Since this is an existing asic, adjust the code to follow
the same logic as previously so the driver state is consistent.

No functional change intended.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These have been at production level for a while. Drop
the flag.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.

Fixes: e25443d2 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will cause misconfigured systems to not run the GPU suspend
routines.

* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
  s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
  the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
  present, the dGPU will go through S3
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.

Fixes: e25443d2 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will cause misconfigured systems to not run the GPU suspend
routines.

* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
  s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
  the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
  present, the dGPU will go through S3
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So mesa and tools know when this is available.

Mesa MR: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/207Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Extend secondary function handling for runtime pm beyond audio
to USB and UCSI.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems more logical to enable runtime pm at the end of
the init sequence so we don't end up entering runtime
suspend before init is finished.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements.  Add them to the unsupported list
as well so we don't attempt to bind to them.  The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements.  Add them to the unsupported list
as well so we don't attempt to bind to them.  The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.

Cc: stable@vger.kernel.org
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.

Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.

The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")
Signed-off-by: NLukas Fink <lukas.fink1@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.

Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.

The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29a ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")

Cc: stable@vger.kernel.org
Signed-off-by: NLukas Fink <lukas.fink1@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Freesync Video Mode is a experimental feature previously,
and need to be enabled by kernel parameter. We enable it
by default with removing module paramterter in amdgpu_dm.

v2: squash the patches together
Signed-off-by: NSolomon Chiu <solomon.chiu@amd.com>
Reviewed-by: NAurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it clearer which codepaths are in use specifically in
one state or the other.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we are the primary adapter (i.e., the one used by the firwmare
framebuffer), disable runtime pm.  This fixes a regression caused
by commit 55285e21 which results in the displays waking up
shortly after they go to sleep due to the device coming out of
runtime suspend and sending a hotplug uevent.

v2: squash in reworked fix from Evan

Fixes: 55285e21 ("fbdev/efifb: Release PCI device's runtime PM ref during FB destroy")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the platform suspend happens to fail and the power rail
is not turned off, the GPU will be in an unknown state on
resume, so reset the asic so that it will be in a known
good state on resume even if the platform suspend failed.

v2: handle s0ix
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and
put itself into a state ready for PNP. That can workaround some random resuming
failure observed on BOCO capable platforms.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's not only supported by HG/PX laptops.  It's supported
by all dGPUs which supports BOCO/BACO functionality (runtime
D3).

BOCO - Bus Off, Chip Off.  The entire chip is powered off.
       This is controlled by ACPI.
BACO - Bus Active, Chip Off.  The chip still shows up
       on the PCI bus, but the device itself is powered
       down.

v2: fix missed HG/PX reference
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and
put itself into a state ready for PNP. That can workaround some random resuming
failure observed on BOCO capable platforms.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the platform suspend happens to fail and the power rail
is not turned off, the GPU will be in an unknown state on
resume, so reset the asic so that it will be in a known
good state on resume even if the platform suspend failed.

v2: handle s0ix
Acked-by: NLuben Tuikov <luben.tuikov@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's not only supported by HG/PX laptops.  It's supported
by all dGPUs which supports BOCO/BACO functionality (runtime
D3).

BOCO - Bus Off, Chip Off.  The entire chip is powered off.
       This is controlled by ACPI.
BACO - Bus Active, Chip Off.  The chip still shows up
       on the PCI bus, but the device itself is powered
       down.

v2: fix missed HG/PX reference
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_ucode_get_load_type() does not interpret this parameter as
documented.  It is ignored for many ASIC types (which presumably
only support one load_type), and when not ignored it is only used
to force direct loading instead of PSP loading.  SMU loading is
only available for ASICs for which the parameter is ignored.
Signed-off-by: NYann Dirson <ydirson@free.fr>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.

It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.

Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NPekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com

The nomodeset kernel parameter handler already prints a message that the
DRM drivers will be disabled, so there's no need for drivers to do that.
Suggested-by: NThomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: NJavier Martinez Canillas <javierm@redhat.com>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NPekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-2-javierm@redhat.com

With the shadow buffer support from generic framebuffer emulation, it's
possible now to have runpm kicked when no update for console.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When a GPU hits the bad_page_threshold, it will not be initialized by
the amdgpu driver. This means that the table cannot be cleared, nor can
information gathering be performed (getting serial number, BDF, etc).

If the bad_page_threshold kernel parameter is set to -2,
continue to initialize the GPU, while printing a warning to dmesg that
this action has been done

v2: squash in Luben's fix to restore RAS info reporting

Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: NKent Russell <kent.russell@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ind_block_64b_no_128bcl means INDEP_64B && INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx10.3.

ind_block_64b means INDEP_64B && !INDEP_128B &&
MAX_COMPRESSED_BLOCK_SIZE == 64B. Only used by gfx9 and gfx10.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If you set amdgpu.discovery=2 you can force the the driver to
fetch the IP discovery table from a file rather than from the
table shipped on the device.  This is useful for debugging and
for device bring up and emulation when the tables may be in flux.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For new chips with no explicit entry in the PCI ID list.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Bind to all 0x1002 GPU devices.

For now we explicitly return -ENODEV for generic bindings.
Remove this check once IP discovery based checking is in place.

v2: rebase (Alex)
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Once we claim all 0x1002 PCI display class devices, we will
need to filter out devices owned by radeon.

v2: rename radeon id array to make it more clear that
the devices are not supported by amdgpu.
    add r128, mach64 pci ids as well

Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.

Remove the implementation of mem_encrypt_active() across all arches.

For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de

To support libdrm tests.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Problem:
When device goes into suspend and unplugged during it
then all HW programming during resume fails leading
to a bad SW during pci remove handling which follows.
Because device is first resumed and only later removed
we cannot rely on drm_dev_enter/exit here.

Fix:
Use a flag we use for PCIe error recovery to avoid
accessing registres. This allows to successfully complete
pm resume sequence and finish pci remove.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

New PCI IDs.
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.

DRM IRQ callbacks are now being called directly or inlined.

The interrupt number returned by pci_msi_vector() is now stored
in struct amdgpu_irq. Calls to pci_msi_vector() can fail and return
a negative errno code. Abort initlaizaton in thi case. The DRM IRQ
midlayer does not handle this correctly.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-2-tzimmermann@suse.de

If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org