stable inclusion
from stable-v5.10.133
commit 6e95f8caffb3f10e48b100c47e753ca83042fe6f
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6e95f8caffb3f10e48b100c47e753ca83042fe6f

--------------------------------

commit bcb1b6ff upstream.

Just like JMP handling, convert a direct CALL to a retpoline thunk
into a retpoline safe indirect CALL.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.567568238@infradead.orgSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 28ca351296742a9e7506a548acaf7ea3bc9feef0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=28ca351296742a9e7506a548acaf7ea3bc9feef0

--------------------------------

commit 11925185 upstream.

Due to:

  c9c324dc ("objtool: Support stack layout changes in alternatives")

it is now possible to simplify the retpolines.

Currently our retpolines consist of 2 symbols:

 - __x86_indirect_thunk_\reg: the compiler target
 - __x86_retpoline_\reg:  the actual retpoline.

Both are consecutive in code and aligned such that for any one register
they both live in the same cacheline:

  0000000000000000 <__x86_indirect_thunk_rax>:
   0:   ff e0                   jmpq   *%rax
   2:   90                      nop
   3:   90                      nop
   4:   90                      nop

  0000000000000005 <__x86_retpoline_rax>:
   5:   e8 07 00 00 00          callq  11 <__x86_retpoline_rax+0xc>
   a:   f3 90                   pause
   c:   0f ae e8                lfence
   f:   eb f9                   jmp    a <__x86_retpoline_rax+0x5>
  11:   48 89 04 24             mov    %rax,(%rsp)
  15:   c3                      retq
  16:   66 2e 0f 1f 84 00 00 00 00 00   nopw   %cs:0x0(%rax,%rax,1)

The thunk is an alternative_2, where one option is a JMP to the
retpoline. This was done so that objtool didn't need to deal with
alternatives with stack ops. But that problem has been solved, so now
it is possible to fold the entire retpoline into the alternative to
simplify and consolidate unused bytes:

  0000000000000000 <__x86_indirect_thunk_rax>:
   0:   ff e0                   jmpq   *%rax
   2:   90                      nop
   3:   90                      nop
   4:   90                      nop
   5:   90                      nop
   6:   90                      nop
   7:   90                      nop
   8:   90                      nop
   9:   90                      nop
   a:   90                      nop
   b:   90                      nop
   c:   90                      nop
   d:   90                      nop
   e:   90                      nop
   f:   90                      nop
  10:   90                      nop
  11:   66 66 2e 0f 1f 84 00 00 00 00 00        data16 nopw %cs:0x0(%rax,%rax,1)
  1c:   0f 1f 40 00             nopl   0x0(%rax)

Notice that since the longest alternative sequence is now:

   0:   e8 07 00 00 00          callq  c <.altinstr_replacement+0xc>
   5:   f3 90                   pause
   7:   0f ae e8                lfence
   a:   eb f9                   jmp    5 <.altinstr_replacement+0x5>
   c:   48 89 04 24             mov    %rax,(%rsp)
  10:   c3                      retq

17 bytes, we have 15 bytes NOP at the end of our 32 byte slot. (IOW, if
we can shrink the retpoline by 1 byte we can pack it more densely).

 [ bp: Massage commit message. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210326151259.506071949@infradead.org
[bwh: Backported to 5.10:
 - Use X86_FEATRURE_RETPOLINE_LFENCE flag instead of
   X86_FEATURE_RETPOLINE_AMD, since the later renaming of this flag
   has already been applied
 - Adjust context]
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit e68db6f780c6e0ec777045ece0880f5764617394
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e68db6f780c6e0ec777045ece0880f5764617394

--------------------------------

commit 23c1ad53 upstream.

Currently, optimize_nops() scans to see if the alternative starts with
NOPs. However, the emit pattern is:

  141:	\oldinstr
  142:	.skip (len-(142b-141b)), 0x90

That is, when 'oldinstr' is short, the tail is padded with NOPs. This case
never gets optimized.

Rewrite optimize_nops() to replace any trailing string of NOPs inside
the alternative to larger NOPs. Also run it irrespective of patching,
replacing NOPs in both the original and replaced code.

A direct consequence is that 'padlen' becomes superfluous, so remove it.

 [ bp:
   - Adjust commit message
   - remove a stale comment about needing to pad
   - add a comment in optimize_nops()
   - exit early if the NOP verif. loop catches a mismatch - function
     should not not add NOPs in that case
   - fix the "optimized NOPs" offsets output ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210326151259.442992235@infradead.orgSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 9a6471666b7387ba0af70d504fe1602cc3d3e5b2
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9a6471666b7387ba0af70d504fe1602cc3d3e5b2

--------------------------------

This was done by commit 52fa82c2
upstream, but this backport avoids changing all callers of the
old decoder API.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit d9cd21911498a9b423e2bdf728b283e4507e968e
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d9cd21911498a9b423e2bdf728b283e4507e968e

--------------------------------

commit 63c66cde upstream.

No functional changes, just simplification.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-10-bp@alien8.deSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 6bc6875b82a0cb99212c4b78fe7606418888af30
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6bc6875b82a0cb99212c4b78fe7606418888af30

--------------------------------

commit 93281c4a upstream.

Users of the instruction decoder should use this to decode instruction
bytes. For that, have insn*() helpers return an int value to denote
success/failure. When there's an error fetching the next insn byte and
the insn falls short, return -ENODATA to denote that.

While at it, make insn_get_opcode() more stricter as to whether what has
seen so far is a valid insn and if not.

Copy linux/kconfig.h for the tools-version of the decoder so that it can
use IS_ENABLED().

Also, cast the INSN_MODE_KERN dummy define value to (enum insn_mode)
for tools use of the decoder because perf tool builds with -Werror and
errors out with -Werror=sign-compare otherwise.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-5-bp@alien8.deSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 76c513c87f599bc013c582522323a1b117b8f501
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=76c513c87f599bc013c582522323a1b117b8f501

--------------------------------

commit d30c7b82 upstream.

Add an explicit __ignore_sync_check__ marker which will be used to mark
lines which are supposed to be ignored by file synchronization check
scripts, its advantage being that it explicitly denotes such lines in
the code.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-4-bp@alien8.deSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit a3d96c74395e162e880515d711ab96f5959856ec
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a3d96c74395e162e880515d711ab96f5959856ec

--------------------------------

commit 9e761296 upstream.

Rename insn_decode() to insn_decode_from_regs() to denote that it
receives regs as param and uses registers from there during decoding.
Free the former name for a more generic version of the function.

No functional changes.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-2-bp@alien8.deSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit fd80da64cffe952cfd71c1c60085ad2bad7ecb63
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=fd80da64cffe952cfd71c1c60085ad2bad7ecb63

--------------------------------

commit 2fe2a2c7 upstream.

_static_cpu_has() contains a completely open coded version of
ALTERNATIVE_TERNARY(). Replace that with the macro instead.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210311142319.4723-8-jgross@suse.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 341e6178c1cf6225e085de9eaba6216d624d641e
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=341e6178c1cf6225e085de9eaba6216d624d641e

--------------------------------

commit e208b3c4 upstream.

Add ALTERNATIVE_TERNARY support for replacing an initial instruction
with either of two instructions depending on a feature:

  ALTERNATIVE_TERNARY "default_instr", FEATURE_NR,
                      "feature_on_instr", "feature_off_instr"

which will start with "default_instr" and at patch time will,
depending on FEATURE_NR being set or not, patch that with either
"feature_on_instr" or "feature_off_instr".

 [ bp: Add comment ontop. ]
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311142319.4723-7-jgross@suse.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 0c4c698569962d32b76ea8ae13334c81ea647be0
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0c4c698569962d32b76ea8ae13334c81ea647be0

--------------------------------

commit dda7bb76 upstream.

Add support for alternative patching for the case a feature is not
present on the current CPU. For users of ALTERNATIVE() and friends, an
inverted feature is specified by applying the ALT_NOT() macro to it,
e.g.:

  ALTERNATIVE(old, new, ALT_NOT(feature));

Committer note:

The decision to encode the NOT-bit in the feature bit itself is because
a future change which would make objtool generate such alternative
calls, would keep the code in objtool itself fairly simple.

Also, this allows for the alternative macros to support the NOT feature
without having to change them.

Finally, the u16 cpuid member encoding the X86_FEATURE_ flags is not an
ABI so if more bits are needed, cpuid itself can be enlarged or a flags
field can be added to struct alt_instr after having considered the size
growth in either cases.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210311142319.4723-6-jgross@suse.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit c9cf908b89ca3b5aa6563181bf78764ac1ab793e
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c9cf908b89ca3b5aa6563181bf78764ac1ab793e

--------------------------------

commit 5e21a3ec upstream.

Merge arch/x86/include/asm/alternative-asm.h into
arch/x86/include/asm/alternative.h in order to make it easier to use
common definitions later.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210311142319.4723-2-jgross@suse.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 5f93d900b9d33b0d5f7e1a7e455f26aab86875c5
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5f93d900b9d33b0d5f7e1a7e455f26aab86875c5

--------------------------------

commit f4b4bc10 upstream.

The Xen hypercall page is filled with zeros, causing objtool to fall
through all the empty hypercall functions until it reaches a real
function, resulting in a stack state mismatch.

The build-time contents of the hypercall page don't matter because the
page gets rewritten by the hypervisor.  Make it more palatable to
objtool by making each hypervisor function a true empty function, with
nops and a return.

Cc: Juergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/0883bde1d7a1fb3b6a4c952bc0200e873752f609.1611263462.git.jpoimboe@redhat.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit b626e17c11f58d49b01bd8bcdf0e0ec11570b6df
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b626e17c11f58d49b01bd8bcdf0e0ec11570b6df

--------------------------------

commit cde07a4e upstream.

The OBJECT_FILES_NON_STANDARD annotation is used to tell objtool to
ignore a file.  File-level ignores won't work when validating vmlinux.o.

Tweak the ELF metadata and unwind hints to allow objtool to follow the
code.

Cc: Juergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/8b042a09c69e8645f3b133ef6653ba28f896807d.1611263462.git.jpoimboe@redhat.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 3116dee2704bfb3713efa3637a9e65369d019cc4
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3116dee2704bfb3713efa3637a9e65369d019cc4

--------------------------------

commit b735bd3e upstream.

The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very
func-like.  With certain usages it can cause stack state mismatches
because it doesn't set the return address (CFI_RA).

Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom
return stack offset.  Instead they just need to specify a func-like
situation, so the current ret_offset code is hacky for no good reason.

Solve both problems by simplifying the RET_OFFSET handling and
converting it into a more useful UNWIND_HINT_FUNC.

If we end up needing the old 'ret_offset' functionality again in the
future, we should be able to support it pretty easily with the addition
of a custom 'sp_offset' in UNWIND_HINT_FUNC.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com
[bwh: Backported to 5.10:
 - Don't use bswap_if_needed() since we don't have any of the other fixes
   for mixed-endian cross-compilation
 - Adjust context]
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 53e89bc78e4351924a1a1474683d47a00c2633f2
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=53e89bc78e4351924a1a1474683d47a00c2633f2

--------------------------------

commit ecf11ba4 upstream.

There's an inconsistency in how sibling calls are detected in
non-function asm code, depending on the scope of the object.  If the
target code is external to the object, objtool considers it a sibling
call.  If the target code is internal but not a function, objtool
*doesn't* consider it a sibling call.

This can cause some inconsistencies between per-object and vmlinux.o
validation.

Instead, assume only ELF functions can do sibling calls.  This generally
matches existing reality, and makes sibling call validation consistent
between vmlinux.o and per-object.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/0e9ab6f3628cc7bf3bde7aa6762d54d7df19ad78.1611263461.git.jpoimboe@redhat.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 3e674f26528931c6a0f1bc7aa29445b45fdfd62d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3e674f26528931c6a0f1bc7aa29445b45fdfd62d

--------------------------------

commit 31a7424b upstream.

Objtool converts direct retpoline jumps to type INSN_JUMP_DYNAMIC, since
that's what they are semantically.

That conversion doesn't work in vmlinux.o validation because the
indirect thunk function is present in the object, so the intra-object
jump check succeeds before the retpoline jump check gets a chance.

Rearrange the checks: check for a retpoline jump before checking for an
intra-object jump.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/4302893513770dde68ddc22a9d6a2a04aca491dd.1611263461.git.jpoimboe@redhat.comSigned-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 917a4f6348d94d9a3c20d78c800dd4715825362d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=917a4f6348d94d9a3c20d78c800dd4715825362d

--------------------------------

commit c9c324dc upstream.

The ORC unwinder showed a warning [1] which revealed the stack layout
didn't match what was expected.  The problem was that paravirt patching
had replaced "CALL *pv_ops.irq.save_fl" with "PUSHF;POP".  That changed
the stack layout between the PUSHF and the POP, so unwinding from an
interrupt which occurred between those two instructions would fail.

Part of the agreed upon solution was to rework the custom paravirt
patching code to use alternatives instead, since objtool already knows
how to read alternatives (and converging runtime patching infrastructure
is always a good thing anyway).  But the main problem still remains,
which is that runtime patching can change the stack layout.

Making stack layout changes in alternatives was disallowed with commit
7117f16b ("objtool: Fix ORC vs alternatives"), but now that paravirt
is going to be doing it, it needs to be supported.

One way to do so would be to modify the ORC table when the code gets
patched.  But ORC is simple -- a good thing! -- and it's best to leave
it alone.

Instead, support stack layout changes by "flattening" all possible stack
states (CFI) from parallel alternative code streams into a single set of
linear states.  The only necessary limitation is that CFI conflicts are
disallowed at all possible instruction boundaries.

For example, this scenario is allowed:

          Alt1                    Alt2                    Alt3

   0x00   CALL *pv_ops.save_fl    CALL xen_save_fl        PUSHF
   0x01                                                   POP %RAX
   0x02                                                   NOP
   ...
   0x05                           NOP
   ...
   0x07   <insn>

The unwind information for offset-0x00 is identical for all 3
alternatives.  Similarly offset-0x05 and higher also are identical (and
the same as 0x00).  However offset-0x01 has deviating CFI, but that is
only relevant for Alt3, neither of the other alternative instruction
streams will ever hit that offset.

This scenario is NOT allowed:

          Alt1                    Alt2

   0x00   CALL *pv_ops.save_fl    PUSHF
   0x01                           NOP6
   ...
   0x07   NOP                     POP %RAX

The problem here is that offset-0x7, which is an instruction boundary in
both possible instruction patch streams, has two conflicting stack
layouts.

[ The above examples were stolen from Peter Zijlstra. ]

The new flattened CFI array is used both for the detection of conflicts
(like the second example above) and the generation of linear ORC
entries.

BTW, another benefit of these changes is that, thanks to some related
cleanups (new fake nops and alt_group struct) objtool can finally be rid
of fake jumps, which were a constant source of headaches.

[1] https://lkml.kernel.org/r/20201111170536.arx2zbn4ngvjoov7@treble

Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit e9197d768f976199a2356842400df947b4007377
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9197d768f976199a2356842400df947b4007377

--------------------------------

commit b23cc71c upstream.

Create a new struct associated with each group of alternatives
instructions.  This will help with the removal of fake jumps, and more
importantly with adding support for stack layout changes in
alternatives.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 1d516bd72a68e4e610d8e3b5ad99e25807a85947
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1d516bd72a68e4e610d8e3b5ad99e25807a85947

--------------------------------

commit ab4e0744 upstream.

Decouple ORC entries from instructions.  This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which change the stack layout.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit dd87aa5f610be44f195cf5a99b7bc153faf30a3d
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dd87aa5f610be44f195cf5a99b7bc153faf30a3d

--------------------------------

commit 150f17bf upstream.

Replace inline assembly in nested_vmx_check_vmentry_hw
with a call to __vmx_vcpu_run.  The function is not
performance critical, so (double) GPR save/restore
in __vmx_vcpu_run can be tolerated, as far as performance
effects are concerned.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Reviewed-and-tested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NUros Bizjak <ubizjak@gmail.com>
[sean: dropped versioning info from changelog]
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20201231002702.22237077-5-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

conflict:
	arch/x86/kvm/vmx/vmx.h
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.133
commit 0ca2ba6e4d139da809061a25626174f812303b7a
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5PTAS
CVE: CVE-2022-29900,CVE-2022-23816,CVE-2022-29901

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0ca2ba6e4d139da809061a25626174f812303b7a

--------------------------------

commit 6c44221b upstream.

Saves one byte in __vmx_vcpu_run for the same functionality.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NUros Bizjak <ubizjak@gmail.com>
Message-Id: <20201029140457.126965-1-ubizjak@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLin Yujun <linyujun809@huawei.com>
Reviewed-by: NZhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.19-rc2
commit 6cd88243
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5PJ7H
CVE: CVE-2022-39189

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6cd88243c7e03845a450795e134b488fc2afb736

----------------------------------------

If a vCPU is outside guest mode and is scheduled out, it might be in the
process of making a memory access.  A problem occurs if another vCPU uses
the PV TLB flush feature during the period when the vCPU is scheduled
out, and a virtual address has already been translated but has not yet
been accessed, because this is equivalent to using a stale TLB entry.

To avoid this, only report a vCPU as preempted if sure that the guest
is at an instruction boundary.  A rescheduling request will be delivered
to the host physical CPU as an external interrupt, so for simplicity
consider any vmexit *not* instruction boundary except for external
interrupts.

It would in principle be okay to report the vCPU as preempted also
if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the
vmentry/vmexit overhead unnecessarily, and optimistic spinning is
also unlikely to succeed.  However, leave it for later because right
now kvm_vcpu_check_block() is doing memory accesses.  Even
though the TLB flush issue only applies to virtual memory address,
it's very much preferrable to be conservative.
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

conflict:
	arch/x86/kvm/x86.c
Signed-off-by: NGuo Mengqi <guomengqi3@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I5P8OD
CVE: NA

-------------------------------------------------------------------------

The value of 'end' for both for_each_mem_range() and __map_memblock() is
'start + size', not 'start + size - 1'. So if the end value of a memory
block is 4G, then:
	if (eflags && (end >= SZ_4G)) {		//end=SZ_4G
		if (start < SZ_4G) {
			... ...
			start = SZ_4G;
		}
	}

	//Now, start=end=SZ_4G, all [start,...) will be mapped
	__map_memblock(pgdp, start, end, ..xxx..);

Fixes: e26eee76 ("arm64: kdump: Don't force page-level mappings for memory above 4G")
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A
CVE: NA

-------------------------------------------------

etmem, the memory vertical expansion technology,

The existing memory expansion tool etmem swaps out all pages that can be
swapped out for the process by default, unless the page is marked with
lock flag.

The function of swapping out specified pages is added. The process adds
VM_SWAPFLAG flags for pages to be swapped out. The etmem adds filters to
the scanning module and swaps out only these pages.
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A
CVE: NA

-------------------------------------------------

etmem, the memory vertical expansion technology,

In the current etmem process, memory page swapping is implemented by
invoking shrink_page_list. When this interface is invoked for the first
time, pages are added to the swap cache and written to disks.The swap
cache page is reclaimed only when this interface is invoked for the
second time and no process accesses the page.However, in the etmem
process, the user mode scans pages that have been accessed, and the
migration is not delivered to pages that are not accessed by processes.
Therefore, the swap cache may always be occupied.
To solve the preceding problem, add the logic for actively reclaiming
the swap cache.When the swap cache occupies a large amount of memory,
the system proactively scans the LRU linked list and reclaims the
swap cache to save memory within the specified range.
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A
CVE: NA

-------------------------------------------------

etmem, the memory vertical expansion technology,
uses DRAM and high-performance storage new media to form multi-level
memory storage.
By grading the stored data, etmem migrates the classified cold
storage data from the storage medium to the high-performance
storage medium,
so as to achieve the purpose of memory capacity expansion and
memory cost reduction.

When the memory expansion function etmem is running, the native
swap function of the kernel needs to be disabled in certain
scenarios to avoid the impact of kernel swap.

This feature provides the preceding functions.

The /sys/kernel/mm/swap/ directory provides the kernel_swap_enable
sys interface to enable or disable the native swap function
of the kernel.

The default value of /sys/kernel/mm/swap/kernel_swap_enable is true,
that is, kernel swap is enabled by default.

Turn on kernel swap:
	echo true > /sys/kernel/mm/swap/kernel_swap_enable

Turn off kernel swap:
	echo false > /sys/kernel/mm/swap/kernel_swap_enable
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
eature: etmem
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A

-------------------------------------------------

add CONFIG_ETMEM macro definition for etmem feature.
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A
CVE: NA

--------------------------------

enable CONFIG_ETMEM by default.
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: NChao Liu <liuchao173@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

euleros inclusion
category: feature
feature: etmem
bugzilla: https://gitee.com/openeuler/kernel/issues/I5DC4A

-------------------------------------------------

etmem, the memory vertical expansion technology,
uses DRAM and high-performance storage new media to form multi-level
memory storage.

The etmem feature was introduced in the previous commit
(aa7f1d22),but only the config
options for the etmem_swap and etmem_scan modules were added,
and the config options for the etmem feature were not added,
so in this commit, the CONFIG_ETMEM option for
the etmem feature was added
Signed-off-by: Nliubo <liubo254@huawei.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.140
commit c08a104a8bce832f6e7a4e8d9ac091777b9982ea
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5PEDR?from=project-issue
CVE: CVE-2022-39190

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c08a104a8bce832f6e7a4e8d9ac091777b9982ea

--------------------------------

[ Upstream commit e02f0d39 ]

Update nft_data_init() to report EINVAL if chain is already bound.

Fixes: d0e2c7de ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Reported-by: NGwangun Jung <exsociety@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Conflicts:
	net/netfilter/nf_tables_api.c
Signed-off-by: NZiyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v6.0-rc6
commit e8d5dfd1
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5OWZ7
CVE: CVE-2022-2663

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=e8d5dfd1d8747b56077d02664a8838c71ced948e

---------------------------

CTCP messages should only be at the start of an IRC message, not
anywhere within it.

While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request.  As-is, thats enough to make the helper believe that it
saw a CTCP message.

Fixes: 869f37d8 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: NDavid Leadbeater <dgl@dgl.cx>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NLiu Jian <liujian56@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.137
commit 0cc5c6b7567dd4c25b0e92f6be55ed631a36f4cd
category: bugfix
bugzilla: 187457, https://gitee.com/src-openeuler/kernel/issues/I5MEZD
CVE: CVE-2022-2586

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0cc5c6b7567dd4c25b0e92f6be55ed631a36f4cd

--------------------------------

commit 36d5b291 upstream.

When doing lookups for rules on the same batch by using its ID, a rule from
a different chain can be used. If a rule is added to a chain but tries to
be positioned next to a rule from a different chain, it will be linked to
chain2, but the use counter on chain1 would be the one to be incremented.

When looking for rules by ID, use the chain that was used for the lookup by
name. The chain used in the context copied to the transaction needs to
match that same chain. That way, struct nft_rule does not need to get
enlarged with another member.

Fixes: 1a94e38d ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Fixes: 75dd48e2 ("netfilter: nf_tables: Support RULE_ID reference in new rule")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLu Wei <luwei32@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.137
commit 9e7dcb88ec8e85e4a8ad0ea494ea2f90f32d2583
category: bugfix
bugzilla: 187457, https://gitee.com/src-openeuler/kernel/issues/I5MEZD
CVE: CVE-2022-2586

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9e7dcb88ec8e85e4a8ad0ea494ea2f90f32d2583

--------------------------------

commit 95f466d2 upstream.

When doing lookups for chains on the same batch by using its ID, a chain
from a different table can be used. If a rule is added to a table but
refers to a chain in a different table, it will be linked to the chain in
table2, but would have expressions referring to objects in table1.

Then, when table1 is removed, the rule will not be removed as its linked to
a chain in table2. When expressions in the rule are processed or removed,
that will lead to a use-after-free.

When looking for chains by ID, use the table that was used for the lookup
by name, and only return chains belonging to that same table.

Fixes: 837830a4 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLu Wei <luwei32@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.137
commit 1a4b18b1ff11ba26f9a852019d674fde9d1d1cff
category: bugfix
bugzilla: 187457, https://gitee.com/src-openeuler/kernel/issues/I5MEZD
CVE: CVE-2022-2586

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1a4b18b1ff11ba26f9a852019d674fde9d1d1cff

--------------------------------

commit 470ee20e upstream.

When doing lookups for sets on the same batch by using its ID, a set from a
different table can be used.

Then, when the table is removed, a reference to the set may be kept after
the set is freed, leading to a potential use-after-free.

When looking for sets by ID, use the table that was used for the lookup by
name, and only return sets belonging to that same table.

This fixes CVE-2022-2586, also reported as ZDI-CAN-17470.

Reported-by: Team Orca of Sea Security (@seasecresponse)
Fixes: 958bee14 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLu Wei <luwei32@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc5
commit 15cf0b82
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5OVRU
CVE: CVE-2022-3061

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=15cf0b82271b1823fb02ab8c377badba614d95d5

---------------------------

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero in the function
i740fb_check_var().

The following log reveals it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:444 [inline]
RIP: 0010:i740fb_set_par+0x272f/0x3bb0 drivers/video/fbdev/i740fb.c:739
Call Trace:
    fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1036
    do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1112
    fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1191
    vfs_ioctl fs/ioctl.c:51 [inline]
    __do_sys_ioctl fs/ioctl.c:874 [inline]
Signed-off-by: NZheyu Ma <zheyuma97@gmail.com>
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NXia Longlong <xialonglong1@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.14-rc1
commit d80c228d
category: bugfix
bugzilla: 187475, https://gitee.com/openeuler/kernel/issues/I5ME0J
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d80c228d44640f0b47b57a2ca4afa26ef87e16b0

--------------------------------

On the IO submission path, blk_account_io_start() may interrupt
the system interruption. When the interruption returns, the value
of part->stamp may have been updated by other cores, so the time
value collected before the interruption may be less than part->
stamp. So when this happens, we should do nothing to make io_ticks
more accurate? For kernels less than 5.0, this may cause io_ticks
to become smaller, which in turn may cause abnormal ioutil values.
Signed-off-by: NChunguang Xu <brookxu@tencent.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1625521646-1069-1-git-send-email-brookxu.cn@gmail.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

conflict:
	block/blk-core.c
Signed-off-by: NLi Nan <linan122@huawei.com>
Reviewed-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

Merge Pull Request from: @gjiang 
 
AWS arm64 instance needs the driver. Pls consider merge it for the three branches (OLK-5.10, openEuler-22.03-LTS and openEuler-22.09), thanks. 
 
Link:https://gitee.com/openeuler/kernel/pulls/104 
Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> 
Reviewed-by: Liu Chao <liuchao173@huawei.com> 
Reviewed-by: Kai Liu <kai.liu@suse.com> 
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> 

This driver is turned on on x86_64 already. Let's turn it on for arm64
as AWS supports ENA device on their arm64 instance.
Signed-off-by: NKai Liu <kai.liu@suse.com>
Signed-off-by: NGuoqing Jiang <guoqing.jiang@suse.com>

hulk inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I4IMAK
CVE: NA

--------

The patch fixes the problem of cat memory.high_async_ratio.
After this patch, when user cat memory.high_async_ratio, the correct
memory.high_async_ratio will be shown.

Show case:
/sys/fs/cgroup/test # cat memory.high_async_ratio
0
/sys/fs/cgroup/test # echo 90 > memory.high_async_ratio
/sys/fs/cgroup/test # cat memory.high_async_ratio
90
/sys/fs/cgroup/test # echo 85 > memory.high_async_ratio
/sys/fs/cgroup/test # cat memory.high_async_ratio
85
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Reviewed-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>