Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 9月, 2018 1 次提交
  3. 13 9月, 2018 1 次提交
  5. 11 9月, 2018 1 次提交
  7. 04 9月, 2018 3 次提交
  9. 30 8月, 2018 3 次提交
    • P
      ALSA: hda: move hda_codec.h to include/sound · be57bfff
      由 Pierre-Louis Bossart 提交于 
      As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
      be57bfff
    • T
      ALSA: hda - Fix cancel_work_sync() stall from jackpoll work · 16037643
      由 Takashi Iwai 提交于 
      On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset().  This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.

As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.

This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      16037643
    • T
      ALSA: hda - Clean up jackpoll_ms option handling · 3a182c84
      由 Takashi Iwai 提交于 
      Currently the jackpoll_ms option value is passed indirectly by
referring to an array in chip->jackpoll_ms although each card needs to
see only the assigned value.  Also, the sanity check is done at each
time in get_jackpoll_interval() although basically jackpoll_ms option
is a read-only, hence we need to evaluate only once at probe time.

This patch is the code simplification about the above points: the jack
polling interval is directly set to chip->jackpoll_interval so that it
can be simply copied to each codec.

No functional change but only code reduction.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      3a182c84
  11. 28 8月, 2018 4 次提交
    • T
      ALSA: intel8x0: Use the new non-cached allocation for 440MX workaround · 4985ddbf
      由 Takashi Iwai 提交于 
      intel8x0 driver requires the non-cached pages for 440MX workaround,
and this can be implemented more easily with the new memalloc type,
SNDRV_DMA_TYPE_DEV_UC.  This allows us to reduce lots of code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      4985ddbf
    • T
      ALSA: hda: Remove substream allocation/free ops · 193c7e14
      由 Takashi Iwai 提交于 
      Since we dropped the memory page fiddling in the own allocators in
hda_intel.c, the substream allocation and free ops in both hda_intel.c
and hda_tegra.c became nothing but the simple calls of the standard
snd_pcm_lib helpers.  As both are identical, there is no longer need
for indirect calls via ops; it's a good opportunity for removing ops
and simplifying the codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      193c7e14
    • T
      ALSA: hda: Use new non-cached allocation for non-snoop mode · fc478143
      由 Takashi Iwai 提交于 
      Now the ALSA memory allocator helper supports the new non-cached
pages, let's use the new type, SNDRV_DMA_TYPE_DEV_UC_SG, for HD-audio
driver.  This allows us to reduce lots of codes.

As another positive side-effect by this patch, the long-standing issue
with non-snoop mode playing in the non-mmap mode is fixed.  The core
memalloc helper does the proper pgprot setup for non-cached pages for
vmap(), which was missing in the past.
Reported-and-tested-by: NHans Hu <HansHu@zhaoxin.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      fc478143
    • T
      ALSA: hda: Check the non-cached stream buffers more explicitly · 78c9be61
      由 Takashi Iwai 提交于 
      Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.

Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      78c9be61
  13. 27 8月, 2018 1 次提交
  15. 21 8月, 2018 1 次提交
  17. 16 8月, 2018 1 次提交
    • L
      ALSA: update dell-wmi mic-mute registration to new world order · 70b20dd7
      由 Linus Torvalds 提交于 
      Commit c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED
controls") changed the return value of the snd_hda_gen_add_micmute_led()
without actually updating the callers.

Admittedly, almost no callers actually cared about the return value.
But one call site very much did: the Dell wmi code.  It would see the
registration return zero, which _used_ to mean "failed" but now means
"success", and clear the dell_micmute_led_set_func pointer.

End result: the successful registration would end up calling the Dell
code that thought it had all failed, and call through a NULL pointer.

To make matters worse, it ends up being a tail-call, and with the
retpoline sequence you don't even see the caller (dell_micmute_update())
in the stack trace, so the error ended up way less obvious than it
should have been.

Fixes: c647f806 "ALSA: hda - Allow multiple ADCs for mic mute LED controls"
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      70b20dd7
  19. 09 8月, 2018 12 次提交
  21. 06 8月, 2018 4 次提交
  23. 03 8月, 2018 1 次提交
    • T
      ALSA: pci: Remove empty init and exit · a7da09fe
      由 Takashi Iwai 提交于 
      For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      a7da09fe
  25. 02 8月, 2018 1 次提交
  27. 01 8月, 2018 5 次提交
  29. 29 7月, 2018 1 次提交
    • T
      ALSA: hda/hdmi: Use single mutex unlock in error paths · f69548ff
      由 Takashi Iwai 提交于 
      Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach.  This will
simplify the code and make easier to find the unbalanced mutex locks.

No functional changes, but only the code readability improvement as a
preliminary work for further changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      f69548ff