Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card-util for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current struct snd_soc_dai_link is supporting multicodec,
and it is supporting legacy style of
	codec_name
	codec_of_node
	code_dai_name
This is handled as single entry of multicodec.

We don't have multicpu support yet, but in the future we will.
In such case, we can use snd_soc_dai_link_component for both
cpu/codec. Then the code will be more simple and readble.

As next step, we want to use it for platform, too.
This patch adds snd_soc_dai_link_component style for platform.
We might have multiplatform support in the future, but we
don't know yet. To avoid un-known issue / complex code,
this patch supports just single-platform as 1st step.

If we could use snd_soc_dai_link_component for all CPU/Codec/Platform,
we will switch to new style, and remove legacy code.
This is prepare for it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now no simple/audio cards are using legacy dai_link style for codec.
Let's remove compatible code.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-scu-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

audi-graph-card and audio-graph-scu-card are very similar driver,
but using different feature. Thus we are keeping synchronization
on these 2 drivers style, because it is easy to confirm / check.

Current big difference between these 2 drivers are "dai_props" on
graph_card_data (= priv).
It will be difficult to keep synchronize if we will add new feature
on audio-graph-scu-card. Thus, this patch synchronize it.

[audio-graph]
struct graph_card_data {
	...
	struct graph_dai_props {
		...
	} *dai_props;
	...
};

[audio-graph-scu]
struct graph_card_data {
	...
	struct asoc_simple_dai *dai_props;
	...
};
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-scu-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

simple-card and simple-scu-card are very similar driver,
but using different feature. Thus we are keeping synchronization
on these 2 drivers style, because it is easy to confirm / check.

Current big difference between these 2 drivers are "dai_props" on
simple_card_data (= priv).
It will be difficult to keep synchronize if we will add new feature
on simple-scu-card. Thus, this patch synchronize it.

[simple]
struct simple_card_data {
	...
	struct simple_dai_props {
		...
	} *dai_props;
	...
};

[simple scu]
struct simple_card_data {
	...
	struct asoc_simple_dai *dai_props;
	...
};
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple_card_utils for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds a S/PDIF enable switch as a SOC_SINGLE.
Signed-off-by: NMatt Flax <flatmax@flatmax.org>
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The cs4265 uses 32 bit transport on the I2S bus. This patch enables native
32 bit mode for machine drivers which use this sound card driver.
Signed-off-by: NMatt Flax <flatmax@flatmax.org>
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The cs4265 driver declares the "MMTLR Data Switch" register setting with
a 0 register value rather then the 0x12 register (CS4265_SPDIF_CTL2).
This incorrect value causes alsamixer to fault with the output :
cannot load mixer controls: Input/output error

This patch corrects the register value. alsamixer now runs.
Signed-off-by: NMatt Flax <flatmax@flatmax.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Unlike the TAS5720, the TAS5722 can be configured to utilize 16-bit wide
slots in TDM mode. This can help easing audio clocking/frequency
requirements.
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The TAS5722 supports modifying volume in 0.25dB steps (as opposed to
0.5dB steps on the TAS5720). Introduce a custom mixer control that
allows taking advantage of this finer output volume granularity.

Also add custom getters/setters for access as the TAS5722 digital volume
controls are split over two registers.
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

McASP have write and read FIFO, each 64 words deep.

From the WFIFOS/RFIFOS registers we can read the amount of data currently
in the FIFO which can be directly reported as delay.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

ALSA: Move hda_codec.h to include/sound

For easier sharing with ASoC.

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add pdm input driver for the device found on the amlogic AXG SoC family
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add the DT binding documentation for axg's PDM input
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Before this patch the only alias provided by the dmic module is:
alias:          platform:dmic-codec

Device instantiated from DT will not probe automatically with this

After this patch, here is the new alias list:
alias:          platform:dmic-codec
alias:          of:N*T*Cdmic-codecC*
alias:          of:N*T*Cdmic-codec

Now the dmic codec probes automatically when instantiated from DT.
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add Kconfig prompt for the generic digital mic to make it configurable
through menuconfig
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

adau17x1_setup_firmware and adau17x1_has_dsp is only used internally, so
making them static instead of exported.
Signed-off-by: NRobert Rosengren <robertr@axis.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Modified some if-statements to make them more clear
Signed-off-by: NKirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: NMark Brown <broonie@kernel.org>

Modified the complete file comments in C++ style, to make them look more
intentional
Signed-off-by: NKirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: NMark Brown <broonie@kernel.org>

Convert to // comments in the leading comment, drop the boilerplate
license text and use the correct MODULE_LICENSE.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NMark Brown <broonie@kernel.org>

25Mhz MCLK which was earlier used was of spread type.
Thus, we were not getting accurate rate. The 48Mhz system
clk is of non-spread type and we are changing to it to get
accurate rate.
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

We support dual channel, 48Khz. This constraint was set only for
da7219. It is being extended to DMIC and MAX98357a.
Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This commit adds support for TI PCM3060 CODEC.
The technical documentation is available at [1].

[1] http://ti.com/product/pcm3060Signed-off-by: NKirill Marinushkin <kmarinushkin@birdec.tech>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: M R Swami Reddy <mr.swami.reddy@ti.com>
Cc: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
Cc: Kevin Cernekee <cernekee@chromium.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NMark Brown <broonie@kernel.org>

Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: NBiju Das <biju.das@bp.renesas.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMark Brown <broonie@kernel.org>

Having the headset buttons send BTN_0, BTN_1 and BTN_2 events is not
really useful. Add mappings to PLAYPAUSE VOLUME_UP and VOLUME_DOWN like
we do in other Intel machine drivers.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Thinkpad 8 tablet uses 10EC5640 as ACPI HID, but it has a rt5670 codec
add a quirk for this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Thinkpad 8 needs a quirk for jack-detect and the internal mic to
work correctly.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Safeload support has been implemented which is used
when updating for instance filter parameters using
alsa controls. Without safeload support audio can
become distorted during update.
Signed-off-by: NDanny Smith <dannys@axis.com>
Signed-off-by: NRobert Rosengren <robertr@axis.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds a kernel module which is used by the legacy HDA
codec drivers as library. This implements hdac_ext_bus_ops to enable
the reuse of legacy HDA codec drivers with ASoC platform drivers.
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use hda_bus instead of hdac_bus in the SKL ASoC platform driver to enable
reuse of legacy HDA codec drivers.
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add support for HDA BE DAIs in SKL platform driver.
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When no I2S based codec entries are found in the BIOS, check if there are
any HDA codecs detected on the bus. Based on the number of codecs found
take appropriate action in machine driver. If there are two HDA codecs
i.e. iDisp + HDA found on the bus, register DAIs and DAI links for both.
If only one codec i.e. iDisp is found then load only iDisp machine driver.
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add machine driver for Intel platforms (SKL/KBL/BXT/APL) with
HDA and iDisp codecs. This patch adds support for only iDisp (HDMI/DP)
codec. In the following patches support for HDA codecs will be added.

This should work for other Intel platforms as well e.g. GLK,CNL
however this series is not tested on all the platforms.
Signed-off-by: NRakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>