- 26 7月, 2023 40 次提交
-
-
由 Sebastian Falbesoner 提交于
stable inclusion from stable-v5.10.158 commit ef767907e77d00f46d0b59e5530b4f2e2d34f5ba category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ef767907e77d00f46d0b59e5530b4f2e2d34f5ba -------------------------------- commit a3cab1d2 upstream. With the current logic the "failed to exit halt state" error would be shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL register, since the right hand side is always true. Fix this by using the correct operator (bit-wise instead of logical AND) to only check for the halt bit flag, which was obviously intended here. Fixes: 85236d2b ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE") Signed-off-by: NSebastian Falbesoner <sebastian.falbesoner@gmail.com> Acked-by: NHaibo Chen <haibo.chen@nxp.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Christian Löhle 提交于
stable inclusion from stable-v5.10.158 commit 46ee041cd655edfb43bb9c867fdb9e2151c2f52c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=46ee041cd655edfb43bb9c867fdb9e2151c2f52c -------------------------------- commit 489d1445 upstream. Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely included DISCARD too. Fixes: b3bf9153 ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: NChristian Loehle <cloehle@hyperstone.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Ye Bin 提交于
stable inclusion from stable-v5.10.158 commit b79be962b567e857470b454d564baea5014ee94b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b79be962b567e857470b454d564baea5014ee94b -------------------------------- commit f4307b4d upstream. In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's being used when removing the debugfs files when the mmc_test module is removed. Fixes: a04c50aa ("mmc: core: no need to check return value of debugfs_create functions") Signed-off-by: NYe Bin <yebin10@huawei.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org [Ulf: Re-wrote the commit msg] Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Goh, Wei Sheng 提交于
stable inclusion from stable-v5.10.158 commit d4fc344c0d9c06ea1c1fafa69efac4fed9cd0dd2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d4fc344c0d9c06ea1c1fafa69efac4fed9cd0dd2 -------------------------------- commit cc3d2b5f upstream. Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command is issued. This fix ensures the flow control change is reflected directly in the GMAC_RX_FLOW_CTRL_RFE register. Fixes: 46f69ded ("net: stmmac: Use resolved link config in mac_link_up()") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: NGoh, Wei Sheng <wei.sheng.goh@intel.com> Signed-off-by: NNoor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Andy Shevchenko 提交于
stable inclusion from stable-v5.10.158 commit 549e24409ac579b4ad871d43d8781a1dc9b4aaeb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=549e24409ac579b4ad871d43d8781a1dc9b4aaeb -------------------------------- commit 6989ea48 upstream. The firmware on some systems may configure GPIO pins to be an interrupt source in so called "direct IRQ" mode. In such cases the GPIO controller driver has no idea if those pins are being used or not. At the same time, there is a known bug in the firmwares that don't restore the pin settings correctly after suspend, i.e. by an unknown reason the Rx value becomes inverted. Hence, let's save and restore the pins that are configured as GPIOs in the input mode with GPIROUTIOXAPIC bit set. Cc: stable@vger.kernel.org Reported-and-tested-by: NDale Smith <dalepsmith@gmail.com> Reported-and-tested-by: NJohn Harris <jmharris@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Pawan Gupta 提交于
stable inclusion from stable-v5.10.158 commit 471fb7b735bf9dd1caf2c8751158b81a3d9a5584 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=471fb7b735bf9dd1caf2c8751158b81a3d9a5584 -------------------------------- commit 66065157 upstream. The "force" argument to write_spec_ctrl_current() is currently ambiguous as it does not guarantee the MSR write. This is due to the optimization that writes to the MSR happen only when the new value differs from the cached value. This is fine in most cases, but breaks for S3 resume when the cached MSR value gets out of sync with the hardware MSR value due to S3 resetting it. When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write is skipped. Which results in SPEC_CTRL mitigations not getting restored. Move the MSR write from write_spec_ctrl_current() to a new function that unconditionally writes to the MSR. Update the callers accordingly and rename functions. [ bp: Rework a bit. ] Fixes: caa0ff24 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value") Suggested-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: NBorislav Petkov (AMD) <bp@alien8.de> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 ZhangPeng 提交于
stable inclusion from stable-v5.10.158 commit e858917ab785afe83c14f5ac141301216ccda847 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e858917ab785afe83c14f5ac141301216ccda847 -------------------------------- commit f0a0ccda upstream. Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations. Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.comSigned-off-by: NZhangPeng <zhangpeng362@huawei.com> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com Tested-by: NRyusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Tiezhu Yang 提交于
stable inclusion from stable-v5.10.158 commit 6ddf788400dd3f5b75f807164bf91a59ee6b3b32 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6ddf788400dd3f5b75f807164bf91a59ee6b3b32 -------------------------------- commit a435874b upstream. The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this up by moving the related file to use "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: NTiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: NSergey Senozhatsky <senozhatsky@chromium.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Steven Rostedt (Google) 提交于
stable inclusion from stable-v5.10.158 commit c099d12c5502b3eff5dd7b22815e480ff9aefe16 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c099d12c5502b3eff5dd7b22815e480ff9aefe16 -------------------------------- commit a4412fdd upstream. The config to be able to inject error codes into any function annotated with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is enabled. But unfortunately, this is always enabled on x86 when KPROBES is enabled, and there's no way to turn it off. As kprobes is useful for observability of the kernel, it is useful to have it enabled in production environments. But error injection should be avoided. Add a prompt to the config to allow it to be disabled even when kprobes is enabled, and get rid of the "def_bool y". This is a kernel debug feature (it's in Kconfig.debug), and should have never been something enabled by default. Cc: stable@vger.kernel.org Fixes: 540adea3 ("error-injection: Separate error-injection from kprobe") Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Jisheng Zhang 提交于
stable inclusion from stable-v5.10.158 commit 26b6f927bb86bf32b081866851688ad2cdfc9472 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=26b6f927bb86bf32b081866851688ad2cdfc9472 -------------------------------- commit 74f6bb55 upstream. lkp reported a build error, I tried the config and can reproduce build error as below: VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg ld.lld: error: section .note file range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] ld.lld: error: section .text file range overlaps with .dynamic >>> .text range is [0x800, 0x1993] >>> .dynamic range is [0x808, 0x937] ld.lld: error: section .note virtual address range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch tracing for vdso, thus avoid useless _ftrace_annotated_branch section and _ftrace_branch section. Although we can also fix it by removing the hardcoded .text begin address, but I think that's another story and should be put into another patch. Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#rReported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NJisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org Fixes: ad5d1122 ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by: NPalmer Dabbelt <palmer@rivosinc.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 YueHaibing 提交于
stable inclusion from stable-v5.10.158 commit 2b1d8f27e2051d9d35043edbf2e3f4e1354edf59 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2b1d8f27e2051d9d35043edbf2e3f4e1354edf59 -------------------------------- [ Upstream commit 52f7cf70 ] Smatch warns this: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_table.c:81 mlx5dr_table_set_miss_action() error: uninitialized symbol 'ret'. Initializing ret with -EOPNOTSUPP and fix missing action case. Fixes: 7838e172 ("net/mlx5: DR, Expose steering table functionality") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Reviewed-by: NRoi Dayan <roid@nvidia.com> Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yang Yingliang 提交于
stable inclusion from stable-v5.10.158 commit c40db1e5f316792b557d2be37e447c20d9ac4635 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c40db1e5f316792b557d2be37e447c20d9ac4635 -------------------------------- [ Upstream commit 7dec1453 ] As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee6 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.comSigned-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Phil Auld 提交于
stable inclusion from stable-v5.10.158 commit f06e0cd01eab954bd5f2190c9faa79bb5357e05b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f06e0cd01eab954bd5f2190c9faa79bb5357e05b -------------------------------- [ Upstream commit a89ff5f5 ] If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by: NPhil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yoshihiro Shimoda 提交于
stable inclusion from stable-v5.10.158 commit d93522d04f84c81ab9af899957fddfd3c7eb0bb6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d93522d04f84c81ab9af899957fddfd3c7eb0bb6 -------------------------------- [ Upstream commit d66233a3 ] After system resumed on some environment board, the promiscuous mode is disabled because the SoC turned off. So, call ravb_set_rx_mode() in the ravb_resume() to fix the issue. Reported-by: NTho Vu <tho.vu.wh@renesas.com> Fixes: 0184165b ("ravb: add sleep PM suspend/resume support") Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: NSergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Zhengchao Shao 提交于
stable inclusion from stable-v5.10.158 commit 176ee6c673ccd118e9392fd2dbb165423bdb99ca category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=176ee6c673ccd118e9392fd2dbb165423bdb99ca -------------------------------- [ Upstream commit 9ed7bfc7 ] When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://syzkaller.appspot.com/bug?exrid=29c402e56c4760763cc0 Fixes: 637784ad ("sctp: introduce priority based stream scheduler") Reported-by: syzbot+29c402e56c4760763cc0@syzkaller.appspotmail.com Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: NXin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20221126031720.378562-1-shaozhengchao@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Willem de Bruijn 提交于
stable inclusion from stable-v5.10.158 commit 1c38c88acc9688e9e379c26fb64bdfbb853618d1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1c38c88acc9688e9e379c26fb64bdfbb853618d1 -------------------------------- [ Upstream commit b85f628a ] CHECKSUM_COMPLETE signals that skb->csum stores the sum over the entire packet. It does not imply that an embedded l4 checksum field has been validated. Fixes: 682f048b ("af_packet: pass checksum validation status to the user") Signed-off-by: NWillem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Shigeru Yoshida 提交于
stable inclusion from stable-v5.10.158 commit 5f442e1d403e0496bacb74a58e2be7f500695e6f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5f442e1d403e0496bacb74a58e2be7f500695e6f -------------------------------- [ Upstream commit 5daadc86 ] syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. Fixes: 83c1f36f ("tun: send netlink notification when the device is modified") Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1] Signed-off-by: NShigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 David Howells 提交于
stable inclusion from stable-v5.10.158 commit 5fa0fc5876b5979febf6d7c9906afde4489e5c81 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5fa0fc5876b5979febf6d7c9906afde4489e5c81 -------------------------------- [ Upstream commit ca57f022 ] The fileserver probing code attempts to work out the best fileserver to use for a volume by retrieving the RTT calculated by AF_RXRPC for the probe call sent to each server and comparing them. Sometimes, however, no RTT estimate is available and rxrpc_kernel_get_srtt() returns false, leading good fileservers to be given an RTT of UINT_MAX and thus causing the rotation algorithm to ignore them. Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return value and just take the estimated RTT it provides - which will be capped at 1 second. Fixes: 1d4adfaf ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity") Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NMarc Dionne <marc.dionne@auristor.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 YueHaibing 提交于
stable inclusion from stable-v5.10.158 commit 7ca81a161e406834a1fdc405fc83a572bd14b8d9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7ca81a161e406834a1fdc405fc83a572bd14b8d9 -------------------------------- [ Upstream commit 7e177d32 ] The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Xin Long 提交于
stable inclusion from stable-v5.10.158 commit a1ba595e35aa3afbe417ff0af353afb9f65559c0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a1ba595e35aa3afbe417ff0af353afb9f65559c0 -------------------------------- [ Upstream commit 3067bc61 ] As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate(). Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by: NShuang Li <shuali@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Jerry Ray 提交于
stable inclusion from stable-v5.10.158 commit 4621bdfff5f84e511a7f412cfcfea1e920ae03ed category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4621bdfff5f84e511a7f412cfcfea1e920ae03ed -------------------------------- [ Upstream commit 39f59bca ] This patch changes the reported ethtool statistics for the lan9303 family of parts covered by this driver. The TxUnderRun statistic label is renamed to RxShort to accurately reflect what stat the device is reporting. I did not reorder the statistics as that might cause problems with existing user code that are expecting the stats at a certain offset. Fixes: a1292595 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: NJerry Ray <jerry.ray@microchip.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.comSigned-off-by: NJakub Kicinski <kuba@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yuri Karpov 提交于
stable inclusion from stable-v5.10.158 commit 45752af0247589e6d3dede577415bfe117b4392c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=45752af0247589e6d3dede577415bfe117b4392c -------------------------------- [ Upstream commit 9256db4e ] In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: NYuri Karpov <YKarpov@ispras.ru> Reviewed-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Wang Hai 提交于
stable inclusion from stable-v5.10.158 commit e01c1542379fb395e7da53706df598f38905dfbf category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e01c1542379fb395e7da53706df598f38905dfbf -------------------------------- [ Upstream commit dcc14cfd ] Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue. Fixes: 6b18662e ("9p connect fixes") Signed-off-by: NWang Hai <wanghai38@huawei.com> ACKed-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yuan Can 提交于
stable inclusion from stable-v5.10.158 commit b080d4668f3f00298077ab32ec50b1128239d421 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b080d4668f3f00298077ab32ec50b1128239d421 -------------------------------- [ Upstream commit b8f79dcc ] The ntb_netdev_init_module() returns the ntb_transport_register_client() directly without checking its return value, if ntb_transport_register_client() failed, the NTB client device is not unregistered. Fix by unregister NTB client device when ntb_transport_register_client() failed. Fixes: 548c237c ("net: Add support for NTB virtual ethernet device") Signed-off-by: NYuan Can <yuancan@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yang Yingliang 提交于
stable inclusion from stable-v5.10.158 commit fe6bc99c27c21348f548966118867ed26a9a372c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fe6bc99c27c21348f548966118867ed26a9a372c -------------------------------- [ Upstream commit 369eb2c9 ] I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e1393456 ("[PATCH] PHY Layer fixup") Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Lorenzo Bianconi 提交于
stable inclusion from stable-v5.10.158 commit 0184ede0ec61b9cd075babfaa45081b1bf322234 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0184ede0ec61b9cd075babfaa45081b1bf322234 -------------------------------- [ Upstream commit 3e8f7abc ] Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Fixes: db3e1c40 ("mac80211: Import airtime calculation code from mt76") Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org> Acked-by: NToke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Johannes Berg 提交于
stable inclusion from stable-v5.10.158 commit e2ed90fd3ae023a8c15a59c145d8db41ed6bbbd5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e2ed90fd3ae023a8c15a59c145d8db41ed6bbbd5 -------------------------------- [ Upstream commit acd3c92a ] In S1G beacon frames there shouldn't be multi-BSSID elements since that's not supported, remove that to avoid a potential integer underflow and/or misparsing the frames due to the different length of the fixed part of the frame. While at it, initialize non_tx_data so we don't send garbage values to the user (even if it doesn't seem to matter now.) Reported-and-tested-by: NSönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaffe50 ("cfg80211: convert S1G beacon to scan results") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Johannes Berg 提交于
stable inclusion from stable-v5.10.158 commit 9e6b79a3cd17620d467311b30d56f2648f6880aa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9e6b79a3cd17620d467311b30d56f2648f6880aa -------------------------------- [ Upstream commit 9f16b5c8 ] For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. Reported-and-tested-by: NSönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Izabela Bakollari 提交于
stable inclusion from stable-v5.10.158 commit 6922948c2ec1cc45b11acb8ec2eeb3a8353d572b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6922948c2ec1cc45b11acb8ec2eeb3a8353d572b -------------------------------- [ Upstream commit 2a838911 ] IPV6 addresses are purged when setting the number of rx/tx rings using ethtool -G. The function aq_set_ringparam calls dev_close, which removes the addresses. As a solution, call an internal function (aq_ndev_close). Fixes: c1af5427 ("net: aquantia: Ethtool based ring size configuration") Signed-off-by: NIzabela Bakollari <ibakolla@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Duoming Zhou 提交于
stable inclusion from stable-v5.10.158 commit fa59d49a49b06429df16f5353477d35328f02cc8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fa59d49a49b06429df16f5353477d35328f02cc8 -------------------------------- [ Upstream commit 8dbd6e4c ] The watchdog timer is used to monitor whether the process of transmitting data is timeout. If we use qlcnic driver, the dev_watchdog() that is the timer handler of watchdog timer will call qlcnic_tx_timeout() to process the timeout. But the qlcnic_tx_timeout() calls msleep(), as a result, the sleep-in-atomic-context bugs will happen. The processes are shown below: (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver msleep --------------------------- (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver qlcnic_83xx_recover_driver_lock msleep Fix by changing msleep() to mdelay(), the mdelay() is busy-waiting and the bugs could be mitigated. Fixes: 629263ac ("qlcnic: 83xx CNA inter driver communication mechanism") Signed-off-by: NDuoming Zhou <duoming@zju.edu.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Zhang Changzhong 提交于
stable inclusion from stable-v5.10.158 commit d753f554f25d110d0c8269a21d9cce02acdc08f9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d753f554f25d110d0c8269a21d9cce02acdc08f9 -------------------------------- [ Upstream commit 62ec89e7 ] Add the missing free_cc770dev() before return from cc770_isa_probe() in the register_cc770dev() error handling case. In addition, remove blanks before goto labels. Fixes: 7e02e543 ("can: cc770: legacy CC770 ISA bus driver") Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Zhang Changzhong 提交于
stable inclusion from stable-v5.10.158 commit e74746bf0453f3af258d03e448744664c839376b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e74746bf0453f3af258d03e448744664c839376b -------------------------------- [ Upstream commit 92dfd931 ] Add the missing free_sja1000dev() before return from sja1000_isa_probe() in the register_sja1000dev() error handling case. In addition, remove blanks before goto labels. Fixes: 2a6ba39a ("can: sja1000: legacy SJA1000 ISA bus driver") Signed-off-by: NZhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/all/1668168521-5540-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Roi Dayan 提交于
stable inclusion from stable-v5.10.158 commit 0d2f9d95d9fbe993f3c4bafb87d59897b0325aff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0d2f9d95d9fbe993f3c4bafb87d59897b0325aff -------------------------------- [ Upstream commit 52c795af ] When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null. Fixes: 10caabda ("net/mlx5e: Use termination table for VLAN push actions") Signed-off-by: NRoi Dayan <roid@nvidia.com> Reviewed-by: NMaor Dickman <maord@nvidia.com> Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 YueHaibing 提交于
stable inclusion from stable-v5.10.158 commit 2cb84ff34938cc3cdfe2d90e70cf8a8ced66fd1e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2cb84ff34938cc3cdfe2d90e70cf8a8ced66fd1e -------------------------------- [ Upstream commit 3f5769a0 ] If sscanf() return 0, outlen is uninitialized and used in kzalloc(), this is unexpected. We should return -EINVAL if the string is invalid. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Wang Hai 提交于
stable inclusion from stable-v5.10.158 commit b775f37d943966f6f77dca402f5a9dedce502c25 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b775f37d943966f6f77dca402f5a9dedce502c25 -------------------------------- [ Upstream commit 45605c75 ] In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free. Fixes: 5e5d4942 ("e100: Release skb when DMA mapping is failed in e100_xmit_prepare") Signed-off-by: NWang Hai <wanghai38@huawei.com> Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Christophe JAILLET 提交于
stable inclusion from stable-v5.10.158 commit 086f656e447b082c055cab9b059a71cd409e5c60 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=086f656e447b082c055cab9b059a71cd409e5c60 -------------------------------- [ Upstream commit 4140ff1b ] The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'e100_alloc()', GFP_KERNEL can be used because it is only called from the probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Link: https://lore.kernel.org/r/20210128210736.749724-1-christophe.jaillet@wanadoo.frSigned-off-by: NJakub Kicinski <kuba@kernel.org> Stable-dep-of: 45605c75 ("e100: Fix possible use after free in e100_xmit_prepare") Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yuan Can 提交于
stable inclusion from stable-v5.10.158 commit 971c55f0763b480e63ceb7a22beb19be2509e5ed category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=971c55f0763b480e63ceb7a22beb19be2509e5ed -------------------------------- [ Upstream commit 227d8d2f ] The iavf_init_module() won't destroy workqueue when pci_register_driver() failed. Call destroy_workqueue() when pci_register_driver() failed to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002 ("usb: u132-hcd: fix resource leak") Fixes: 2803b16c ("i40e/i40evf: Use private workqueue") Signed-off-by: NYuan Can <yuancan@huawei.com> Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Minghao Chi 提交于
stable inclusion from stable-v5.10.158 commit d389a4c6987708533000130592ddf33bc48b8b0d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d389a4c6987708533000130592ddf33bc48b8b0d -------------------------------- [ Upstream commit c3fec56e ] Return value directly instead of taking this in another redundant variable. Reported-by: NZeal Robot <zealci@zte.com.cn> Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn> Signed-off-by: NCGEL ZTE <cgel.zte@gmail.com> Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 227d8d2f ("iavf: Fix error handling in iavf_init_module()") Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Yuan Can 提交于
stable inclusion from stable-v5.10.158 commit fd4960ea53625105fb8616096b931a977a63a8e5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fd4960ea53625105fb8616096b931a977a63a8e5 -------------------------------- [ Upstream commit 771a794c ] A problem about modprobe fm10k failed is triggered with the following log given: Intel(R) Ethernet Switch Host Interface Driver Copyright(c) 2013 - 2019 Intel Corporation. debugfs: Directory 'fm10k' with parent '/' already present! The reason is that fm10k_init_module() returns fm10k_register_pci_driver() directly without checking its return value, if fm10k_register_pci_driver() failed, it returns without removing debugfs and destroy workqueue, resulting the debugfs of fm10k can never be created later and leaks the workqueue. fm10k_init_module() alloc_workqueue() fm10k_dbg_init() # create debugfs fm10k_register_pci_driver() pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without remove debugfs and destroy workqueue Fix by remove debugfs and destroy workqueue when fm10k_register_pci_driver() returns error. Fixes: 7461fd91 ("fm10k: Add support for debugfs") Fixes: b382bb1b ("fm10k: use separate workqueue for fm10k driver") Signed-off-by: NYuan Can <yuancan@huawei.com> Reviewed-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-
由 Shang XiaoJing 提交于
stable inclusion from stable-v5.10.158 commit dd425cec79baeaad2f93b61647bb41b246856914 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dd425cec79baeaad2f93b61647bb41b246856914 -------------------------------- [ Upstream commit 479dd061 ] i40e_init_module() won't free the debugfs directory created by i40e_dbg_init() when pci_register_driver() failed. Add fail path to call i40e_dbg_exit() to remove the debugfs entries to prevent the bug. i40e: Intel(R) Ethernet Connection XL710 Network Driver i40e: Copyright (c) 2013 - 2019 Intel Corporation. debugfs: Directory 'i40e' with parent '/' already present! Fixes: 41c445ff ("i40e: main driver core") Signed-off-by: NShang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: NLeon Romanovsky <leonro@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: Nsanglipeng <sanglipeng1@jd.com>
-