Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Today driver is able to load a whole FW binary into a specific
location on ASIC. We add support for loading sections from the
same FW binary into different loactions.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Remove unreachable code in gaudi collective flow.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.

Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.

Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: NTal Cohen <talcohen@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Initialize the QMANs that are responsible to submit doorbells to the NIC
engines. Add support for stopping and disabling them, and reset them as
part of the hard-reset procedure of GAUDI. This will allow the user to
submit work to the NICs.

Add support for receiving events on QMAN errors from the firmware.

However, the nic_ports_mask is still initialized to 0. That means this code
won't initialize the QMANs just yet. That will be in a later patch.
Signed-off-by: NOmer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Refactor sync stream implementation by adding more structures for
better readability. In addition reducing allocated resources.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There is missing statement and missing "break;" in the ECC handling
code in gaudi.c
This will cause a wrong behavior upon certain ECC interrupts.
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

We must relocate the coresight mmu configuration to the coresight
flow to make it work in case the first submission is to configure
the profiler.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <ogabbay@kernel.org>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.

There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:

drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  512 |  rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,

Rather than adding one more cast, just fix the type and
remove all the other casts.

Fixes: 0db57535 ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <ogabbay@kernel.org>

There was a copy-paste error, and the wrong define was used for
initializing the QMAN.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200925171415.25663-1-oded.gabbay@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

LDMA registers are configured with a fixed value.
We add new define set which gives the configuration
a proper meaning.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.

We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This is a workaround for H/W bug H3-2116, where if there are more than 16
outstanding completions in the DMA transpose engine, there can be a
deadlock in the engine.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

AXI drain is broken in GAUDI so remove support for enabling it.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Future changes require using a context while handling a command buffer,
and thus need to save the context in the command buffer object.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This commit adds the number of HOPs supported by the device to the
device MMU properties.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Old function pointer that was left when the call to this function pointer
was removed.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

There were a couple of comments where the name ArmCP was still used. Rename
it to CPU-CP.

In addition, rename ArmCP or ARM in log messages to "device CPU".
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Add dma_mmap_coherent() for goya and gaudi to match their use of
dma_alloc_coherent(), see the Link tag for why.

Link: https://lore.kernel.org/lkml/20200609091727.GA23814@lst.de/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zhang Li <li.zhang@bitmain.com>
Cc: Ding Z Nan <oshack@hotmail.com>
Signed-off-by: NHillf Danton <hdanton@sina.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

When shifting a boolean variable by more than 31 bits and putting the
result into a u64 variable, we need to cast the boolean into unsigned 64
bits to prevent possible overflow.
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.

Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: NMoti Haimovski <mhaimovski@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Include linux/bitfield.h only in habanalabs.h, instead of in each and
every file that needs it, as habanalabs.h is already included by all.
Signed-off-by: NTomer Tayar <ttayar@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: Nfarah kassabri <fkassabri@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The driver waits for the TPC vector pipe to be empty before checking if the
TPC kernel has finished executing, but the code doesn't validate that the
pipe was indeed empty, it just wait for it without checking the return
value.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

new_dma_pkt->ctl is assigned a value and then is reassigned a new value
without the first value ever being used.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Use the standard FIELD_PREP() macro instead of << operator to perform
bitmask operations. This ensures type check safety and eliminate compiler
warnings.
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NTomer Tayar <ttayar@habana.ai>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

If there is a failure during the testing of a queue,
to ease up debugging - print the queue id.
Signed-off-by: NDotan Barak <dbarak@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.

The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

The condition was reversed.  It should have been less than instead of
greater than.  The result is that we never enter the loop.

Fixes: fcc6a4e6 ("habanalabs: Extract ECC information from FW")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.
Signed-off-by: NOfir Bitton <obitton@habana.ai>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>