* msm-core:
  msm: Clean up useless ifdefs
  msm: clock: Add support for more proc_comm clocks
  msm: clock: Invert debugfs directory layout
  msm: clock: Move debugfs code from clock.c to clock-debug.c
  msm: clock: Remove 7x30 and pcom includes from clock.h
  msm: clock: Remove unused code and definitions
  msm: Warning fix in trout gpio board file
  msm: Remove broken register definition from trout

Remove ifdefs that do nothing, either from having the code
between them previously removed, or from having been
accidentally added to the wrong file.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add support for the ce, codec_ssbi, uart clocks, and i2c clocks.
Reviewed-by: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

There are currently 3 separate directories for clock debugging in
debugfs: clk_enable, clk_rate, and clk_local. Each of these
directories contains a list of clocks. This is rather annoying
when you are focusing on one clock and want to enable/disable it
and then check its rate. You either have to cd to the other
directory or cat ../clk_rate/<clk>.

Invert the layout so that there is one clock directory containing
a directory for each clock. Inside each respective clock
directory place an enable, rate, and is_local file relating to
the clk_enable, clk_disable, and clk_local directories that exist
today.
Reviewed-by: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

The clock debugfs code is large enough, and easy enough to separate,
that it deserves its own file which is compiled only when
CONFIG_DEBUG_FS is enabled.

Also, cleanup header file #includes that are no longer required.
Reviewed-by: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NMatt Wagantall <mattw@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

clock.h includes clock-pcom.h and clock-7x30.h when it really
doesn't need to. Remove the includes and fixup breakages.
Reviewed-By: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

This code is dead or otherwise useless so just remove it.
Reviewed-by: NSaravana Kannan <skannan@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

arch/arm/mach-msm/board-trout-gpio.c: In function 'trout_gpio_to_irq':
arch/arm/mach-msm/board-trout-gpio.c:77: error: unused variable 'msm_gpio'
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Missed a register change with the clock cleanup on the MSM7x01 targets.
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

* msm-8960:
  msm: Support for the MSM8960 RUMI3 target
  msm: Support for the MSM8960 Simulator target
  msm: Makefile cleanup
  msm: timer: Timer support for MSM8960
  msm: Add MSM 8960 cpu_is check
  msm: irqs-8960: Interrupt map for MSM8960
  msm: Physical offset for MSM8960
  msm: io: I/O register definitions for MSM8960
  msm: Generalize QGIC registers
  msm: Generalize timer register mappings
  msm: Add CPU queries

* msm-fb:
  video/msm_fb: use system_wq instead of dedicated workqueues

With cmwq, there's no reason to use separate workqueues.  Drop
msmfb_info->resume_workqueue and use system_wq instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-usb@vger.kernel.org
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

* msm-sdcc:
  msm: 8x50: Add initial support for SDCC
  mmc: msm_sdcc: Add gpio handling function to driver
  drivers: mmc: msm: remove clock disable in probe
  mmc: msm: fix dma usage not to use internal APIs

* msm-8960:
  msm: Support for the MSM8960 RUMI3 target
  msm: Support for the MSM8960 Simulator target
  msm: Makefile cleanup
  msm: timer: Timer support for MSM8960
  msm: Add MSM 8960 cpu_is check
  msm: irqs-8960: Interrupt map for MSM8960
  msm: Physical offset for MSM8960
  msm: io: I/O register definitions for MSM8960
  msm: Generalize QGIC registers
  msm: Generalize timer register mappings
  msm: Add CPU queries

* msm-uart:
  serial: msm: Add support for UARTDM cores
  msm: Add name field to UART resources

This is completely board specific and therefore must be provided
on a per-board basis.
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>

Configure SDCC GPIOs when the host is powered up or powered off.
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>

The probe function adds the MMC host which can start accepting request
immediately. There is an assumption here that no requests happen
immediatly, but it's not always the case. This assumption can causes
a BUG() when the clocks are disabled. The fix is to just remove the
clock disable in the probe function.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

Remove parts of this driver which use internal API calls. This
replaces the calls as suggested by Russell King.

Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

Add support for the next-generation version of the MSM UART
to the msm_serial driver. This version of the hardware is
similar to the original version, but has some DMA
capabilities that are used in PIO mode in this driver.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add a name field to the I/O resources for the UARTs on MSM
targets in preparation for updates to the msm_serial
driver. The driver assumed there is one I/O resource per
UART, which is not the case on all targets.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add the machine record, init code, and build support for
the MSM8960 RUMI3.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add the board file, Kconfig options, and Makefile options
needed to build for the MSM8960 Simulator target.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Clean up some of the conditionals in the Makefile in
preparation for adding build support for MSM8960.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Modify the macros in the MSM timer driver to support the
MSM8960 chip.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add the interrupt map for the Qualcomm MSM8960 chip. This
chip has an interrupt map that is different from previous
targets.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add the physical memory offset value for the Qualcomm
MSM8960 chip.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Add the register address definitions for the basic hardware
blocks on the Qualcomm MSM8960 chip.
Signed-off-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

The QGIC registers are mapped to the same virtual addresses across
targets, only the physical address changes.  Move the BASE address out
of target-specific files, and add a SOC name to the base addresses.
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Allow the timer register to be determined dynamically instead of at
compile time.  Use common virtual addresses for the registers across
all MSM chips, and select the register mappings based on the detected
CPU.
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Create runtime queries to distinguish the various MSM targets.
Although these would probably be better named soc_is..., use
cpu_is... to match convention in the rest of the kernel.

Hard code the tests based on config options for now.  When runtime
device detection is implemented, these can be made dynamic.
Signed-off-by: NDavid Brown <davidb@codeaurora.org>

Fix up comments in the key management code.  No functional changes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix up CIFSSMBEcho for unaligned access
  cifs: fix unaligned accesses in cifsConvertToUCS
  cifs: clean up unaligned accesses in cifs_unicode.c
  cifs: fix unaligned access in check2ndT2 and coalesce_t2
  cifs: clean up unaligned accesses in validate_t2
  cifs: use get/put_unaligned functions to access ByteCount
  cifs: move time field in cifsInodeInfo
  cifs: TCP_Server_Info diet
  CIFS: Implement cifs_strict_readv (try #4)
  CIFS: Implement cifs_file_strict_mmap (try #2)
  CIFS: Implement cifs_strict_fsync
  CIFS: Make cifsFileInfo_put work with strict cache mode

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  x86,percpu: Move out of place 64 bit ops into X86_64 section

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
  workqueue: relax lockdep annotation on flush_work()