stable inclusion
from stable-v5.10.110
commit 051360e51341cd17738d82c15a8226010c7cb7f6
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=051360e51341cd17738d82c15a8226010c7cb7f6

--------------------------------

commit 4a7f62f9 upstream.

The rxrpc_call struct has a timer used to handle various timed events
relating to a call.  This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call.  This causes the timer - which
was already stopped - to get restarted.  Later, the timer dispatch code may
then oops if the timer got deallocated first.

Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer.  If the timer was already
running, the ref is discarded.

The timer completion routine can then pass the ref along to the call's work
item when it queues it.  If the timer or work item where already
queued/running, the extra ref is discarded.

Fixes: a158bdd3 ("rxrpc: Fix call timeouts")
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
Tested-by: NMarc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html
Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.ukSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 8cd30d28da01e6c29fabca1494baba4f11191ac1
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8cd30d28da01e6c29fabca1494baba4f11191ac1

--------------------------------

[ Upstream commit f2dd495a ]

Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.

Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.

Based on patch from Sven Auhagen.

Fixes: c4832c7b ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: NSven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 084be6309f4f7d71cf7cbc4da6a6be513992b69f
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=084be6309f4f7d71cf7cbc4da6a6be513992b69f

--------------------------------

[ Upstream commit 6a7d8cff ]

In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.

In this commit we correct the timeout value in sk_reset_timer()

Fixes: 67879274 ("tipc: buffer overflow handling in listener socket")
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NHoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220321042229.314288-1-hoang.h.le@dektech.com.auSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 5d8162371ce80542f882aaec24fad8bfd9724f9b
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5d8162371ce80542f882aaec24fad8bfd9724f9b

--------------------------------

[ Upstream commit 60b44ca6 ]

During NAT, a tuple collision may occur.  When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification.  This will update the skb data, but not the flow key that
OVS uses.  This means that future flow lookups, and packet matches will
have incorrect data.  This has been supported since
5d50aa83 ("openvswitch: support asymmetric conntrack").

That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called.  As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.

Fixes: 5d50aa83 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <dceara@redhat.com>
Cc: Numan Siddique <nusiddiq@redhat.com>
Signed-off-by: NAaron Conole <aconole@redhat.com>
Acked-by: NEelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 4593c76a659d75d5c6bf2dbecefe01d24a2cb3e1
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4593c76a659d75d5c6bf2dbecefe01d24a2cb3e1

--------------------------------

[ Upstream commit ed0c99dc ]

tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:

tcp_v6_connect():
  tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
  tcp_connect():
     tcp_connect_init():
       tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
     tcp_send_syn_data():
       tp->rx_opt.mss_clamp = tp->advmss

After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.

Thanks to Wei for helping zero in on the problem and the fix!

Fixes: c7bb4b89 ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: NAndre Nash <alnash@fb.com>
Reported-by: NNeil Spring <ntspring@fb.com>
Reviewed-by: NWei Wang <weiwan@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit b0898362188e05b2202656058cc32d98fabf3bac
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b0898362188e05b2202656058cc32d98fabf3bac

--------------------------------

[ Upstream commit 0caf6d99 ]

When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.

Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.

To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/

The way to trigger this issue is e.g. through monitoring the BRVLAN group:

	# bridge monitor vlan &
	# ip link add name br type bridge

Which produces the following citation:

	UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
	shift exponent 32 is too large for 32-bit type 'int'

Fixes: f7fa9b10 ("[NETLINK]: Support dynamic number of multicast groups per netlink family")
Signed-off-by: NPetr Machata <petrm@nvidia.com>
Reviewed-by: NIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 40f3b8dadae8e8509166e31198065bc8f6144ed2
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40f3b8dadae8e8509166e31198065bc8f6144ed2

--------------------------------

[ Upstream commit 544b4dd5 ]

The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.

Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.

Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().

Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.

Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit b441fcdff2ebaab6611cc4f83938f343843d291c
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b441fcdff2ebaab6611cc4f83938f343843d291c

--------------------------------

[ Upstream commit 9fa6b4cd ]

hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.

Fixes: 3c857757 ("Bluetooth: Add directed advertising support through connect()")
Signed-off-by: NNiels Dossche <dossche.niels@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit c037e135391c70d4a3304b5df012d404ad8d3d58
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c037e135391c70d4a3304b5df012d404ad8d3d58

--------------------------------

[ Upstream commit 42bf50a1 ]

When providing the MSG_TRUNC flag via recvmsg() syscall the return value
provides the real length of the packet or datagram, even when it was longer
than the passed buffer.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671
Link: https://lore.kernel.org/all/20220316164258.54155-3-socketcan@hartkopp.netSuggested-by: NDerek Will <derekrobertwill@gmail.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit f402c498651993de361f349ac0cedb9f8622319f
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f402c498651993de361f349ac0cedb9f8622319f

--------------------------------

[ Upstream commit 30ffd533 ]

When reading from an unbound can-isotp socket the syscall blocked
indefinitely. As unbound sockets (without given CAN address information)
do not make sense anyway we directly return -EADDRNOTAVAIL on read()
analogue to the known behavior from sendmsg().

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/349
Link: https://lore.kernel.org/all/20220316164258.54155-2-socketcan@hartkopp.netSuggested-by: NDerek Will <derekrobertwill@gmail.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit cd84ea3920aef936c559b63099ef0013ce6b2325
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd84ea3920aef936c559b63099ef0013ce6b2325

--------------------------------

[ Upstream commit 2486ab43 ]

If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.

tcp_bpf_sendmsg()
 tcp_bpf_send_verdict()
  sk_msg_return()
  tcp_bpf_sendmsg_redir()
   unlikely(!psock))
     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.

This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: NWang Yufen <wangyufen@huawei.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-5-wangyufen@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 7b812a369e6416ab06d83cdd39d8e3f752781dd0
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7b812a369e6416ab06d83cdd39d8e3f752781dd0

--------------------------------

[ Upstream commit 84472b43 ]

In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():

tcp_bpf_send_verdict()
 tosend = msg->sg.size  //msg->sg.size = 22220
 case __SK_REDIRECT:
  sk_msg_return()  //uncharged msg->sg.size(22220) sk->sk_forward_alloc
  tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
 goto more_data;
 tosend = msg->sg.size  //msg->sg.size = 11000
 case __SK_REDIRECT:
  sk_msg_return()  //uncharged msg->sg.size(11000) to sk->sk_forward_alloc

The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.

This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 ? vfs_write+0x237/0x290
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: NWang Yufen <wangyufen@huawei.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-4-wangyufen@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit bec34a91eba3483e1830c02bdd36f8f968642047
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bec34a91eba3483e1830c02bdd36f8f968642047

--------------------------------

[ Upstream commit 9c34e38c ]

If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.

Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wang suggested.

This issue can cause the following info:
WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 kthread+0xe6/0x110
 ret_from_fork+0x22/0x30
 </TASK>

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: NWang Yufen <wangyufen@huawei.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-3-wangyufen@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit 210e7b43d4dad04ddc7782444bc5457089a85bce
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=210e7b43d4dad04ddc7782444bc5457089a85bce

--------------------------------

commit a4a600dd upstream.

When enabling encap for a ipv6 socket without udp_encap_needed_key
increased, UDP GRO won't work for v4 mapped v6 address packets as
sk will be NULL in udp4_gro_receive().

This patch is to enable it by increasing udp_encap_needed_key for
v6 sockets in udp_tunnel_encap_enable(), and correspondingly
decrease udp_encap_needed_key in udpv6_destroy_sock().

v1->v2:
  - add udp_encap_disable() and export it.
v2->v3:
  - add the change for rxrpc and bareudp into one patch, as Alex
    suggested.
v3->v4:
  - move rxrpc part to another patch.
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Tested-by: NAntonio Quartulli <antonio@openvpn.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit d72866a7f5326160d2a9d945a33eb6ef1883e25d
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d72866a7f5326160d2a9d945a33eb6ef1883e25d

--------------------------------

commit 3ea56642 upstream.

Syzbot created an environment that lead to a state machine status that
can not be reached with a compliant CAN ID address configuration.
The provided address information consisted of CAN ID 0x6000001 and 0xC28001
which both boil down to 11 bit CAN IDs 0x001 in sending and receiving.

Sanitize the SFF/EFF CAN ID values before performing the address checks.

Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220316164258.54155-1-socketcan@hartkopp.net
Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit b7b430104a14a05c74297e794a0fe237f822ebb1
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b7b430104a14a05c74297e794a0fe237f822ebb1

--------------------------------

commit 3848e96e upstream.

xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync().
Both xprt_unlock_connect() and xprt_release() call
 ->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect()
which calls mod_timer().

This may result in mod_timer() being called *after* del_timer_sync().
When this happens, the timer may fire long after the xprt has been freed,
and run_timer_softirq() will probably crash.

The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is
always called under ->transport_lock.  So if we take ->transport_lock to
call del_timer_sync(), we can be sure that mod_timer() will run first
(if it runs at all).

Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.110
commit a7e75e5ed4179758b121a3b95f7d8addf70d0d36
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a7e75e5ed4179758b121a3b95f7d8addf70d0d36

--------------------------------

[ Upstream commit 4ff2980b ]

in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().

According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
	if packet is larger than 1280 bytes
		Send ICMPv6 "packet too big" with MTU=1280
                Drop packet
        else
		Encapsulate but do not set the Don't Fragment
                flag in the IPv4 header.  The resulting IPv4
                packet might be fragmented by the IPv4 layer
                on the encapsulator or by some router along
                the IPv4 path.
	endif
else
	if packet is larger than (IPv4 path MTU - 20)
        	Send ICMPv6 "packet too big" with
                MTU = (IPv4 path MTU - 20).
                Drop packet.
        else
                Encapsulate and set the Don't Fragment flag
                in the IPv4 header.
        endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.

After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.

48              2002::10        2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49   0x0000 (0) 2002::10        2002::11 1304         IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50   0x0000 (0) 2002::10        2002::11 200          ESP (SPI=0x00035000)
51              2002::10        2002::11 180          Echo (ping) request
52   0x56dc     2002::10        2002::11 248          IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)

xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1   0x6206 192.168.1.138   192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2   0x6206 2002::10        2002::11    88   IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3   0x0000 2002::10        2002::11    248  ICMPv6    Echo (ping) request
Signed-off-by: NLina Wang <lina.wang@mediatek.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.115
commit 879b075a9a364a325988d4484b74311edfef82a1
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5C0OU
CVE: CVE-2022-1975

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=879b075a9a364a325988d4484b74311edfef82a1

--------------------------------

commit 4071bf12 upstream.

There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...

The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.

This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: 9674da87 ("NFC: Add firmware upload netlink command")
Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD")
Signed-off-by: NDuoming Zhou <duoming@zju.edu.cn>
Reviewed-by: NKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cnSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NXu Jia <xujia39@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.109
commit 5d3ff9542a40ce034416bca03864709540a36016
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AE

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5d3ff9542a40ce034416bca03864709540a36016

--------------------------------

commit 4a2d4496 upstream.

While commit 6a01afcf ("mac80211: mesh: Free ie data when leaving
mesh") fixed a memory leak on mesh leave / teardown it introduced a
potential memory corruption caused by a double free when rejoining the
mesh:

  ieee80211_leave_mesh()
  -> kfree(sdata->u.mesh.ie);
  ...
  ieee80211_join_mesh()
  -> copy_mesh_setup()
     -> old_ie = ifmsh->ie;
     -> kfree(old_ie);

This double free / kernel panics can be reproduced by using wpa_supplicant
with an encrypted mesh (if set up without encryption via "iw" then
ifmsh->ie is always NULL, which avoids this issue). And then calling:

  $ iw dev mesh0 mesh leave
  $ iw dev mesh0 mesh join my-mesh

Note that typically these commands are not used / working when using
wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going
through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join
where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of
default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids
the memory corruption, too.

The issue was first observed in an application which was not using
wpa_supplicant but "Senf" instead, which implements its own calls to
nl80211.

Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh
join function and leaving it solely up to the mesh leave to free the
mesh IE.

Cc: stable@vger.kernel.org
Fixes: 6a01afcf ("mac80211: mesh: Free ie data when leaving mesh")
Reported-by: NMatthias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: NLinus Lüssing <ll@simonwunderlich.de>
Tested-by: NMathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blueSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.109
commit ae8ec5eabb1a0e672e054ef50374f3d8508d6828
bugzilla: https://gitee.com/openeuler/kernel/issues/I574AE

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ae8ec5eabb1a0e672e054ef50374f3d8508d6828

--------------------------------

commit 5e34af41 upstream.

Syzbot found a kernel bug in the ipv6 stack:
LINK: https://syzkaller.appspot.com/bug?id=205d6f11d72329ab8d62a610c44c5e7e25415580
The reproducer triggers it by sending a crafted message via sendmmsg()
call, which triggers skb_over_panic, and crashes the kernel:

skbuff: skb_over_panic: text:ffffffff84647fb4 len:65575 put:65575
head:ffff888109ff0000 data:ffff888109ff0088 tail:0x100af end:0xfec0
dev:<NULL>

Update the check that prevents an invalid packet with MTU equal
to the fregment header size to eat up all the space for payload.

The reproducer can be found here:
LINK: https://syzkaller.appspot.com/text?tag=ReproC&x=1648c83fb00000

Reported-by: syzbot+e223cf47ec8ae183f2a0@syzkaller.appspotmail.com
Signed-off-by: NTadeusz Struk <tadeusz.struk@linaro.org>
Acked-by: NWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220310232538.1044947-1-tadeusz.struk@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc6
commit 4c2c8f03
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5C3A9
CVE: CVE-2022-32296

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4c2c8f03a5ab7cb04ec64724d7d176d00bcc91e5

--------------------------------

Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.

Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.

A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: NMoshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: NYossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: NAmit Klein <aksecurity@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Conflicts:
	net/ipv4/inet_hashtables.c
Signed-off-by: NBaisong Zhong <zhongbaisong@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.119
commit 33f1b4a27abced7ae0f740d2ec3040debf7c4b3c
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5C3A9
CVE: CVE-2022-32296

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=33f1b4a27abced7ae0f740d2ec3040debf7c4b3c

--------------------------------

commit 190cc824 upstream.

RFC 6056 (Recommendations for Transport-Protocol Port Randomization)
provides good summary of why source selection needs extra care.

David Dworken reminded us that linux implements Algorithm 3
as described in RFC 6056 3.3.3

Quoting David :
   In the context of the web, this creates an interesting info leak where
   websites can count how many TCP connections a user's computer is
   establishing over time. For example, this allows a website to count
   exactly how many subresources a third party website loaded.
   This also allows:
   - Distinguishing between different users behind a VPN based on
       distinct source port ranges.
   - Tracking users over time across multiple networks.
   - Covert communication channels between different browsers/browser
       profiles running on the same computer
   - Tracking what applications are running on a computer based on
       the pattern of how fast source ports are getting incremented.

Section 3.3.4 describes an enhancement, that reduces
attackers ability to use the basic information currently
stored into the shared 'u32 hint'.

This change also decreases collision rate when
multiple applications need to connect() to
different destinations.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDavid Dworken <ddworken@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NStefan Ghinea <stefan.ghinea@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Conflicts:
	net/ipv4/inet_hashtables.c
Signed-off-by: NBaisong Zhong <zhongbaisong@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

hulk inclusion
category: bugfix
bugzilla: 186807 https://gitee.com/openeuler/kernel/issues/I5ATLD
CVE: NA

--------------------------------

When we clean up namespace, we have to notify every netdevice that
dev is down. If device that registered too many, the notify time will
take too many CPU time, It will course CPU soft-lockup issue. The
reprocedure is followed:
NIFS=50
for ((i=0; i<$NIFS; i++))
do
        ip netns add dummy-ns$i
        ip netns exec dummy-ns$i ip link set lo up
done

for ((j=0; j<$NIFS; j++))
do
        for ((i=0; i<1000; i++))
        do
                if=eth$j$i
                ip netns exec dummy-ns$j ip link add $if type dummy
                ip netns exec dummy-ns$j ip link set $if up
                done
done

for ((i=0; i<$NIFS; i++))
do
        ip netns del dummy-ns$i
done
The test will result in the following stack. So clean up work must
sleep for a while when notify device down/change.

watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u8:5:288]
Modules linked in:
CPU: 0 PID: 288 Comm: kworker/u8:5 Tainted: G    B             5.10.0+ #5
Hardware name: linux,dummy-virt (DT)
Workqueue: netns cleanup_net
pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
pc : atomic_set include/asm-generic/atomic-instrumented.h:46 [inline]
pc : __alloc_skb+0x268/0x450 net/core/skbuff.c:241
lr : atomic_set include/asm-generic/atomic-instrumented.h:46 [inline]
lr : __alloc_skb+0x268/0x450 net/core/skbuff.c:241
sp : ffff000015607610
x29: ffff000015607610 x28: 00000000ffffffff
x27: 0000000000000001 x26: ffff0000cc9400e0
x25: ffff0000c745c1be x24: 1fffe00002ac0ed0
x23: 0000000000000000 x22: ffff0000cc9400c0
x21: ffff0000c745c234 x20: ffff0000cc940000
x19: ffff0000c745c140 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 1fffe00002ac0f00
x13: 0000000000000000 x12: ffff80001992801d
x11: 1fffe0001992801c x10: ffff80001992801c
x9 : dfffa00000000000 x8 : ffff0000cc9400e3
x7 : 0000000000000001 x6 : ffff80001992801c
x5 : ffff0000cc9400e0 x4 : dfffa00000000000
x3 : ffffa00011529a78 x2 : 0000000000000003
x1 : 0000000000000000 x0 : ffff0000cc9400e0
Call trace:
 atomic_set include/asm-generic/atomic-instrumented.h:46 [inline]
 __alloc_skb+0x268/0x450 net/core/skbuff.c:241
 alloc_skb include/linux/skbuff.h:1107 [inline]
 nlmsg_new include/net/netlink.h:958 [inline]
 rtmsg_ifa+0xf4/0x1e0 net/ipv4/devinet.c:1900
 __inet_del_ifa+0x328/0x650 net/ipv4/devinet.c:427
 inet_del_ifa net/ipv4/devinet.c:465 [inline]
 inetdev_destroy net/ipv4/devinet.c:318 [inline]
 inetdev_event+0x2ac/0xac0 net/ipv4/devinet.c:1599
 notifier_call_chain kernel/notifier.c:83 [inline]
 raw_notifier_call_chain+0x94/0xd0 kernel/notifier.c:410
 call_netdevice_notifiers_info+0x9c/0x14c net/core/dev.c:2047
 call_netdevice_notifiers_extack net/core/dev.c:2059 [inline]
 call_netdevice_notifiers net/core/dev.c:2073 [inline]
 rollback_registered_many+0x3d0/0x7dc net/core/dev.c:9558
 unregister_netdevice_many+0x40/0x1b0 net/core/dev.c:10779
 default_device_exit_batch+0x24c/0x2a0 net/core/dev.c:11262
 ops_exit_list+0xb4/0xd0 net/core/net_namespace.c:192
 cleanup_net+0x2b8/0x540 net/core/net_namespace.c:608
 process_one_work+0x3ec/0xa40 kernel/workqueue.c:2279
 worker_thread+0x110/0x8b0 kernel/workqueue.c:2425
 kthread+0x1ac/0x1fc kernel/kthread.c:313
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1034
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.108
commit ba50073cf4af619f8cec3b50622adbf3ff5e9abd
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ba50073cf4af619f8cec3b50622adbf3ff5e9abd

--------------------------------

[ Upstream commit cb0b430b ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 6d4e5c57 ("net: dsa: get port type at parse time")
Signed-off-by: NMiaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.108
commit 70b7b3c055fd4a464da8da55ff4c1f84269f9b02
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=70b7b3c055fd4a464da8da55ff4c1f84269f9b02

--------------------------------

[ Upstream commit c700525f ]

syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]

Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631

CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b366069 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
 memcpy+0x39/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:225 [inline]
 packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
 ___sys_recvmsg+0x127/0x200 net/socket.c:2674
 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdfd5954c29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29
RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60
R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54
 </TASK>

addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame:
 ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246

this frame has 1 object:
 [32, 160) 'addr'

Memory state around the buggy address:
 ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00
 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
                                                                ^
 ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1
 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00
Reviewed-by: NWei Li <liwei391@huawei.com>

==================================================================

Fixes: 0fb375fb ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220312232958.3535620-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.108
commit 01fac1ca8ab9c950a0c37d6d639404a275cae910
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=01fac1ca8ab9c950a0c37d6d639404a275cae910

--------------------------------

[ Upstream commit 4db4075f ]

Commit 5f9c55c8 ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:

    IPv6 | ext | ... | ext | UDP | ESP | ...

That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.

In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).

Fixes: 5f9c55c8 ("ipv6: check return value of ipv6_skip_exthdr")
Reported-by: NXiumei Mu <xmu@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.108
commit d9fe590970c463163098d7ecca902690b2ad9467
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A9

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d9fe590970c463163098d7ecca902690b2ad9467

--------------------------------

[ Upstream commit 8e6ed963 ]

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8 ("vsock: add multi-transports support")
Reviewed-by: NStefano Garzarella <sgarzare@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.120
commit ea62d169b6e731e0b54abda1d692406f6bc6a696
bugzilla: 186905, https://gitee.com/src-openeuler/kernel/issues/I5B3QZ
CVE: CVE-2022-1966

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ea62d169b6e731e0b54abda1d692406f6bc6a696

--------------------------------

commit 52077804 upstream.

Since 3e135cd4 ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.

cd5125d8 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.

nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.

This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.

The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.

For the record, this is the KASAN splat.

[   85.431824] ==================================================================
[   85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[   85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[   85.434756]
[   85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G        W         5.18.0+ #2
[   85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014

Fixes: 0b2d8a7b ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: NAaron Adams <edg-e@nccgroup.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLu Wei <luwei32@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.115
commit 8a9e7c64f4a02c4c397e55ba379609168ec7df4a
category: bugfix
bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5B79D
CVE: CVE-2022-1974

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8a9e7c64f4a02c4c397e55ba379609168ec7df4a

--------------------------------

commit da5c0f11 upstream.

The device_is_registered() in nfc core is used to check whether
nfc device is registered in netlink related functions such as
nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered()
is protected by device_lock, there is still a race condition between
device_del() and device_is_registered(). The root cause is that
kobject_del() in device_del() is not protected by device_lock.

   (cleanup task)         |     (netlink task)
                          |
nfc_unregister_device     | nfc_fw_download
 device_del               |  device_lock
  ...                     |   if (!device_is_registered)//(1)
  kobject_del//(2)        |   ...
 ...                      |  device_unlock

The device_is_registered() returns the value of state_in_sysfs and
the state_in_sysfs is set to zero in kobject_del(). If we pass check in
position (1), then set zero in position (2). As a result, the check
in position (1) is useless.

This patch uses bool variable instead of device_is_registered() to judge
whether the nfc device is registered, which is well synchronized.

Fixes: 3e256b8f ("NFC: add nfc subsystem core")
Signed-off-by: NDuoming Zhou <duoming@zju.edu.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NBaisong Zhong <zhongbaisong@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.18-rc2
commit 1effe8ca
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I56XHY
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1effe8ca4e34

----------------------------------------------------------------------

Fix a use-after-free when using page_pool with page fragments. We
encountered this problem during normal RX in the hns3 driver:

(1) Initially we have three descriptors in the RX queue. The first one
    allocates PAGE1 through page_pool, and the other two allocate one
    half of PAGE2 each. Page references look like this:

                RX_BD1 _______ PAGE1
                RX_BD2 _______ PAGE2
                RX_BD3 _________/

(2) Handle RX on the first descriptor. Allocate SKB1, eventually added
    to the receive queue by tcp_queue_rcv().

(3) Handle RX on the second descriptor. Allocate SKB2 and pass it to
    netif_receive_skb():

    netif_receive_skb(SKB2)
      ip_rcv(SKB2)
        SKB3 = skb_clone(SKB2)

    SKB2 and SKB3 share a reference to PAGE2 through
    skb_shinfo()->dataref. The other ref to PAGE2 is still held by
    RX_BD3:

                      SKB2 ---+- PAGE2
                      SKB3 __/   /
                RX_BD3 _________/

 (3b) Now while handling TCP, coalesce SKB3 with SKB1:

      tcp_v4_rcv(SKB3)
        tcp_try_coalesce(to=SKB1, from=SKB3)    // succeeds
        kfree_skb_partial(SKB3)
          skb_release_data(SKB3)                // drops one dataref

                      SKB1 _____ PAGE1
                           \____
                      SKB2 _____ PAGE2
                                 /
                RX_BD3 _________/

    In skb_try_coalesce(), __skb_frag_ref() takes a page reference to
    PAGE2, where it should instead have increased the page_pool frag
    reference, pp_frag_count. Without coalescing, when releasing both
    SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now
    when releasing SKB1 and SKB2, two references to PAGE2 will be
    dropped, resulting in underflow.

 (3c) Drop SKB2:

      af_packet_rcv(SKB2)
        consume_skb(SKB2)
          skb_release_data(SKB2)                // drops second dataref
            page_pool_return_skb_page(PAGE2)    // drops one pp_frag_count

                      SKB1 _____ PAGE1
                           \____
                                 PAGE2
                                 /
                RX_BD3 _________/

(4) Userspace calls recvmsg()
    Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we
    release the SKB3 page as well:

    tcp_eat_recv_skb(SKB1)
      skb_release_data(SKB1)
        page_pool_return_skb_page(PAGE1)
        page_pool_return_skb_page(PAGE2)        // drops second pp_frag_count

(5) PAGE2 is freed, but the third RX descriptor was still using it!
    In our case this causes IOMMU faults, but it would silently corrupt
    memory if the IOMMU was disabled.

Change the logic that checks whether pp_recycle SKBs can be coalesced.
We still reject differing pp_recycle between 'from' and 'to' SKBs, but
in order to avoid the situation described above, we also reject
coalescing when both 'from' and 'to' are pp_recycled and 'from' is
cloned.

The new logic allows coalescing a cloned pp_recycle SKB into a page
refcounted one, because in this case the release (4) will drop the right
reference, the one taken by skb_try_coalesce().

Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool")
Suggested-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Acked-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJiantao Xiao <xiaojiantao1@h-partners.com>
Reviewed-by: NJian Shen <shenjian15@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.120
commit c0aff1faf66b6b7a19103f83e6a5d0fdc64b9048
category: bugfix
bugzilla: 186913 https://gitee.com/src-openeuler/kernel/issues/I5B69E
CVE: CVE-2022-1972

--------------------------------

commit fecf31ee upstream.

Add several sanity checks for nft_set_desc_concat_parse():

- validate desc->field_count not larger than desc->field_len array.
- field length cannot be larger than desc->field_len (ie. U8_MAX)
- total length of the concatenation cannot be larger than register array.

Joint work with Florian Westphal.

Fixes: f3a2181e ("netfilter: nf_tables: Support for sets with multiple ranged fields")
Reported-by: <zhangziming.zzm@antgroup.com>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NZhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Reviewed-by: NXiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit 2fad5b6948963bac235eac8261d4cd9165eaf1c2
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2fad5b6948963bac235eac8261d4cd9165eaf1c2

--------------------------------

[ Upstream commit e3d5ea2c ]

If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.

Instead, issue a one time warning and make sure to make progress.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit 3f9a8f8a952c4678594d22b601943ad95c62fa18
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3f9a8f8a952c4678594d22b601943ad95c62fa18

--------------------------------

[ Upstream commit e50b88c4 ]

The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.

Update the bss channel after CSA channel switch completion for P2P client
interface as well.
Signed-off-by: NSreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit 8c70b9b470046c9c5f2badfa3048f120d89722e8
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8c70b9b470046c9c5f2badfa3048f120d89722e8

--------------------------------

[ Upstream commit a6bce782 ]

If an MFP station isn't authorized, the receiver will (or
at least should) drop the action frame since it's a robust
management frame, but if we're not authorized we haven't
installed keys yet. Refuse attempts to start a session as
they'd just time out.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6faf74f91b332ba11285@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit ca142038a54f44ffd407ae2f6c65958f5e382ec6
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ca142038a54f44ffd407ae2f6c65958f5e382ec6

--------------------------------

[ Upstream commit e03c3bba ]

xfrm_migrate cannot handle address family change of an xfrm_state.
The symptons are the xfrm_state will be migrated to a wrong address,
and sending as well as receiving packets wil be broken.

This commit fixes it by breaking the original xfrm_state_clone
method into two steps so as to update the props.family before
running xfrm_init_state. As the result, xfrm_state's inner mode,
outer mode, type and IP header length in xfrm_state_migrate can
be updated with the new address family.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1885354Signed-off-by: NYan Yan <evitayan@google.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit d8889a445b538dbcc25d9a8c118d18228b5bbab5
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d8889a445b538dbcc25d9a8c118d18228b5bbab5

--------------------------------

[ Upstream commit c1aca308 ]

This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.

When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.

Specifically, the code path for performing xfrm_migrate is:
  Stage 1: find policy to migrate with
    xfrm_migrate_policy_find(sel, dir, type, net)
  Stage 2: find and update state(s) with
    xfrm_migrate_state_find(mp, net)
  Stage 3: update endpoint address(es) of template(s) with
    xfrm_policy_migrate(pol, m, num_migrate)

Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.

The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886Signed-off-by: NYan Yan <evitayan@google.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.107
commit bdf0316982f00010d6e56f1379a51cd0568d51cd
bugzilla: https://gitee.com/openeuler/kernel/issues/I574A2

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bdf0316982f00010d6e56f1379a51cd0568d51cd

--------------------------------

commit a3d9001b upstream.

This reverts commit 68ac0f38 because ID
0 was meant to be used for configuring the policy/state without
matching for a specific interface (e.g., Cilium is affected, see
https://github.com/cilium/cilium/pull/18789 and
https://github.com/cilium/cilium/pull/19019).
Signed-off-by: NKai Lueke <kailueke@linux.microsoft.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.106
commit ae7597b47dda2cd9294b8d26443ea7a5abd33880
bugzilla: https://gitee.com/openeuler/kernel/issues/I573US

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ae7597b47dda2cd9294b8d26443ea7a5abd33880

--------------------------------

[ Upstream commit 6c0d8833 ]

valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: NNiels Dossche <dossche.niels@gmail.com>
Reviewed-by: NDavid Ahern <dsahern@kernel.org>
Signed-off-by: NNiels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.beSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.106
commit d15c9f6e3335002fea1c33bc8f71a705fa96976c
bugzilla: https://gitee.com/openeuler/kernel/issues/I573US

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d15c9f6e3335002fea1c33bc8f71a705fa96976c

--------------------------------

[ Upstream commit 4224cfd7 ]

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: Nsuresh kumar <suresh2514@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

stable inclusion
from stable-v5.10.106
commit b7e4d9ba2ddb78801488b4c623875b81fb46b545
bugzilla: https://gitee.com/openeuler/kernel/issues/I573US

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b7e4d9ba2ddb78801488b4c623875b81fb46b545

--------------------------------

[ Upstream commit 633593a8 ]

syzbot reported a kernel infoleak [1] of 4 bytes.

After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()

Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.

[1]

BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 instrument_copy_to_user include/linux/instrumented.h:121 [inline]
 copyout lib/iov_iter.c:154 [inline]
 _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
 copy_to_iter include/linux/uio.h:162 [inline]
 simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
 netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 __sys_recvfrom+0x795/0xa10 net/socket.c:2097
 __do_sys_recvfrom net/socket.c:2115 [inline]
 __se_sys_recvfrom net/socket.c:2111 [inline]
 __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:737 [inline]
 slab_alloc_node mm/slub.c:3247 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1158 [inline]
 netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
 netlink_dump_start include/linux/netlink.h:254 [inline]
 inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
 sock_diag_rcv_msg+0x24a/0x620
 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg net/socket.c:725 [inline]
 sock_write_iter+0x594/0x690 net/socket.c:1061
 do_iter_readv_writev+0xa7f/0xc70
 do_iter_write+0x52c/0x1500 fs/read_write.c:851
 vfs_writev fs/read_write.c:924 [inline]
 do_writev+0x645/0xe00 fs/read_write.c:967
 __do_sys_writev fs/read_write.c:1040 [inline]
 __se_sys_writev fs/read_write.c:1037 [inline]
 __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0

CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 8f840e47 ("sctp: add the sctp_diag.c file")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NXin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYu Liao <liaoyu15@huawei.com>
Reviewed-by: NWei Li <liwei391@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>