drivers/block: remove the umem driver

This removes the driver on the premise that it has been unused for a long
time. This is a better approach compared to changing untestable code
nobody cares about in the first place. Similarly, the umem.com website now
shows a mere Godaddy parking add.
Acked-by: NNeilBrown <neilb@suse.de>
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

arch/mips/configs/malta_defconfig

@@ -227,7 +227,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
-CONFIG_BLK_DEV_UMEM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m

arch/mips/configs/malta_kvm_defconfig

@@ -232,7 +232,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
-CONFIG_BLK_DEV_UMEM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m

arch/mips/configs/maltaup_xpa_defconfig

@@ -230,7 +230,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
-CONFIG_BLK_DEV_UMEM=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m

drivers/block/Kconfig

@@ -121,23 +121,6 @@ source "drivers/block/mtip32xx/Kconfig"
 
 source "drivers/block/zram/Kconfig"
 
-config BLK_DEV_UMEM
-	tristate "Micro Memory MM5415 Battery Backed RAM support"
-	depends on PCI
-	help
-	  Saying Y here will include support for the MM5415 family of
-	  battery backed (Non-volatile) RAM cards.
-	  <http://www.umem.com/>
-
-	  The cards appear as block devices that can be partitioned into
-	  as many as 15 partitions.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called umem.
-
-	  The umem driver has not yet been allocated a MAJOR number, so
-	  one is chosen dynamically.
-
 config BLK_DEV_UBD
 	bool "Virtual block device"
 	depends on UML

drivers/block/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+= pktcdvd.o
 obj-$(CONFIG_SUNVDC)		+= sunvdc.o
 
-obj-$(CONFIG_BLK_DEV_UMEM)	+= umem.o
 obj-$(CONFIG_BLK_DEV_NBD)	+= nbd.o
 obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
 obj-$(CONFIG_VIRTIO_BLK)	+= virtio_blk.o

drivers/block/umem.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-
-/*
- * This file contains defines for the
- *   Micro Memory MM5415
- * family PCI Memory Module with Battery Backup.
- *
- * Copyright Micro Memory INC 2001.  All rights reserved.
- */
-
-#ifndef _DRIVERS_BLOCK_MM_H
-#define _DRIVERS_BLOCK_MM_H
-
-
-#define IRQ_TIMEOUT (1 * HZ)
-
-/* CSR register definition */
-#define MEMCTRLSTATUS_MAGIC	0x00
-#define  MM_MAGIC_VALUE		(unsigned char)0x59
-
-#define MEMCTRLSTATUS_BATTERY	0x04
-#define  BATTERY_1_DISABLED	0x01
-#define  BATTERY_1_FAILURE	0x02
-#define  BATTERY_2_DISABLED	0x04
-#define  BATTERY_2_FAILURE	0x08
-
-#define MEMCTRLSTATUS_MEMORY	0x07
-#define  MEM_128_MB		0xfe
-#define  MEM_256_MB		0xfc
-#define  MEM_512_MB		0xf8
-#define  MEM_1_GB		0xf0
-#define  MEM_2_GB		0xe0
-
-#define MEMCTRLCMD_LEDCTRL	0x08
-#define  LED_REMOVE		2
-#define  LED_FAULT		4
-#define  LED_POWER		6
-#define	 LED_FLIP		255
-#define  LED_OFF		0x00
-#define  LED_ON			0x01
-#define  LED_FLASH_3_5		0x02
-#define  LED_FLASH_7_0		0x03
-#define  LED_POWER_ON		0x00
-#define  LED_POWER_OFF		0x01
-#define  USER_BIT1		0x01
-#define  USER_BIT2		0x02
-
-#define MEMORY_INITIALIZED	USER_BIT1
-
-#define MEMCTRLCMD_ERRCTRL	0x0C
-#define  EDC_NONE_DEFAULT	0x00
-#define  EDC_NONE		0x01
-#define  EDC_STORE_READ		0x02
-#define  EDC_STORE_CORRECT	0x03
-
-#define MEMCTRLCMD_ERRCNT	0x0D
-#define MEMCTRLCMD_ERRSTATUS	0x0E
-
-#define ERROR_DATA_LOG		0x20
-#define ERROR_ADDR_LOG		0x28
-#define ERROR_COUNT		0x3D
-#define ERROR_SYNDROME		0x3E
-#define ERROR_CHECK		0x3F
-
-#define DMA_PCI_ADDR		0x40
-#define DMA_LOCAL_ADDR		0x48
-#define DMA_TRANSFER_SIZE	0x50
-#define DMA_DESCRIPTOR_ADDR	0x58
-#define DMA_SEMAPHORE_ADDR	0x60
-#define DMA_STATUS_CTRL		0x68
-#define  DMASCR_GO		0x00001
-#define  DMASCR_TRANSFER_READ	0x00002
-#define  DMASCR_CHAIN_EN	0x00004
-#define  DMASCR_SEM_EN		0x00010
-#define  DMASCR_DMA_COMP_EN	0x00020
-#define  DMASCR_CHAIN_COMP_EN	0x00040
-#define  DMASCR_ERR_INT_EN	0x00080
-#define  DMASCR_PARITY_INT_EN	0x00100
-#define  DMASCR_ANY_ERR		0x00800
-#define  DMASCR_MBE_ERR		0x01000
-#define  DMASCR_PARITY_ERR_REP	0x02000
-#define  DMASCR_PARITY_ERR_DET	0x04000
-#define  DMASCR_SYSTEM_ERR_SIG	0x08000
-#define  DMASCR_TARGET_ABT	0x10000
-#define  DMASCR_MASTER_ABT	0x20000
-#define  DMASCR_DMA_COMPLETE	0x40000
-#define  DMASCR_CHAIN_COMPLETE	0x80000
-
-/*
-3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE
-READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA
-TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE
-TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS
-(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6,
-AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING
-DMA READ OPERATIONS.
-*/
-#define        DMASCR_READ   0x60000000
-#define        DMASCR_READLINE   0xE0000000
-#define        DMASCR_READMULTI   0xC0000000
-
-
-#define DMASCR_ERROR_MASK	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR)
-#define DMASCR_HARD_ERROR	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR)
-
-#define WINDOWMAP_WINNUM	0x7B
-
-#define DMA_READ_FROM_HOST 0
-#define DMA_WRITE_TO_HOST 1
-
-struct mm_dma_desc {
-	__le64	pci_addr;
-	__le64	local_addr;
-	__le32	transfer_size;
-	u32	zero1;
-	__le64	next_desc_addr;
-	__le64	sem_addr;
-	__le32	control_bits;
-	u32	zero2;
-
-	dma_addr_t data_dma_handle;
-
-	/* Copy of the bits */
-	__le64	sem_control_bits;
-} __attribute__((aligned(8)));
-
-/* bits for card->flags */
-#define UM_FLAG_DMA_IN_REGS		1
-#define UM_FLAG_NO_BYTE_STATUS		2
-#define UM_FLAG_NO_BATTREG		4
-#define	UM_FLAG_NO_BATT			8
-#endif