We don't need to repeatedly spam the kernel logs with the same warning
about unhandled passthrough IO effects. Just one warning is sufficient
to observe this condition occurs.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

All nvme transport drivers preallocate an nvme command for each request.
Assume to use that command for nvme_setup_cmd() instead of requiring
drivers pass a pointer to it. All nvme drivers must initialize the
generic nvme_request 'cmd' to point to the transport's preallocated
nvme_command.

The generic nvme_request cmd pointer had previously been used only as a
temporary copy for passthrough commands. Since it now points to the
command that gets dispatched, passthrough commands must directly set it
up prior to executing the request.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Except for pci, all the nvme transport drivers allocate a command within
the driver's pdu. Align pci with everyone else by allocating the nvme
command within pci's pdu and replace the .queue_rq() stack variable with
this.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

According to the NVM specifications, the model number size should be
40 bytes (bytes 63:24 of the Identify Controller data structure).
Therefore, any attempt to store a value into model_number which
exceeds 40 bytes should return an error.
Reviewed-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: NNoam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function nvmet_ctrl_find_get() accepts out pointer to nvmet_ctrl
structure. This function returns the same error value from two places
that is :- NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR.

Move this to the caller so we can change the return type to nvmet_ctrl.

Now that we can changed the return type, instead of taking out pointer
to the nvmet_ctrl structure remove that function parameter and return
the valid nvmet_ctrl pointer on success and NULL on failure.

Also, add and rename the goto labels for more readability with comments.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add minimum description of the hosthandle parameter for
nvmet_fc_rcv_ls_req() so that we can get rid of the following warning.

drivers/nvme//target/fc.c:2009: warning: Function parameter or member 'hosthandle' not described in 'nvmet_fc_rcv_ls_req
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The nvme_fc_rcv_ls_req() function has first argument as pointer to
remoteport named portprt, but in the documentation comment that is name
is used as remoteport. Fix that to get rid if the compilation warning.

drivers/nvme//host/fc.c:1724: warning: Function parameter or member 'portptr' not described in 'nvme_fc_rcv_ls_req'
drivers/nvme//host/fc.c:1724: warning: Excess function parameter 'remoteport' description in 'nvme_fc_rcv_ls_req'
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and
nvme_pr_release() after variable declaration which follows the rest of
the code in the nvme/host/core.c.

No functional change(s) in this patch.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

nvme_clear_request() has a check for flag REQ_DONTPREP and it is called
from nvme_init_request() and nvme_setuo_cmd().

The function nvme_init_request() is called from nvme_alloc_request()
and nvme_alloc_request_qid(). From these two callers new request is
allocated everytime. For newly allocated request RQF_DONTPREP is never
set. Since after getting a tag, block layer sets the req->rq_flags == 0
and never sets the REQ_DONTPREP when returning the request :-

nvme_alloc_request()
	blk_mq_alloc_request()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

nvme_alloc_request_qid()
	blk_mq_alloc_request_hctx()
		blk_mq_rq_ctx_init()
			rq->rq_flags = 0 <----

The block layer does set req->rq_flags but REQ_DONTPREP is not one of
them and that is set by the driver.

That means we can unconditinally set the REQ_DONTPREP value to the
rq->rq_flags when nvme_init_request()->nvme_clear_request() is called
from above two callers.

Move the check for REQ_DONTPREP from nvme_clear_nvme_request() into
nvme_setup_cmd().

This is needed since nvme_alloc_request() now gets called from fast
path when NVMeOF target is configured with passthru backend to avoid
unnecessary checks in the fast path.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since nvmet_setup_passthru() function falls in fast path when called
from the NVMeOF passthru backend, make it inline.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The function nvme_init_ctrl_finish() (formerly nvme_init_identify()) has
grown over the period of time about ~200 lines given the size of nvme id
ctrl data structure.

Move the nvme_id_ctrl data structure related initilzation into helper
nvme_init_identify() and call it from nvme_init_ctrl_finish().

When we move the code into nvme_init_identify() change the local
variable i from int to unsigned int and remove the duplicate kfree()
after nvme_mpath_init() and jump to the label out_free if
nvme_mpath_ini() fails.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is a prep patch so that we can move the identify data structure
related code initialization from nvme_init_identify() into a helper.

Rename the function nvmet_init_identify() to nvmet_init_ctrl_finish().

Next patch will move the nvme_id_ctrl related initialization from newly
renamed function nvme_init_ctrl_finish() into the nvme_init_identify()
helper.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For passthrough I/O commands, effects are usually to be zero.
nvme_passthrough_end() does three checks in futility for this case.
Bail out of function-call/checks.
Signed-off-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use the proper macro instead of hard-coded value.
Signed-off-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of the using the whitespaces use tab spacing in the
nvmet_execute_identify_ns().
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In nvmet_check_ctrl_status() cmd can be derived from nvmet_req. Remove
the local variable cmd in the nvmet_check_ctrl_status() and function
parameter cmd for nvmet_check_ctrl_status(). Derive the cmd value from
req parameter in the nvmet_check_ctrl_status().
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Instead of updating the error log page in the caller of the
nvmet_alloc_ctrt() update the error log page in the nvmet_alloc_ctrl().
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In the function nvmet_alloc_ctrl() we assign status value before we
call nvmet_fine_get_subsys() to:

	status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;

After we successfully find the subsystem we again set the status value
to:

	status = NVME_SC_CONNECT_INVALID_PARAM | NVME_SC_DNR;

Remove the duplicate status assignment value.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Get rid of a local variable that is not needed and just return the
status directly.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The barriers were added to the nvme_irq() in commit 3a7afd8e
("nvme-pci: remove the CQ lock for interrupt driven queues") to prevent
compiler from doing memory optimization for the variabes that were
protected previously by spinlock in nvme_irq() at completion queue
processing and with queue head check condition.

The variable nvmeq->last_cq_head from those checks was removed in the
commit f6c4d97b ("nvme/pci: Remove last_cq_head") that was not
allwing poll queues from mistakenly triggering the spurious interrupt
detection.

Remove the barriers which were protecting the updates to the variables.
Reported-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There's no need to declare a list and then init it manually,
just use the LIST_HEAD() macro.
Signed-off-by: NShixin Liu <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20210329095349.4170870-2-liushixin2@huawei.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: NShixin Liu <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20210329095349.4170870-1-liushixin2@huawei.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

No implementations left.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210308074550.422714-4-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>

->revalidate_disk is only called during add_disk for pd, but at that
point the driver has already set the capacity to the one returned from
Identify a little earlier, so this additional update is entirely
superflous.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210308074550.422714-2-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers

Pull MD updates from Song:

"The major changes are:

  1. Performance improvement for raid10 discard requests, from Xiao Ni.
  2. Fix missing information of /proc/mdstat, from Jan Glauber."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: Fix missing unused status line of /proc/mdstat
  md/raid10: improve discard request for far layout
  md/raid10: improve raid10 discard request
  md/raid10: pull the code that wait for blocked dev into one function
  md/raid10: extend r10bio devs to raid disks
  md: add md_submit_discard_bio() for submitting discard bio

Reading /proc/mdstat with a read buffer size that would not
fit the unused status line in the first read will skip this
line from the output.

So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something
like: unused devices: <none>

Don't return NULL immediately in start() for v=2 but call
show() once to print the status line also for multiple reads.

Cc: stable@vger.kernel.org
Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NJan Glauber <jglauber@digitalocean.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

For far layout, the discard region is not continuous on disks. So it needs
far copies r10bio to cover all regions. It needs a way to know all r10bios
have finish or not. Similar with raid10_sync_request, only the first r10bio
master_bio records the discard bio. Other r10bios master_bio record the
first r10bio. The first r10bio can finish after other r10bios finish and
then return the discard bio.
Tested-by: NAdrian Huang <ahuang12@lenovo.com>
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

Now the discard request is split by chunk size. So it takes a long time
to finish mkfs on disks which support discard function. This patch improve
handling raid10 discard request. It uses the similar way with patch
29efc390 (md/md0: optimize raid0 discard handling).

But it's a little complex than raid0. Because raid10 has different layout.
If raid10 is offset layout and the discard request is smaller than stripe
size. There are some holes when we submit discard bio to underlayer disks.

For example: five disks (disk1 - disk5)
D01 D02 D03 D04 D05
D05 D01 D02 D03 D04
D06 D07 D08 D09 D10
D10 D06 D07 D08 D09
The discard bio just wants to discard from D03 to D10. For disk3, there is
a hole between D03 and D08. For disk4, there is a hole between D04 and D09.
D03 is a chunk, raid10_write_request can handle one chunk perfectly. So
the part that is not aligned with stripe size is still handled by
raid10_write_request.

If reshape is running when discard bio comes and the discard bio spans the
reshape position, raid10_write_request is responsible to handle this
discard bio.

I did a test with this patch set.
Without patch:
time mkfs.xfs /dev/md0
real4m39.775s
user0m0.000s
sys0m0.298s

With patch:
time mkfs.xfs /dev/md0
real0m0.105s
user0m0.000s
sys0m0.007s

nvme3n1           259:1    0   477G  0 disk
└─nvme3n1p1       259:10   0    50G  0 part
nvme4n1           259:2    0   477G  0 disk
└─nvme4n1p1       259:11   0    50G  0 part
nvme5n1           259:6    0   477G  0 disk
└─nvme5n1p1       259:12   0    50G  0 part
nvme2n1           259:9    0   477G  0 disk
└─nvme2n1p1       259:15   0    50G  0 part
nvme0n1           259:13   0   477G  0 disk
└─nvme0n1p1       259:14   0    50G  0 part
Reviewed-by: NColy Li <colyli@suse.de>
Reviewed-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: NAdrian Huang <ahuang12@lenovo.com>
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

The following patch will reuse these logics, so pull the same codes into
one function.
Tested-by: NAdrian Huang <ahuang12@lenovo.com>
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit
to all member disks and it needs to use r10bio. So extend to
r10bio->devs[geo.raid_disks].
Reviewed-by: NColy Li <colyli@suse.de>
Tested-by: NAdrian Huang <ahuang12@lenovo.com>
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

Move these logic from raid0.c to md.c, so that we can also use it in
raid10.c.
Reviewed-by: NColy Li <colyli@suse.de>
Reviewed-by: NGuoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: NAdrian Huang <ahuang12@lenovo.com>
Signed-off-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NSong Liu <songliubraving@fb.com>

This removes the driver on the premise that it has been unused for a long
time. This is a better approach compared to changing untestable code
nobody cares about in the first place. Similarly, the umem.com website now
shows a mere Godaddy parking add.
Acked-by: NNeilBrown <neilb@suse.de>
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The returned string from rsxx_card_state_to_str is 'const',
but the other qualifier doesn't change anything here except
causing a warning with 'clang -Wextra':

drivers/block/rsxx/core.c:393:21: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
static const char * const rsxx_card_state_to_str(unsigned int state)

Fixes: f3791203 ("block: IBM RamSan 70/80 trivial changes.")
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323215753.281668-1-arnd@kernel.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
systems. The driver is not regularly tested and very likely not working for
quite a long time that's why remove it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Wire up device_driver->dev_groups, so that really_probe() creates the
sysfs attributes for us automatically.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: NJan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: NStefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316094513.2601218-3-sth@linux.ibm.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

commit e03c5941 ("s390/dasd: Remove unused parameter from
dasd_generic_probe()") allows us to wire the generic callback up
directly, avoiding the additional level of indirection.

While at it also remove the forward declaration for the dasd_fba_driver
struct, it's no longer needed.
Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: NJan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: NStefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316094513.2601218-2-sth@linux.ibm.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

Doing a

	prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);

will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.

/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.

This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Thomas Gleixner:
 "A set of irqchip updates:

   - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct

   - Add a missing DT compatible string for the Ingenic driver

   - Remove the pointless debugfs_file pointer from struct irqdomain"

* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Add support for the JZ4760
  dt-bindings/irq: Add compatible string for the JZ4760B
  irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
  irqdomain: Remove debugfs_file from struct irq_domain

Pull timer fix from Thomas Gleixner:
 "A single fix in for hrtimers to prevent an interrupt storm caused by
  the lack of reevaluation of the timers which expire in softirq context
  under certain circumstances, e.g. when the clock was set"

* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()