drm/amdgpu: move runtime pm init after drm and fbdev init

Seems more logical to enable runtime pm at the end of
the init sequence so we don't end up entering runtime
suspend before init is finished.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -1946,6 +1946,22 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
 
 static const struct drm_driver amdgpu_kms_driver;
 
+static void amdgpu_get_audio_func(struct amdgpu_device *adev)
+{
+	struct pci_dev *p = NULL;
+
+	p = pci_get_domain_bus_and_slot(pci_domain_nr(adev->pdev->bus),
+			adev->pdev->bus->number, 1);
+	if (p) {
+		pm_runtime_get_sync(&p->dev);
+
+		pm_runtime_mark_last_busy(&p->dev);
+		pm_runtime_put_autosuspend(&p->dev);
+
+		pci_dev_put(p);
+	}
+}
+
 static int amdgpu_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *ent)
 {
@@ -2071,6 +2087,48 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		DRM_ERROR("Creating debugfs files failed (%d).\n", ret);
 
+	if (adev->runpm) {
+		/* only need to skip on ATPX */
+		if (amdgpu_device_supports_px(ddev))
+			dev_pm_set_driver_flags(ddev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
+		/* we want direct complete for BOCO */
+		if (amdgpu_device_supports_boco(ddev))
+			dev_pm_set_driver_flags(ddev->dev, DPM_FLAG_SMART_PREPARE |
+						DPM_FLAG_SMART_SUSPEND |
+						DPM_FLAG_MAY_SKIP_RESUME);
+		pm_runtime_use_autosuspend(ddev->dev);
+		pm_runtime_set_autosuspend_delay(ddev->dev, 5000);
+
+		pm_runtime_allow(ddev->dev);
+
+		pm_runtime_mark_last_busy(ddev->dev);
+		pm_runtime_put_autosuspend(ddev->dev);
+
+		/*
+		 * For runpm implemented via BACO, PMFW will handle the
+		 * timing for BACO in and out:
+		 *   - put ASIC into BACO state only when both video and
+		 *     audio functions are in D3 state.
+		 *   - pull ASIC out of BACO state when either video or
+		 *     audio function is in D0 state.
+		 * Also, at startup, PMFW assumes both functions are in
+		 * D0 state.
+		 *
+		 * So if snd driver was loaded prior to amdgpu driver
+		 * and audio function was put into D3 state, there will
+		 * be no PMFW-aware D-state transition(D0->D3) on runpm
+		 * suspend. Thus the BACO will be not correctly kicked in.
+		 *
+		 * Via amdgpu_get_audio_func(), the audio dev is put
+		 * into D0 state. Then there will be a PMFW-aware D-state
+		 * transition(D0->D3) on runpm suspend.
+		 */
+		if (amdgpu_device_supports_baco(ddev) &&
+		    !(adev->flags & AMD_IS_APU) &&
+		    (adev->asic_type >= CHIP_NAVI10))
+			amdgpu_get_audio_func(adev);
+	}
+
 	return 0;
 
 err_pci:
@@ -2082,8 +2140,15 @@ static void
 amdgpu_pci_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct amdgpu_device *adev = drm_to_adev(dev);
 
 	drm_dev_unplug(dev);
+
+	if (adev->runpm) {
+		pm_runtime_get_sync(dev->dev);
+		pm_runtime_forbid(dev->dev);
+	}
+
 	amdgpu_driver_unload_kms(dev);
 
 	/*

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c

@@ -87,11 +87,6 @@ void amdgpu_driver_unload_kms(struct drm_device *dev)
 	if (adev->rmmio == NULL)
 		return;
 
-	if (adev->runpm) {
-		pm_runtime_get_sync(dev->dev);
-		pm_runtime_forbid(dev->dev);
-	}
-
 	if (amdgpu_acpi_smart_shift_update(dev, AMDGPU_SS_DRV_UNLOAD))
 		DRM_WARN("smart shift update failed\n");
 
@@ -124,22 +119,6 @@ void amdgpu_register_gpu_instance(struct amdgpu_device *adev)
 	mutex_unlock(&mgpu_info.mutex);
 }
 
-static void amdgpu_get_audio_func(struct amdgpu_device *adev)
-{
-	struct pci_dev *p = NULL;
-
-	p = pci_get_domain_bus_and_slot(pci_domain_nr(adev->pdev->bus),
-			adev->pdev->bus->number, 1);
-	if (p) {
-		pm_runtime_get_sync(&p->dev);
-
-		pm_runtime_mark_last_busy(&p->dev);
-		pm_runtime_put_autosuspend(&p->dev);
-
-		pci_dev_put(p);
-	}
-}
-
 /**
  * amdgpu_driver_load_kms - Main load function for KMS.
  *
@@ -207,58 +186,12 @@ int amdgpu_driver_load_kms(struct amdgpu_device *adev, unsigned long flags)
 	if (acpi_status)
 		dev_dbg(dev->dev, "Error during ACPI methods call\n");
 
-	if (adev->runpm) {
-		/* only need to skip on ATPX */
-		if (amdgpu_device_supports_px(dev))
-			dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
-		/* we want direct complete for BOCO */
-		if (amdgpu_device_supports_boco(dev))
-			dev_pm_set_driver_flags(dev->dev, DPM_FLAG_SMART_PREPARE |
-						DPM_FLAG_SMART_SUSPEND |
-						DPM_FLAG_MAY_SKIP_RESUME);
-		pm_runtime_use_autosuspend(dev->dev);
-		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
-
-		pm_runtime_allow(dev->dev);
-
-		pm_runtime_mark_last_busy(dev->dev);
-		pm_runtime_put_autosuspend(dev->dev);
-
-		/*
-		 * For runpm implemented via BACO, PMFW will handle the
-		 * timing for BACO in and out:
-		 *   - put ASIC into BACO state only when both video and
-		 *     audio functions are in D3 state.
-		 *   - pull ASIC out of BACO state when either video or
-		 *     audio function is in D0 state.
-		 * Also, at startup, PMFW assumes both functions are in
-		 * D0 state.
-		 *
-		 * So if snd driver was loaded prior to amdgpu driver
-		 * and audio function was put into D3 state, there will
-		 * be no PMFW-aware D-state transition(D0->D3) on runpm
-		 * suspend. Thus the BACO will be not correctly kicked in.
-		 *
-		 * Via amdgpu_get_audio_func(), the audio dev is put
-		 * into D0 state. Then there will be a PMFW-aware D-state
-		 * transition(D0->D3) on runpm suspend.
-		 */
-		if (amdgpu_device_supports_baco(dev) &&
-		    !(adev->flags & AMD_IS_APU) &&
-		    (adev->asic_type >= CHIP_NAVI10))
-			amdgpu_get_audio_func(adev);
-	}
-
 	if (amdgpu_acpi_smart_shift_update(dev, AMDGPU_SS_DRV_LOAD))
 		DRM_WARN("smart shift update failed\n");
 
 out:
-	if (r) {
-		/* balance pm_runtime_get_sync in amdgpu_driver_unload_kms */
-		if (adev->rmmio && adev->runpm)
-			pm_runtime_put_noidle(dev->dev);
+	if (r)
 		amdgpu_driver_unload_kms(dev);
-	}
 
 	return r;
 }