提交 cc3d2b5f 编写于 作者: G Goh, Wei Sheng 提交者: David S. Miller

net: stmmac: Set MAC's flow control register to reflect current settings

Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.

Fixes: 46f69ded ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: NGoh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: NNoor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 2a838911
......@@ -748,6 +748,8 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
if (fc & FLOW_RX) {
pr_debug("\tReceive Flow-Control ON\n");
flow |= GMAC_RX_FLOW_CTRL_RFE;
} else {
pr_debug("\tReceive Flow-Control OFF\n");
}
writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
......
......@@ -1061,8 +1061,16 @@ static void stmmac_mac_link_up(struct phylink_config *config,
ctrl |= priv->hw->link.duplex;
/* Flow Control operation */
if (tx_pause && rx_pause)
stmmac_mac_flow_ctrl(priv, duplex);
if (rx_pause && tx_pause)
priv->flow_ctrl = FLOW_AUTO;
else if (rx_pause && !tx_pause)
priv->flow_ctrl = FLOW_RX;
else if (!rx_pause && tx_pause)
priv->flow_ctrl = FLOW_TX;
else
priv->flow_ctrl = FLOW_OFF;
stmmac_mac_flow_ctrl(priv, duplex);
if (ctrl != old_ctrl)
writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册