.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

G_CTRL on V4L2_CID_MIN_BUFFERS_FOR_CAPTURE will fail if userspace happens to
query it after getting a resolution change event and before the codec has
a chance to parse the header and switch to an initialized state.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:192:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:196:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c:196:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:32: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1757:3: warning: format ‘%zx’ expects argument of type ‘size_t’, but argument 6 has type ‘dma_addr_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1879:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:1206:32: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

As the s5p-mfc is a driver which use  multiplanar api, so the
vidioc_enum_fmt_vid serial of ioctl should only for
multiplanar, non-multiplanar shouldn't be implemented at all.
Signed-off-by: Nayaka <ayaka@soulik.info>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The following error: "error: incompatible types in conditional expression
(different base types)" was reported multiple times for the s5p-mfc
driver. This error was caused by two macro definitions - s5p_mfc_hw_call
(in s5p_mfc_common.h) and WRITEL (in s5p_mfc_opr_v6.c).

In the former case the macro assumed that all ops return a value, but some
ops return void. The solution to this problem was the addition of a
s5p_mfc_hw_call_void macro.

In the latter case the macro used the ?: construction to check whether
the address is non zero. This is not necessary after the driver left the
development and debugging cycle, so the READL and WRITEL macros were
removed.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It should take ctx->dst_fmt->num_planes as
the loop condition for CAPTURE.
Signed-off-by: NZhaowei Yuan <zhaowei.yuan@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes]
 int vidioc_decoder_cmd(struct file *file, void *priv,
     ^
drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume':
drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable]
  int pre_power;
      ^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes]
 struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void)
                         ^
drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes]
 struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void)
                         ^
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame':
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]
  unsigned int index;
               ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue':
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable]
  unsigned long mb_y_addr, mb_c_addr;
                           ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable]
  unsigned long mb_y_addr, mb_c_addr;
                ^
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level:
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes]
 int vidioc_encoder_cmd(struct file *file, void *priv,
     ^
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The CPB size is limited by the hardware. Add this limit to the s_fmt.
Signed-off-by: Npanpan liu <panpan1.liu@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

When a resolution change point is reached, queue an event to signal the
userspace that a new set of buffers is required before decoding can
continue.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds variant data and core support for
V8 decoder. This patch also adds the register definition
file for new firmware version v8 for MFC.
Signed-off-by: NKiran AVND <avnd.kiran@samsung.com>
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
[k.debski@samsung.com: Change MFC version macro name to MFC_V8_BIT]
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

MFC versions support a different set of formats, this specially applies
to the raw YUV formats. This patch changes enum_fmt, so that it only
reports formats that are supported by the used MFC version.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The patch adding the v6 version of MFC changed the default format for
the CAPTURE queue, but this also affects the v5 version. This patch
solves this problem by checking the MFC version before assigning the
default format.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Currently, we allocate private codec buffers on STREAMON, which may fail
if we are out of memory. We don't check for failure though, which will
make us crash with the codec accessing random memory.

We shouldn't be failing STREAMON with out of memory errors though. So move
the allocation of private codec buffers to REQBUFS for OUTPUT queue. Also,
move MFC instance opening and closing to REQBUFS as well, as it's tied to
allocation and deallocation of private codec buffers.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is in preparation for a new flow to fix issues with streamon, which
should not be allocating buffer memory.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

- Honor return values from vb2_reqbufs on REQBUFS(0).

- Do not set the number of allocated buffers to 0 if userspace tries
  to request buffers again without freeing them.

- There is no need to verify correct instance state on reqbufs, as we will
  verify this in queue_setup().

- There is also no need to verify that vb2_reqbufs() was able to allocate enough
  buffers (pb_count) and call buf_init on that many buffers (i.e. dst_buf_count
  is at least pb_count), because this will be verified by second queue_setup()
  call as well and vb2_reqbufs() will fail otherwise.

- Only verify state is MFCINST_INIT when allocating, not when freeing.

- Refactor and simplify code.
Signed-off-by: NPawel Osciak <posciak@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The vb2 core ignores any return code from the stop_streaming op.
And there really isn't anything it can do anyway in case of an error.
So change the return type to void and update any drivers that implement it.

The int return gave drivers the idea that this operation could actually
fail, but that's really not the case.

The pwc amd sdr-msi3101 drivers both had this construction:

        if (mutex_lock_interruptible(&s->v4l2_lock))
                return -ERESTARTSYS;

This has been updated to just call mutex_lock(). The stop_streaming op
expects this to really stop streaming and I very much doubt this will
work reliably if stop_streaming just returns without really stopping the
DMA.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The video encode/decode paths have duplicated logic between
VIDIOC_TRY_FMT and VIDIOC_S_FMT that should be de-duped.  Also, video
decode reports V4L2_PIX_FMT_NV12MT_16X16 output format, regardless of
what the actual output has been set at.  Fix this.
Signed-off-by: NJohn Sheu <sheu@google.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Cc: stable@vger.kernel.org

The MFC v6 specific code holds good for MFC v7 also as
the v7 version is a superset of v6 and the HW interface
remains more or less similar. This patch renames the macro
IS_MFCV6() to IS_MFCV6_PLUS() so that it can be used
for v7 also.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The video encode/decode paths have duplicated logic between
VIDIOC_TRY_FMT and VIDIOC_S_FMT that should be de-duped.  Also, video
decode reports V4L2_PIX_FMT_NV12MT_16X16 output format, regardless of
what the actual output has been set at.  Fix this.
Signed-off-by: NJohn Sheu <sheu@google.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

MFC v6 needs minimum number of output buffers to be queued
for encoder depending on the stream type and profile.
The patch modifies the driver so that encoding cannot be
started with lesser number of OUTPUT buffers than required.
This also fixes the crash happeninig during multi instance
encoder-decoder simultaneous run due to memory allocation
happening from interrupt context.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Correct spelling typo in various part of drivers
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for V4L2_DEC_CMD_STOP command which will instruct MFC device
to finish decoding and release all remaining frames kept for reference to
the user. After dequeueing last decoded frame the driver will generate an
V4L2_EVENT_EOS event.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyngmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Flushing of delay DPB buffers have to be done during stream off.
In MFC v6, it is done with a risc to host command.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NArun Mankuzhi <arun.m@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch enhances s5p-mfc with support for DMABUF exporting via
VIDIOC_EXPBUF ioctl.
Signed-off-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Multi Format Codec 6.x is a hardware video coding acceleration
module present in new Exynos5 SoC series. It is capable of
handling several new video codecs for decoding and encoding.
Signed-off-by: NJeongtae Park <jtp.park@samsung.com>
Signed-off-by: NJanghyuck Kim <janghyuck.kim@samsung.com>
Signed-off-by: NJaeryul Oh <jaeryul.oh@samsung.com>
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Modifies the driver to use a callback based architecture
for hardware dependent calls. This architecture is suitable
for supporting co-existence with newer versions of MFC hardware.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The patch renames hardware specific opr and cmd files to
opr_v5 and cmd_v5 respectively. This is done for accomodating
firmware v6. Also the shared memory management files are removed
and the functionality is added to the opr_v5 file.
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All code setting/clearing working context bits has been moved
to separate functions. set_bit/clear_bit have been replaced by
non-atomic variants - variable is already guarded by spin_lock.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

s5p-mfc encoder after receiving V4L2_ENC_CMD_STOP command
will instruct MFC device to release all encoded frames.
After dequeuing last encoded frame driver will generate
V4L2_EVENT_EOS event.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The remaining drivers are mostly platform drivers. Name the
dir to reflect it.

It makes sense to latter break it into a few other dirs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds new V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE
capability flags that are intended to be used for memory-to-memory (M2M)
devices, instead of ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT.

V4L2_CAP_VIDEO_M2M flag is added at the drivers, CAPTURE and OUTPUT
capability flags are left untouched and will be removed in future,
after a transition period required for existing applications to be
adapted to check only for V4L2_CAP_VIDEO_M2M.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Acked-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixed bugs in functions that initialize custom controls.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixed s_ctrl function when setting the following controls:
- V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER
- V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

MFC uses the multi-plane API, but it reported single-plane
when querying capabilities.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In preparation for the forthcoming VIDIOC_CREATE_BUFS ioctl add a
"const struct v4l2_format *" argument to the .queue_setup() vb2
operation.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the new flag there is no need anymore to have a separate is_volatile
field. Modify all users to use the new flag.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch changes the order of operations during stream on call. Now the
buffers are first queued to the driver and then the start_streaming method
is called.

This resolves the most common case when the driver needs to know buffer
addresses to enable dma engine and start streaming. Additional parameter
to start_streaming method have been added to simplify drivers code. The
driver are now obliged to check if the number of queued buffers is high
enough to enable hardware streaming. If not - it can return an error. In
such case all the buffers that have been pre-queued are invalidated.

This patch also updates all videobuf2 clients to work properly with the
changed order of operations.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
CC: Hans Verkuil <hverkuil@xs4all.nl>
CC: Tomasz Stanislawski <t.stanislaws@samsung.com>
CC: Sylwester Nawrocki <s.nawrocki@samsung.com>
CC: Kamil Debski <k.debski@samsung.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Josh Wu <josh.wu@atmel.com>
CC: Hans de Goede <hdegoede@redhat.com>
CC: Paul Mundt <lethal@linux-sh.org>
Tested-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the correct 'dma_addr' name for the buffer address. 'paddr' suggested
that this is the physical address in system memory. For most ARM platforms
these two are the same, but this is not a generic rule. 'dma_addr' will
also point better to dma-mapping api.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Plane sizes array was declared as unsigned long[], while unsigned int is
more than enough for storing size of the video buffer. This patch reduces
the size of the array by definiting it as unsigned int[].
Reported-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>