Since the device hierarchy domain was added by commit c98c1822
("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts
have been broken.

Users attempting to setup a per-cpu local IRQ, for example the GIC timer
clock events code in drivers/clocksource/mips-gic-timer.c, the
setup_percpu_irq function would refuse with -EINVAL because the GIC
irqchip driver never called irq_set_percpu_devid so the
IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because
irq_set_percpu_devid was being called from the gic_irq_domain_map
function which is no longer called.

Doing only that runs into further problems because gic_dev_domain_alloc
set the struct irq_chip for all interrupts, local or shared, to
gic_level_irq_controller despite that only being suitable for shared
interrupts. The typical outcome of this is that gic_level_irq_controller
callback functions are called for local interrupts, and then hwirq
number calculations overflow & the driver ends up attempting to access
some invalid register with an address calculated from an invalid hwirq
number. Best case scenario is that this then leads to a bus error. This
is fixed by abstracting the setup of the hwirq & chip to a new function
gic_setup_dev_chip which is used by both the root GIC IRQ domain & the
device domain.

Finally, decoding local interrupts failed because gic_dev_domain_alloc
only called irq_domain_alloc_irqs_parent for shared interrupts. Local
ones were therefore never associated with hwirqs in the root GIC IRQ
domain and the virq in gic_handle_local_int would always be 0. This is
fixed by calling irq_domain_alloc_irqs_parent unconditionally & having
gic_irq_domain_alloc handle both local & shared interrupts, which is
easy due to the aforementioned abstraction of chip setup into
gic_setup_dev_chip.

This fixes use of the MIPS GIC timer for clock events, which has been
broken since c98c1822 ("irqchip/mips-gic: Add device hierarchy
domain") but hadn't been noticed due to a silent fallback to the MIPS
coprocessor 0 count/compare clock events device.

Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls
gic_compute_target_list() which advances the iterator by the number of
CPUs in the cluster.

If gic_compute_target_list() reaches the last CPU it leaves the iterator
pointing at the last CPU. This means the next time round the for_each_cpu()
loop cpumask_next() will be called with an invalid CPU.

This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS:
[    3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000
[    3.077943] CPU1: Booted secondary processor [410fd0f0]
[    3.078542] ------------[ cut here ]------------
[    3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170
[    3.078812] Modules linked in:
[    3.078869]
[    3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188
[    3.078994] Hardware name: Foundation-v8A (DT)
[    3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000
[    3.079145] PC is at gic_raise_softirq+0x12c/0x170
[    3.079226] LR is at gic_raise_softirq+0xa4/0x170
[    3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9
[    3.081139] Call trace:
[    3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10)

[    3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170
[    3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40
[    3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88
[    3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0
[    3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8
[    3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0
[    3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370
[    3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18
[    3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0
[    3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20
[    3.083086] [<ffff000008103f80>] complete+0x40/0x60
[    3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0
[    3.083240] [<00000000808911a4>] 0x808911a4
[    3.113401] Detected PIPT I-cache on CPU2

Avoid updating the iterator if the next call to cpumask_next() would
cause the for_each_cpu() loop to exit.

There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s
eventual call to _find_next_bit() will return early as start >= nbits),
this patch just silences the warning.

Fixes: 021f6537 ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: NJames Morse <james.morse@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The userspace memory region 'mr' is allocated with kzalloc in
__rvt_alloc_mr  however it is incorrectly being freed with vfree in
__rvt_free_mr. Fix this by using kfree to free it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Decrement qp reference when handling error path
in completer to prevent kmem_cache leak.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rxe_requester() is sending a pkt with rxe_xmit_packet() and
then calls rxe_update() to update the wqe and qp's psn values.
But sometimes the response is received before the requester
had time to update the wqe in which case the completer
acts on errornous wqe values.
This fix updates the wqe and qp before actually sending
the request and rolls back when xmit fails.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When handling ack for atomic opcodes like "fetch&add"
or "cmp&swp", the method send_atomic_ack() saves the ack
before sending it, in case it gets lost and never reach the
requester. In which case the method duplicate_request()
will need to find it using the duplicated request.psn.
But send_atomic_ack() used a wrong psn value and thus
the above ack was never found.
This fix uses the ack.psn to locate the ack in case
its needed.
This fix also copies the ack packet to the skb's control buffer
since duplicate_request() will need it when calling rxe_xmit_packet()

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Disable creation of a UDP socket for ipv6 when
CONFIG_IPV6 is not enabeld. Since udp_sock_create6()
returns 0 when CONFIG_IPV6 is not set

[   46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f
[   46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53
[   46.893918] Oops: 0002 [#1] PREEMPT
[   46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e7 #1
[   46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000
[   46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0
[   46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f
[   46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0
[   46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0
[   46.919836]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[   46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0
[   46.924550] Stack:
[   46.926014]  cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008
[   46.931274]  00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000
[   46.936122]  cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74
[   46.942350] Call Trace:
[   46.944403]  [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99
[   46.947689]  [<c1fd48de>] ? net_to_rxe+0x4e/0x4e
[   46.950567]  [<c1fd4bdf>] rxe_net_init+0xe/0xa4
[   46.953147]  [<c2c4507b>] rxe_module_init+0x20/0x4c
[   46.955448]  [<c2bf1c74>] do_one_initcall+0x89/0x113
[   46.957797]  [<c2bf15eb>] ? set_debug_rodata+0xf/0xf
[   46.959966]  [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b
[   46.962262]  [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b
[   46.964418]  [<c232eb54>] kernel_init+0x8/0xd0
[   46.966618]  [<c2333122>] ret_from_kernel_thread+0xe/0x24
[   46.969592]  [<c232eb4c>] ? rest_init+0x6f/0x6f

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the source mac address in the FTE when L2 specification
is provided.

Fixes: 038d2ef8 ('IB/mlx5: Add flow steering support')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

MAD_IFC command is supported only for physical functions (PF)
and when physical port is IB. The proposed fix enforces it.

Fixes: d603c809 ("IB/mlx5: Fix decision on using MAD_IFC")
Reported-by: NDavid Chang <dchang@suse.com>
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Modify the mlx4_ib_diag_counters() to avoid the following error in the
hypervisor when the slave tries to query the hardware counters in SR-IOV
mode.

mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1

Fixes: 3f85f2aa ("IB/mlx4: Add diagnostic hardware counters")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When sending QP1 MAD packets which use a GRH, the source GID
(which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
must be included in the packet GRH.

For SR-IOV, a GID cache is used, since the source GID needs to be the
slave's source GID, and not the Hypervisor's GID. This cache also
included a subnet_prefix. Unfortunately, the subnet_prefix field in
the cache was never initialized (to the default subnet prefix 0xfe80::0).
As a result, this field remained all zeroes.  Therefore, when SR-IOV
was active, all QP1 packets which included a GRH had a source GID
subnet prefix of all-zeroes.

However, the subnet-prefix should initially be 0xfe80::0 (the default
subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
the new subnet prefix must be used in the GRH when sending QP1 packets.
To fix this we now initialize the subnet prefix in the SR-IOV GID cache
to the default subnet prefix. We update the cached value if/when OpenSM
modifies the port's subnet prefix. We take this cached value when sending
QP1 packets when SR-IOV is active.

Note that the value is stored as an atomic64. This eliminates any need
for locking when the subnet prefix is being updated.

Note also that we depend on the FW generating the "port management change"
event for tracking subnet-prefix changes performed by OpenSM. If running
early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
the default subnet prefix still will be stored in the cache; therefore
users who do not modify the subnet prefix will not have a problem).
IF there is a need for such tracking also for early FW, we will add that
capability in a subsequent patch.

Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The indentation in the QP1 GRH flow in procedure build_mlx_header is
really confusing. Fix it, in preparation for a commit which touches
this code.

Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Because of an incorrect bit-masking done on the join state bits, when
handling a join request we failed to detect a difference between the
group join state and the request join state when joining as send only
full member (0x8). This caused the MC join request not to be sent.
This issue is relevant only when SRIOV is enabled and SM supports
send only full member.

This fix separates scope bits and join states bits a nibble each.

Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.

The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.

[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411]  0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960]  0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547]  ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015]  [<ffffffff813fed47>] dump_stack+0x63/0x8c
[18332.801831]  [<ffffffff8109add1>] __warn+0xd1/0xf0
[18332.805403]  [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
[18332.809706]  [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384]  [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031]  [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220]  [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290]  [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911]  [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
[18332.839741]  [<ffffffff81772bd1>] rollback_registered+0x31/0x40
[18332.844091]  [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
[18332.848880]  [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848]  [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474]  [<ffffffff81520c08>] dev_attr_store+0x18/0x30
[18332.862510]  [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
[18332.866349]  [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
[18332.870471]  [<ffffffff81207198>] __vfs_write+0x28/0xe0
[18332.874152]  [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
[18332.878274]  [<ffffffff81208062>] vfs_write+0xa2/0x1a0
[18332.881896]  [<ffffffff812093a6>] SyS_write+0x46/0xa0
[18332.885632]  [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
[18332.889709]  [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---

Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is skb_clone(skb, GFP_KERNEL) in spinlock context
in rxe_rcv_mcast_pkt().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before.  However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.

Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid.  It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below.  To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NWade Berrier <wberrier@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We have CONFIG_BLACKFIN ifdef redefining all musb registers in
musb_regs.h and tusb6010.h is never included causing a build
error with blackfin-allmodconfig and COMPILE_TEST.

Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN
is selected.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NBin Liu <b-liu@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Further testing with false negatives suppressed by commit 293e2421
("rcu: Remove superfluous versions of rcu_read_lock_sched_held()")
identified a few more unprotected uses of RCU from the idle loop.
Because RCU actively ignores idle-loop code (for energy-efficiency
reasons, among other things), using RCU from the idle loop can result
in too-short grace periods, in turn resulting in arbitrary misbehavior.

The affected function is rpm_suspend().

The resulting lockdep-RCU splat is as follows:

------------------------------------------------------------------------

Warning from omap3

===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1112 Not tainted
-------------------------------
include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
 #0:  (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4)
[<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4)
[<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84)
[<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
[<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244)
[<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4)
[<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0)
[<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

------------------------------------------------------------------------
Reported-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
[ rjw: Subject ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

It is wrong to use uninitialized dma_slave_config and configure only
certain fields as the DMAengine driver might look at non initialized
(random data) fields and tries to interpret it.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

It is wrong to use uninitialized dma_slave_config and configure only
certain fields as the DMAengine driver might look at non initialized
(random data) fields and tries to interpret it.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Turns out
commit a0562819 ("drm/i915: Get panel_type from OpRegion panel
details") has regressed quite a few machines. So it looks like we
can't use the panel type from OpRegion on all systems, and yet we
absolutely must use it on some specific systems.

Despite trying, I was unable to find any automagic way to determine
if the OpRegion panel type is respectable or not. The only glimmer
of hope I had was bit 8 in the SCIC response, but that turned out to
not work either (it was always 0 on both types of systems).

So, to fix the regressions without breaking the machine we know to need
the OpRegion panel type, let's just add a quirk for this. Only specific
machines known to require the OpRegion panel type will therefore use
it. Everyone else will fall bck to the VBT panel type.

The only known machine so far is a "Conrac GmbH IX45GM2". The PCI
subsystem ID on this machine is just a generic 8086:2a42, so of no use.
Instead we'll go with a DMI match.

I suspect we can now also revert
commit aeddda06 ("drm/i915: Ignore panel type from OpRegion on SKL")
but let's leave that to a separate patch.

v2: Do the DMI match in the opregion code directly, as dev_priv->quirks
    gets populated too late

Cc: Rob Kramer <rob@solution-space.com>
Cc: Martin van Es <martin@mrvanes.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Marco Krüger <krgsch@gmail.com>
Cc: Sean Greenslade <sean@seangreenslade.com>
Cc: Trudy Tective <bertslany@gmail.com>
Cc: Robin Müller <rm1990@gmx.de>
Cc: Alexander Kobel <a-kobel@a-kobel.de>
Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com>
Cc: Emil Andersen Lauridsen <mine809@gmail.com>
Cc: oceans112@gmail.com
Cc: James Hogan <james@albanarts.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html
References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html
References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363
Fixes: a0562819 ("drm/i915: Get panel_type from OpRegion panel details")
Tested-by: NMarco Krüger <krgsch@gmail.com>
Tested-by: NAlexey Shumitsky <alexey.shumitsky@gmail.com>
Tested-by: NSean Greenslade <sean@seangreenslade.com>
Tested-by: NEmil Andersen Lauridsen <mine809@gmail.com>
Tested-by: NRobin Müller <rm1990@gmx.de>
Tested-by: oceans112@gmail.com
Tested-by: NRob Kramer <rob@solution-space.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com
References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.comAcked-by: NJani Nikula <jani.nikula@intel.com>
(cherry picked from commit c8ebfad7)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This reverts

commit 1c80c25f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed May 18 18:47:12 2016 +0200

    drm/i915/psr: Make idle_frames sensible again

There are panels that needs 4 idle frames before entering PSR,
but VBT is unproperly set.

Also lately it was identified that idle frame count calculated at HW
can be off by 1, what makes the minimum of 2, at least.

Without the current vbt+1 we are with the risk of having HW calculating
0 idle frames and entering PSR when it shouldn't. Regardless the lack
of link training.

[Jani: there is some disagreement on the explanation, but the commit
regresses so revert it is.]

References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 1c80c25f ("drm/i915/psr: Make idle_frames sensible again")
Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473295351-8766-1-git-send-email-rodrigo.vivi@intel.com
(cherry picked from commit 40918e0b)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

A side effect of removing the midlayer from driver loading was the loss
of a useful message announcing to userspace that i915 had successfully
started, e.g.:

	[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
Reported-by: NTimo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Fixes: 8f460e2c ("drm/i915: Demidlayer driver loading")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit bc5ca47c)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the
port itself and its children satisfy a number of conditions.  Once a child
is removed, we recheck those conditions in case the removed device was
blocking the port from suspending.

The rechecking needs to happen *after* the device has been removed from the
bus it resides on.  Otherwise when walking the port's subordinate bus in
pci_bridge_d3_update(), the device being removed would erroneously still be
taken into account.

However the device is removed from the bus_list in pci_destroy_dev() and we
currently recheck *before* that.  Fix it.

Fixes: 9d26d3a8 ("PCI: Put PCIe ports into D3 during suspend")
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NRafael J. Wysocki <mika.westerberg@linux.intel.com>

aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip
lock without disabling interrupts, which can lead to a deadlock if an
interrupt occurs while the lock is held in one of these functions.

Replace irq_gc_{lock,unlock}() calls by
irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from
happening.

Fixes: b1479ebb ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers")
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

A recent change removed the dependency on BLK_DEV_NVME, which implies
the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without
CONFIG_BLOCK we get tons of build errors, e.g.

In file included from drivers/nvme/host/core.c:16:0:
linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
drivers/nvme/host/core.c: In function 'nvme_setup_rw':
drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration]
drivers/nvme/host/nvme.h: In function 'nvme_map_len':
drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration]
drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page':
drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration]

This adds back the specific CONFIG_BLOCK dependency to avoid broken
configurations.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: aa719874 ("nvme: fabrics drivers don't need the nvme-pci driver")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

If there is an error on req->mr, req->mr is set to null, however
the following statement sets req->mr->need_inval causing a null
pointer dereference.  Fix this by bailing out to label 'out' to
immediately return and hence skip over the offending null pointer
dereference.

Fixes: f5b7b559 ("nvme-rdma: Get rid of duplicate variable")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Change nvme-rdma to use the IB Client API to detect device removal.
This has the wonderful benefit of being able to blow away all the
ib/rdma_cm resources for the device being removed.  No craziness about
not destroying the cm_id handling the event.  No deadlocks due to broken
iw_cm/rdma_cm/iwarp dependencies.  And no need to have a bound cm_id
around during controller recovery/reconnect to catch device removal
events.

We don't use the device_add aspect of the ib_client service since we only
want to create resources for an IB device if we have a target utilizing
that device.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).

We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.

Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...

The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

On lubbock board, the probe of the driver crashes by dereferencing very
early a platform_data structure which is not set, in
pxa2xx_configure_sockets().

The stack fixed is :
[    0.244353] SA1111 Microprocessor Companion Chip: silicon revision 1, metal revision 1
[    0.256321] sa1111 sa1111: Providing IRQ336-390
[    0.340899] clocksource: Switched to clocksource oscr0
[    0.472263] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[    0.480469] pgd = c0004000
[    0.483432] [00000004] *pgd=00000000
[    0.487105] Internal error: Oops: f5 [#1] ARM
[    0.491497] Modules linked in:
[    0.494650] CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-rc3-00080-g1aaa68426f0c-dirty #2068
[    0.503229] Hardware name: Intel DBPXA250 Development Platform (aka Lubbock)
[    0.510344] task: c3e42000 task.stack: c3e44000
[    0.514984] PC is at pxa2xx_configure_sockets+0x4/0x24 (drivers/pcmcia/pxa2xx_base.c:227)
[    0.520193] LR is at pcmcia_lubbock_init+0x1c/0x38
[    0.525079] pc : [<c0247c30>]    lr : [<c02479b0>]    psr: a0000053
[    0.525079] sp : c3e45e70  ip : 100019ff  fp : 00000000
[    0.536651] r10: c0828900  r9 : c0434838  r8 : 00000000
[    0.541953] r7 : c0820700  r6 : c0857b30  r5 : c3ec1400  r4 : c0820758
[    0.548549] r3 : 00000000  r2 : 0000000c  r1 : c3c09c40  r0 : c3ec1400
[    0.555154] Flags: NzCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
[    0.562450] Control: 0000397f  Table: a0004000  DAC: 00000053
[    0.568257] Process swapper (pid: 1, stack limit = 0xc3e44190)
[    0.574154] Stack: (0xc3e45e70 to 0xc3e46000)
[    0.578610] 5e60:                                     c4849800 00000000 c3ec1400 c024769c
[    0.586928] 5e80: 00000000 c3ec140c c3c0ee0c c3ec1400 c3ec1434 c020c410 c3ec1400 c3ec1434
[    0.595244] 5ea0: c0820700 c080b408 c0828900 c020c5f8 00000000 c0820700 c020c578 c020ac5c
[    0.603560] 5ec0: c3e687cc c3e71e10 c0820700 00000000 c3c02de0 c020bae4 c03c62f7 c03c62f7
[    0.611872] 5ee0: c3e68780 c0820700 c042e034 00000000 c043c440 c020cdec c080b408 00000005
[    0.620188] 5f00: c042e034 c00096c0 c0034440 c01c730c 20000053 ffffffff 00000000 00000000
[    0.628502] 5f20: 00000000 c3ffcb87 c3ffcb90 c00346ac c3e66ba0 c03f7914 00000092 00000005
[    0.636811] 5f40: 00000005 c03f847c 00000091 c03f847c 00000000 00000005 c0434828 00000005
[    0.645125] 5f60: c043482c 00000092 c043c440 c0828900 c0434838 c0418d2c 00000005 00000005
[    0.653430] 5f80: 00000000 c041858c 00000000 c032e9f0 00000000 00000000 00000000 00000000
[    0.661729] 5fa0: 00000000 c032e9f8 00000000 c000f0f0 00000000 00000000 00000000 00000000
[    0.670020] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    0.678311] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    0.686673] (pxa2xx_configure_sockets) from pcmcia_lubbock_init (/drivers/pcmcia/sa1111_lubbock.c:161)
[    0.696026] (pcmcia_lubbock_init) from pcmcia_probe (/drivers/pcmcia/sa1111_generic.c:213)
[    0.704358] (pcmcia_probe) from driver_probe_device (/drivers/base/dd.c:378 /drivers/base/dd.c:499)
[    0.712848] (driver_probe_device) from __driver_attach (/./include/linux/device.h:983 /drivers/base/dd.c:733)
[    0.721414] (__driver_attach) from bus_for_each_dev (/drivers/base/bus.c:313)
[    0.729723] (bus_for_each_dev) from bus_add_driver (/drivers/base/bus.c:708)
[    0.738036] (bus_add_driver) from driver_register (/drivers/base/driver.c:169)
[    0.746185] (driver_register) from do_one_initcall (/init/main.c:778)
[    0.754561] (do_one_initcall) from kernel_init_freeable (/init/main.c:843 /init/main.c:851 /init/main.c:869 /init/main.c:1016)
[    0.763409] (kernel_init_freeable) from kernel_init (/init/main.c:944)
[    0.771660] (kernel_init) from ret_from_fork (/arch/arm/kernel/entry-common.S:119)
[ 0.779347] Code: c03c6305 c03c631e c03c632e e5903048 (e993000c)
All code
========
   0:	c03c6305 	eorsgt	r6, ip, r5, lsl #6
   4:	c03c631e 	eorsgt	r6, ip, lr, lsl r3
   8:	c03c632e 	eorsgt	r6, ip, lr, lsr #6
   c:	e5903048 	ldr	r3, [r0, #72]	; 0x48
  10:*	e993000c 	ldmib	r3, {r2, r3}		<-- trapping instruction
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound
but was not functional due to no sockets being registered.  This is
because the return code from the lowlevel board initialisation was not
being propagated out of the probe function.  Fix this.
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

SS_STSCHG should be set for an IO card when the BVD1 signal is asserted
low, not high.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Add units to the timing information, so we know that the numbers are
nanoseconds.  The output changes from:

I/O      : 165 (172)
attribute: 300 (316)
common   : 300 (316)

to:

I/O      : 165ns (172ns)
attribute: 300ns (316ns)
common   : 300ns (316ns)
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Fix the reporting of the currently programmed timing information.  These
entries have been showing zero due to the clock rate being a factor of
1000 too big.  With this change, we go from:

I/O      : 165 (0)
attribute: 300 (0)
common   : 300 (0)

to:

I/O      : 165 (172)
attribute: 300 (316)
common   : 300 (316)
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

PCMCIA suspend/resume no longer works since the commit mentioned below,
as the callbacks are no longer made.  Convert the driver to the new
dev_pm_ops, which restores the suspend/resume functionality.  Tested on
the arm arch Assabet platform.

Fixes: aa8e54b5 ("PM / sleep: Go direct_complete if driver has no callbacks")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Some ST platforms contain interconnect (ICN) clocks which must be handed
correctly in order to obtain full functionality of a given IP.  In this
case, if the ICN clocks are not handled properly by the ST SDHCI driver
MMC will break and the following output can be observed:

    [   13.916949] mmc0: Timeout waiting for hardware interrupt.
    [   13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
    [   13.928175] sdhci: Sys addr: 0x00000000 | Version:  0x00001002
    [   13.933999] sdhci: Blk size: 0x00007040 | Blk cnt:  0x00000001
    [   13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
    [   13.945650] sdhci: Present:  0x1fff0206 | Host ctl: 0x00000011
    [   13.951475] sdhci: Power:    0x0000000f | Blk gap:  0x00000080
    [   13.957300] sdhci: Wake-up:  0x00000000 | Clock:    0x00003f07
    [   13.963126] sdhci: Timeout:  0x00000004 | Int stat: 0x00000000
    [   13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
    [   13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
    [   13.980602] sdhci: Caps:     0x21ed3281 | Caps_1:   0x00000000
    [   13.986428] sdhci: Cmd:      0x0000063a | Max curr: 0x00000000
    [   13.992252] sdhci: Host ctl2: 0x00000000
    [   13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
    [   14.001990] sdhci: ===========================================
    [   14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.

A decent point was raised about minimising the use of a local variable that
we 'could' do without.  I've chosen consistency over the possibility of
reducing the local variable count by 1.  Thinking that it's more important
for the code to be grouped and authoured in a similar manner/style for
greater maintainability/readability.

Cc: stable@vger.kernel.org
Tested-by: NPeter Griffin <peter.griffin@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch adds support for Infineon flashloader 0x8087/0x0801.

The flashloader is used in Telit LE940B modem family with Telit
flashing application.
Signed-off-by: NDaniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>

When port is down, tx drop counter update is not needed.
Updating the counter in this case can cause a kernel
panic as when the port is down, ring can be NULL.

Fixes: 63a664b7 ("net/mlx4_en: fix tx_dropped bug")
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a capability check before enabling DCBX.
In addition, it re-organizes the relevant data structures,
and fixes a typo in a define.

Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_en_dcbnl_set_state() returns u8, the return value from
mlx4_en_setup_tc() could be negative in case of failure, so fix that.

Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>