提交 ba5499eb 编写于 作者: D Dima Zavin 提交者: David Brown

ARM: msm: 7x30: don't force a gpiomux table for the whole arch

This is completely board specific and therefore must be provided
on a per-board basis.
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
上级 1bae4ce2
......@@ -30,7 +30,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
ifdef CONFIG_MSM_V2_TLMM
......
......@@ -36,6 +36,7 @@
#include <mach/vreg.h>
#include "devices.h"
#include "gpiomux.h"
#include "proc_comm.h"
extern struct sys_timer msm_timer;
......@@ -52,6 +53,27 @@ static struct msm_otg_platform_data msm_otg_pdata = {
.otg_control = OTG_PHY_CONTROL,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
#ifdef CONFIG_SERIAL_MSM_CONSOLE
[49] = { /* UART2 RFR */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[50] = { /* UART2 CTS */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[51] = { /* UART2 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[52] = { /* UART2 TX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
#endif
};
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
&msm_device_uart2,
......
/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include "gpiomux.h"
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
#ifdef CONFIG_SERIAL_MSM_CONSOLE
[49] = { /* UART2 RFR */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[50] = { /* UART2 CTS */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[51] = { /* UART2 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
[52] = { /* UART2 TX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_2 | GPIOMUX_VALID,
},
#endif
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册