Add decode support for adapter Async Events which report FA-WWN
configuration errors.

Link: https://lore.kernel.org/r/20191018211832.7917-14-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add two new macros to aid in message logging:

Both macros print a message if the corresponding lpfc verbosity setting is
set or the kernel log level is WARNING or more critical.

One macro is for use with a phba structure, the other with a vport
structure.

[mkp: typo]

Link: https://lore.kernel.org/r/20191018211832.7917-13-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, the FW logging facility is a load/boot time parameter which
requires the driver to be unloaded/reloaded or the system rebooted in order
to change its configuration.

Convert the logging facility to allow dynamic enablement and configuration.
Specifically:

 - Convert the feature so that it can be enabled dynamically via an
   attribute.  Additionally, the size of the buffer can be configured
   dynamically.

 - Add locks around states that now may be changing.

 - Tie the feature into debugfs so that the logs can be read at any time.

Link: https://lore.kernel.org/r/20191018211832.7917-12-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The existing "auto eq delay" mechanism was sometimes skipping over an EQ,
not ramping the coalescing down under light load fast enough, and in other
cases never kicked in as cpu sharing by multiple vectors didn't quite add
up right.

Tweak the interrupt mechanism such that:

 - Add a flag to the EQ to force checking for colaescing values when being
   serviced in the interrupt handler.  The flag will be set by any CQ bound
   to the EQ whenever the number of CQ elements process in a single scan
   meets or exceeds the hardware queue notify level. E.g. there's a
   significant number of completions happening.

 - In the heartbeat work item that checks coalescing:

   - Replace the structure that was counting the number of EQs that
     interrupted on a single cpu with a new structure that looks at the EQ
     to see whether EQ currently has a coalescing value (thus it should be
     re-evaluate) or was marked by the new flag indicating heavy
     completions.

   - When a cpu, which may be servicing multiple vectors, had at least 1 EQ
     that should be checked, a new coalescing delay is calculated based on
     the number of interrupts that occurred on the cpu.

   - The new coalescing value is then applied to the EQs that had
     interrupted on the cpu.

Link: https://lore.kernel.org/r/20191018211832.7917-11-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Lower IOps performance with write operations. Perf tool shows lock
contention in dma_pool_alloc and dma_pool_free related to the
txrdy_payload_pool.

The allocations are for dma buffers for XFER_RDY's, which actually are not
needed for the FCP_TRECEIVE command as the command contents are used by the
adapter to generate the IU.

Remove the allocations and the associated buffer pool.  Rather than leaving
NULLs in buffer pointer locations, set command and sgl to indicate skipped
SGLE indexes.

Link: https://lore.kernel.org/r/20191018211832.7917-10-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Slightly rework some error check code paths for better streamlining.

Added compiler unlikely hints to allow slightly better optimization of the
fast-path.

Removed a few pointer checks that were obviously already valid.

Link: https://lore.kernel.org/r/20191018211832.7917-9-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Log message conditional upon vport being NULL dereferences vport to
determine log verbose setting.

Changed to use lpfc_print_log which uses phba to determine the active log
verbose setting.

Fixes: 43bfea1b ("scsi: lpfc: Fix coverity errors on NULL pointer checks")
Link: https://lore.kernel.org/r/20191018211832.7917-8-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In lpfc_abort_handler, the lock acquire order is hbalock (irqsave),
buf_lock (irq) and ring_lock (irq).  The issue is that in two places the
locks are released out of order - the buf_lock and the hbalock - resulting
in the cpu preemption/lock flags getting restored out of order and
deadlocking the cpu.

Fix the unlock order by fully releasing the hbalocks as well.

CC: Zhangguanghui <zhang.guanghui@h3c.com>
Link: https://lore.kernel.org/r/20191018211832.7917-7-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In cases where I/O may be aborted, such as driver unload or link bounces,
the system will crash based on a bad ndlp pointer.

Example:
  RIP: 0010:lpfc_sli4_abts_err_handler+0x15/0x140 [lpfc]
  ...
  lpfc_sli4_io_xri_aborted+0x20d/0x270 [lpfc]
  lpfc_sli4_sp_handle_abort_xri_wcqe.isra.54+0x84/0x170 [lpfc]
  lpfc_sli4_fp_handle_cqe+0xc2/0x480 [lpfc]
  __lpfc_sli4_process_cq+0xc6/0x230 [lpfc]
  __lpfc_sli4_hba_process_cq+0x29/0xc0 [lpfc]
  process_one_work+0x14c/0x390

Crash was caused by a bad ndlp address passed to I/O indicated by the XRI
aborted CQE.  The address was not NULL so the routine deferenced the ndlp
ptr. The bad ndlp also caused the lpfc_sli4_io_xri_aborted to call an
erroneous io handler.  Root cause for the bad ndlp was an lpfc_ncmd that
was aborted, put on the abort_io list, completed, taken off the abort_io
list, sent to lpfc_release_nvme_buf where it was put back on the abort_io
list because the lpfc_ncmd->flags setting LPFC_SBUF_XBUSY was not cleared
on the final completion.

Rework the exchange busy handling to ensure the flags are properly set for
both scsi and nvme.

Fixes: c490850a ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Cc: <stable@vger.kernel.org> # v5.1+
Link: https://lore.kernel.org/r/20191018211832.7917-6-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When operating in private loop mode, PLOGI exchanges are racing and the
driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating
the login with the other end causing the other end to abort its PLOGI as
well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state
machine play out.

Link: https://lore.kernel.org/r/20191018211832.7917-5-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix lockdep error in __lpfc_sli_ringtx_put(): The hbalock is valid for
sli3, but not for sli4.  Change lockdep to look at ring lock if sli4.

Also update comment in __lpfc_sli_issue_iocb_s4() to reflect proper
lock. Note: lockdep check is already correct.

Link: https://lore.kernel.org/r/20191018211832.7917-4-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When the adapter FW is administratively set to RO mode, a FW update
triggered by the driver's sysfs attribute will fail. Currently, the
driver's logging mechanism does not properly parse the adapter return codes
and print a meaningful message.  This oversight prevents quick diagnosis in
the field.

Parse the adapter return codes for Write_Object and write an appropriate
message to the system console.

[mkp: typo]

Link: https://lore.kernel.org/r/20191018211832.7917-3-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, lpfc_nvmet_mrq is always scaled back to the min(lpfc_nvmet_mrq,
lpfc_irq_chann). There's no reason to reduce it to the number of interrupt
vectors.  Rather, it should be scaled down based on the number of hardware
queues for the system (if lower than max of 16).

Change scaling to use hardware queue count rather than interrupt vector
count.

Link: https://lore.kernel.org/r/20191018211832.7917-2-jsmart2021@gmail.comSigned-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/cxlflash/main.c:47:22: warning:
 variable ioarcb set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.

Link: https://lore.kernel.org/r/20191021141957.18828-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NMatthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-4-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

strncmp is currently used for "SendTargets" key and "All" value matching
without checking for trailing garbage. This means that Text request PDUs
with garbage such as "SendTargetsPlease=All" and "SendTargets=Alle" are
processed successfully as if they were "SendTargets=All" requests.
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-3-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

RFC 2307 states:

  For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

   Where A1,A2... are proposed algorithms, in order of preference.
...
   For the Algorithm, as stated in [RFC1994], one value is required to
   be implemented:

       5     (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in
the tokenized Algorithm string, which means that any value starting with
a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by
comparing the entire tokenized string.
Reviewed-by: NLee Duncan <lduncan@suse.com>
Reviewed-by: NMike Christie <mchristi@redhat.com>
Signed-off-by: NDavid Disseldorp <ddiss@suse.de>
Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.deSigned-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Bump version to 50877.

Link: https://lore.kernel.org/r/1571120524-6037-8-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After IOP reset completion, AIF request command is not issued to the
controller. Driver schedules a worker thread to issue a AIF request command
after IOP reset completion.

[mkp: fix zeroday warning]

Link: https://lore.kernel.org/r/1571120524-6037-7-git-send-email-balsundar.p@microsemi.com
Acked-by: Balsundar P < Balsundar.P@microchip.com>
Signed-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently driver waits for the command IOCTL from the firmware and if the
firmware enters nonresponsive state, the driver doesn't respond till the
firmware is responsive again.

Check that firmware is alive, otherwise return -EBUSY.

[mkp: clarified commit desc]

Link: https://lore.kernel.org/r/1571120524-6037-6-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Set 180 second timeout for thor and 60 seconds for src controllers.

Link: https://lore.kernel.org/r/1571120524-6037-5-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Before issuing IOP reset, INTX mode is selected. This is triggering MSGU
lockup and ended in basecode assert. Use DROP_IO command when IOP reset is
sent in preparation for interrupt mode switch.

Link: https://lore.kernel.org/r/1571120524-6037-4-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The problem is the driver detects FastResponse bit set and saves it to
Fib's flags to not check IO response status, but it never clears it for
next IO. Hence the next IO will pick up FastResponse bit to not check
the IO response status and fail to report any type IO error to kernel

Link: https://lore.kernel.org/r/1571120524-6037-3-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic

Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.comSigned-off-by: NBalsundar P <balsundar.p@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetSpanBlock:
drivers/scsi/megaraid/megaraid_sas_fp.c:400:16: warning: variable debugBlk set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function mr_spanset_get_phy_params:
drivers/scsi/megaraid/megaraid_sas_fp.c:713:25: warning: variable fusion set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_sas_fp.c: In function MR_GetPhyParams:
drivers/scsi/megaraid/megaraid_sas_fp.c:815:25: warning: variable fusion set but not used [-Wunused-but-set-variable]

'debugBlk' is introduced by commit 9c915a8c ("[SCSI] megaraid_sas:
Add 9565/9285 specific code"), but never used, so remove it

'fusion' is not used since commit c365178f ("scsi: megaraid_sas:
use adapter_type for all gen controllers")

Link: https://lore.kernel.org/r/1570605824-89133-1-git-send-email-zhengbin13@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, MSI-X vectors name appears in /proc/interrupts is "megasas"
which is same for all the vectors. This patch provides a unique name for
all megaraid_sas controllers and their associated MSI-X interrupts.

Link: https://lore.kernel.org/r/20191007051828.12294-1-chandrakanth.patil@broadcom.comSuggested-by: NKonstantin Shalygin <k0ste@k0ste.ru>
Signed-off-by: NSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: NChandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048753592.11757.3634142461093493860.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NGerry Morong <gerry.morong@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Formatting changes, no functional changes.

Link: https://lore.kernel.org/r/157048753005.11757.2228541207280057256.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Removed some unused manifest constants.

Link: https://lore.kernel.org/r/157048752420.11757.3464951542864727227.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.

Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048751247.11757.1727592925624138646.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048750649.11757.7811056360633694725.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for a timeout on LUN resets.

Link: https://lore.kernel.org/r/157048750055.11757.9689400788261610618.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NMurthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add timeout field in RAID IU.

Link: https://lore.kernel.org/r/157048749461.11757.10013040278241807855.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Nkoshyaji <ajish.koshy@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.

Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NMurthy Bhat <Murthy.Bhat@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhildaReviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This line is indented too far so it's a bit confusing.

Link: https://lore.kernel.org/r/20191004100615.GA823@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix sparse warnings:

drivers/scsi/lpfc/lpfc_nportdisc.c:290:1: warning: symbol 'lpfc_defer_pt2pt_acc' was not declared. Should it be static?

Link: https://lore.kernel.org/r/1570183477-137273-1-git-send-email-zhengbin13@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Reviewed-by: NDick Kennedy <dick.kennedy@broadcom.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add a header include guard just in case.

Link: https://lore.kernel.org/r/20190728164643.16335-1-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20190912180918.6436-15-hmadhani@marvell.comSigned-off-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>