This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX8MQ needs CONFIG_QORIQ_THERMAL for thermal support.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

For imx8m we need a separate small driver to read "speed grading"
information from fuses and determine which OPPs are supported.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable imx-ocotp nvmem driver for fuse access on imx8m family.
The fuse block stores various system information which will be accessed
by client device drivers, e.g. cpufreq driver needs to access fuse for
CPU speed grading setting.  So this nvmem driver gets enabled as
built-in.

Tested on imx8mm-evk.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable mfd and regulator driver for PMIC found on imx8mm-evk boards
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The current lpi2c driver can work on imx8 chips so lets enable it. Also
enable few i2c peripherals found on imx8qxp-mek I2C (some were already
used for other boards).

Sensors enabled as modules because not required for boot.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Basic imx8mm support is already available in linux-next just not
enabled in arm64 defconfig. With this patch imx8mm-evk can boot.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX8MQ needs it for RTC support.
Signed-off-by: NAbel Vesa <abel.vesa@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_IMX_SC_WDT as module to support i.MX system
controller watchdog.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the CONFIG_SPI_IMX option so that i.MX8M can use the
imx spi driver by default.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Commit 7ee7ef24 ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
on

  (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)

were left to being built as modules.

Commit 1f4fa50d ("arm64: defconfig: Regenerate for v4.20") "fixed"
that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.

Thing is, if the rootfs is stored in the on-board flash (which
is the "canonical" way of doing things), we either need these drivers
to be built-in, or we need to fiddle with an initramfs to access that
flash and eventually load the modules installed over there.

The former is the easiest, do that.
Signed-off-by: NValentin Schneider <valentin.schneider@arm.com>
Reviewed-by: NLeo Yan <leo.yan@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The mv-xor DMA driver is used for the XOR engine found in the ARM64
Marvell Armada 3720 SoC, so it makes sense to have it enabled in the
arm64 defconfig. A recent boot-time regression was found in mv-xor,
which would have been more easily noticed with this driver enabled by
default.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>

Build the Agilex platform in the standard arm64 defconfig.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable
PWM fan support in the ARM64 defconfig to support the fan on this board.
Please note that the device-tree PWM fan node is already present for
this board.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable support for Tegra HDA controller in the ARM64 defconfig which is
used by Tegra210, Tegra186 and Tegra194. Please note that the Tegra HDA
controller requires the HDA HDMI/DP codec driver and so enable this as
well.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable the Stratix10 System Manager by default.
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10
service layer, and Altera Freeze Bridge drivers.

Intel Stratix10 service layer driver was added with commit 7ca5ce89
("firmware: add Intel Stratix10 service layer driver").

Intel Stratix10 service layer provides kernel APIs for drivers to request
access to the secure features. Such features include FPGA programming,
remote status update, and read and write secure registers.

While clients of the service layer can be built as modules, the service
layer itself has to be configured as built-in.  The service layer is
dependent on ARCH_STRATIX10.

Enabling Altera Freeze Bridge depends on commit 38cd7ad5
("fpga: altera_freeze_bridge: remove restriction to socfpga").
Signed-off-by: NRichard Gong <richard.gong@intel.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI.
Also do a make savedefconfig to clean up.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable support for RX-8571/RX-8581 RTC by turning on
CONFIG_RTC_DRV_RX8581 as module.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable SUN6I SPI controller for Allwinner ARM64 SoC's.

This would helpful to setup spi flash, for another booting source.
mark it as static since it require during boot.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

It's needed to properly reboot the i.MX8MQ EVK board.
Signed-off-by: NCarlo Caione <ccaione@baylibre.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
Signed-off-by: NCarlo Caione <ccaione@baylibre.com>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable driver support of NXP FlexSPI controller.
Signed-off-by: NYogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable all the i.MX8MQ configs necessary to boot.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NAbel Vesa <abel.vesa@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable basic drivers for imx8qxp booting up support:
SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock,
Uart, MMC, FEC.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This patch enables CONFIG_RTC_DRV_IMX_SC as module by default.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

The Tegra Combined UART is used on some Tegra194 devices as a way of
multiplexing output from multiple producers onto a single physical UART.
Enable this by default so that it can be used as the default console to
write kernel messages to.
Signed-off-by: NThierry Reding <treding@nvidia.com>

The Tegra210 Smaug board uses MAX77621 for both CPU & GPU rail. Note
that max8973 and max77621 share the same driver. So enable this driver
for the PMIC.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable Camera sensor interface for Allwinner SUN6I SoC's.

This support enable V4L2 platform drivers static and
VIDEO_SUN6I_CSI as module.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

The GPIO-based bitbanging I2C driver is required to configure
CSI data, clock pins on CSI block in Allwinner A64 SoC.

Let build it as module.
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

This switches out the old fbdev PL11x driver to the new
DRM driver in the Aarch64/ARM64 defconfig. Some ARM
reference designs use this IP with the Silicon Image
SII902x HDMI bridge so activate both.

The required DTS changes are already in-tree.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Compile the necessary drivers as modules, including codecs, for the
s400 sound card.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

This patch selects PCM3168A which is needed for Kingfisher Sound
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable the R-Car thermal driver as a built-in.
This seems safer than enabling as a module from the point of view of
protecting equipment from overheating.

This driver is used in conjunction with the R-Car V3M (r8a77970),
E3 (r8a77990) and D3 (r8a77995) SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Enable R-Car Gen3 PCIe PHY support, which is needed for PCIe to function
on the Renesas Condor board.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The bcm2835-thermal driver was added with commit ac178e42
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit eb1e6716
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.

Fixes: eb1e6716 ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This reverts commit d9678adb.

Received below report from Stefan.
Revert the commit until CAAM driver dependency cycles are fixed.

this patch in next-20181214 breaks "make modules_install" for
arm64/defconfig on my Ubuntu machine:

DEPMOD  4.20.0-rc6-next-20181214
depmod: ERROR: Found 6 modules in dependency cycles!
depmod: ERROR: Cycle detected: caamalg_desc -> dpaa2_caam -> authenc
depmod: ERROR: Cycle detected: caamalg_desc -> dpaa2_caam -> fsl_mc_dpio
depmod: ERROR: Cycle detected: dpaa2_caam -> caamhash_desc -> dpaa2_caam
depmod: ERROR: Cycle detected: caamalg_desc -> dpaa2_caam -> caamhash_desc -> error
depmod: ERROR: Cycle detected: caamalg_desc -> dpaa2_caam -> caamhash_desc -> caamalg_desc
Reported-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit e8342cc7 ("enable CAAM crypto engine on QorIQ DPAA2 SoCs")
enabled CRYPTO_DEV_FSL_DPAA2_CAAM, which depends on FSL_MC_DPIO,
which is not set. Enable FSL_MC_BUS, and build FSL_MC_DPIO and
CRYPTO_DEV_FSL_DPAA2_CAAM as modules.
Signed-off-by: NMarc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refreshed due to churn]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit e78d57b2 ("pinctrl: mediatek: add pinctrl-moore that
implements the generic pinctrl dt-bindings") made PINCTRL_MT7622
depend on PINCTRL_MTK_MOORE, so it fell off in the refresh.
Add MTK_MOORE, which automatically enables MT7622.
Signed-off-by: NMarc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refresh and minor commit message reword]
Signed-off-by: NOlof Johansson <olof@lixom.net>